Anmelden
Registrieren
notifications_none notifications Suchaufträge

534325 Preisdatenbank Los(e) gefunden, die Ihrer Suche entsprechen

Verfeinern Sie Ihre Suche

Jahr

Sortieren nach Preisklasse
  • Liste
  • Galerie
  • 534325 Los(e)
    /Seite

Prop Store
Los 611

A shooting script from the production of Edgar Wright's horror comedy Shaun of the Dead. Bound with a metal clip, the front cover features a black-and-white illustration of Shaun (Simon Pegg), Ed (Nick Frost) and Liz (Kate Ashfield) wielding weapons, with "SOTD, Shooting Draft, 29/04/03" written in black marker along the spine. Credited to Edgar Wright and Simon Pegg, this script comprises 124 unannotated pages, printed single-sided on white A4 paper. Signs of production use are present, including light edge wear, and the back page displays a minor crease line and corrosion marks near the clip. Dimensions: 30 cm x 21.5 cm x 2 cm (11 3/4" x 8 1/2" x 3/4")Estimate: £400 - 600 †Δ

Mehr Details

Prop Store
Los 612

Two production-used clapperboards from Guy Ritchie's detective adventure Sherlock Holmes and its sequel Sherlock Holmes: A Game of Shadows. Used by the 'A' camera unit during filming, both clapperboards consist of an acrylic slate with a wooden clapper fixed to the top. The production titles "Sherlock Holmes" and "Sherlock Holmes II" are engraved in black along the top, and the names of director Guy Ritchie and Director of Photography Philippe Rousselot feature on both. The clapperboards display fields titled "Slate", "Take" and "Roll", which are filled in with black ink. The "Sherlock Holmes" board is dated "3rd December 2008" and the "Sherlock Holmes II" board is dated "4-2-2011". Minor wear from production use is present on both boards, including light scuffing to the paint on the clapper arms and light surface scratches to the acrylic. Dimensions (each clapperboard): 4 cm x 28 cm x 24 cm (1 1/2" x 11" x 9 1/2")Estimate: £1,000 - 1,500 M

Mehr Details

Prop Store
Los 617

Sir Christopher Lee's personal filming script autographed by the cast from the production of Tim Burton's fantasy horror Sleepy Hollow. This lot comes from the personal collection of legendary actor Sir Christopher Lee. The white card cover bears the production title and features personalised inscriptions in black ink, dedicated to Christopher, from Johnny Depp and Tim Burton. The story is credited to Washington Irvin, with screenplay credit given to Kevin Yagher and Andrew Kevin Walker. Bound by a metal script clip, the document comprises 106 pages printed single-sided on white A4 paper, with additional pink and blue revision pages. The lines for Lee's character, The Burgomaster, are highlighted in yellow, and there are annotations in pencil present on the back. The script shows signs of production use, including light edge wear to some pages, marks and light creasing, and a small tear is present along the top edge of the card cover. Dimensions: 30 cm x 21 cm x 1.5 cm (11 3/4" x 8 1/4" x 1/2")Estimate: £1,500 - 2,500 M

Mehr Details

Prop Store
Los 625

Jack Traven's (Keanu Reeves) costume from Jan de Bont's 1994 action film Speed. Jack wore his costume for most of the film as he tried to save the passengers of a bus rigged with a bomb. The costume consists of a jacket, shirt, T-shirt, trousers and boots. The Quiksilver jacket (size "L") features a blue-and-brown plaid pattern and has two chest pockets; the Banana Republic shirt (size "M") is a blue cotton button-up; the T-shirt (size "L") is a white Calvin Klein; the AGOLDE jeans (size "31") are light brown; and the boots are brown leather Vasques.The costume has some wear from production use and age. The jacket has faded over time, the shirt has some minor staining and several small holes on the front, the jeans have some brown staining around the shins, and the boots show wear to the heel and soles, with dried dirt on the soles.Estimate: £3,000 - 5,000 M

Mehr Details

Prop Store
Los 633

A light-up Bajoran tricorder from classic sci-fi TV show Star Trek: Deep Space Nine. Tricorders were used by different races across the galaxy to gather sensor readings, and record and analyse data. Major Kira Nerys (Nana Visitor) used a tricorder in the Season 4 episode "Indiscretion", in which she searched for the missing crew of a downed Cardassian freighter.The Tricorder is hollow, cast from resin and finished predominantly in bronze, gold and black paint, consistent with the Bajoran aesthetic. Small red-and-green pieces of acrylic have been added for detailing, to give the appearance of buttons. When the black button is pressed, the display screen illuminates and the red-and-green acrylic pieces flash. The device has some wear from production use and age, including scuffs and scratches. There are small areas where paint has chipped away, revealing the resin underneath. Dimensions: 15 cm x 8 cm x 5 cm (6" x 3" x 2")Estimate: £800 - 1,200 M

Mehr Details

Prop Store
Los 643

Mobar's (Gregg Daniel) "talisman" scanner from the sci-fi television show Star Trek: Voyager. Mobar used his scanner, which he claimed was a religious talisman, to download information about Voyager as part of a con in the Season 6 episode "Live Fast and Prosper". The scanner is made predominantly of resin and features a long metal chain so it can be worn as a necklace. It has three buttons, two on the front and one on the side. The front buttons activate lights at the bottom and beneath the graphic in the middle of the scanner, while the side button activates a pulsing green light at the top. The scanner is powered by four AAA batteries. There is some wear from production use, including scuffing and scratches, most notably on the back. The metal chain is missing a link and is no longer complete. Dimensions (chain extended): 97 cm x 9 cm x 4 cm (38 1/4" x 3 1/2" x 1 1/2") Contains electronics; see electronics notice in the Buyer's Guide.Estimate: £800 - 1,200 M

Mehr Details

Prop Store
Los 644

A light-up Lokirrim scanner from the sci-fi television series Star Trek: Voyager. The Lokirrim used their scanners in the Season 7 episode "Body and Soul" after they took Ensign Kim (Garrett Wang), the Doctor (Robert Picardo) and Seven of Nine (Jeri Ryan) captive. Lt. Jaryn (Megan Gallagher) scanned the Doctor to confirm he is a hologram. The scanner is made of plastic and painted to look like bronzed metal. A small black button on the right of the scanner can be pressed to activate green lights around the edge and illuminate the centre screen with flashing lights. Solid black buttons are present on the front for added detail. The scanner is intentionally distressed to look worn, and displays some wear from production use and age, including some scuffing and scratches. Dimensions: 12.5 cm x 8 cm x 3 cm (5" x 3 1/4" x 1 1/4")Contains electronics; see electronics notice in the Buyer's Guide.Estimate: £1,000 - 1,500 M

Mehr Details

Prop Store
Los 652

A screen-matched, light-up, battle-damaged USS Enterprise hull insert section model miniature display from Nicholas Meyer's Star Trek II: The Wrath of Khan, its immediate sequel, Star Trek III: The Search for Spock, and Star Trek VI: The Undiscovered Country. After taking control of the USS Reliant, Khan Noonien Singh (Ricardo Montalban) opened fire on the Enterprise's secondary hull, severely crippling the ship.While models of the Enterprise from the production of Star Trek: The Motion Picture were used throughout filming, this ornately detailed, hand-painted model miniature was constructed by Industrial Light & Magic (ILM) to appear specifically battle-damaged during the attack sequence in The Wrath of Khan. It was then reused for insert shots of the ship in both The Search for Spock and The Undiscovered Country. The battle-damaged section screen-matches to shots in the third film, while its many lights screen-match to shots in the sixth.This electronic display consists of the hull section model miniature and two plastic-paneled wood wing pieces with miniature illuminating spotlights all mounted to a particle board base marked "These bulbs are 3 1/2 volts max!" designed to control small lights installed throughout the model. The electronic base features two Starfleet emblems and five switches labeled "Main", "Interior Lights", "Exterior Lights", "Arm Photon", and "Fire Torpedo" which activate various illuminating sections of the hull. The model itself is constructed of resin, wood, paper, and paneled plastic with internal steel and aluminum components, some of which are exposed around the battle-damaged area. It is painted grey and blue with red, blue, white, black, and yellow decals applied throughout, and lined with lights. The lot exhibits clear signs of use and handling, including scuffed and discoloured paint, loose paneling, and scratched wood, but it remains in excellent overall condition. Dimensions: 139.75 cm x 147.5 cm x 76.25 cm (55" x 58" x 30") Contains electronics; see electronics notice in the Buyer's Guide.Special shipping required; see notice in the Buyer's Guide.Estimate: £15,000 - 20,000 Ω

Mehr Details

Prop Store
Los 665

A copy of Star Wars: The Visual Dictionary autographed by three main cast members of George Lucas' Star Wars prequel trilogy. Written by David West Reynolds, the hardcover book contains 64 pages featuring annotated colour images and comprehensive insights into the characters, weapons and vehicles of the original trilogy. The first two pages of the book are autographed in black marker by Samuel L. Jackson, Ewan McGregor and director George Lucas. All three autographs have written messages dedicated to property master Ty Teiger. The dust jacket displays light edge wear and minor marks, and a notable rip is present on the back. Dimensions: 31.5 cm x 26.5 cm x 1.5 cm (12 1/2" x 10 1/2" x 1/2")Estimate: £400 - 600 †Δ

Mehr Details

Prop Store
Los 666

A collection of autographed promotional stills and screening tickets from the production and promotion of the Star Wars prequel trilogy. The five stills feature George Lucas, Ewan McGregor, Hayden Christensen, Natalie Portman and producer Rick McCallum, each of whom has autographed their photo in either black or gold-coloured marker. The lot also includes eight tickets for various screenings of The Phantom Menace, Attack of the Clones and Revenge of the Sith, all featuring the locations, dates and times for each event. Completing the lot is a Revenge of the Sith wrap party invitation and a black tag featuring the name of the production's prop master. The photographs exhibit light surface scratches and the tickets display minor edge wear. Dimensions (larger photographs): 30 cm x 20.5 cm (11 3/4" x 8"); (largest ticket): 19 cm x 12.5 cm (7 1/2" x 5"); (invitation): 26.5 cm x 21 cm (10 1/2" x 8 1/4")Estimate: £400 - 600 †Δ

Mehr Details

Prop Store
Los 669

A set of three ILM propaganda posters from the production of George Lucas' Star Wars: The Phantom Menace. Posters made in homage to the propaganda posters used by the United States during World War II were placed around sets and production offices to discourage crew members from accidentally leaking information about the film.Designed by Industrial Light & Magic (ILM) artist Mark Malabuyo, these three posters are colour-printed on semi-gloss poster paper with three distinctive designs: "SHHHH! The Empire is Listening!" with images of Darth Vader (David Prowse) and Snow Troopers; "Loose Lips Sink Starships!" with an image of the Millenium Falcon; and "The Empire is Watching!" with an image of the Emperor (Ian McDiarmid) and one of his personal guards. The posters are in excellent overall condition with minimal wear from use and age. Dimensions (each): 49 cm x 38.25 cm x 2.5 (19 1/4" x 15 1/2" x 1")Sold without copyright; see notice in the Buyer's Guide.Estimate: £1,000 - 1,500 Ω

Mehr Details

Prop Store
Los 67

Detective Mike Lowrey's (Will Smith) dog tags from Michael Bay's action-comedy sequel Bad Boys II. Mike wore his dog tags in multiple scenes in the film, notably during Marcus Burnett's (Martin Lawrence) family barbeque. He also wore them when he and Marcus inadvertently became involved in a car-chase shootout with Haitian hitmen and Marcus' sister Syd (Gabrielle Union), who was working undercover for the Drug Enforcement Agency. The two metal tags are decorated with an inner border of faux-diamond stones and are suspended on a long ball chain. The lot exhibits minor wear and light scratches on the back of the tags from production use. Dimensions: 44 cm x 4 cm x 0.5 cm (17 1/4" x 1 1/2" x 1/4")Estimate: £800 - 1,200 M

Mehr Details

Prop Store
Los 679

Qui-Gon Jinn's (Liam Neeson) fighting lightsaber from George Lucas' Star Wars: The Phantom Menace. The Jedi Master wielded his lightsaber as he battled against the Trade Federation's droids and duelled with Sith apprentice Darth Maul (Ray Park) on Tatooine and in Naboo's Theed Palace. Qui-Gon's lightsaber was subsequently used by Obi-Wan Kenobi (Ewan McGregor) to avenge his master.Many variations of lightsabers were designed for The Phantom Menace by design director Doug Chiang, with each Jedi having a uniquely crafted lightsaber designed to reflect their personality. Liam Neeson personally picked this hilt design for his character.Produced for stunt purposes, the lightsaber hilt is constructed from resin and features ribbed detailing running from the blade emitter down to the base, creating a grip. The hilt is finished in a combination of black and faux-silver paint, and a red static activator switch adorns one side. A thin protruding metal rod has been cast into the projection plate, added to allow the weapon's blade to be easily affixed. The threaded rod would have been rotoscoped and replaced with a beam of light in post-production. There are minor signs of production use, including paint wear, light scratches and notable scuff marks down one side. Bubble marks from the casting process are still present and the metal rod has become discoloured over time. Dimensions: 44.5 cm x 4 cm x 5 cm (17 1/2" x 1 1/2" x 2")Estimate: £10,000 - 15,000 †

Mehr Details

Prop Store
Los 684

A cast-and-crew-autographed sheet from the production of George Lucas' Star Wars: Attack of the Clones. The white paper sheet features the production title artwork printed at the centre. The lot is autographed in gold and black pen by several of the film's cast and crew, including Ewan McGregor, Hayden Christensen, Christopher Lee, Temuera Morrison, Ahmed Best, Jay Laga'aia, Anthony Daniels, Joel Edgerton, Daniel Logan, Matt Sloan (lead animatronics foreman/Plo Koon), Steven Boyle (creature technician/Senator Ask Aak/Passel Argente), Zachariah Jensen (Kit Fisto), producer Rick McCallum and sound designer Ben Burtt. The lot displays minor marks and light wear to the corners, and red ink splatters are present along the bottom edge. Dimensions: 42 cm x 29.5 cm (16 1/2" x 11 1/2")Estimate: £400 - 600 †Δ

Mehr Details

Prop Store
Los 687

An unfinished version of Count Dooku's (Christopher Lee) lightsaber from George Lucas' Star Wars: Revenge of the Sith. In the Star Wars canon, Dooku studied the Jedi archives, creating his personalised curved lightsaber hilt to best fit his uniquely precise and controlled combat style. This production-made lightsaber is missing some of the components seen on the final version, including the brass-coloured screws, the red resin activator switch and the diamond-like texture on the black grip sections.Crafted in resin and vacuum-metalised, it features a mirror-chrome-plated finish, with four separate black rubber accents and a brass-coloured trigger. At the tip of the guard is a curved protruding detail, which runs down the length of the handle's inner curve to provide counterbalance. The weapon exhibits minimal wear, with light surface scratching to the mirror-chrome finish. Dimensions: 33 cm x 9.5 cm x 4.5 cm (13" x 3 3/4" x 1 3/4")Estimate: £4,000 - 6,000 Ω

Mehr Details

Prop Store
Los 688

Darth Vader's (Hayden Christensen) hero lightsaber from George Lucas' Star Wars: Revenge of the Sith. Anakin Skywalker was renamed Darth Vader when he turned to the dark side, and took his iconic armoured form after sustaining mortal injuries during a duel with Obi-Wan Kenobi (Ewan McGregor) on the fiery planet of Mustafar. Kenobi ultimately took his weapon, forcing Vader to create a new lightsaber hilt design, which he would use throughout his remaining days as a Sith Lord.This particular lightsaber did not appear on-screen in the final cut of the film, as it was clipped too far around on Vader's belt, and therefore hidden beneath parts of his costume. However, it was seen in numerous publicity stills and promotional photos. The lightsaber was gifted by the film's producers to celebrated stunt coordinator and sword master Nick Gillard on completion of the prequel trilogy. The main body of the lightsaber is constructed from turned aluminium and is decorated with several detailed components made from resin, rubber and metal. Some sections of the hilt display a mirror-silver chrome finish. Seven black rubber strips form the handgrip and a round power indicator is situated on one side. Located at the centre of the hilt is a Sith crystal chamber, which features a silver-coloured strip decorated with a black geometric design and a protruding activator switch. The two blade power adjusters are painted in shades of metallic faux bronze and the top of the hilt features a bevelled emitter shroud. Minor signs of wear from production use are present on the lightsaber, including light surface scratching on the chrome finish, light paint wear on the power adjusters and visible remnants of glue around the edges of some of the rubber strips. It is accompanied by a letter of authenticity from Gillard and a copy of Star Wars Revenge of the Sith: The Visual Dictionary. Dimensions: 28.5 cm x 5.5 cm x 5 cm (11 1/4" x 2 1/4" x 2")LiteratureAn image of Darth Vader's lightsaber can be seen on page 63 of Star Wars Revenge of the Sith: The Visual Dictionary, published by Dorling Kindersley.Estimate: £40,000 - 80,000 M

Mehr Details

Prop Store
Los 689

Obi-Wan Kenobi's (Ewan McGregor) hero lightsaber from George Lucas' Star Wars: Revenge of the Sith. Obi-Wan carried and used his lightsaber in various scenes throughout the saga, notably during a duel on the fiery planet of Mustafar with his former apprentice Anakin Skywalker (Hayden Christensen), by then known as Darth Vader.This hero lightsaber was gifted by the film's producers to celebrated stunt coordinator and sword master Nick Gillard on completion of the prequel trilogy. In the Star Wars canon, Obi-Wan constructed his third and final lightsaber after earning the title of Jedi Master, and continued to use this weapon until he sacrificed himself during his confrontation with Vader aboard the Death Star in A New Hope. The lightsaber's hilt design inspired Obi-Wan's apprentice Luke Skywalker (Mark Hamill) when he created his second, green-bladed lightsaber, which featured in Return on the Jedi. The lightsaber is made of a combination of machined aluminium and cast resin detailing, with a metal core running through the body of the weapon. Some parts of the weapon are vacuum-metallised, with sections of the pommel, controls section and blade projection plate displaying a mirror-silver chrome finish. The handgrip is finished in black, and the power cell reserve cap is painted in dark shades of metallic faux bronze. One side of the hilt features a protruding activation switch which displays a gold-coloured strip decorated with a black circuitry design. Twelve small circles are engraved into the top of the aluminium round projection plate. Minor signs of wear from production use are present on the lightsaber, including light surface scratching on the chrome finish and slight bubbling from the casting process on the reserve cap. A notable scratch is present near the bronze-coloured static button situated to the side of the activation switch. A letter of authenticity from Gillard accompanies the lightsaber. Dimensions: 28 cm x 5 cm x 5.5 cm (11" x 2" x 2 1/4")Estimate: £80,000 - 120,000 M

Mehr Details

Prop Store
Los 698

Two crew T-shirts from the production of George Lucas' Star Wars: A New Hope. T-shirts were gifted to members of the crew.The lot consists of one light yellow cotton T-shirt (size M) and one yellow polyester T-shirt (size L). Both garments feature a triangular logo designed by Ralph McQuarrie, showing an early image of Luke Skywalker (Mark Hamill) holding a red lightsaber, with the text "Star Wars" printed beneath. The T-shirts exhibit minor wear, including small bobbles on the fabric.Estimate: £600 - 800 M

Mehr Details

Prop Store
Los 7

Adam Gibson's (Arnold Schwarzenegger) leather jacket from Roger Spottiswoode's sci-fi action film The 6th Day. Charter pilot Adam wore his leather jacket throughout the film as he attempted to reclaim his identity, after discovering he had been illegally cloned.The Cooper bomber jacket is made of dark brown goatskin leather lined with a khaki synthetic blend fabric, with two pockets adorning the front. Five custom-made embroidered patches decorate the garment and a metal brass-coloured zip runs down the front. The jacket features a faux-fur collar and a knitted stretch waistband and cuffs. The lot exhibits signs of wear from production use, including marks on the leather, light plucks on some of the patches, minor wear on the fur collar and a hole on the left cuff.Estimate: £2,000 - 3,000 M

Mehr Details

Prop Store
Los 700

A miniature model Death Star surface section from George Lucas' Star Wars: A New Hope. This piece was part of a large-scale miniature set of the Death Star's immense surface, and was used for medium altitude shots, in which fighters flew over the Imperial station during the Rebel assault.Designed and built by Industrial Light & Magic's miniature model department, the construction of the Death Star miniatures was a massive undertaking, as the sequence called for a vast battlefield consisting of unique surface panels. Decorated with cast greeblies, the section is constructed from biscuit foam and finished in industrial grey paint. The lot displays light paint wear in places, and minor damage to one corner. Dimensions: 8 cm x 7.5 cm x 2.5 cm (3 1/4" x 3" x 1")Estimate: £1,000 - 1,500 †

Mehr Details

Prop Store
Los 706

A cast and crew photo book from the production of George Lucas' Star Wars: A New Hope. Photo books featuring behind-the-scenes images were gifted to the cast and crew for their efforts on the production. The photo book is bound in a black card cover, which features the pre-release Ralph McQuarrie-designed sticker showing a rough concept of Luke Skywalker wielding a lightsaber above the working title "The Star Wars". The book contains 25 black-and-white photos, one of which depicts Obi-Wan Kenobi (Alec Guinness) and Darth Vader (Dave Prowse) in battle without visual effects applied to their lightsabers. On the back of the last photo is a message dedicated to prop man Joe Dipple, autographed by George Lucas and producer Gary Kurtz. The photo book exhibits relatively minor wear, with light edge wear, creasing and minor marks on the card cover. Dimensions: 20.5 cm x 26 cm x 1 cm (8" x 10 1/4" x 1/2")Estimate: £2,000 - 3,000 M

Mehr Details

Prop Store
Los 709

A pair of acrylic star crew gifts and bags from the production of George Lucas' Star Wars: A New Hope. Engraved stars were given to cast and crew in commemoration of their work on the movie, as well as to select attendees of exclusive screenings.This lot consists of two clear acrylic stars, meant originally to be used as paperweights, with the words "Star Wars" engraved in one and "May The Force Be With You" in the other. Each star includes the rare original blue velvet draw-string bag it was initially gifted in. The lot is in excellent overall condition with minor wear from handling and age, including some light scuffing throughout. Dimensions (each): 14 cm x 14 cm x 3 cm (5 1/2'' x 5 1/2'' x 1 1/4)Estimate: £2,500 - 3,500 Ω

Mehr Details

Prop Store
Los 713

A Cantina band member's creature hands from George Lucas' Star Wars: A New Hope. The seven-piece band - known as Figrin D'an and the Modal Nodes - performed in the Mos Eisley Cantina, where Luke Skywalker (Mark Hamill) and Obi-Wan Kenobi (Alec Guinness) met with the smuggler Han Solo (Harrison Ford) to arrange transportation from of Tatooine to Alderaan. Made from cast latex, the large one-piece gloves feature indented knuckles, raised vein detailing, curled, pointed nails, and overlapping sections running down the wrists. The hands are finished in varying shades of brown, and both display intentional splits up the back of the wrist to allow easy fitting and removal. Yellow pieces of mesh are adhered inside the intentional cuts. The hands exhibit some signs of wear due to age and production use, including light paint wear and some very minor cracks. Dimensions (each): 38 cm x 22 cm x 7 cm (15" x 8 3/4" x 2 3/4")Estimate: £8,000 - 10,000 M

Mehr Details

Prop Store
Los 717

Seven on-set and candid stills from the production of Steve Binder's television spin-off The Star Wars Holiday Special. The three on-set stills show Luke Skywalker (Mark Hamill) in his Rebel flight suit with R2-D2; Princess Leia (Carrie Fisher) with C-3PO (Anthony Daniels); and a line up of the main cast members, with Chewbacca (Peter Mayhew) sporting a red "Life Day" robe. The remaining four photographs include a headshot of Fisher and Harrison Ford; Hamill holding an autographed Star Wars poster; and two black-and-white candid shots of Hamill, Fisher and Ford. The set displays light surface scratches and minor edge wear, while the edges of some images have curled over time. Dimensions (each still): 20.5 cm x 25.5 cm (8" x 10")Estimate: £200 - 300 M

Mehr Details

Prop Store
Los 718

A collection of ten R2-D2 drinking mats from the promotion of Irvin Kershner's Star Wars: The Empire Strikes Back. Drinking mats were gifted to members of the crew who worked on The Empire Strikes Back.Made of cardboard, the set of metallic-blue-and-matte white mats feature the words "Star Wars The Empire Strikes Back" surrounding an R2-D2 insignia. Some of the mats display light scratching, small areas of wear to the metallic blue finish and minor staining on the back. Dimensions (each mat): 9.5 cm x 9.5 cm x 0.1 cm (3 3/4" x 3 3/4" x 1/4")Estimate: £300 - 500 M

Mehr Details

Prop Store
Los 719

A set of door signs from the production of Irvin Kershner's Star Wars: The Empire Strikes Back. Signs adorned the door of each department, and were displayed in restricted areas on location at the Finse 1222 hotel in Norway, where the Hoth scenes were filmed.The lot consists of three white card signs, all featuring a screen-printed The Empire Strikes Back logo and hand-painted blue titles applied by the film's lettering artist. The titles include "Art Dept." and "Construction", with the third sign blank. The set displays slight discolouration from age, light edge wear and marks from use. Dimensions (each sign): 7.5 cm x 33 cm x 0.2 cm (3" x 13" x 1/4")Estimate: £400 - 600 M

Mehr Details

Prop Store
Los 722

A fan club poster collage from the production of Irvin Kershner's Star Wars: The Empire Strikes Back. This poster was purportedly displayed on a wall in producer Gary Kurtz's office and has been consigned by the crew member who saved the piece from a skip, after being tasked with dismantling Kurtz's office after the production had finished. Adhered to a large sheet of blue-painted cardboard, the collage consists of a 1977 official fan club poster by Ralph McQuarrie showing Luke Skywalker (Mark Hamill) in his X-wing fighter; a promotional still of Luke, Princess Leia (Carrie Fisher), Han Solo (Harrison Ford) and Chewbacca (Peter Mayhew); a smaller still of Luke; four Star Wars logo stickers, including a triangular McQuarrie design; a membership card; and the top section of a fan club introductory letter. The lot displays light marks, paint wear around the edges and minor creasing on some of the collage pieces. Dimensions: 101.5 cm x 66.5 cm x 0.2 cm (40" x 26 1/4" x 1/4")Estimate: £800 - 1,200 M

Mehr Details

Prop Store
Los 727

A George Lucas-signed check from the production of Irvin Kershner's Star Wars: The Empire Strikes Back. During the production, Lucas wrote a check to modelmaker and camera assistant Paul Huston for four ILM shirts.This lot consists of a printed paper check for $22.00, made out to Paul Huston and signed by Lucas with an attachment detailing the shirt order, and set in a white and silver-colour paper Industrial Light & Magic (ILM) envelope marked "Lucas Check" handwritten in black ink. The lot is in excellent overall condition with minimal wear from age. Dimensions: 21.75 cm x 28 cm (8 1/2" x 11")Estimate: £1,200 - 1,600 ΩΔ

Mehr Details

Prop Store
Los 728

Hand-drawn Paul Huston probe droid final and preliminary artworks for an Industrial Light & Magic (ILM) crew shirt from the production of Irvin Kershner's Star Wars: The Empire Strikes Back. Shirts featuring Huston's illustration of a tap-dancing imperial probe droid were distributed to ILM crew members.This lot consists of seven hand-drawn artworks on vellum and illustration paper, including the final illustration which matches exactly to the one on the shirts, two near-final alternates, and four smaller concept sketches. Also included are four printed black-and-white copies used for the silkscreen production process. The final, alternates, and small concepts are illustrated in ink and correction fluid with creative notes in ink and graphite. The set exhibits visible signs of wear and handling, including creasing, folding, and minor stains throughout, but it remains in good overall condition. Dimensions (largest): 35.75 cm x 43.25 cm (14" x 17"); (smallest): 6.5 cm x 30.5 cm (2 1/2" x 12")Sold without copyright; see notice in the Buyer's Guide.Estimate: £3,000 - 5,000 ΩΔ

Mehr Details

Prop Store
Los 741

A pair of R2-D2 (Kenny Baker) ankle cylinder holders from Irvin Kershner's Star Wars: The Empire Strikes Back. Metal devices secured the distinctive cylinders on R2's outer ankles to the droid's legs.These two crescent-shaped metal wedges are painted light grey on the exterior to match R2's signature colour scheme. They are in fair overall condition with visible bending, chipped paint, and staining from age and use. Dimensions (each): 12.75 cm x 3.25 cm x 3.25 cm (5" x 1 1/4" x 1 1/4")Estimate: £800 - 1,000 Ω

Mehr Details

Prop Store
Los 748

A set of door signs from the production of Irvin Kershner's Star Wars: The Empire Strikes Back. Signs adorned the door of each department, and were displayed in restricted areas on location at the Finse 1222 hotel in Norway, where the Hoth scenes were filmed.The lot consists of four white card signs, all featuring a screen-printed The Empire Strikes Back logo and hand-painted blue titles applied by the film's lettering artist. The signs are marked "Sound Dept.", "Publicity" and "No Entry", while the fourth sign remains blank. The set displays slight discolouration from age, light edge wear and marks from use. Dimensions (each sign): 7.5 cm x 33 cm x 0.2 cm (3" x 13" x 1/4")Estimate: £400 - 600 M

Mehr Details

Prop Store
Los 749

A Blue Harvest crew cap from Richard Marquand's Star Wars: Return of the Jedi. Blue Harvest was a working title used by the production company to divert attention from one of the most anticipated films of all time. Custom made by The Thinking Cap Co., the cap is made of grey cotton and displays an embroidered patch reading "Blue Harvest" in the stylized Star Wars font. A black plastic sizing band is located at the back, and the cap is marked as one size fits all. The lot displays light wear, minor plucks to the stitching on the peak and small patches of yellowing on the white embroidery.Estimate: £400 - 600 M

Mehr Details

Prop Store
Los 750

A cast-and-crew party invitation, ID card and car pass from the production of Richard Marquand's Star Wars: Return of the Jedi. The lot consists of a light green paper invitation to a cast-and-crew Christmas drinks event; an ID card for crew member Philip Babbage; and a car pass housed within a plastic wallet. The pass features a car registration number, an employee number and an authorisation signature, all written in blue marker. The lot displays minor marks and light edge wear, with several crease lines on the invitation, and the ink of the car pass has faded slightly over time. Dimensions: (invitation): 27.5 cm x 21.5 cm (10 3/4" x 8 1/2"); (ID card in wallet): 7.5 cm x 10.5 cm (3" x 4 1/4"); (car pass): 9.5 cm x 12 cm (3 3/4" x 4 3/4")Estimate: £200 - 300 M

Mehr Details

Prop Store
Los 752

An autographed photograph from the promotion of Richard Marquand's Star Wars: Return of the Jedi. The black-and-white promotional headshot is autographed by Fisher in black ink and displays a unique message dedicated to her long-term make-up artist Kay Freeborn, wife of renowned make-up supervisor Stuart Freeborn. Fisher has dedicated the photo "Love, Margo [sic] Kidder" referring to an inside joke she had with Kay about how she resembled the Superman actress in this photo. The ink has faded slightly in some places and the photo displays minor wear and very light surface scratches. Dimensions: 25.5 cm x 20.5 cm (10" x 8")Estimate: £400 - 600 M

Mehr Details

Prop Store
Los 755

A set of 14 Polaroids of creature maquettes from the production of Richard Marquand's Star Wars: Return of the Jedi. These Polaroids were originally part of a reference bible used by the heads of department during the production, with each photograph displaying a visible reference number. The images show different angles of maquettes for five unnamed creatures designed to appear in Jabba the Hutt's palace. The lot is presented in five plastic wallets, each containing a Post-it Note featuring the depicted creature's nickname: "Perry Scope", "Man With A Horn", "Cheap Throat", "Barnacle Bill" and "M.T.". Light surface scratches are present on the plastic wallets, and the Polaroids display some minor marks around the edges. Dimensions (one larger Polaroid): 13 cm x 10.5 cm (5 1/4" x 4 1/4"); (one smaller Polaroid): 11 cm x 8.5 cm (4 1/4" x 3 1/4")Estimate: £400 - 600 †Δ

Mehr Details

Prop Store
Los 756

A rare Chelsea Pottery plate crew gift from the production of Richard Marquand's Star Wars: Return of the Jedi. Commemorative plates were given to heads of departments by director Richard Marquand, as thanks for their work on the film. Hand-made by Chelsea Pottery, the plate bears the film's original title "Revenge of the Jedi" and the year of filming. It is glazed with a light and dark brown finish, and there are two holes on the rear allowing it to be displayed. The plate has minimal wear and still retains the original Chelsea Pottery sticker on the back. Dimensions: 18.5 cm x 18.5 cm x 3 cm (7 1/4" x 7 1/4" x 1 1/4")Estimate: £1,000 - 1,500 M

Mehr Details

Prop Store
Los 758

A collection of tickets and invitations from the production and promotion of various Star Wars movies. The lot consists of a faux-silver invitation to a principal photography wrap party held at Elstree Studios; a screening ticket for The Empire Strikes Back; a special preview screening ticket for Return of the Jedi; and a wrap-party invitation for The Phantom Menace. All four pieces are printed on card and feature the locations, dates and times for each event. The lot displays minor crease lines in multiple corners, light edge wear and notable dirt marks on the Empire Strikes Back screening ticket. Dimensions (largest invitation): 14 cm x 20.5 cm (5 1/2" x 8")Estimate: £200 - 300 M

Mehr Details

Prop Store
Los 761

Han Solo (Harrison Ford) and other oversize toys from the promotion of J.J. Abrams' Star Wars: The Force Awakens. These prototypes were for toys that never went into production of the legendary smuggler Han Solo (Harrison Ford), Rebel pilot Temmin "Snap" Wexley (Greg Grunberg), and space pirates Sidon Ithano (Cavin Cornwall) and Quiggold (Matthew Wood). The Han and Snap toys are cast in dark grey resin and retain a rough, unfinished texture, while the Sidon and Quiggold toys are cast in light grey resin with a smooth finish. The prototypes do not move, but are constructed with joints where the limbs would pivot in the final version. Each toy stands on a wooden display board. There is little wear from use, with some minor scratches and imperfections from the casting process. Dimensions (largest): 19 cm x 29 cm x 45 cm (7 1/2" x 11 1/2" x 17 3/4"); (smallest): 10 cm x 17 cm x 40 cm (4" x 6 3/4" x 15 3/4")Estimate: £4,000 - 6,000 M

Mehr Details

Prop Store
Los 764

A life-size Captain Phasma figure display from the promotion of J.J. Abrams' Star Wars: The Force Awakens. Originally obtained from Disney, this statue was first displayed in the Galeries Lafayette in Paris during the festive period of 2015, and was then the main prize in a Star Wars competition run by German newspaper Bild.Mounted on a rectangular base, the display shows the First Order captain holding a resin F-11D blaster rifle which features a faux scope. Phasma is dressed in her distinctive silver-coloured chrome armour, which is made of fibreglass, with a black ribbed undersuit. Draped over her left shoulder is a thick black fabric cape decorated with a red trim. Several of the armour components exhibit light scuffing, there is a crack present on the front of the belt, and the cape displays minor wear. Dimensions (display): 55 cm x 100.5 cm x 205 cm (21 3/4" x 39 1/2" x 80 3/4")Special shipping required: see special shipping notice in the Buyer's Guide.Estimate: £4,000 - 6,000 M

Mehr Details

Prop Store
Los 765

A Darth Vader crew gift statue, bag and art book from the production of Gareth Edwards' Star Wars prequel Rogue One: A Star Wars Story. Gifted to heads of departments, the black resin statue shows the iconic Sith Lord with his head bowed, standing on a base resembling a mound of volcanic rock. "Hodges 15" is etched on the back of the base, indicating it was created by H.O.D. sculptor David Hodges. The navy cotton bag features the film's title stitched along the side. It has four brass-ringed eyelets, a cream-coloured canvas strap, and comes with a cotton dust bag. Also included in the lot is a copy of The Art of Rogue One: A Star Wars Story, which contains an array of paintings, sketches, costume designs, storyboards and vehicle designs. The edges of the book cover display light wear, and the dust bag exhibits minor marks. Dimensions (statue): 14 cm x 17 cm x 46 cm (5 1/2" x 6 3/4" x 18"); (empty bag): 67 cm x 38 cm x 2 cm (26 1/4" x 15" x 3/4"); (book): 27.5 cm x 30 cm x 3 cm (10 3/4" x 11 3/4" x 1 1/4")Estimate: £1,000 - 1,500 †Δ

Mehr Details

Prop Store
Los 767

A life-size First Order Executioner Stormtrooper figure display from the promotion of Rian Johnson's Star Wars: The Last Jedi. This display was created by the same production team who worked on the movie using original production reference. Mounted on a round, metal base, the display shows the Executioner Stormtrooper holding a resin BL-155 Laser axe in both hands. The Stormtrooper is dressed in sculpted white armour components made of fibreglass and resin; black pauldrons decorated with the First Order emblem; and a black ribbed undersuit. The lot displays minor signs of wear, including scratches on the display base, light scuffing, and small chips to the paint finish on the laser axe which is also missing one of the smaller laser mechanisms. Dimensions (displayed): 120 cm x 114 cm x 194 cm (47 1/4" x 44 3/4" x 76 1/4")Special shipping required; see special shipping notice in the Buyer's Guide.Estimate: £4,000 - 6,000 †Δ

Mehr Details

Prop Store
Los 768

A light-up remote-control R2-S8 droid from Ron Howard's Solo: A Star Wars Story. The astromech droid R2-S8 was seen displaying a hologram for a pair of Imperial stormtroopers at the Coronet Spaceport on Corellia, just after Han (Alden Ehrenreich) was separated from Qi'ra (Emilia Clarke). The droid was later recreated as an action figure as part of the Star Wars: Droid Factory toy set.Constructed by Stuart Bone, this droid was originally built for use on Rogue One: A Star Wars Story, although its scene was cut from the final film. It has a plywood frame and legs, with a fibreglass dome and a hand-cut aluminium outer skin. Its hand-painted finish is predominantly white, black and red, and the droid is intentionally distressed to look dusty, dirtied and well-used during its life at the spaceport.R2-S8 can be driven by remote control with a rotating dome and light effects, powered by battery. The back panel can also be removed, and is autographed in blue pen by R2-D2 performer Kenny Baker. Also written on the panel are three sets of dates and locations, indicating when the droid was used for filming. Bone's "UK R2D2 Builders Pass" is clipped inside the chassis, along with badges for the "Astromech Droid Collection" and the "R2-D2 Builders Club".R2-S8 comes with a rechargeable battery pack and a Spektrum DXe remote control to operate its movement and head. The remote control comes in a foam-padded carrying case, along with various accessories. The droid has some wear from production use, aside from the intentional distress. There are some scuffs and scratches, and a couple of small areas where paint has chipped away. Dimensions: 75 cm x 70 cm x 110 cm (29 1/2" x 27 1/2" x 43 1/4") Contains electronics; see electronics notice in the Buyer's Guide.Special shipping required; see special shipping notice in the Buyer's Guide.Estimate: £40,000 - 60,000 M

Mehr Details

Prop Store
Los 77

A Joker crew gift statue from the production of Tim Burton's superhero film Batman. A limited number of statues were gifted to the department heads and senior crew who worked on the movie.Made of resin, the figure shows the maniacal Joker (Jack Nicholson) standing proudly while holding his fedora. The statue displays defined detailing, including his suit, slicked-back hair and villainous smile. Displaying a metallic brass powder finish, the statue contains an internal metal armature and is mounted on a wooden base. The crew gift displays light wear and scratches, with minor damage to the right hand. Dimensions: 10 cm x 37 cm x 46 cm (4" x 14 3/4" x 18 1/4")Estimate: £400 - 600 †Δ

Mehr Details

Prop Store
Los 773

A remote-controlled light-up R5 droid from the production of J.J. Abrams' Star Wars: The Rise of Skywalker. Within the Star Wars universe R5 astromech droids were considered budget versions of the more iconic R2 series and were used to fix equipment and machinery. Although not seen in the final cut of the film, this R5 droid was rented into the production and has a fully functioning body.The droid has a resin, acrylic and fibreglass frame and a resin head, and is hand-painted predominantly white and yellow, with intentional distressing applied to make it appear dirtied, rusted and well-used. Inside its body are two stickers, reading "Creature FX Dept Pinewood 2014" and "Creature FX Dept Pinewood 2015", respectively. The droid has an internal battery that can be recharged using an accompanying cable.The droid is controlled using a modified PlayStation controller. The head can only move from side to side, but the body has more functionality, with different controller inputs manipulating the movement, lights, actions and sounds. Two flaps at the front open up, and the droid's lights can be made to flash. It also makes a variety of noises, including electronic sounds, music and even dialogue. The droid has some wear from production use, beyond the intentional distress, and comes with a laminated sheet of input commands. Dimensions: 72 cm x 62 cm x 130 cm (28 1/4" x 24 1/2" x 51 1/4") Contains electronics; see electronics notice in the Buyer's Guide.Special shipping required; see special shipping notice in the Buyer's Guide.Estimate: £20,000 - 30,000 †Δ

Mehr Details

Prop Store
Los 777

A theme park construction sign promoting Star Wars: Galaxy's Edge, the themed attraction now open at Disneyland and Disney's Hollywood Studios. This was one of several signs attached to fences around the theme park to promote the new Star Wars-themed area while it was being built. Made of metal and plastic, the sign features printed concept art showing a blue X-wing fighter flying towards the themed area, which represents the village of Black Spire Outpost on the planet Batuu. The scene features towering rocks, markets, landing zones and the Millennium Falcon situated in a cargo bay. "Coming soon for your future enjoyment" is printed in black along the bottom and screw holes are present in each corner. The lot exhibits signs of wear from use, including light scratches and notable scuffing around the edges. Dimensions: 122 cm x 71 cm x 0.3 cm (48" x 28" x 1/4")Estimate: £2,000 - 3,000 M

Mehr Details

Prop Store
Los 778

Lamia's (Michelle Pfeiffer) curved witches' dagger from Matthew Vaughn's fantasy adventure Stardust. A curved dagger was presented to the powerful witch by her sisters after she consumed the remains of a star's heart to regain her youth. The dagger was displayed on a pillow, alongside two other weapons.The dagger comprises a dark-tinted curved blade made of acrylic, with strands of black suede-like fabric wrapped around the bottom to create a padded handle. There are light scratches and scuff marks on the blade from use during production and the fabric on the handle exhibits minor wear. Dimensions: 40 cm x 5 cm x 2 cm (15 3/4" x 2" x 3/4")Estimate: £1,000 - 1,500 M

Mehr Details

Prop Store
Los 78

A hand-drawn Batman (Michael Keaton) costume design from the production of Tim Burton's superhero film Batman. Created by Academy Award®-nominated costume designer Bob Ringwood, the large artwork shows a front view of the Caped Crusader's Batsuit, exhibiting a defined muscular physique, angular armour plating, and a grill-like abdominal section. The artwork comprises layered printed pieces adhered to a large sheet of thick card, with black marker applied to add definition, and a finer black pen used for outlining. The chest emblem and utility belt are rendered in yellow, and Ringwood's signature is situated under the right boot. This design was hanging on a studio wall when Batman co-creator Bob Kane visited the set of Burton's sequel Batman Returns. Kane has written a personalised message addressed to Ringwood, signed the artwork, and dated his signature "'91". Pin holes are present in each corner, and the artwork displays signs of light wear, including some minor marks and peeling on the left side of the belt. Dimensions: 73.5 cm x 37.5 cm (29" x 14 3/4") Sold without copyright; see copyright notice in the Buyer's Guide.Estimate: £6,000 - 8,000 M

Mehr Details

Prop Store
Los 781

A light-up naquadah reactor from the sci-fi television series Stargate SG-1. The reactor was developed by the Orbanians to generate clean energy from the mineral naquadah, and was seen in the Season 3 episode "Learning Curve". The reactor is a clear acrylic box containing a blue light source. The box is decorated with an intricate, layered pattern made of resin and painted to look like metal. The reactor is illuminated with a hidden switch along one edge, painted to blend in with the pattern. The reactor has some wear from production use and age. Due to the fragility of the resin pattern, several small pieces have come away, and two of the panels are a little loose on the sides. Dimensions: 31 cm x 15.5 cm x 15.5 cm (12 1/4" x 6 1/4" x 6 1/4") Contains electronics; see electronics notice in the Buyer's Guide.Estimate: £3,000 - 5,000 M

Mehr Details

Prop Store
Los 785

A light-up Asuran Replicator stunner and holster from the sci-fi television show Stargate: Atlantis. Asuran Replicators used their stunners during the third and fourth seasons of the show to incapacitate or kill their enemies.The pistol is made of metal with foam padding around the grip. The underside of the barrel can be pulled down, revealing a faux crystal made of resin. A small switch near the trigger on the underside of the barrel illuminates the crystal and a strip of lights down each side. The stunner is intentionally brushed and tarnished to look well used. The holster is made of brown leather and has a loop to attach it to a belt. An elasticated strap at the top of the holder secures the pistol in place. There is some minor wear on both pieces, including some scuffing and scratches, and there is a noticeable dent in the metal at the back of the stunner. Dimensions (stunner): 25 cm x 3.5 cm x 13 cm (9 3/4" x 1 1/2" x 5") Contains electronics; see electronics notice in the Buyer's Guide.Estimate: £2,000 - 3,000 M

Mehr Details

Prop Store
Los 79

A set of printed costume designs for Batman (Michael Keaton) and the Joker (Jack Nicholson) from the production of Tim Burton's superhero film Batman. This lot was originally part of a Batman prop exhibition displayed in "The Way In" department at Harrods.These production-used prints show original designs created by Academy Award®-nominated costume designer Bob Ringwood.The lot consists of two full-length designs of the Caped Crusader, a close-up of Batman's cowl and chest, and a full-length illustration of the Joker in his vibrant purple attire. Ringwood's name appears on all three of the designs. There are minor signs of wear including creasing, light edge wear and pin holes, and a horizontal fold line is present on the Joker artwork. Glue remnants and pieces of Velcro still remain on the back of two of the sheets. Dimensions: (each Batman design): 42 cm x 29.5 cm (16 1/2" x 11 1/2"); (Joker design): 37.5 cm x 29 cm (14 3/4" x 11 1/2") Sold without copyright; see copyright notice in the Buyer's Guide.Estimate: £1,000 - 1,500 M

Mehr Details

Prop Store
Los 802

A Fortress of Solitude crystal from Richard Donner's superhero film Superman. Crystals were seen in Superman's (Christopher Reeve) otherworldly Arctic retreat when he summoned the consciousness of his father Jor-El (Marlon Brando).The crystal shard is made of clear resin and features uneven pointed ends. There are minor signs of wear from production use, including light surface scratches and scuff marks. Dimensions: 29 cm x 3.5 cm x 2.5 cm (11 1/2" x 1 1/2" x 1")Estimate: £3,000 - 5,000 M

Mehr Details

Prop Store
Los 804

Superman/Clark Kent's (Christopher Reeve) torn photo-booth strip from Richard Lester's superhero sequel Superman III. During the film's opening credits, Clark Kent ran into a photo booth, which captured his transformation into Superman. He then tore off the bottom photo and handed it to a child.Printed on glossy paper, the four black-and-white photos show Kent removing his glasses and civilian clothing to reveal his superhero costume underneath. Each photo is surrounded by a thin black border, and the bottom of the strip is intentionally torn. The upper-left corner of the torn section has bent slightly over time and the strip displays very light edge wear. Dimensions (larger piece): 15 cm x 4.5 cm (6" x 1 3/4"); (torn piece): 6 cm x 4.5 cm (2 1/2" x 1 3/4")Estimate: £2,000 - 3,000 †Δ

Mehr Details

Prop Store
Los 806

A still autographed by Christopher Reeve from the production of Sidney J. Furie's superhero sequel Superman IV: The Quest for Peace. The black-and-white image is autographed by Reeve in blue ballpoint pen, with a personal message inscribed to credited stuntman and Superman double, Mark Stewart. The photo displays light scratches, minor discolouration along the top edge, and glue remnants on its reverse. Dimensions: 20.5 cm x 25.5 cm (8" x 10")Estimate: £200 - 300 †Δ

Mehr Details

Prop Store
Los 813

Sir Christopher Lee's personal shooting script from the production of Tim Burton's slasher musical Sweeney Todd: The Demon Barber of Fleet Street. This lot comes from the personal collection of legendary actor Sir Christopher Lee, who was originally cast as the "Gentleman Ghost", however the character was cut from the final release of the film. Bound by a metal script clip, the shooting script is dated "16th November, 2006" and consists of 128 unannotated pages printed on white A4 paper. A faded watermark reading "Christoper Lee, Cast" adorns each page, and the cover page is autographed by composer Stephen Sondhiem in black ink. The document displays light wear to the page edges and folded corners, and a mark is present on the cover. Dimensions: 30 cm x 21 cm x 2 cm (11 3/4" x 8 1/4" x 3/4")Estimate: £600 - 800 M

Mehr Details

Prop Store
Los 816

The T-1000's (Robert Patrick) chrome holster from James Cameron's sci-fi action sequel Terminator 2: Judgment Day. Sent from the future to kill John Connor (Edward Furlong), the eventual leader of the human resistance, the T-1000 was made from a liquid metal known as mimetic polyalloy, which allowed it to shapeshift throughout the film. This holster was part of a fully chromed police outfit made from Mylar, worn during the steel mill fight scene with the T-800 Terminator (Arnold Schwarzenegger), just before the T-800's arm was trapped in a large drive-chain.The Tex Shoemaker & Sons holster is made of thick leather with a silver-coloured chrome finish and visible lines of stitching all over. A large belt loop is situated at the back, and a second loop featuring a popper fastening is present at the front. Signs of wear are present, including light scratches, creasing to the leather, some fingerprint marks, and slight yellowing to the chrome finish. Dimensions: 24 cm x 11 cm x 8 cm (9 1/2" x 4 1/4" x 3 1/4")Estimate: £1,500 - 2,500 Ω

Mehr Details

Prop Store
Los 82

A model miniature Joker helicopter from Tim Burton's superhero film Batman. A model helicopter was used during the film's climactic scenes, in which one of the Joker's (Jack Nicholson) henchmen assisted in the maniacal villain's attempt to escape a ledge high up on Gotham City cathedral. The Joker's helicopter was also briefly seen when he used a megaphone to mock Batman (Michael Keaton) after the superhero blew up Axis Chemicals. Two different scale models of the helicopter were created for the production, with this one being the smaller of the two, used for exterior shots of the vehicle in flight. A copy of the AÃĩrospatiale SA 341 Gazelle, the model is made primarily of plastic, with wooden rotors, and painted in a lime-green-and-white colour scheme. Decals of the Joker laughing in front of a yellow-and-red target adorn each side, and three wooden seats finished in grey are located within the cockpit. The exterior of the model is intentionally distressed and dirtied, producing a more realistic appearance.A red light fitted into the helicopter's left-hand side flashes when powered by a pair of 9V batteries, stored within two battery packs hidden behind the back seat. The seat and battery packs are fitted with black Velcro to allow easy access and replacement. The search lamp and rotors remain untested. The model displays signs of wear, including light scratching, minor paint wear on the rotor, and some flaking of the green paint over time, notably on the right side. The lot is accompanied by a Warner Bros. Pictures certificate of authenticity. Dimensions: 70 cm x 64 cm x 23 cm (27 1/2" x 25 1/4" x 9")Contains electronics; see electronics notice in the Buyer's Guide.Estimate: £8,000 - 12,000 Ω

Mehr Details

Prop Store
Los 821

A hero musketeer rapier from Stephen Herek's action adventure The Three Musketeers. Athos (Kiefer Sutherland), Porthos (Oliver Platt) and Aramis (Charlie Sheen) wielded this style of rapier throughout the film as they and aspiring musketeer D'Artagnan (Chris O'Donnell) endeavoured to foil Cardinal Richelieu's (Tim Curry) evil plans.Made of steel, the sword comprises a long thin blade; a complex hilt consisting of several interwoven cylindrical bands running from the base of the blade to the pommel; a black rubber grip decorated with silver-coloured threading; and a metal pommel featuring engraved blue striping. An ornate, blue-painted cross and several fleur-de-lis emblems are incorporated into the hilt. The weapon exhibits signs of production use, including light paint wear, minor tarnishing on the metal, and some scratches along the blade. Dimensions: 111 cm x 17 cm x 13 cm (43 3/4" x 6 3/4" x 5")Estimate: £3,000 - 5,000 †

Mehr Details

Prop Store
Los 822

D'Artagnan's (Chris O'Donnell) hero rapier from Stephen Herek's action adventure The Three Musketeers. D'Artagnan wielded his rapier throughout the film, as he travelled to Paris to pursue his hopes of becoming a musketeer, joining Athos (Kiefer Sutherland), Porthos (Oliver Platt) and Aramis (Charlie Sheen) in their endeavours to foil Cardinal Richelieu's (Tim Curry) evil plans.The sword comprises a long thin steel blade; a complex faux-gold hilt consisting of several interwoven cylindrical bands running from the base of the blade to the pommel; a rubber grip wrapped in silver-coloured threading; and an ornate gold-coloured pommel. An intricate patterned cross and several fleur-de-lis emblems are incorporated into the hilt. The weapon exhibits signs of production use, including minor tarnishing and scratches on the metal blade, with light paint wear on the hilt. Dimensions: 112 cm x 17 cm x 14 cm (44" x 6 3/4" x 5 1/2")Estimate: £6,000 - 8,000 †

Mehr Details

Prop Store
Los 827

Nora's (Ann-Margaret) jumpsuit from Ken Russell's musical fantasy Tommy, based on The Who's classic album of the same name. Nora memorably wore her silver outfit while she sang "Champagne" and experienced a nervous breakdown thinking about Tommy's (Roger Daltrey) condition.Made from a metallic silver crochet weave, the jumpsuit features a halterneck-style top with a peach-coloured mesh bodysuit adhered to the inside. Five covered buttons and several hook-and-eye fastenings are adhered to the back of the garment and the trousers display floral shapes incorporated into the weave. The costume displays signs of production use, including light plucks and discolouration on the trouser hems. Small holes have formed in places due to the delicate nature of the garment.Estimate: £1,500 - 2,500 †Δ

Mehr Details

Prop Store
Los 828

A clapperboard from the production of Tony Scott's action film Top Gun. The clapperboard consists of an acrylic slate with a wooden clapper fixed to the top. The production company "Simpson - Bruckheimer" runs along the top, and the production title "Top Gun" is situated further down the slate, both engraved in blue. Two fields for scene and take are outlined in blue, and feature written details in black ink, including "133E" and "2". The names of director Tony Scott and director of photography Jeffrey L. Kimball are situated below, and the date is marked as "8.9.85". The clapperboard displays signs of production use, including dirt marks, scuffing to the paint on the arm, light scratches to the acrylic and loss of black ink where it has rubbed away in places over time. Dimensions: 3.5 cm x 28 cm x 22.5 cm (1 1/4" x 11" x 8 3/4")Estimate: £4,000 - 6,000 M

Mehr Details
Loading...Loading...
  • 534325 Los(e)
    /Seite

Kürzlich aufgerufene Lose