JOHN CARTER - Female Helium Soldier ArmorFemale Helium soldier armor from Andrew Stanton's sci-fi action-adventure John Carter. Soldiers of Helium protected their kingdom against the hostile warriors of the Kingdom of Zodanga for more than 1,000 years.This costume consists of a detailed resin helmet painted silver and affixed with a metallic visor; silver-painted resin, metal, and leatherette torso armor labeled "HS114 Jessica Dye" with shoulder pads; matching waist armor embellished with metallic shell-shapes; two teal cloth capes emblazoned with extraterrestrial Helium patterns; a white cotton chest wrap; a pair of matching hand wraps; a pair of blue woven leatherette lace-up bracers; matching leatherette briefs; a pair of matching lace-up greaves; and a pair of blue leather dress boots with silver rubber detailing. The costume exhibits scuffs, stains, grime, and rusting throughout from production wear and exposure. Estimate: $3,500 - 5,500This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
We found 2466194 price guide item(s) matching your search
There are 2466194 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
2466194 item(s)/page
JOHN CARTER - Male Helium Soldier ArmorMale Helium soldier armor from Andrew Stanton's sci-fi action-adventure John Carter. Soldiers of Helium protected their kingdom against the hostile warriors of the Kingdom of Zodanga for more than 1,000 years.This costume consists of a silver painted spiked resin helmet painted silver with a metallic visor; silver-painted resin, metal, and leatherette torso armor labeled "HS11 Bill Settle" with shoulder pads; matching waist armor embellished with metallic shell-shapes; two teal cloth capes emblazoned with extraterrestrial Helium patterns; a white cotton chest wrap; a pair of matching hand wraps; a pair of blue woven leatherette lace-up bracers labeled "HS28 Spencer," "HS10 Kyle Graser," and "Martan Wilde"; matching leatherette briefs; a pair of matching lace-up greaves; and a pair of blue leather dress boots with silver rubber detailing. The costume exhibits visible signs of production wear and exposure, including griminess, stains, and rusting. Estimate: $3,500 - 5,500This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
L̉ۡON: THE PROFESSIONAL - Leon's (Jean Reno) Springfield M1911-A2 SASSLeon's (Jean Reno) Springfield M1911-A2 SASS from Luc Besson's action thriller Leon: The Professional. Leon kept his Springfield Colt in his signature firearms case throughout the film. Though not fired in the final cut, Leon used his M1911-A2 pistol in deleted scenes and promotional materials.Hand-chosen by director Besson himself, this Springfield M1911-A2 SASS pistol features an adapted magazine insert engraved "Springfield Armory USA," which acts as a barrel release as part of a conversion adapting it into a single-shot weapon. Its silver-color main body is engraved with serial number "NM1427." The upgraded barrel attachment, which converts the pistol to a single-shot model capable of firing a variety of calibers, and the textured grip are black. It features a safety and removable magazine.It exhibits scratching throughout with tape applied to the barrel by production. Dimensions: 12" x 6" x 2" (30.5 cm x 15.25 cm x 5 cm)This weapon is a live firearm; see U.S. live firearm notice in the Buyer's Guide. Estimate: $6,000 - 8,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
AVP: ALIEN VS. PREDATOR - Scar's (Ian Whyte) Predator Costume DisplayScar's (Ian Whyte) Predator costume from Paul W.S. Anderson's sci-fi action film AVP: Alien vs. Predator. The Scar Predator was the last survivor of the band of young Predators sent to Earth to prove themselves in the Antarctic pyramid.Created by the artists at Amalgamated Dynamics, Inc. (ADI), this elaborate costume consists of a silver-color fiberglass helmet; a foam latex under-suit with foam dreadlocks on a foam latex cowl with a hole for the performer's face. The suit is finished with hand-painted reptilian markings, over which is worn a cord net, a foam latex neck seal with plastic ring accents, and a faux-leather loincloth. The armor, given a worn silver-color finish, is made of foam rubber sections for the feet and legs, with chest armor, shoulder and arm plates made of foam, rubber and fiberglass. The computer worn on the left wrist is made of rubber and resin, while the right side armor contains extended resin blades. The piece is decorated with an array of rubber skulls and hard rubber pouches, as well as an assortment of weapons, including a rubber shuriken in its closed position and rubber dagger handle in a leg sheath. Fitted on the left shoulder is a rubber plasma caster weapon. Both the plasma caster and shoulder armor exhibit deliberately added flame damage from the sequence where Scar is attacked by Charles Bishop Weyland (Lance Henricksen). The rest of the costume exhibits wear on the foam elements and is set on a custom-made mannequin display. Dimensions: 33" x 27" x 82" (84 cm x 68.25 cm x 208.25 cm)Special shipping required; see notice in the Buyer's Guide. Estimate: $30,000 - 50,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
MARS ATTACKS! - Martian BlasterA Martian blaster from Tim Burton's sci-fi comedy Mars Attacks!. Martians used their blasters to vaporize the U.S. Congress and attack Washington D.C. as well as several other cities in their plan to terrorize the Earth.This otherworldly blaster is constructed from resin painted red, green, gray, and silver-color. Following production, it was sympathetically restored to reattach the tip to the body. It remains fragile and exhibits visible signs of production use, including fractures and cracking throughout the resin, and should be handled with caution. Dimensions: 12.5" x 7" x 2.5" (31.75 cm x 18 cm x 6.5 cm) Estimate: $4,000 - 6,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
THOR - Thor's (Chris Hemsworth) Stunt Mjolnir Hammer from Official Marvel Studios AuctionThor's (Chris Hemsworth) stunt Mjolnir hammer from Kenneth Branagh's superhero adventure Thor. Gifted to him by his father, Odin (Anthony Hopkins), thunder god Thor wielded Mjolnir as his signature weapon and as a mode of flight until it was taken from him and sent to Earth, where Thor had to prove himself worthy enough to wield his hammer again.This lightweight stunt hammer's head is made of dense, rigid foam rubber engraved with intricate Nordic designs and runes on the outer sections. It is painted in dark gray to resemble battle-damaged steel and features a brown leather-wrapped PVC pipe handle with a repeating silver-color pattern running along its length. A small brown leather wrist loop is attached to the end of the handle. This hammer was originally sold in the officially-licensed Captain America: The First Avenger Auction in 2012, making it one of the few Thor hammers that Marvel Studios ever sold directly. It exhibits some wear, with small cracking and chipping of the finish on the hammer's head and some loosening of the handle. Dimensions: 24" x 10" x 5.5" (61 cm x 25.5 cm x 14 cm) Estimate: $100,000 - 150,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
ROBOCOP 2014 - RoboCop's (Joel Kinnaman) Light-Up TSR-66 Taser PistolRoboCop's (Joel Kinnaman) light-up TSR-66 taser pistol from Jose Padilha's sci-fi action remake RoboCop. RoboCop's primary sidearm, the TSR-66, was a cartridge-driven taser pistol that fired projectiles capable of releasing up to 200,000 volts.This weapon uses a Beretta pistol, modified to fire blanks for the film industry, as a base with a custom 3D-printed shell over it featuring a matte black finish, the OmniCorp Weapons Division logo, silver-color side vents, and red light-up meters activated by a switch under the barrel. The printed slide cover has a damaged internal catch and therefore can no longer pull the pistol's slide. Dimensions: 13" x 7.5" x 1.75" (33.25 cm x 19.25 cm x 4.25 cm)Contains electronic components; see notice in the Buyer's Guide.This weapon is a live firearm; see U.S. live firearm notice in the Buyer's Guide. Estimate: $6,000 - 8,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
SCREAM - Billy Loomis' (Skeet Ulrich) Ghostface KnifeBilly Loomis' (Skeet Ulrich) Ghostface knife from Wes Craven's horror mystery Scream. Revealed to be one of the murderers during the film's climax, Loomis wielded his knife as he attempted to kill his girlfriend, Sidney Prescott (Neve Campbell).This cast rubber stunt knife features a black grip with a silver-color guard, pommel and blade. It exhibits extensive chipping and cracking of the paint throughout as well as some minor blood staining on the blade. Dimensions: 14" x 8" x 5" (35.5 cm x 20.5 cm x 12 cm) Estimate: $5,000 - 7,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
SCREAM - Ghostface's Stunt KnifeGhostface's stunt knife from Matt Bettinelli-Olpin and Tyler Gillet's horror sequel Scream. After a long hiatus, the Ghostface killer returned to terrorize the next generation of Woodsboro teenagers as well as the survivors of the first series of murders. This plastic stunt knife features a black grip with a silver-color guard, pommel and blade. It exhibits bending and some minor chipping on the pommel as well as slight bubbling and a small piece missing from the tip. Also included is a letter of authenticity from Bearded Skulls MUFX group. Dimensions: 12" x 2.5" x 1" (30.5 cm x 6.5 cm x 2.5 cm) Estimate: $4,000 - 6,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR TREK: THE NEXT GENERATION - Starfleet Operations Officer's (Marijane Cole) CostumeA Starfleet operations officer's (Marijane Cole) costume from the sci-fi drama series Star Trek: The Next Generation. In the Season 7 episode "All Good Things..," Jean-Luc Picard (Patrick Stewart) spoke to an earlier incarnation of the USS Enterprise crew, including a Starfleet operations officer.This black spandex costume features the golden yellow accents of the operations division. with a "STAR TREK TNG" tag marked for "MARYJANE COLE [sic]" on the interior collar, a front zipper closure, and elastic stirrups in each pant leg. A small fastening strip square is sewn into the chest and affixed with a gold- and silver-color resin Starfleet combadge. Also included is a replica metal detail with three removable magnetized circular pips added to complete the costume. It exhibits signs of wear from age and use including some small holes on the collar by the ranking pips. Estimate: $3,000 - 5,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR TREK: THE NEXT GENERATION - 2366 Type-2 "Cobra Head" PhaserA 2366 Type-2 phaser from the sci-fi series Star Trek: The Next Generation. Introduced during Season 3 of The Next Generation, and used in the early seasons of both Deep Space Nine and Voyager, the 2366 phaser variant featured a sharper angular design than those that came before and after it.This black and silver-color resin phaser features a grooved handle, two static white buttons, one static gray button, and a metallic blue indentation beneath its emitter. The phaser exhibits scuffs and scratches in the painted finish. Dimensions: 9" x 2" x 2" (23 cm x 5.25 cm x 5.25 cm) Estimate: $3,000 - 5,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR TREK: THE NEXT GENERATION - Klingon Bat'lethA Klingon bat'leth from the sci-fi series Star Trek: The Next Generation. Klingon warriors practiced, competed, and battled with the traditional bladed weapon of their homeworld throughout the series.This dense urethane bat'leth is painted silver-color and features a series of brown suede hand wraps on its three grips. The paint exhibits bubbling and chipping throughout, as well as some bending and cracking on one of the bladed tips. Dimensions: 48" x 6" x 38" (122 cm x 15.25 cm x 96.5 cm) Estimate: $2,000 - 3,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR TREK: DEEP SPACE NINE - Light-Up TR-116 Projectile RifleA light-up TR-116 projectile rifle from the sci-fi series Star Trek: Deep Space Nine. In the Season 7 episode "Field of Fire," Ezri Dax (Nicole de Boer) used a modified rifle and targeting computer with help from Joran (Leigh McCloskey), a previous Symbiont host, to find a killer.This gray and silver-color metal and resin rifle features a black grip and detailed barrel accents. A section with piping details can be removed from the under section of the stock.Flipping a switch on the side of the rifle activates lights on the barrel and body. It exhibits some scuffing, cracking and loosening of several of the details on the sides of the body. Dimensions: 38" x 9" x 2" (96.5 cm x 23 cm x 5 cm)Contains electronic components; see notice in the Buyer's Guide.This lot would pair well with Lot #1177 Ezri Dax's (Nicole de Boer) Light-Up Exographic Targeting Sensor. Estimate: $3,000 - 5,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR TREK: VOYAGER - Seven of Nine's (Jeri Ryan) CostumeSeven of Nine's (Jeri Ryan) costume from the sci-fi series Star Trek: Voyager. After being rescued from the Borg and having most of her mechanical implants surgically removed, Seven of Nine was given a new outfit designed by the Doctor (Robert Picardo), the ship's Emergency Medical Hologram. Seven of Nine wore the purple variant of her costume from Season 5 onward.This spandex-blend purple catsuit with silver-color specks features a rear-zipper enclosure, a fastening strip on the chest for attaching a combadge, and attached feet which would be worn over inserted shoes. It exhibits some dirt on the bottom of the foot accents. Estimate: $6,000 - 8,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR TREK: DISCOVERY - Saru's Starfleet Science CostumeSaru's Starfleet science costume from the sci-fi series Star Trek: Discovery. In the Season 1 episodes "The Vulcan Hello" and "Battle at the Binary Stars," Saru wore his costume while he served as chief science officer aboard the Shenzhou. This costume consists of a blue cotton-spandex blend jacket, science division, with silver striping, zippers, and embellishments marked "#3 Saru," as well as a matching pair of blue and silver pants marked "M28" and "#3 Saru." Also included is a CBS Certificate of Authenticity signed by Alex Kurtzman. The costume exhibits minor white stains and indents from a removed combadge on the jacket's chest. Estimate: $5,000 - 7,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR TREK: DISCOVERY - Hero Lieutenant Commander-Rank Starfleet Science BadgeA hero lieutenant commander-rank Starfleet science badge from the sci-fi series Star Trek: Discovery. Throughout Seasons 1 through 3, Starfleet lieutenant commanders in the science division, such as Airiam and Paul Stamets, wore their badges while they served aboard the U.S.S. Discovery, Shenzhou, and other vessels throughout the seasons. This silver-color delta-shaped metal badge features two pips and one hole (lieutenant commander rank), an overlapping oval symbol (science division), and a magnetic backing. Also included is a CBS Certificate of Authenticity signed by Alex Kurtzman. It exhibits some wear to the finish. Dimensions: 3" x 2" x 0.5" (7.75 cm x 5.25 cm x 1.5 cm) Estimate: $2,500 - 3,500This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR TREK: FIRST CONTACT - 2371 Type-2 "Boomerang" PhaserA 2371 Type-2 phaser from Jonathan Frakes' sci-fi film Star Trek: First Contact. The 2371 phaser variant, introduced in First Contact, featured a sleek, curvier handle than its predecessor and quickly became the Starfleet standard.This black and silver-color resin phaser features a grooved handle, two static white buttons, a pressable gray button, a green power indicator decal, and a metallic blue indentation beneath its emitter. Included is a gray wool carrying case. The phaser exhibits scuffs and scratches in the painted finish, as well as chips in the tip of the resin emitter. Dimensions: 7.5" x 2" x 2" (19.25 cm x 5.25 cm x 5.25 cm) Estimate: $3,000 - 5,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR TREK: FIRST CONTACT - Starfleet 2373 Type-3 Phaser RifleA Starfleet 2373 Type-3 phaser rifle from Jonathan Frakes' sci-fi sequel Star Trek: First Contact. While under attack by the Borg, Picard (Patrick Stewart) and Worf (Michael Dorn) led a pair of teams through the Enterprise, arming each member with a standard Starfleet-issue rifle.Made predominantly of resin and hard rubber with a metal armature, the rifle is painted silver-color and black. It features molded targeting sight on the top as well as a contoured barrel. The rifle exhibits wear, including paint chipping, scuffs and scratches throughout. Dimensions: 33" x 10" x 3" (84 cm x 25.25 cm x 7.75 cm) Estimate: $3,000 - 5,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR TREK INTO DARKNESS - Starfleet T-1 PhaserA Starfleet T-1 phaser from J. J. Abrams' sci-fi sequel Star Trek Into Darkness. The crew of the U.S.S. Enterprise, as well as other Starfleet personnel, used their phasers to defend themselves from enemies.This phaser is constructed primarily of resin, painted black and silver-color, and features a rotating emitter at the front, which alternates between the red "kill" barrel and silver-color "stun" barrel. The emitter is rotated by hand and holds in either primary position through embedded magnets. The metallic finish exhibits wear including scratches and chipping. Dimensions: 10.25" x 7" x 2" (26.25 cm x 18 cm x 5.25 cm) Estimate: $4,000 - 6,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR WARS: THE PHANTOM MENACE - Obi-Wan Kenobi's (Ewan McGregor) Lightsaber Hilt with Short BladeObi-Wan Kenobi's lightsaber hilt with a short blade from George Lucas' Star Wars: The Phantom Menace. Jedi Padawan Obi-Wan wielded his signature blue lightsaber throughout the film, including during his and Qui-Gon Jin's (Liam Neeson) duel with Darth Maul (Ray Park). This lightsaber hilt features a ridged resin and metal handgrip and a rounded pommel cap, all painted silver, black, red, and gold to simulate a metallic finish. Unlike the full-length aluminum blades, this hilt is inset with a half-length plastic lightsaber "blade" (staff) painted green in order to be digitally overlaid with VFX in shots where Kenobi swung his saber. Multiple behind-the-scenes images show McGregor wielding this style of saber.This hilt is missing a charging port or waist clip, suggesting it was built exclusively for dueling sequences. It exhibits visible scuffing, exposing resin throughout the grip and pommel, while the blade's tip is chipped from production use. Dimensions: 22" x 2" x 2" (56 cm x 5 cm x 5 cm) Estimate: $30,000 - 50,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR WARS: THE PHANTOM MENACE - Obi-Wan Kenobi's (Ewan McGregor) Dueling Lightsaber Hilt and BladeObi-Wan Kenobi's (Ewan McGregor) dueling lightsaber hilt and blade from George Lucas' Star Wars: The Phantom Menace. Jedi Padawan Obi-Wan wielded his signature blue lightsaber throughout the film, including during his and Qui-Gon Jin's (Liam Neeson) duel with Darth Maul (Ray Park). This lot consists of a lightsaber hilt with a ridged resin and metal handgrip and a rounded pommel cap inset with a threaded rod, all painted silver, black, and red to simulate a metallic finish, as well as a carbon fiber lightsaber "blade" (staff) painted green and inset with a metal rod. The hilt's threaded rod allowed for installation of aluminum blades that were used for dueling sequences and replaced frequently as they were damaged on set. The blade was designed to be affixed to a hilt for dueling sequences, then digitally overlaid with VFX to produce each lightsaber's iconic glow.This hilt is missing a charging port and exhibits visible scuffing throughout, exposing resin just below the rod, while the blade exhibits tears and damage throughout from production use, most notably on its tip. The hilt and blade are presented separately. Dimensions (hilt): 22" x 2.5" x 2 (56 cm x 6.5 cm x 5 cm); (blade): 35" x 3" x 1" (89 cm x 7.75 cm x 2.5 cm) Estimate: $30,000 - 50,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR WARS: ATTACK OF THE CLONES - Obi-Wan Kenobi's (Ewan McGregor) Dueling Lightsaber Hilt with Green BladeObi-Wan Kenobi's (Ewan McGregor) dueling lightsaber hilt with a green blade from George Lucas' Star Wars: Attack of the Clones. Jedi Master Obi-Wan wielded his signature blue lightsaber throughout the film, including during his fight with Jango Fett (Temuera Morrison) on Kamino.This lot consists of a lightsaber hilt with a ridged resin and metal handgrip and a rounded pommel cap inset with a threaded rod, all of which is painted silver, gold, black, and red to simulate a metallic finish, as well as a metal "blade" (staff) with two holes wrapped with green tape. The hilt's threaded rod allowed for installation of aluminum blades that were used for dueling sequences and replaced frequently as they were damaged on set. The blade was designed to be affixed to a hilt for dueling sequences, then digitally overlaid with VFX to produce each lightsaber's iconic glow. The smaller Allen Head set screws used to lock the blade to the hilt sit at 90 degrees around the blade's diameter, differentiating this example from those used in Star Wars: The Phantom Menace. Both the hilt and blade exhibit signs of production use and handling, including exposed resin and cracks along the grip, tears to the tape, and stains to the metal from affixing and removing the blade. Dimensions: 49.25" x 2.25" x 2.25" (125.25 cm x 5.75 cm x 5.75 cm) Estimate: $30,000 - 50,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR WARS: ATTACK OF THE CLONES - Mace Windu's (Samuel L. Jackson) Dueling Lightsaber HiltMace Windu's (Samuel L. Jackson) dueling lightsaber hilt from George Lucas' Star Wars: Attack of the Clones. Jedi Master Windu wielded his distinctive amethyst lightsaber throughout the film, including during his battle with Jango Fett (Temuera Morrison) and the Separatist Droid Army.Jackson asked Lucas for a specialized purple lightsaber so Windu could stand out, and despite some initial reluctance, Lucas agreed. This lightsaber hilt features a resin and rubber handgrip, a rounded pommel, and a black charging port. It is inset with a threaded steel rod and painted gold, silver, and black to simulate a metallic electrum finish. The threaded rod allowed for installation of aluminum blades that were used for dueling sequences and replaced frequently as they were damaged on set. The charging port is loose, and the gold finish is flaking throughout from production use and age, exposing the resin. Dimensions: 21" x 2" x 2" (53.5 cm x 5 cm x 5 cm) Estimate: $15,000 - 20,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR WARS: REVENGE OF THE SITH (2005) - Obi-Wan Kenobi's (Ewan McGregor) Rehearsal Lightsaber Hilt with Green BladeObi-Wan Kenobi's (Ewan McGregor) rehearsal lightsaber hilt with a green blade from George Lucas' Star Wars: Revenge of the Sith. Jedi Master Obi-Wan wielded his signature blue lightsaber throughout the film.This lot consists of a black and silver-color lightsaber hilt with a resin and metal handgrip and a rounded pommel cap inset with a threaded metal rod, as well as a carbon fiber "blade" (staff) painted green to be digitally overlaid with VFX to produce its iconic glow. This rehearsal lightsaber's hilt is in the style carried by Kenobi in The Phantom Menace and Attack of the Clones, as it was originally planned for Kenobi to transition to his A New Hope hilt mid-film, but it was ultimately decided to instead have Kenobi wielding his updated lightsaber from the beginning of the film. The hilt and blade exhibit nicking and scuffing throughout from production and handling. Dimensions: 49" x 1.75" x 1.75" (124.5 cm x 4.5 cm x 4.5 cm) Estimate: $6,000 - 8,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR WARS: THE PHANTOM MENACE (1999)/STAR WARS: ATTACK OF THE CLONES (2002) - Plo Koon (Matt Sloan) Dueling Lightsaber HiltA Plo Koon (Matt Sloan) dueling lightsaber hilt from George Lucas' Star Wars: The Phantom Menace and Star Wars: Attack of the Clones. Designed and built by the production's props department for background Jedi seen in The Phantom Menace, this style of hilt became specifically associated with Plo Koon, a Kel Dor Jedi Master on the Jedi High Council, in Attack of the Clones.This hilt features a resin and metal handgrip with a tapered pommel cap inset with a threaded rod. It is painted silver-color, black, and red to simulate a metallic finish. The threaded rod allowed for installation of aluminum blades that were used for dueling sequences and replaced frequently as they were damaged on set. The resin exhibits scuffs and cracks throughout from production use, with a small ridge piece broken off near the blade end. Dimensions: 14.25" x 2.75" x 2.25" (36.25 cm x 7 cm x 5.75 cm) Estimate: $12,000 - 16,000ΔThis lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR WARS: A NEW HOPE (1977) - Greg Hildebrandt-Signed Brothers Hildebrandt Poster with Three Character RemarquesA Brothers Hildebrandt poster with three character remarques from George Lucas' Star Wars: A New Hope signed by Greg Hildebrandt. Posters by artist brothers Greg and Tim Hildebrandt were used briefly for the U.K. promotion of Star Wars: A New Hope, making them fan favorites of the franchise. The Hildebrandts' art was later used for the cover of Time Magazine's "45th Anniversary: The Story of Star Wars" special edition in 2022. This original 1977 poster is signed in silver-color marker by Greg Hildebrandt with remarques of Darth Vader, Yoda, and Boba Fett. The poster exhibits minor creases from being rolled for storage. Dimensions: 20" x 28" (51 cm x 71.25 cm)Sold without copyright; see notice in Buyer's Guide. Estimate: $3,000 - 5,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STAR WARS: THE EMPIRE STRIKES BACK (1980) - N.J. Farmer Darth Vader Touring CostumeA Darth Vader touring costume created by N.J. Farmer Associates Ltd. for touring and promotional events in the U.K. circa 1980s. Lucasfilm commissioned Farmer to produce a number of high-quality Darth Vader costumes for use in public events and press appearances. Farmer had a relationship with Lucasfilm U.K. as he was previously part of Palitoy, the toy-manufacturer who created Star Wars toys and merchandise in the U.K. They first created costumes for Lucasfilm around the time of The Empire Strikes Back's release, and continued to support Lucasfilm's U.K. division with costumes and components through the release of Return of the Jedi and beyond into the later 1980s.This costume consists of a number of components, including a two-piece helmet, shoulder armor, chest control box, belt, cape and internal robe, vest, shirt, codpiece, pants, greaves, and boots. The fiberglass helmet was molded from a genuine film helmet and is painted black and gray with machined aluminum "tusks," dual-layer metal grills in the vents, a single acrylic lens piece which is screwed in place, foam padding for wearer comfort, and elastane straps. The faceplate and dome, both marked "7" in a silver color and "12," in a red color, are secured together via a two-piece ring mounting system. The fiberglass shoulder armor is painted black and gray with hinged ends. The black cotton cape features a leather-trimmed collar with a metal chain across it and a matching interior robe layer, both with N.J. Farmer Associates labels marked "769" and "770" respectively. The quilted black leather vest features a zippered and buckled back with an N.J. Farmer Associates label. The cotton shirt features quilted black leather sleeves, a tie-up back, and an N.J. Farmer Associates label. The chest control box is made of fiberglass with painted buttons and leather straps. The black leather belt features a metal buckle, a battery slot for four "D" batteries, and two metal belt boxes with embellishments including red lights and green buttons that light up when powered. Red and blue wires extend from the battery slot, while a TS cable leads out of one of the belt boxes. The codpiece is made of black leather with a felt backing. The quilted black leather pants feature boot stirrups, a fastening strip fly, and an N.J. Farmer Associates label. The greaves are made of vacuum-formed plastic with fastening-strip straps, and the tall riding-style boots are made of black leatherette. The costume dates to the 1980s with specific promotional use unknown. It originated with members of the N.J. Farmer crew and elements such as the helmet are believed to have been re-finished at some point in their life. Replica gloves were added to complete the costume. Various components some wear from use and age, including scuffing, discoloration, creasing in the leather, and one of the belt box embellishments having come unglued and fallen inside the belt box.Contains electronic components; see notice in the Buyer's Guide. Estimate: $80,000 - 120,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
BACK TO THE FUTURE PART II - Marty McFly's (Michael J. Fox) HoverboardMarty McFly's (Michael J. Fox) hoverboard from Robert Zemeckis' sci-fi film Back to the Future: Part II. McFly first obtained his hoverboard from a young girl in the year 2015 to escape from Griff Tannen (Thomas F. Wilson) and his gang, and continued to use it throughout the film and its sequel, Part III.Two primary styles of hoverboards were made for production, wood boards and lightweight foam boards. This hoverboard is constructed primarily of rigid lightweight foam, painted pink, and given a photo-print finish on the top and bottom (as opposed to the lenticular print used on some boards). The top features the word "HOVERBOARD," Mattel logos, its foot-pad and fuzzy pink foot-strap (which are frequently missing from Mattel board props), zig-zagging pink and green fastening strips, a hole in the front from where Marty would have removed the handles, and an additional smaller hole drilled into the center, likely related to mounting the board to a rig, shoe or similar during production. The bottom features plastic detailing including two silver-color hover pads; one pad was cracked and was repaired after production. The hoverboard exhibits wear from use and age including small stains and marring to the finish, as well as a repaired crack in one of the hover pads. The footpad fastening strips had also slid out of position from years in storage, and has been reset to its original location. The Marty McFly hoverboard remains the most memorable prop of the Back to the Future trilogy, and this is a scarce complete example. Dimensions: 28" x 8.5" x 2.5" (71.25 cm x 21.75 cm x 6.5 cm) Estimate: $80,000 - 120,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
BACK TO THE FUTURE PART II - Griff Tannen's (Thomas F. Wilson) "P.I.T Bull" HoverboardGriff Tannen's (Thomas F. Wilson) "P.I.T Bull" hoverboard from Robert Zemeckis' sci-fi sequel Back to the Future Part II. Griff used his rocket-powered hoverboard to pull his gang through 2015 Hill Valley and over the water as they chased Marty McFly (Michael J. Fox).Both lightweight foam and heavier wood versions were made for each of the hoverboards. This distinctive hoverboard features a custom-made wooden deck painted black with red outlines and two resin rockets painted silver screw onto a wooden bar on the bottom. Two decals, one reading "P.I.T BULL" and the other of a pitbull's face, are applied to the front in between two fastening strip footpads with a nylon foot strap and three additional straps for pulling other hoverboards also screwed on. Plastic hoverpads on the reverse are painted silver, white, and red with red "horns" screwed on at the top. This is one of the rare examples that is still complete with lower thrusters and edge-mounted greebles (non-functional) for the retractable cables used to pull the other gang members. Also noteworthy are two holes through the board's surface - likely for attaching the cables used to fly the hoverboards on special-effects rigs. The P.I.T Bull boards are scarcer than other hoverboards made for the film, such as the Mattel board.This hoverboard exhibits visible signs of production use and age, with cracks in the hoverpads, numerous small chips to the wood and paint, and stains on the footpads. Dimensions: 36" x 16" x 4.5" (91.5 cm x 40.75 cm x 11.5 cm) Estimate: $60,000 - 80,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
STARSHIP TROOPERS - Stunt Morita MK I Carbine RifleA stunt Morita MK I carbine rifle from Paul Verhoeven's sci-fi satire Starship Troopers. Federation Pilots and Mobile Infantry officers carried carbines to battle the Arachnids. This lot originated with a producer who noted that it was made for Jean Rasczak (Michael Ironside) before entering a private collection following production. However, other than the producer's attribution, it is not possible to confirm that this specific weapon was used by Rasczak.Constructed of foam rubber, this carbine is cast from a hero version of the firearm and features elaborate receiver, magazine and grip detailing. A black synthetic webbing sling is attached to the left side of the body. The body is painted olive green, with barrel and receiver components finished in black with metallic highlights. The magazine is painted faux silver to match the hero weapons. It exhibits minor signs of scuffing and discoloration throughout. Dimensions: 32" x 11" x 2" (82.25 cm x 28 cm x 5 cm) Estimate: $3,000 - 5,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
TERMINATOR 2: JUDGMENT DAY - T-1000's (Robert Patrick) Liquid Metal Police Uniform, Jacket, and HairpieceT-1000's (Robert Patrick) liquid metal police uniform, jacket, and hairpiece from James Cameron's sci-fi action sequel Terminator 2: Judgment Day. The T-1000 morphed into and out of various appearances, transitioning into a liquid metal version of itself throughout the film. All of the components in this lot are painted chrome by production to appear metallic. The lot consists of a production-made T-1000 bust mounted to a foam base and affixed with a plastic shell hairpiece; a plastic and nylon long-sleeve jacket marked "P" on the interior with matching pants; a white cotton undershirt with a silver-color collar; a pair of hand-shaped rubber gloves; a non-functional digital watch; a leather belt with four belt keepers; a leather handcuff case; a leather magazine pouch; a leather radio pouch; a leather and metal key chain belt clip; a leather and metal baton holder; and leather shoes with raised rubber heels.The foam head has had minor sympathetic restoration and sealing to cracks. The lot exhibits signs of production wear and age throughout, including scratching to the jacket and pants, paint chipping, cracked leather, and crumbling foam. Estimate: $20,000 - 30,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
TERMINATOR 2: JUDGMENT DAY - The Terminator's (Arnold Schwarzenegger) Endoskeleton Facial ApplianceThe Terminator's (Arnold Schwarzenegger) endoskeleton facial appliance from James Cameron's sci-fi action sequel Terminator 2: Judgment Day. A shootout during the escape from the Cyberdyne building left the living tissue covering the Terminator's face damaged, exposing the metal endoskeleton underneath.This lot consists of a white plaster casting of Schwarzenegger's face with a small metal loop in the back and a silver-color foam facial appliance adhered to the front, simulating an exposed portion of the Terminator's metal endoskeleton. Also included is a black plastic framed display featuring the film's title logo, an image from the film, and two behind-the-scenes- images. The facial appliance exhibits some cracking, paint wear, and red staining throughout from the application of stage blood; the frame exhibits some wear from handling. Dimensions: (casting with appliance) 11.5" x 6" x 5" (29.25 cm x 15.25 cm x 12.75 cm); (frame) 8" x 10" x 0.5" (20.5 cm x 25.5 cm x 1.5 cm) Estimate: $4,000 - 6,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
TERMINATOR 2: JUDGMENT DAY - The Terminator's (Arnold Schwarzenegger) Battle-Damaged Chest ApplianceThe Terminator's (Arnold Schwarzenegger) battle-damaged chest appliance from James Cameron's sci-fi action sequel Terminator 2: Judgment Day. The T-800 sustained significant damage during the attack on Cyberdyne and when he confronted the T-1000 (Robert Patrick) at the steel mill.This appliance was designed, sculpted, and hand-painted to be worn under a shirt to simulate damaged and bloodied skin with exposed portions of metal endoskeleton. It features charred and bloodied foam latex skin, a dense urethane endoskeleton painted silver-color, and black nylon and elastic straps with a fastening strip closure. Following production, this appliance underwent sympathetic restoration to seal and reattach broken foam latex. It still exhibits significant cracking, stiffness, and stains on the straps from production use and age. Dimensions: 14.5" x 12" x 3" (37 cm x 30.5 cm x 7.75 cm) Estimate: $3,000 - 5,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
TERMINATOR 2: JUDGMENT DAY - T-1000's (Robert Patrick) Bullet-hit Zip-up LAPD ShirtT-1000's (Robert Patrick) bullet-ridden zip-up LAPD shirt from James Cameron's sci-fi action sequel Terminator 2: Judgment Day. The T-1000 wore its shirt during the asylum sequence as it fastened itself to the back of a police car containing The Terminator (Arnold Schwarzenegger), Sarah Connor (Linda Hamilton) and her son John (Edward Furlong). The Terminator and Sarah both shot it with their shotgun and pistol respectively, punching holes in the T-1000's liquid-metal body.This navy polyester-blend zip-up shirt with decorative buttons is based on a police uniform. It features 15 silver-color foam-latex bullet holes on the front and three on the back. It exhibits paint wear and signs of deterioration on the foam latex bullet marks. Estimate: $8,000 - 12,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
TERMINATOR 2: JUDGMENT DAY - Robert Patrick-Autographed T-1000 Picture and Hook DisplayA displayed Robert Patrick-autographed T-1000 picture and hook from James Cameron's sci-fi action sequel Terminator 2: Judgment Day. The T-1000 used his hooks to latch onto the car containing the Connors, only to be shot off by the Terminator (Arnold Schwarzenegger).This lot consists of a metallized resin hook with a chrome-like finish, an autographed black-and-white photograph of Robert Patrick as the T-1000, and an information plaque with the film's title logo mounted inside of a black and silver-color wood and glass frame with a black mat. The hook is permanently affixed to the frame and is not removable. Both the hook and frame exhibit paint chipping. Dimensions: 33" x 17" x 3" (84 cm x 43.25 cm x 7.75 cm) Estimate: $4,000 - 6,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
TERMINATOR 3: RISE OF THE MACHINES - Screen-Matched Full-Size Terminator (Arnold Schwarzenegger) T-850 Series Model 101 PuppetA screen-matched, full-size Terminator (Arnold Schwarzenegger) T-850 Series model 101 puppet from Jonathan Mostow's sci-fi action sequel Terminator 3: Rise of the Machines. The highly-damaged Terminator threw himself under a closing bomb door to allow John Connor (Nick Stahl) and Kate Brewster (Claire Danes) to get to safety. Details on this puppet's belt screen-match it to shots in the sequence where the Terminator stopped the TX (Kristanna Loken) from crawling under the door by shoving his last fuel cell into her mouth and destroying them both in the explosion. The teeth pattern on the jacket also matches it to shots of the same scene featured in the blooper reel.Created by Stan Winston, this full-size puppet was created for shots of the damaged Terminator and appeared multiple times throughout "The Making of Terminator 3: Rise of the Machines" and "Terminator 3: The Deterioration of the T-850 aka Arnold Schwarzenegger."This full-size puppet consists of a silver-colored metal, resin, and rubber endoskeleton affixed in several areas with silicone skin and bloody flesh accents. The outermost layer of the statue features extensively damaged sections of the Terminator's signature wardrobe, including a black leather jacket; a cotton shirt, a black leather glove; black leather pants; a black leather belt and a black leather boot. The fully-detailed silicone head features synthetic hair and a replica face added to complete the lot with a large section of exposed endoskeleton.The head and torso are packed in the interior with extensive untested cable-controlled mechanisms which are exposed on the back as well as a metal rod which sets it on a black wooden base. It exhibits signs of wear from age and use on the silicone elements. Dimensions: 30" x 28" x 72" (76.25 cm x 71.25 cm x 183 cm)Contains electronics; see notice in the Buyer's Guide.Special shipping required; see notice in the Buyer's Guide. Estimate: $40,000 - 60,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
WARCRAFT - King Llane's (Dominic Cooper) Urethane Sword and ScabbardKing Llane's (Dominic Cooper) urethane sword and scabbard from Legendary Pictures' fantasy epic Warcraft. The King of Stormwind wielded his signature sword during the final battle between the humans and Orcs.This lot consists of an ornate urethane broadsword etched with runes and painted silver and gold with a blue woven grip, a spiked gold-color pommel, and a Stormwind lion emblem molded onto the handle, as well as a metal-studded leather scabbard etched with a matching emblem and painted silver and gold. Both are aged by production to appear battle-worn, with fraying leather and discoloration to the blade. Dimensions (sheathed): 49" x 9" x 5" (124.5 cm x 23 cm x 12.75 cm) Estimate: $7,000 - 10,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
ADDAMS FAMILY, THE - Hand-Drawn Storyboard Folder, Printed Storyboards, Promotional Photos and Joke ChairbackHand-drawn storyboard folder, printed storyboards, promotional photos and joke chairback from Barry Sonnenfeld's gothic comedies The Addams Family and Addams Family Values. This lot consists of a custom-made black and silver-color folder containing 10 hand-drawn storyboards in mixed media; 150+ brass-bound printed storyboards; a navy canvas chairback with "THE ADDAMS FAMILY" on one side and director "JOHN BADHAM," who declined a directorship offer, on the other; and 10 glossy black-and-white promotional photographs from the promotion of Addams Family Values. It exhibits creasing on the storyboards. Dimensions: 11.5" x 8.5" x 1.25" (29.25 cm x 21.75 cm x 3.25 cm)Sold without copyright; see notice in the Buyers Guide. Estimate: $600 - 800This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
AVP: ALIEN VS. PREDATOR - Scar's (Ian Whyte) Predator Bio-Helmet Scar's (Ian Whyte) Predator bio-helmet from Paul W. S. Anderson's sci-fi action film AVP: Alien vs. Predator. Scar wore his Yautja bio-helmet during the Predators' millennium-long hunt of alien xenomorphs in the Antarctic pyramid.This fiberglass casting with a grid-line-patterned acrylic visor and technological details, including a non-functioning tri-laser, sculpted into the sides was created for the production by Academy Award®-winning special effects group Amalgamated Dynamics, Inc. (ADI). Following production, it was hand-painted silver and affixed with fastening strips at the forehead and chin for display purposes. The paint is flaking throughout, exposing the fiberglass, and the visor is smeared with sticky residue. Dimensions: 17" x 12" x 7.5" (43.25 cm x 30.5 cm x 19.25) Estimate: $3,000 - 5,000This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
BACK TO THE FUTURE PART II - Futuristic SunglassesFuturistic sunglasses from Robert Zemeckis' sci-fi sequel Back to the Future Part II. Marty McFly (Michael J. Fox) journeyed to the year 2015, where he found a futuristic version of Hill Valley filled with people wearing the strange fashions of tomorrow.This lot consists of a pair of brown plastic shield sunglasses with cuts made around the edges to fit a production-made plastic cover painted blue, purple, red, and silver-color with bold shapes around each eye, silver-color studs, a triangular eye hole, and a trapezoidal eye hole. The glasses exhibit scratching and cracking, while the cover exhibits scuffing, paint chipping, two missing studs, and broken clips on the back. Dimensions (cover): 7" x 3" x 1.5" (18 cm x 7.75 cm x 4 cm) Estimate: $1,000 - 1,500This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
BATMAN - Batman's (Michael Keaton) SpeargunBatman's (Michael Keaton) speargun from Tim Burton's superhero sequel Batman Returns. Batman used his speargun, also known as the spring-action reel or the grapple gun, as a key gadget during his battle with members of Penguin's (Danny DeVito) gang on the streets of Gotham. The speargun that appeared in Batman Returns was a design carried over from the original Batman (1989) film. Multiple variations of the speargun were conceived around the idea that different accessories could attach to the spring-action reel which also contained a firing mechanism. Those accessories included the spearhook that was the main attachment, smoke capsules, bolas, and tranquilizers, and were designed by concept designer Julian Caldow for the first film. After that film's success, the speargun was widely seen in images of Batman and became one of the character's most iconic gadgets. New props were built for Batman Returns that were modeled exactly on those for the first film, though slightly different in construction. The first film props were capable of interchanging the front accessories, while the props for Returns were made as with the speargun attachment integral to the back spring-action reel section.This speargun includes a practical folding handle that locks into place via a spring-loaded retention mechanism, and is constructed primarily from resin hand-painted in Batman's signature black with metalized silver-color panels screwed in on each side. A length of gray cord is wrapped around a spring-coiled practical spindle; when the rope is pulled out of the prop, the spring-mechanism functions to return it to the coil. The speargun is the signature accessory of Michael Keaton's Batman and original props are exceedingly rare; this is one of only two spearguns from either Batman or Batman Returns still known to exist. This lot exhibits signs of production use and age throughout, including fraying to the rope's end, paint scratching exposing unpainted resin underneath, and loosening to the screw-on handgrip. Dimensions: 9" x 5" x 3" (23 cm x 12.75 cm x 7.75 cm)Contains mechanical components; see notice in the Buyer's Guide. Estimate: $100,000 - 150,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
BATMAN FOREVER - Two-Face's (Tommy Lee Jones) CoinTwo-Face's (Tommy Lee Jones) coin from Joel Schumacher's superhero sequel Batman Forever. Two-Face flipped his signature coin to let fate make decisions for him, which ultimately led to his downfall when Batman (Val Kilmer) tossed too many coins into the air for him to count which resulted in a fall to the death.This silver-color metal coin is engraved "E Gothamus Unum" with the face of Lady Gotham, Gotham City's version of the Statue of Liberty, on both sides. One side is normal, while the other is intentionally gouged throughout by production. Also included is a Warner Bros. Studio Store Certificate of Authenticity. The coin exhibits some brown staining from production use. Dimensions: 2" x 2" x 0.5" (5 cm x 5 cm x 1.5 cm) Estimate: $2,500 - 3,500This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
BATMAN FOREVER - Two-Face's (Tommy Lee Jones) Oversized CoinTwo-Face's (Tommy Lee Jones) oversized coin from Joel Schumacher's superhero sequel Batman Forever. Two-Face flipped his coin to let fate make his decisions for him, and was ultimately defeated when Batman (Val Kilmer) tossed a handful of coins into the air while Two-Face was flipping his own, which overwhelmed Two-Face and caused him to fall to his death. Oversized coins were used in close-up shots.This silver-color metal coin features Lady Gotham (Gotham City's version of the Statue of Liberty) and "E Gothamus Unum" on both sides, with one side covered in deep scratches. Dimensions: 3" x 3" x 0.25" (7.75 cm x 7.75 cm x 0.75 cm) Estimate: $2,000 - 3,000This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
BATMAN FOREVER - Batman's (Val Kilmer) Metal Sonar Batarang ReplicaBatman's (Val Kilmer) metal sonar Batarang replica from Joel Schumacher's superhero sequel Batman Forever. Batman used the sonar-capable version of his signature weapon in a final confrontation with The Riddler (Jim Carrey).This static silver-color metal batarang is a reproduction fabricated by the same prop house that created the batarang from the film. It is equipped with a pair of curved blades on each side and an oval accent in the center with a button-like detail. Also included is a Letter of Authenticity signed by Kilmer. It exhibits minor scuffing of the metal throughout. Dimensions: 12" x 8" x 1.5" (30.5 cm x 2.5 cm x 4 cm) Estimate: $700 - 900This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
BATMAN RETURNS - Batman's Stunt Super-BatarangBatman's stunt Super-Batarang from Tim Burton's superhero sequel Batman Returns. Batman (Michael Keaton) programmed his Super-Batarang to knock out members of the Red Triangle Gang before The Poodle Lady's (Anna Katarina) poodle caught it.The Super-Batarang was designed by illustrator Tim Flattery. This rubber stunt version is hand-painted black with a red spot designed to resemble a button and Batman's signature ridging molded on the extended wings. A white resin panel applied with a silver-color decal simulating a computer screen is affixed above the button. The Super-Batarang exhibits some scuffing to the panel, bending to the left wing, and bubbling on the reverse from production use and age. Dimensions: 14" x 4.5" x 1" (35.75 cm x 11.5 cm x 2.5 cm) Estimate: $8,000 - 12,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
BREAKING BAD - Set of Wayfarer Flight 515 EvidenceWayfarer 515 evidence from Vince Gilligan's crime thriller series Breaking Bad. In the Season 2 finale "ABQ," evidence was collected from the Wayfarer flight 515 crash caused by Walter White (Bryan Cranston).This set consists of a pair of silver-color wire-rimmed glasses with faux tortoiseshell frames and a smashed lens, a plastic doll dressed in a pink elephant dress, and a brown sneaker. Each exhibits distressing by production to appear burned, charred, or damaged and comes in a plastic bag, two of which are labeled "Personal Property Inventory." Dimensions (each): 10" x 10" x 4" (25.5 cm x 25.5 cm x 10.25 cm) Estimate: $1,000 - 1,500This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
BATMAN FOREVER - The Riddler's (Jim Carrey) CostumeThe Riddler's (Jim Carrey) costume from Joel Schumacher's superhero sequel Batman Forever. The Riddler wore his attire when he entered Two-Face's (Tommy Lee Jones) hideout and formed an alliance with him to take down the Batman (Val Kilmer). He also donned the costume when the villainous pair raided a jewelry store.Custom-made for the production, and inspired by designs both from Dick Sprang's original comic-book incarnation and the live-action TV show, the costume consists of a green bowler hat; a vibrant green woolen jacket; and a lime green velour unitard. The hat has a ribbon band and question mark emblem on the front, and is marked "1" internally in silver-color writing. The jacket is decorated with scattered black felt question mark symbols and features a mandarin collar. Three welt pockets adorn the front of the jacket along with eight concealed buttons, with a black exposed button at its bottom. The lime green, long-sleeve unitard is covered in matching black question mark symbols and is marked "JIM CAREY (sic) N.3 EXTRA SMALL SUIT" on the collar. It features two zips on either side of the neck and thumb holes at the hands. A pair of green suede and black leatherette shoes with western-style metal buckles complete the costume. It exhibits signs of wear, including some staining throughout the unitard. Estimate: $20,000 - 30,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
BREAKING BAD - Framed Saul Goodman (Bob Odenkirk) Burner PhoneA framed Saul Goodman (Bob Odenkirk) burner phone from Vince Gilligan's crime thriller series Breaking Bad. Saul, Walter White (Bryan Cranston) and Jesse Pinkman's (Aaron Paul) corrupt lawyer, kept many burner phones in his office throughout the series.This nonfunctional black and silver-color Verizon flip phone with its branding scratched off by production comes backed with a color still of Saul and mounted behind glass in a black wood frame. Also included is a Sony Certificate of Authenticity. The phone's top exhibits splitting from production. Dimensions (framed): 9.5" x 13" x 1" (24.25 cm x 33 cm x 2.5 cm)Contains electronic components; see notice in the Buyer's Guide. Estimate: $800 - 1,200This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
BUCK ROGERS IN THE 25TH CENTURY - Twiki (Mel Blanc) and Dr. Theopolis (Eric Server) Life-Size ReplicaTwiki (Mel Blanc) and Dr. Theopolis (Eric Server) life-size replica from Glen A. Larson's sci-fi adventure series Buck Rogers in the 25th Century. TTwiki wore fellow robot Dr. Theopolis around his neck.This silver-color urethane and resin replica features stainless steel details and comes on a circular stand numbered "007." Included is a Dr. Theopolis replica consisting of a mint green plastic housing containing metal, plastic, and resin facial features. A rear switch activates dialogue sequences and lighting effects on Dr. Theopolis. It exhibits signs of wear and use throughout. Dimensions: 47" x 27" x 13" (119.5 cm x 68.75 cm x 33 cm)Contains electronic components; see notice in the Buyer's Guide. Estimate: $2,000 - 3,000This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
CLASH OF THE TITANS (2010) - Ixas' (Hans Matheson) ShieldIxas' (Hans Matheson) shield from Louis Leterrier's fantasy-adventure remake Clash of the Titans. A skilled soldier and archer, Ixas wielded his shield as he joined Perseus (Sam Worthington) on his quest to prevent the awakening of the Kraken.This hand-painted, light beige, crescent-shaped plywood and fiberglass shield features a silver-color rubber embossed accent on the front with a leather handling strap on the back. It exhibits distress by production to appear battle-worn with scratches and discoloration throughout. Dimensions: 35" x 24" x 0.5" (89 cm x 61 cm x 1.25 cm) Estimate: $700 - 900This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
CLEOPATRA - Roman Infantry and Cavalry ShieldsRoman infantry and cavalry shields from Joseph L. Mankiewicz's classic epic Cleopatra. Julius Caesar's (Rex Harrison) infantry carried rectangular shields, and round cavalry shields hung in the Palace of Alexandria.This lot consists of two fiberglass shields designed by prop master Zoyd Luce: a rectangular one painted silver and brass with the winged Roman crest on front and arm tabs on back; and a round one painted red and brown to appear wooden with a resin winged Roman crest and burlap straps bolted on. Both exhibit chipped fiberglass and significant discoloration with the paint browned and grimy from age and production use. Dimensions (infantry): 41" x 22" x 0.25" (104.25 cm x 56 cm x 0.5 cm); (cavalry): 29.5" x 22.5" x 0.25" (75 cm x 57.25 cm x 0.75 cm) Estimate: $400 - 600This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
CONAN THE BARBARIAN - Cult of Set AmuletA Cult of Set amulet from John Milius' fantasy adventure Conan the Barbarian. High Priests of Thulsa Doom's (James Earl Jones) Snake Cult, including the one whose robes Conan (Arnold Schwarzenegger) stole, wore two-headed amulets symbolic of their ranks. This metallic amulet is painted silver and ornately molded with a crescent moon emblem, an "all-seeing eye," and snake heads on each side. It comes with a black cord necklace. The amulet exhibits flaking paint, most visibly on the reverse, and the cord is fraying from production wear and age. Dimensions: 4.5" x 5" x 0.5" (11.5 cm x 12.75 cm x 1.5 cm) Estimate: $3,000 - 5,000This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
CSI: CRIME SCENE INVESTIGATION - David Phillips' (David Berman) Vest and Field KitDavid Phillips' (David Berman) vest and field kit from the procedural crime drama CSI: Crime Scene Investigation. Assistant Coroner Philips brought his vest and field kit to crime scenes.This lot includes a black nylon-polyester puffer vest embroidered with "Phillips" and "Coroner"; a silver-color metal case labeled "CSI - David Phillips Crime Scene Case" and "David Phillips" tag; swabs, a magnifying glass, a thermometer, rulers, fingerprinting tools, a bloodied report; and sides from the Season 15 episode "The Book of Shadows." Some elements exhibit signs of use and age. Dimensions (kit): 18.5" x 15" x 5" (47 cm x 38.25 cm x 12.75 cm)Contains electronic components; see notice in the Buyer's Guide. Estimate: $800 - 1,200This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
BLADE - Blade's (Wesley Snipes) SFX Daywalker SwordBlade's (Wesley Snipes) SFX Daywalker sword from Stephen Norrington's action horror Blade. The half-human, half-vampire wielded his signature sword in multiple scenes throughout the film, including when he battled Deacon Frost (Stephen Dorff).This version of the Daywalker was created for SFX inserts of its grip piercing the hands of anyone besides Blade who held it. The sword features a polished steel blade inset into a ribbed, machined aluminum grip engraved with vampiric glyphs and inset with four concealed, spring-loaded small blades. There is a mechanism within the handle where a pin at the handle's base is depressed to make the handle's inset blades retract. The mechanism retains some functionality, but does not work perfectly. A blue plastic fishing line is also wrapped around the blades and may have been used as part of the gag in the film. The grip has a rotating neck collar, as seen in the film, though this has no functionality. The grip is finished in black and silver-color paint. This sword exhibits some scuffing to its finish, a loose screw in the pommel, and a loose ridge around the hilt from production use and age. Dimensions: 35.5" x 5" x 2.5" (90.25 cm x 12.75 cm x 6.5 cm)Contains mechanical components; see notice in the Buyer's Guide. Estimate: $20,000 - 30,000This lot will be auctioned on Tuesday, June 21st. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Wednesday, June 22nd; Thursday, June 23rd; or Friday, June 24th.
ELVIRA: MISTRESS OF THE DARK - Doug Beswick Collection: Vincent Talbot's (William Morgan Sheppard) Bloodied Arm StumpVincent Talbot's (William Morgan Sheppard) bloodied arm stump from James Signorelli's comedy horror film Elvira: Mistress of the Dark. A falling axe severed Talbot's hand as he choked Elvira (Cassandra Peterson) through a wall.This lot comes from the collection of Doug Beswick, an effects artist well-known for his stop-motion animation and creature effects work. The stump is made of fiberglass, sculpted and painted to resemble an arm, with a rubber end piece depicting the open wound. The other end features white cotton straps and a bit of silver duct tape around the edges. Red stage blood has been applied throughout. The stump exhibits paint chipping, staining, and a crack along the length of the fiberglass arm. Dimensions: 9" x 4" x 4" (23 cm x 10.25 cm x 10.25 cm) Estimate: $400 - 600This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
EQUALIZER, THE (2014) - Robert McCall's (Denzel Washington) Book, Stunt Book and Diner SetRobert McCall's (Denzel Washington) book, stunt book and diner set from Antoine Fuqua's action drama The Equalizer. After being targeted by the Russian mob, former commando McCall used a variety of objects to defend himself in his favorite diner. This lot consists of a black bound book; a black and silver-color rubber and plastic stunt book; a black and silver-color metal spoon; a glazed ceramic mug; a pair of teabags and a light yellow napkin. It exhibits glue applied to several of the interior pages and staining in the mug interior. Dimensions: 12.5" x 6" x 3.5" (31.75 cm x 15.25 cm x 9 cm) Estimate: $400 - 600This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
EQUALIZER, THE (2014) - Russian Restaurant Fight Scene PropsRussian restaurant fight scene props from Antoine Fuqua's action drama The Equalizer. Former commando Robert McCall (Denzel Washington) used a variety of items in the back office to murder a group of Russian mafia thugs as he attempted to free Alina (Chloe Grace Moretz).This lot consists of a glass vodka bottle; a rubber stunt shot glass with a gold-color rim; a glass shot glass with a gold-color metal rim; a brown and silver-color resin corkscrew handle; and a wood and gold-color metal knife handle. It exhibits wear and cracking on the stunt shot glass. Dimensions: 11.5" x 6" x 3" (29.25 cm x 15.25 cm x 7.75 cm) Estimate: $400 - 600This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
EQUALIZER, THE (2014) - Robert McCall's (Denzel Washington) V.S.N. Stunt Book and Diner SetRobert McCall's (Denzel Washington) V.S.N. stunt book and diner set from Antoine Fuqua's action drama The Equalizer. After being targeted by the Russian mob, former commando McCall used a variety of objects to defend himself in his favorite diner. This lot consists of a black bound rubber stunt book; a black and silver-color metal spoon; a glazed ceramic mug; and a light yellow napkin. It exhibits scuffing, wear and paint chipping on the book. Dimensions: 12.5" x 6" x 3.5" (31.75 cm x 15.25 cm x 9 cm) Estimate: $400 - 600This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
EQUALIZER, THE (2014) - Russian Restaurant Fight Scene PropsRussian restaurant fight scene props from Antoine Fuqua's action drama The Equalizer. Former commando Robert McCall (Denzel Washington) used a variety of items in the back office to murder a group of Russian mafia thugs as he attempted to free Alina (Chloe Grace Moretz).This lot consists of a glass vodka bottle; two rubber stunt shot glasses with gold-color rims; a brown and silver-color resin corkscrew handle; and a wood and hard rubber gold-color metal knife handle. It exhibits wear and cracking on the stunt shot glass. Dimensions: 11.5" x 6" x 3" (29.25 cm x 15.25 cm x 7.75 cm) Estimate: $400 - 600This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
EVENT HORIZON - Pair of Co2 ScrubbersTwo Co2 scrubbers from Paul W.S. Anderson's sci-fi horror thriller Event Horizon. Oxygen scrubbers were used on board the Event Horizon and the rescue vessel Lewis and Clark to remove harmful buildups of Co2 from the atmosphere. These two matching black and silver-color cylindrical aluminum canisters feature plastic accents and multiple directional label stickers affixed. They come in translucent white plastic tubes affixed with labels reading "Co2 Air Filter" and "U.S.A.C." The pair exhibits scuffing and visible wear on the labels from production use. Dimensions: 39" x 3.5" x 3.5" (99 cm x 9 cm x 9 cm) Estimate: $800 - 1,200This lot will be auctioned on Wednesday, June 22nd. The auction will begin at 8:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Tuesday, June 21st; Thursday, June 23rd; or Friday, June 24th.
Loading...-
2466194 item(s)/page