We found 235302 price guide item(s) matching your search
There are 235302 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
235302 item(s)/page
Lot 8
A Regency flame mahogany long case clock, arched painted 33cm dial, Arabic chapter, date aperture, lion to arch, floral spandrels, gilt hands signed W Roar/Whitby, thirty hour movement striking on a bell, the hood with swan neck pediment with brass paterae, centred by urn finial, turned columns, shaped trunk door flanked by fluted quarter columns, 203cm high, c.1820 William Raw was working at Whitby was born 1791, apprenticed 1805-1811, and was working 1813-1858, subscribing to Young's 'History of Whitby' in 1817
Lot 380
A Russian birch and marquetry cabinet , mid 19th century A Russian birch and marquetry cabinet , mid 19th century, the central section with a classical triangular pediment inlaid with arabesques and scrolling leaves and surmounted by a foliate-inlaid finial, the frieze inlaid with ribbon-tied swags and square panels with rosettes above the arched door inlaid with the Crown of Wurttemberg, within a sunburst and surrounded by ribbons and scrolling leaves issuing from an urn flanked by feathers and above two lions, the moulded shelves fitted with glass and supported by ormolu stags and surmounted by ormolu five-light candelabra, the base with three frieze drawers above a panelled front with two doors and flanked by scrolled projecting supports inlaid overall with roundels, leaves and arabesques, the whole on bun feet, 215cm high, 139cm wide, 59cm deep Provenance: Reputedly a wedding present from the Tsar of Russia to the Wurttemberg Royal family.
Lot 383
A pair of French mahogany and gilt metal mounted side cabinets A pair of French mahogany and gilt metal mounted side cabinets , in Empire style, 19th century, each grey marble top above single frize drawer and single panel door, one mirrored, each enclosing a shelf, flanked by pilasters with female torso capitals and feet terminals, the whole on plinth base, 97cm high, 90cm wide, 49cm deep
Lot 946
A N ORIGINAL AA PHONE BOX, bearing 'Box 436' plate to door and AA Service Box 50 to left handside with signage and maps to interior to include phonetic alphabet and 'Your location is Broadholm tel no Belper 2479', reproduction signage and repairs, overpainted with key, approximately 101cm square x height 287cm (af)
Lot 140
A fine Queen Anne walnut eight-day longcase clock John Knibb, Oxford A fine Queen Anne walnut eight-day longcase clock John Knibb, Oxford, early 18th century The five fully latched and crisply turned finned pillar inside countwheel bell-striking movement with anchor escapement regulated by seconds pendulum, the 11.875 inch square brass dial with delicate border engraved calendar aperture and subsidiary seconds ring to the finely matted centre within an applied silvered Roman numeral chapter ring with stylised fleur-de-lys half hour markers and Arabic five minutes to outer track, with fine pierced steel hands and gilt winged cherub mask spandrels to angles within deep herringbone engraved outer border incorporating signature IOHN * KNIBB * OXON to lower margin, the walnut case with three cast brass flambeau urn finials to the domed caddy surmounted foliate fretwork fronted box upstand above moulded cornice and further conforming foliate pierced fret to frieze, generous three-quarter columns with gilt caps and bases to glazed hood door, the sides with rectangular windows and rear quarter columns set against bargeboards, the trunk with convex throat above 41 inch rectangular door fronted with book-matched burr veneers laid in quarters, the sides divided into pairs of panels within crossbanded borders, on ogee moulded plinth base with book-matched veneers within herringbone bordered crossbanded surround to front over applied moulded double skirt, 240cm (94.5ins) high excluding top finial, 253cm (99.5ins) high overall. John Knibb was born in 1650 and was apprenticed to his older brother, Joseph, in around 1664. When Joseph moved to London in 1670 to set up business (presumably in the workshop inherited from his uncle, Samuel) John, his younger brother, took on the Oxford workshop gaining the Freedom of the city on payment of a fine in 1673. Joseph Knibb retired in 1697 selling up most of his workshop before moving to Hanslop, Buckinghamshire where he made a few clocks prior to his death in 1711. John Knibb became a high profile figure within the City of Oxford twice becoming Mayor, he continued in business until his death in 1722. Due to the comparative rarity of clocks signed by John Knibb it has been suggested that his workshop may have generally served to supply Joseph's larger concern in London. The strong similarities between John's best work and those signed by Joseph would certainly support this view. However it is also clear that John was a high profile tradesman in the City of Oxford who trained no less than ten apprentices, therefore it is perhaps more likely that, although the two workshops were closely connected, they generally worked separately to supply clocks to differing groups of clients. The movement of the current lot is fully latched with the usual delicate wheelwork and typical Knibb feature of having no bridge for the hour wheel to the frontplate. The dial plate is unusual in having a broad herringbone border interrupted by the bold signature at the base which echoes that of an earlier (circa 1680) clock by John Knibb in Ashmolean Museum, Oxford. The half hour markers and engraved decoration to the calendar aperture however are 'typical' of John Knibbs later work; the case echoes London work of the period despite being provincially made (probably Oxford) and is veneered in well chosen figured walnut.
Lot 126
A fine Charles II ebonised eight-day longcase clock Lawrence Debnam, Frome A fine Charles II ebonised eight-day longcase clock Lawrence Debnam, Frome, dated 1675 The two-handed posted countwheel bell striking movement with column-turned corner uprights and resting on integral spikes fitted to the underside of the baseplate, the trains both with offset greatwheels each pivoted between a post attached to the baseplate opposing lug fitted to the one of the frame uprights, the going with anchor escapement incorporating solid ºttery brass' escape wheel and regulated by seconds pendulum, the strike sounding on a bell mounted above, the 10 inch square brass dial with iron hands and fine symmetrical scrolling tulip engraved centre issuing from a stylised urn to lower centre and incorporating flamboyant signature Lawrence Debnam, in Froome Fecit to upper margin, within applied Roman numeral chapter ring with stylised fleur-de-lys half hour markers and Arabic five minutes within the outer minute track, the dial plate engraved with the names Jam: Delanc and John Sentance along with the date 1675 beneath the chapter ring at two o'clock, the angles applied with winged cherub mask cast and pierced spandrels, the ebonised pine case with triangular pediment and architectural frieze over fixed glazed dial aperture and conforming rectangular side windows to the formerly rising hood, the trunk with convex throat moulding and 43 inch rectangular door, the plinth base with ogee mouldings to upper edges and on moulded skirt, 221cm (87ins) high. Literature: The current lot is documented in Darken, Jeff (editor) TIME & PLACE, English Country Clocks 1600-1840 as exhibit 5 pages 30-33 (where the movement and dial is extensively illustrated). Lawrence Debnam is recorded in Loomes, Brian Clockmakers of Britain 1286-1700 as born in Frome, Somerset in 1643 and was working from Cheap Street in the town from at least 1667 and is thought to have died in 1682/3. The presence of James Delance's signature beneath the chapter ring suggests that he was also involved in the making of the current lot. James Delance is recorded by Loomes as born in Downton, Wiltshire in 1655, he is believed to have learnt the clockmaking trade from Lawrence Debnam prior to moving to London in 1677 where he was admitted as a Free Brother to the Clockmakers' Company the following year. Delance remained in London until 1685 when he left the city and returned to Frome where he set up business in Cheap Street - probably succeeding Debnam who died in 1683 at the age of 40. By 1721 Delance had moved to Downton, Wiltshire and was still working in 1736. John Sentance appears to be unrecorded as a clockmaker although it could be considered possible that he was responsible for the remarkable engraved decoration to the centre of the dial. The current lot employs and escape wheel made from work-hardened ºttery brass' formed by hammering a cast solid disc prior to cutting of the teeth. This creates a wheel much more resilient to wear however this process makes it difficult to cross it out hence why it is left as a solid disc when fitted. It is perhaps appropriate to speculate that the current lot is probably one of the earliest West Country clocks to be fitted with anchor escapement with seconds pendulum; as such the maker(s) may have sought to experiment with the metallurgy of the escape wheel in order to ensure longevity of this new technology. This very rare feature appears to have been subsequently used by James Delance (see following lot) and it is testament to both makers that these wheels are still serviceable after over three hundred years of use. The layout of the trains suggests that when originally conceived the current lot was intended to have a duration of thirty-hours, however the maker chose to complete the clock with eight-day continuance and facilitated this by incorporating offset greatwheels each pivoted between a post attached to the baseplate opposing lug fitted to the one of the frame uprights. The frame uses typical 'Bristol' one-piece lantern castings but dispenses with the finials and feet substituting the latter for steel spikes - a feature typical of the early Somerset clocks. Another 'West Country' detail present in the current lot is the keyhole shaped aperture cut into the lower edge of each of the movement pivot plates. The reason for these is unknown however they may be have been intended to allow slight adjustment/tight fitting of the integral locating lugs into the baseplate. The remarkable dial of the current lot is perhaps one of the finest examples of the fully developed Bristol and West Country style made fashionable by makers such as John London of Bristol during the kid 1670's. Indeed the engraving can be compared to a dial by London illustrated in Darken, Jeff (editor) TIME & PLACE, English Country Clocks 1600-1840 on page 38 (exhibit 7 in the exhibition). The exuberant signature is extraordinary in its confidence and execution as such is extremely effective in expressing the pride and individuality of the maker. It is also highly likely that the current lot is the earliest surviving dated provincial clock to have an anchor escapement regulated by seconds pendulum. Indeed the early incorporation of this refinement may be one of the principal reasons why the dial is apparently inscribed by all those involved in its making.
Lot 168
A fine George III mahogany table clock Matthew Dutton and Son, London A fine George III mahogany table clock Matthew Dutton and Son, London, circa 1795 The substantial five pillar twin fusee bell striking movement with half deadbeat escapement regulated by heavy lenticular bob pendulum with pivoted beam rise/fall regulation to suspension, the backplate engraved with script signature Dutton & Son, London above serial number 347 and pendulum holdfast , the 7 inch single sheet silvered brass break-arch Roman numeral dial with repeat signature M. Dutton & Son, London over calendar aperture to centre and Arabic five minutes to outer track, the arch with N/S strike selection switch and subsidiary rise/fall regulation adjustment dial, the break-arch case with hinged brass carrying handle and three generous moulded rectangular pads to top over brass fillet inset glazed front door and arched brass fishscale grille inset side apertures, the rear with glazed break-arch glazed door set within the frame of the case, on cavetto moulded skirt base with cast brass squab feet, 38cm (15ins) high excluding handle. Matthew Dutton and Son are recorded in Baillie G.H. Watchmakers & Clockmakers of the World as working in London 1815-25. Matthew Dutton's father, William (worked 1746-94), was an important maker who in went into partnership with Thomas Mudge at Fleet Street in 1755, later succeeding him in 1771 when Mudge retired from the business to pursue the development of his marine timekeepers (see previous lot). Matthew worked with his father until 1794 then in partnership with his brother, Thomas until 1804, and with his son, also called Matthew from at least 1815 until his death in 1825. The current lot is a textbook example of the fully developed form of 'triple pad top' top table clock made popular by Mudge and Dutton during the third quarter of the 18th century. When compared with the previous lot the subtle evolution of this type of case can be seen; indeed the principal differences are the use of brass fillet mouldings to the dial aperture and full-arch side frets on the current lot opposed to raised mahogany mouldings and break-arch side panels on the previous example. These differences demonstrate how the Dutton workshop introduced subtle updates to their case design, to ensure that their products appeared up to date and 'modern', without compromising the distinctiveness of their product.
Lot 138
An ebony small table timepiece with silent-pull quarter-repeat on two bells... An ebony small table timepiece with silent-pull quarter-repeat on two bells The movement and dial by Benjamin Wright, London, circa 1690, the case later The four finned and knopped pillar movement with verge escapement regulated by short bob pendulum and silent-pull quarter-repeat sounding the hours and quarters on two bells mounted above the plates, the single line-bordered symmetrical foliate scroll and tulip bud engraved backplate signed Benjamin Wright, Londini Fecit to a lambrequin cartouche to centre, the 6.125 inch square gilt brass dial with single winding hole and calendar aperture to the finely matted centre within applied silvered Roman numeral chapter ring with squat stylised fleur-de-lys half hour markers and Arabic five minutes within the narrow outer minute track, with pierced steel hands and winged cherub mask cast brass spandrels to angles with foliate scroll inlaid infill to margins between, now in an ebony veneered case with hinged tied floral bud, bird's head and dolphin cast handle to the domed caddy surmount over ogee cornice top moulding and glazed front door applied with gilt foliate scroll mounts to jambs, the sides with conforming rectangular windows beneath lozenge-shaped foliate scroll pierced sound frets, the rear with further rectangular glazed door set within the frame of the case, the base with shallow moulded skirt over ebonised disc feet, 31cm (12.25ins) high excluding handle. Benjamin Wright is recorded in Loomes, Brian Clockmakers of Britain 1286-1700 as born circa 1664, apprenticed to Abraham Prime in April 1678 and gaining his freedom of the Clockmakers' Company in July 1685. He is believed to have worked from Bell Alley, Coleman Street, London and died before January 1709 when his widow, Mary, is recorded taking George Wright as an apprentice. The current lot is designed to sound the hours and quarters on two bells only on demand. This form of quarter repeat mechanism is thought to have been devised for night-time use in the bedroom; whilst striking clocks with quarter repeat facility were generally intended to be utilised downstairs during the day and upstairs at night. As a consequence 'silent-pull' quarter repeating timepieces are rarer as the original owner have to have been extremely wealthy to afford a timepiece reserved exclusively for use in the bed chamber. The design of the repeat mechanism used in the current lot is essentially based on the system used by Joseph Knibb as described and illustrated in Allix, Charles and Harvey, Laurence HOBSON'S CHOICE pages 36-7.
Lot 149
A rare George II ebonised grande-sonnerie striking table clock The dial... A rare George II ebonised grande-sonnerie striking table clock The dial signed for John Wood, Grantham, mid 18th century The substantial seven knopped and ringed pillar triple chain fusee movement with plates measuring 8.75 by 7.25 inches and chiming the quarters on a nest of six graduated bells followed by full hour strike on a further larger bell every fifteen minutes, with trip quarter repeat, verge escapement regulated by lenticular bob pendulum and backplate engraved with symmetrical foliate scrolls around a vacant matted oval cartouche within herringbone decorated border, the 8 inch brass break-arch dial with shaped false bob and calendar apertures to the matted centre within applied silvered Roman numeral chapter ring with Arabic five minutes to outer track, with pierced steel hands and female mask and scroll cast gilt brass spandrels to angles beneath arch centred with a circular silvered boss with engraved signature John Wood, GRANTHAM flanked by subsidiary Hours/Hours & Quarters/Silent all and Repeat/Silent strike selection dials with applied foliate cast infill mounts to upper margin between, the ebonised case with inverted bell-top superstructure and brass urn and spire finials to the foliate fretwork fronted box upstand over break-arch cornice, plain frieze and glazed dial aperture to the front door, the sides with hinged cast brass handles over slender break-arch windows, the rear with glazed door matching the front set within the frame of the case, on shallow cavetto moulded skirt base incorporating bracket feet, 53.5cm (21ins) high excluding finials. John wood is recorded in Baillie, G. H. Watchmakers & Clockmakers of the World as working in Grantham 1753-97. Grande sonnerie striking table clocks are particularly rare mainly due to the technical challenges of making an hour striking train appropriately geared to sound the hours every fifteen minutes for eight days. Due to the technical skill required such clocks were generally the preserve of the leading London makers such as John Ellicott; with this in mind the movement of the current lot was probably 'bought-in' from one of the leading London workshops - this would certainly account for the matted-over cartouche to the backplate.
Lot 165
A George III mahogany eight-day longcase clock James Wilson, London A George III mahogany eight-day longcase clock James Wilson, London, late 18th century The five pillar rack and bell striking movement with anchor escapement regulated by seconds pendulum, the 12 inch brass break-arch dial with subsidiary seconds and calendar dials and signed James Wilson, WESTMINSTER, London to the silvered centre within applied Roman numeral chapter ring with Arabic five minutes to outer track, with pierced steel hands and rococo scroll cast and pierced spandrels to angles beneath arch centred with subsidiary Strike/Silent selection dial flanked by conforming cast mounts, in a case with break-arch cavetto cornice over brass stop fluted columns flanking the glazed dial aperture, the sides with arched brass fishscale sound frets and quarter columns applied to bargeboards at the rear, the trunk with break-arch door flanked by brass stop fluted quarter columns over raised shaped panel fronted plinth base with moulded double skirt incorporating shaped apron, 225cm (88.5ins) high. James Wilson is recorded in Baillie, G. H. Watchmakers & Clockmakers of the World as gaining his freedom of the Clockmakers' Company in 1781 and working in Westminster, London until 1824.
Lot 70
French Louis XV style gilt brass mounted tortoishell mantel clock The... French Louis XV style gilt brass mounted tortoishell mantel clock The movement by Samuel Marti, Paris, circa 1900 The circular eight-day gong striking movement with anchor escapement regulated by disc-bob pendulum with Brocot type regulation to suspension, the backplate stamped with central Samuel Marti, MEDAILLE D'OR, PARIS 1900 roundel over serial number 163 46 to lower margin, the simulated thirteen piece circular white enamel Roman numeral dial with Arabic five minutes to outer track and steel moon hands within cast brass bevel glazed hinged bezel, the waisted case veneered in mottled red shell and applied with naturalistic rococo scroll cast surmount to the cavetto upstand over conforming crest and foliate borders to fascia, the rear with shaped door within an ebonised surround, on shouldered scroll feet with applied apron mount cast as a laurel branch between, 37cm (14.5ins) high.
Lot 71
A French Louis XV style gilt brass mounted 'vernis martin A French Louis XV style gilt brass mounted 'vernis martin' decorated mantel clock, Unsigned, late 19th century The circular eight-day gong striking movement with anchor escapement regulated by disc-bob pendulum with Brocot type regulation to suspension and backplate stamped with serial number 652 46(?) to lower margin, the simulated thirteen piece circular white enamel Roman numeral dial with Arabic five minutes to outer track and steel trident shaped hands within laurel cast brass bevel glazed hinged bezel, the waisted deep olive green painted case applied with naturalistic rococo scroll cast surmount to the floral spray polychrome painted cavetto upstand over conforming cast crest and draped flowering foliage over dial, the apron further painted with a gentleman in 18th century dress tending flowers with a watering can, the rear with shaped door within a conforming green ground, on rococo scroll cast feet with applied apron mount between, 31cm (12.25ins) high.
Lot 147
A George II walnut quarter-chiming eight-day longcase clock John Richardson A George II walnut quarter-chiming eight-day longcase clock John Richardson, London, circa 1740 The five finned pillar triple train movement with anchor escapement, chiming the quarters on a graduated nest of six bells and striking the hour on a single larger bell, the 12 inch brass herringbone border engraved break-arch dial with rosette decorated recessed scallop-edged subsidiary seconds dial, calendar aperture and ringed winding holes to the matted centre within applied silvered Roman numeral chapter ring with Arabic five minutes to outer track, with pierced steel hands and female mask and scroll cast spandrels to angles beneath subsidiary Strike/Silent selection dial flanked by conforming mounts to arch within generous applied silvered name plate inscribed John Richardson, London forming the upper margin of the arch and continuing down to contact with the chapter ring beneath, in a case with architectural cornice above break-arch frieze and generous three quarter columns applied to the glazed hood door, the sides with break-arch apertures and conforming quarter columns set against bargeboards at the rear, the trunk with break-arch door veneered with three pairs of book-matched panels within a herringbone bordered crossbanded surround, on conforming cavetto moulded plinth base with moulded skirt, 234cm (92ins) high. John Richardson is recorded in Baillie, G. H. Watchmakers & Clockmakers of the World as apprenticed in 1731 and gaining his freedom of the Clockmakers' Company in 1738. His workshop was based at Bell Yard, London and he is presumed to have worked until his death in 1774
Lot 163
A George III mahogany table clock with pull-quarter repeat on six bells... A George III mahogany table clock with pull-quarter repeat on six bells William Glover, Worcester, circa 1780 The five pillar twin fusee bell striking movement with pull-quarter repeat sounding on a graduated nest of six bells and verge escapement regulated by lenticular bob pendulum with pivoted rise/fall regulation to suspension, the backplate engraved with intense symmetrical foliate strapwork, the 7 inch brass break-arch dial with shaped false bob and calendar apertures to the Ho-Ho bird and oriental mask inhabited rococo scroll engraved centre within applied silvered Roman numeral chapter ring with Arabic five minutes to outer track, with pierced blued steel hands and applied rococo scroll cast spandrels to angles beneath twin subsidiary Strike/Silent selection and regulation dials set within a foliate scroll engraved field and incorporating a recessed shaped signature plate engraved William Glover, Worcester to arch, the bell top case with hinged brass carrying handle and four pineapple finials to superstructure over front door with brass fillet inset glazed dial aperture and scroll pierced upper quadrant frets, the sides with full-height arched glazed apertures and the rear with conforming break-arch glazed rectangular door incorporating further upper quadrant frets and set within the frame of the case, on cavetto moulded skirt base with brass bracket feet, 44.5 (17.5ins) high excluding handle. A William Glover is recorded in Baillie, G. H. Watchmakers & Clockmakers of the World as working in Worcester from 1751 until his retirement in 1758. Another with the same name (believed to be a nephew) is also recorded as coming from London to Worcester in 1758; he opened a shop in Tewkesbury in 1764 and worked until at least 1767. Finally Baillie also notes a third record of a William Glover Working in Worcester 1764-71 who also opened a shop in Tetbury in 1764, it is possible that this is a record of the same nephew. The current lot is very much in the London style but with perhaps a little more engraved decoration than would normally be found on a London clock - this is perhaps to be expected for a clock made in the provinces by a maker trained in the capital.
Lot 173
A George III mahogany eight-day longcase clock Samuel Atkins, London A George III mahogany eight-day longcase clock Samuel Atkins, London, circa 1765 The five pillar rack and bell striking movement with anchor escapement regulated by seconds pendulum, the 12 inch brass break-arch dial with subsidiary seconds dial, calendar aperture and oval signature plate engraved Sam'l Atkins, London to the matted centre within applied Roman numeral chapter ring with Arabic five minutes to outer track, with pierced steel hands and rococo scroll cast and pierced spandrels to angles beneath arch centred with subsidiary Strike/Silent selection dial flanked by dolphin cast mounts, the case of fine colour with concave sided 'pagoda' pediment fronted with fine rococo scroll cast brass fret over break-arch cavetto cornice and brass stop fluted columns flanking the glazed dial aperture, the sides with arched brass fishscale sound frets and quarter columns applied to bargeboards at the rear, the trunk with break-arch door over raised panel fronted plinth base with moulded double skirt and squab feet, 243cm (95.5ins) high. Provenance: Formerly the property of William Francis Clarke, Commanding Officer of Naval Intelligence during WWII, Hut 4, Bletchley Park; thence by direct descent to the vendor. Samuel Atkins is recorded in Baillie, G. H. Watchmakers & Clockmakers of the World as an 'eminent' maker born in 1697 and working from Temple Bar until his death in 1768. The current lot is a fine original unrestored 'textbook' example of a London mahogany pagoda-cased longcase clock which retains fine colour and surface to the case.
Lot 116
A French Louis XV style brass mounted Boulle bracket clock Retailed by Black A French Louis XV style brass mounted Boulle bracket clock Retailed by Black, Starr and Frost, New York, late 19th century The rectangular eight-day movement with Brocot type pendulum regulation, outside countwheel hour and half-hour strike on a coiled gong and stamped with serial number 2535, 77 to backplate, the 5.5 inch circular twelve-piece cartouche numeral dial with symmetrical strapwork scroll cast centre within chapter ring with blue-on-white Roman hour numerals within rococo borders and Arabic five minutes to outer track, the lower margin of the dial backing plate engraved with retailer's signature BLACK. STARR & FROST. NEW YORK., the engraved cut brass and brown shell marquetry decorated case with cast trumpeting cupid surmount to the concave-sided superstructure veneered with leafy scroll decoration and applied with foliate pendant mounts to angles over leaf cast arched cornice centred with a Satyr mask and terminating with scrolls, the front with brass-framed arched glazed door enclosing marquetry decorated floor and back panel to interior and incorporating cast panel featuring a pair of putti in allegorical dress to apron, the surround decorated with leafy scrolls within panel borders, the sides with rectangular windows within leaf cast surrounds over swollen base sections, on scroll cast feet with leafy apron between, 60cm (23.5ins) high. The New York jewellers Black, Starr and Frost can trace their routes back to the firm of Marquand and Paulding established in Savannah, Georgia in 1801. Isaac Marquand moved to New York in 1810 and the business developed throughout the 19th century with evolution of owners changing the name to Ball, Black and Company. The incorporation of new partners Courtland Starr and Aaron Frost in 1876 resulted in the firm becoming Black, Starr and Frost. This partnership continued until around 1929 when Gorham and Company were incorporated into the firm changing the name to Black, Starr an Frost-Gorham Incorporated.
Lot 81
A rosewood grande sonnerie striking 'Vienna' wall regulator Unsigned A rosewood grande sonnerie striking 'Vienna' wall regulator Unsigned, mid to late 19th century The triple train weight-driven movement striking the hour with every quarter on a pair of graduated gongs, the going train with deadbeat escapement regulated by wood rod pendulum with large brass lenticular bob, the two-piece white enamel Roman numeral dial with pierced steel hands and moulded brass bezel, the case with elaborate break-arch pediment applied with urn finials and turned rosette to frieze over full-height arch glazed door flanked by corbels and short spiral twist columns to the canted moulded uprights, the sides with tall rectangular windows, the base with inverted bell-shaped caddy with pendant finial, 129cm (51ins) high.
Lot 151
A William III ebonised thirty-hour longcase clock case Unsigned A William III ebonised thirty-hour longcase clock case Unsigned, late 17th century The later hood with cavetto cornice over square glazed aperture for a 7.5inch dial and conforming rectangular side windows, the trunk with convex throat over 41.5ins slender rectangular door centred with a lenticle and applied with two vertical raised panels, on moulded plinth base with complex skirt, 197cm (77.5ins) high.
Lot 161
A George III mahogany longcase regulator William Hewlett, Bristol A George III mahogany longcase regulator William Hewlett, Bristol, circa 1785 The four pillar eight-day single train movement with bolt-and-shutter maintaining power and deadbeat escapement regulated by seconds pendulum with heavy lenticular bob, the 12 inch square silvered brass dial with shuttered winding hole and signed William Hewlett, Bristol to centre beneath brass ring bordered panel incorporating sector with Roman numerals for the hours within outer sweep Arabic five minute track, the case with swan neck pediment superstructure over moulded cornice, plain frieze and glazed hinged dial aperture flanked by columns with brass caps and bases, the trunk with concave throat moulding over caddy moulded rectangular door, on plain plinth base with bracket feet, (movement with possible alteration), 209cm (82.25ins) high excluding later finial. William Hewlett is recorded in Moore, A.J. The Clockmakers of Bristol 1650-1900 as working in Bristol circa 1775-97. Evidence in the movement plates would suggest that the current lot was originally made with a subsidiary seconds dial positioned within the area now occupied by the brass ring enclosing the hour sector. This possibility is further supported by the fact that the hour sector is cut into a separate circular plate inserted into an aperture in the dial with the brass ring serving to conceal the join. Interestingly the hour disc (fitted behind the sector aperture) is made form a piece of recycled brass as the rear is engraved with a lantern clock dial centre signed for John Culliford of Bristol. The fact that the current lot was originally made to display minutes and seconds only would suggest that it served to test the timekeeping of watches, hence was probably made as the 'shop regulator' for Hewlett's own use. The conversion to show hours was probably done early in its life to make it more appropriate for subsequent usage.
Lot 164
A George III mahogany eight-day longcase clock Samuel Bradley, Worcester A George III mahogany eight-day longcase clock Samuel Bradley, Worcester, circa 1770 The five pillar rack and bell striking movement with anchor escapement regulated by seconds pendulum, the 12 inch brass break-arch dial with subsidiary seconds dial, calendar aperture and signed SAM'L BRADLEY, WORCESTER to a shaped silver plaque to the matted centre within applied Roman numeral chapter ring with Arabic five minutes to outer track, with pierced steel hands and twin bird and urn foliate cast spandrels to angles beneath arch centred with subsidiary STRIKE/SILENT selection dial flanked by dolphin cast mounts, in a case with open centred break-arch cavetto cornice incorporating scroll cartouche to apex and foliate scroll pierced blind fret frieze over fluted columns flanking the glazed dial aperture, the plain sides with half columns applied to the rear, the trunk with break-arch caddy moulded crossbanded door flanked by fluted quarter columns over raised shaped panel fronted plinth base with fluted canted angles and moulded shallow skirt incorporating reduced ogee bracket feet, 223.5cm (88ins) high. Samuel Bradley is recorded in Baillie, G. H. Watchmakers & Clockmakers of the World as working in Worcester from 1744 until his death in 1783.
Lot 175
A fine George III ºngo' cased black chinoiserie japanned tavern timepiece... A fine George III ºngo' cased black chinoiserie japanned tavern timepiece John Rayment, Huntingdon, circa 1785 The substantial six pillar eight-day movement with high pinion count to the five-wheel train and anchor escapement regulated by seconds pendulum, the 17 inch circular gilt on black Roman numeral dial with Arabic five minutes to outer track and decorative pierced gilt brass hands set behind substantial hinged glazed wooden ogee moulded bezel within caddy moulded border to the dial panel behind, the teardrop shaped drop-trunk case signed in gilt John Rayment Huntingtdon in a curve to throat above concave-topped baluster outline lift-out door finely decorated in raised polychrome and gilt with figures and oriental pavilions including a female in European dress within double line border and continuous gilt scroll band painted surround, the sides with movement access panels above large stylised floral spray decoration, the base with ogee moulded canted foot decorated with further large scale foliate motif to front, 140cm (55ins) high. Provenance: George Fludyer, (d.1837) and by descent through the Fludyer Family, finally to Sir Arthur John Fludyer, 5 th and last baronet, who died childless in 1922. Then to his sister Katherine who married Henry Randolph Finch of the Croft, Manton, second son of George Finch, Burley-on-the-Hill, Rutland and by descent. The Finch Family had the title of the The Earls of Winchelsea and Nottingham Burley-on-the-Hill. John Rayment is recorded in Baillie, G. H. Watchmakers & Clockmakers of the World as working in Huntingdon 1751-95. The current lot is unusual in having a wooden glazed bezel which would suggest that the owner sought to ensure that the hands could not be tampered with when in use. From this it may be appropriate to speculate that the timepiece could have been supplied for use in the servants hall of a large country house rather than in a tavern or other public place. This possibility is supported by the continuous single-family provenance which is also perhaps the principal reason why the timepiece has survived in fine original unrestored condition.
Lot 137
A fine William III ebonised eight-day longcase clock with one-and-a-quarter... A fine William III ebonised eight-day longcase clock with one-and-a-quarter seconds period pendulum Abraham Farrer, Pontefract, circa 1695 The four finned pillar inside countwheel bell striking movement with anchor escapement regulated by one-and-a-quarter seconds pendulum, the 11 inch square brass dial with ringed winding holes, subsidiary seconds dial and scroll border engraved calendar aperture to the rose motif decorated matted centre within applied silvered Roman numeral chapter ring with stylised sword hilt hour markers and Arabic five minutes to outer track, with fine pierced steel hands and winged cherub mask and leafy cast spandrels to angles with generous foliate scroll engraved infill to upper and side margins over signature Abraham Farrer Pontefract to lower border, the ebonised case with twin cherub and crown centred scroll carved crest over complex moulded cornice and three-quarter columns applied to the glazed hood door, the sides with rectangular windows and conforming quarter columns applied to bargeboards at the rear, the trunk with convex throat moulding over 41.5inch rectangular door, the plinth base incorporating hinged front panel to reveal the pendulum bob, on bun feet, (some restoration), 212cm (83.5ins) high. Little is known of the life of Abraham Farrer although a maker with this name is recorded in Loomes, Brian Clockmakers of Britain 1286-1700 as having a son, also named Abraham, in 1728. Loomes also cites the records of two deaths - one in 1740, the other in 1752/3, it would perhaps be appropriate to speculate that these refer to the passing of father and son respectively. The movement of the current lot can be described as being very much in the London style and demonstrates a high quality and skilled approach both in its finish and specification. The provision of a one-and-a-quarter seconds pendulum is extremely rare for a provincial longcase however another clock (of month duration) by Farrer with this feature is described in Edwardes, Ernest THE GRANDFATHER CLOCK pages 226-7 with the dial illustrated as Plate 19.
Lot 152
An ebonised miniature thirty-hour longcase timepiece with alarm The movement... An ebonised miniature thirty-hour longcase timepiece with alarm The movement and dial by Conyers Dunlop, London, circa 1740 The posted single-handed movement with verge escapement regulated by short bob pendulum swinging to the rear of the clock and alarm set within the frame behind the going train, the 5 inch brass break-arch dial with alarm disc and pierced steel hand to the matted centre within applied silvered Roman numeral chapter ring and rococo scroll cast spandrels to angles beneath circular boss signed Conyers Dunlop, London flanked by conforming mounts to arch, with domed bell bearer behind, in an ebonised case with ball and spire finial to the shallow domed caddy superstructure over ogee moulded cornice, scroll cast brass infill mounts and break-arch glazed door to hood, the trunk with concave throat moulding over slender caddy moulded rectangular door and ogee moulded plinth base with applied skirt, (case with restoration), 193cm (76ins) high excluding finial; 206cm (81ins) high overall. Conyers Dunlop, the son of renowned clockmaker Andrew Dunlop, is recorded in Baillie. G.H. Watchmakers & Clockmakers of the World as apprenticed in 1725 gaining his freedom of the Clockmaker's Company in 1733; he was appointed Master in 1758 and died in 1779.
Loading...-
235302 item(s)/page