186049 Preisdatenbank Los(e) gefunden, die Ihrer Suche entsprechen

Verfeinern Sie Ihre Suche

Jahr

Sortieren nach Preisklasse
  • Liste
  • Galerie
  • 186049 Los(e)
    /Seite

Los 2225

oblong, the hinged cover engine-turned centring a vacant cartouche and with a foliage and flower cast border, the sides and base further engine-turned 86mm wide, 4oz 8dwt, 137grProvenance: Thomas Watson, 16 August 2016, lot 301.Fully marked inside base and part marked inside cover. The marks are generally clear. There is some overall surface scratching and wear, consistent with age and use. The wear is noticeable as a softening to the engine-turning. There has been a repair and applied patch to the front and one corner of the cover.

Los 2229

with an engine-turned finish and suspension loop; TOGETHER WITH: a brass pencil-lead holderthe propelling pencil 14cm extended, 6.2cm closedThe propelling pencil: fully marked on handle and part marked on suspension ring. Further stamped 'S. Mordan & Co'. The marks are generally clear. There is some minor surface scratching and wear, consistent with age and use. The propelling mechanism functions properly. The pencil currently does not have a lead and so it has not been tested to see if it writes correctly. The nib stamped 'VS'. Total gross weight of pencil 18gr.The pencil-lead holder: there are some surface scratches and wear, consistent with age and use.

Los 2232

oblong, the hinged cover set with a glazed watercolour painting of flowers, signed indistinctly, the sides engine-turned96mm wideFully marked on bezel and part marked inside cover with English import marks. Engraved inside the cover 'Boucheron Paris - Londres'. There is some surface scratching and wear to the silver. The watercolour is perhaps somewhat faded. The gross weight is 158gr.

Los 2267

oblong and with an arched top, the front engine-turned on four stepped block feet, the mother-of-pearl dial with Arabic numerals, with hinged cover on the back12cm wideFully marked on side and further part marked on cover bezel. The maker's mark on the side is only just visible. The other marks are legible. There is some overall surface scratching and wear, consistent with age and use. The wear is noticeable as a softening to the engine-turning. The dial with some scratches. The movement plates are dirty and need cleaning. The movement is winding smoothly and in going order.

Los 2272

shaped circular and on three panel feet, overall engine-turned and later engraved with an initial25cm diameter, 13oz 3dwt, 408grFully marked underneath. There is some wear to the marks but they are in general just legible. There is some overall surface scratching and wear, consistent with age and use. There are some bruises and the centre is slightly thin where it may have been erased.

Los 2278

each piece with engine-turned decoration, engraved with an initial, comprising: an oblong timepiece, probably by Chares and Richard Comyns; five cylindrical jars with pull-off covers; an oval jar with pull-off cover; two cylindrical jars with screw cover; two oblong scent-bottles with screw covers; a spirit flask, the base with detachable cup; an associated silver-mounted faux tortoiseshell comb; a pair of faux tortoiseshell hair-brushes; a pair of faux tortoiseshell clothes brushes; a faux tortoiseshell hand-mirror; a faux tortoiseshell shoe-horn and various faux crocodile boxes and pouches, one containing various implements, mostly fitted in faux crocodile case with outer cloth coverthe case 56cm wide

Los 2341

key wound single fusee lever movement signed and numbered 33649, split bimetallic balance, diamond endstone, dust cover, gold coloured dial with Roman numerals, seconds dial, engine turned case back and a floral engraved band, maker's mark HS and numbered 33649, Chester hallmark for 185348mm wideCase with surface scratches, dial with scratches, hand setting correctly and winding smoothly, balance is swinging slowly, movement in going order. Total watch weight 102.2g.

Los 2368

(calibre 633) lever movement signed, silvered engine turned dial with Roman and dagger markers, date aperture at 6, glazed back cover secured by eight screws, Oris strap and steel buckle, with Oris boxes and guarantee booklet39mm wideCase with surface scratches, bezel and lugs with minor dents, strap with wear in parts, dial is clean, hand setting correctly, date is changing correctly, movement in going order.

Los 2371

single fusee lever movement signed and numbered 65861, split bimetallic balance, enamel dial with Roman numerals, seconds dial, case with London hallmark for 185550mm wideCase with surface scratches and small dents in parts, both cover with rubbing to the engine turning, dial is clean, hand setting correctly and winding smoothly, movement in going order. Total watch weight 93.5g.

Los 2373

lever movement, quarter repeating with hammer on two outer steel gongs, enamel dial with Roman numerals, seconds dial, case with push repeat button at 6, covers with engine turned decoration, case numbered 8712852mm wideCase with surface scratches, case with minor dents in parts, case is slightly dirty in parts, plexi glass with small scratches, dial with minor scratches, hand setting correctly and winding smoothly, repeat is working, movement in going order.

Los 665

A Brass Strike and Repeat Carriage Clock, Brunelot, circa 1890, carrying handle and repeat button, enamel dial with Roman numerals and an engine turned dial mask surround, twin barrel movement with a silvered platform lever escapement and striking on a gong, movement backplate stamped B for Brunelot, 18cm high over handleBrass surfaces are slightly discoloured, glass panels are clean, enamel dial is clean, movement needs cleaning, platform escapement is discoloured.

Los 513

BSA D7 Bantam Super 175cc motorcycle. Registration 290 PBJ. Showing 3,133 miles. Purchased new by the Vendor on 18th December 1962, this very original example boasts the optional extras of leg shields and chrome plated petrol tank. Having been dry stored for many years, it now requires re-commissioning; currently not running but engine turns over. Offered for sale with original handbook and bill of sale from Earle & Kent Ltd, Chantry Garage, Saxmundham, Suffolk. Although no registration paperwork is included, the bike does have an original tax disc. A rare opportunity to acquire a very local, one owner motorcycle. This lot is subject to a Buyers Premium of 10% + VAT.

Los 514

Honda ‘Cub’ C70 72cc motorcycle. Registration SBJ 794W. Date of first registration 24/03/1981. Showing 7,751 miles. Frame number 7066640. Purchased new by the Vendor on 6th June 1981 from main dealer Davey Bros & Co of Foxhall Road, Ipswich. Having been dry stored for many years, it now requires re-commissioning; currently not running but engine turns over. Offered for sale with older style V5 and original owners handbook. An excellent opportunity to acquire a very original, one owner example of this highly collectable motorcycle. This lot is subject to a Buyers Premium of 10% + VAT.

Los 515

Triumph 650cc motorcycle. Registration TSL 840 (no paperwork). Date of first registration 09/02/1934. Engine number 6T 48631. Gearbox number 1768VA. Direct from a local deceased estate, this motorcycle has a 1934 frame, fitted with a later Thunderbird 650cc 6T engine and early (possibly 1927) square fuel tank. This lot is subject to a Buyers Premium of 10% + VAT.

Los 635

A small open crank stationary engine on cast iron base with generator

Los 75

A 1955 Hillman Owners handbook, a handbook on Perkins Diesel engine, a Lister instruction book, A Ransoms T.I.M. beet harvester coaster and a plaque for telephone sets "F.M.K.1"

Los 757

Englisches Allchin-Schaustellerfahrzeug mit Dampfantrieb, 1968Hersteller: Maxwell Hemmens, Engineers, Thorganby, York. Kohlebefeuerter Dampftraktor mit Dynamo, umsteuerbar, 2-Gang-Getriebe, lenkbare Vorderachse (über Ketten), Feststellbremse, Manometer, elektrische Beleuchtung, Seilwinde, Dach über die gesamte Länge, aufstellbarer Kamin, feststehender Zylinder Ø 32 mm, Kessel Ø 70 mm, Schwungrad Ø 115 mm, Gesamtmaße: 555 x 200 x 400 mm. Komplett mit allen Armaturen. Unbefeuerter Neuzustand! Ein großartiges Modell von höchster Qualität. Start Price: EUR 1800 Zustand: (2/-)Live-Steam Coal-Fired Model of an Allchin Showman's Traction Engine, 1968Maxwell Hemmens, Engineers, Thorganby, York. Reversible, 2 gears, steerable front axle with chains, parking brake, manometer, electric lighting, rope winch, full-length canopy, extension chimney, fixed cylinder Ø 1 1/4 in., boiler Ø 2 3/4 in., flywheel Ø 4 1/2 in., overall size: 21 7/8 x 7 7/8 x 15 3/4 in., complete with all fittings. In near-mint unfired condition. A fascinating model of first-class engineering quality. Start Price: EUR 1800 Condition: (2/-)

Los 788

Dreizylinder-Schiffs-Verbunddampfmaschine, um 1960Funktionsmodell aus Messing, poliertem Stahl und Gußmetall, mit Hoch-, Mittel- und Niederdruck-Zylindern, Ø 6,3, 5,1 und 3,9 cm, Laufrichtung umsteuerbar, Kulissensteuerung mit Exzenterring und Rückwärtsexzenter, Kreuzkopfführung, Kondensor, Speisepumpe, Schiffsschraube am Ende der Kurbelwelle, Höhe 28 cm, etwas verharzt, auf Holzbrett, 39 x 29 cm. Start Price: EUR 1200 Zustand: (2/3)Precision Model of a Triple-Expansion Compound Marine Steam Engine, c. 1960Brass, polished steel and cast metal, cylinders Ø 2 1/2, 2 and 1 ½ in., with reversible direction of rotation, sliding control with eccentric ring and reverse eccentric, crosshead guide, condenser, feed pump, ship screw at outer end of the crankshaft., ht. 11 in., somewhat resinous, on wood base, 15 3/5 x 11 2/5 in. Start Price: EUR 1200 Condition: (2/3)

Los 798

Liegender wassergekühlter Einzylinder-BenzinmotorEngland, schwarz emailliertes Gußeisengehäuse, kreuzkopfgeführte Kolbenstange auf die Kurbelwelle mit 2 Schwungrädern Ø 16,5 cm, Glühkerze CM-6, 3 Mes­singöler, auf Holzplatte, 33 x 17,5 x 20,5 cm. Start Price: EUR 240 Zustand: (2-3/-)Horizontal Single-Cylinder Water-Cooled Gasoline EngineEngland, black-enameled cast-iron housing, crosshead-guided piston rod to the crankshaft with two 6 ½-inch flywheels, glow plug CM-6, 3 brass oilers, on wood board, 13 x 7 x 8 in. Start Price: EUR 240 Condition: (2-3/-)

Los 800

Liegender wassergekühlter Einzylinder-BenzinmotorVermutlich England, Stahl, Gußmetall und Messing, kreuzkopfgeführte Kolbenstange auf die Kurbelwelle mit 11cm-Schwungrad, Glühkerze KLG Mini 1, Ölpumpe, auf Holzplatte, 30 x 18 cm. Start Price: EUR 240 Zustand: (2-3/-)Horizontal Single-Cylinder Water-Cooled Gasoline EngineProbably England, steel, cast iron and brass, crosshead-guided piston rod to the crankshaft with 4 1/3-inch flywheel, glow plug KLG Mini 1, oil pump, on wood board, 11 ¾ x 7 in. Start Price: EUR 240 Condition: (2-3/-)

Los 743

2 Dampfmaschinen-Funktionsmodelle, um 1970Hergestellt aus Messing, Gußmetall und Stahl. 1) Liegende Einzylinder-Dampfmaschine, teilweise grün lackiert, mahagonibeplankter doppeltwirkender Zylinder, Ø 4,5 cm, Schwungrad Ø 17,5 cm, auf seitlichen Schienen gleitender Kreuzkopf, Exzenter mit Stange zur Schiebersteuerung, Gesamtmaße 32 x 18 x 19 cm, etwas schwergängig. - Und: 2) Stehende Einzylinder-Dampfmaschine, teilweise grün lackiert, doppeltwirkender Zylinder, Ø 4 cm, Schwungrad Ø 11 cm, Höhe 22 cm, funktioniert. Start Price: EUR 180 Zustand: (3+/-)2 Steam Engine Working Models, c. 1970Brass, cast metal and steel. 1) Horizontal single-cylinder steam engine, partially finished in green, 1 3/4-inch lagged brass-bound mahogany double-action cylinder, flywheel Ø 6 4/5 in., crosshead guide power transmission to the crankshaft, eccentric rod slide-valve control, overall dimensions 12 ½ x 7 x 7 1/2 in., somewhat stiff. - And: 2) Vertical single-cylinder steam engine, partially finished in green, reversible, double-action cylinder, Ø 1 ½ in., flywheel Ø 4 1/3 in., height 8 3/4 in., works. Start Price: EUR 180 Condition: (3+/-)

Los 756

Dampfwagen Clayton Undertype mitAnhänger im Maßstab 1:6Kabine mit vertikalem, kohlebefeuertem Stahlkessel, mit Wasserstandglas, Manometer, Sicherheitsventilen, Dampfpfeife, Schornstein, Handschalthebel, Lenkrad und Flügeltüren, montierter Wassertank hinter der Kabine, Fahrgestell auf Blattfedern und 4 Speichenrädern mit Vollgummireifen, Vorderräder über Ackerman-Gestänge lenkbar, großer Zweizylindermotor mit Kettenantrieb auf die Hinterräder, Anhänger mit Sitzpolster, von hier aus kann das Fahrzeug gelenkt werden, Länge: Zugmaschine 82 cm, Anhänger 84 cm. Start Price: EUR 1800 Zustand: (2-/-)2-Inch Scale Model of a Clayton Undertype Steam Wagon with TrailerCab with vertical coal-fired steel boiler with water glass, pressure gauge, safety valves, steam whistle and chimney, large twin-cylinder engine with chain-drive to rear wheels, hand-operated gear lever, steering wheel and hinged doors, the rear with mounted water tank, chassis with leaf springs and 4 spoked wheels with solid rubber tyres, the front wheels steered via Ackerman linkage, trailer with seat cushion, suitable for driving the truck, tractor unit 32 in., trailer 33 in. Start Price: EUR 1800 Condition: (2-/-)

Los 741

Modell einer liegenden Kolbendampfmaschine, um 1900Hergestellt aus Stahl, Gußeisen und Messing, Zylinder Ø 7,5 cm, Kreuzkopfführung in seitlichen Gleitlagern, Steuerung mit Exzenterring, Kurbelwelle mit 3 Ölbehältern, Speichen-Schwungrad Ø 22 cm, auf Gußsockel und Holzbrett, 51 x 22,5 cm. Start Price: EUR 240 Zustand: (3/2-3)Model of a Live Steam Horizontal Mill Engine, c. 1900Steel, brass and cast metal, 3-inch cylinder, crosshead guide in lateral bearings, sliding valve control with eccentric ring, crankshaft with 3 oilers, spoked 8 3/4-inch flywheel, on cast-iron base and wood plinth, 20 x 8 4/5 in. Start Price: EUR 240 Condition: (3/2-3)

Los 794

Modell einer liegenden Einzylinder-Dampfmaschine im Maßstab 1:12, 1960England, Konstruktion aus poliertem Stahl, Gußmetall und Messing, teilweise grün lackiert, mit Mahagoni beplankter Zylinder Ø 5,5 cm, Schiebersteuerung mit Exzenter, Schwungrad mit Speichen Ø 11,5 cm, montiert auf Gußsockel und Holzfundament mit Fliesen, Gesamtmaße 43 x 22 x 24 cm, funktioniert. - Das Modell wurde 1960 von A.H. Clarke, Birmingham, hergestellt, mit 2 Plaketten der Midland Model Engineering & Hobbies Exhibition, 1982 und 1983. Start Price: EUR 350 Zustand: (2-3/2)1-Inch Scale Working Model of a Horizontal Single-Cylinder Steam Engine, 1960England, polished-steel, cast-iron and brass construction, partially green-lacquered, brass-bound mahogany-lagged cylinder Ø 2 1/5 in., slide valve control with excentric ring, spoked flywheel Ø 4 1/2 in., on cast-iron base and wood plinth with tiles, overall dimensions 17 x 8 ¾ x 9 1/2 in., working condition. - Built by A.H. Clarke, Birmingham in 1960, with 2 plaques from the Midland Model Engineering & Hobbies Exhibition, 1982 and 1983. Start Price: EUR 350 Condition: (2-3/2)

Los 748

Liegende Einzylinder-Dampfmaschine, um 1970Hergestellt aus Messing, Gußmetall und Stahl, Stahlzylinder, Ø 6 cm, Schwungrad Ø 17 cm, auf seitlichen Schienen gleitender Kreuzkopf, Steuerung mit Exzenterring, Speisepumpe, auf Gußfundament und Holzsockel, Gesamtmaße 43 x 14 x 23 cm, etwas verharzt. Start Price: EUR 240 Zustand: (3/-)Horizontal Single-Cylinder Steam Engine, c. 1970Brass, cast metal and steel, 2 1/3-inch steel double-action cylinder, flywheel Ø 6 3/4 in., crosshead guide power transmission to the crankshaft, sliding control with eccentric ring, feed pump, on cast-iron base and wood plinth, overall dimensions 17 x 5 ½ x 9 in., somewhat resinous. Start Price: EUR 240 Condition: (3/-)

Los 733

Schautafel mit Ersatzteilen von Dampf­maschinen, um 1980Steam Age, ca. 150 Teile, mit Absperrhähnen, Dreiwege-Verbindungen, Manometern, Dampfpfeifen, Ölpumpen, Wasserstandgläsern, Speisepumpen und vielen weiteren Teilen, zu Wandmontage, Maße 50 x 100 cm. Start Price: EUR 280 Zustand: (2/-)Display of Steam Engine Components, c. 1980"Steam Age", approx. 150 parts, with stopcocks, three-way connections, manometers, steam whistles, oil pumps, water level glasses, feed pumps and many other parts, for wall-mounting, dimensions 19 5/8 x 37 1/3 in. Start Price: EUR 280 Condition: (2/-)

Los 780

Funktionsmodell einer 6-Säulen-Balancier­dampfmaschine "Lady Stephanie", um 1985Mit Herstellerplakette "Kølsen Maskiner, Danmark, No. 051", 6 Messingsäulen, obenliegender Laufbalken, parallellaufende Bewegung, holzbeplankter Zylinder, Ø 2,6 cm, Schwungrad mit Speichen Ø 14 cm, funktionierender Geschwindigkeitsregler, hergestellt aus Messing, Stahl und Gußeisen, auf Messingsockel montiert, Gesamtmaße 29 x 13 x 20 cm, funktioniert etwas schwergängig. Start Price: EUR 450 Zustand: (2/3)Live-Steam Model of a 6-Column Beam Engine "Lady Stephanie", c. 1985With maker's plaque "Kølsen Maskiner, Danmark, No. 051", brass, steel and cast iron, 6 brass pillars supporting an overhead walking beam with parallel motion, wood-lagged single-cylinder, Ø 1 in., spoked 5 1/2 in. flywheel, governor not working, on brass base, overall size 11 2/5 x 5 x 7 4/5 in., working somewhat stiff. Start Price: EUR 450 Condition: (2/3)

Los 781

Funktionsmodell einer 6-Säulen-Balancier­dampfmaschine, um 1985England, komplett aus Messing, obenliegender Laufbalken, parallellaufende Bewegung, Zylinder, Ø 3,5 cm, Schwungrad mit Speichen Ø 14 cm, Geschwindigkeitsregler, auf Mahagonisockel montiert, Gesamtmaße 32 x 20 x 21 cm, etwas verharzt. - Ein sehr interessantes und dekoratives Modell. Start Price: EUR 600 Zustand: (2/3)Live-Steam Model of a 6-Column Beam Engine, c. 1985England, all-brass construction, with 6 pillars supporting an overhead walking beam with parallel motion, single-cylinder, Ø 1 1/3 in., spoked 5 1/2 in. flywheel, with governor, on mahogany base, overall size 12 ½ x 7 4/5 x 8 ¼ in., somewhat resinous. - A very interesting and decorative model. Start Price: EUR 600 Condition: (2/3)

Los 755

Dreizylinder-Schiffs-Verbunddampfmaschine, um 1950Funktionsmodell aus Messing, poliertem Stahl und Gußmetall, mit Hoch-, Mittel- und Niederdruck-Zylindern, Ø 5,5, 4,4 und 3,3 cm, Laufrichtung umsteuerbar, Kulissensteuerung mit Exzenterring und Rückwärtsexzenter, Kreuzkopfführung, Kurbelwelle mit Gegengewichten, Schwungrad Ø 5,6 cm, Höhe 18 cm, etwas verharzt. Start Price: EUR 450 Zustand: (2-3/3)Precision Model of a Triple-Expansion Compound Marine Steam Engine, c. 1950Brass, polished steel and cast metal, cylinders Ø 2 1/8, 1 ¾ and 1 1/4 in., with reversible direction of rotation, sliding control with eccentric ring and reverse eccentric, crosshead guide, crankshaft with counterweights, flywheel Ø 2 1/5 in., ht. 7 in., somewhat resinous. Start Price: EUR 450 Condition: (2-3/3)

Los 773

Zweizylinder-Dampfmaschinen-Anlage mit Dynamo, um 19602 nebeneinanderliegende Zylinder, Ø jeweils 3 cm, Kreuzkopfführung in Gleitlagern, umsteuerbar, Kulissensteuerung mit Exzenterring und Rückwärtsexzenter, funktionierender Geschwindigkeitsregler, liegender Kessel, mit Holz ummantelt, Ø 13,5 cm, Gasbrenner, Manometer, Wasserstandglas, Wasserbehälter, Speisepumpe, Schwungrad Ø 12,5 cm, 4-Volt-Dynamo, Antrieb über Kette und Treibriemen, Dach mit 6 Lampen, Transmission mit 6 Riemenscheiben, auf Metallsockel, 48 x 36 cm. Start Price: EUR 400 Zustand: (3+/-)2 Cylinder Steam Engine Plant with Dynamo, c. 1960Two side-by-side 1 1/5 in. cylinders, crosshead guide in plane bearings, with reversible direction of rotation, sliding control with eccentric ring and reverse eccentric, working governor, horizontal wood-lagged boiler, Ø 5 ¼ in., gas firing, manometer, water gauge level, water container, feed pump, spoked flywheel Ø 5 in., 4-volt dynamo, driven by chain and belt, roof with 6 lamps, transmission with 6 belt drives, on metal base, 19 x 14 in. Start Price: EUR 400 Condition: (3+/-)

Los 787

Miniaturmodell einer Balancierdampfmaschine, um 1850Funktionsmodell, signiert "W & S Jones, 30 Holborn, London", Maschinenteile aus Messing, Niederdruck-Balancierdampfmaschine, Watt-Typ, mit 6 Säulen, stehender Zylinder, Schwungrad Ø 6,3 cm, mit Spiritus beheizter Messingkessel, Ø 4,5 cm, auf authentischem Sockel im Stil einer Fabrikanlage, Mahagonifundament, Maße 19 x 12 x 20 cm, komplett mit Brenner, ungetestet. - Die Firma W & S Jones gehörte im späten 18. und frühen 19. Jahrhundert zu den erfolgreichsten Herstellern wissenschaftlicher Instrumente in London und verkaufte ein breites Spektrum an optischen, mathematischen und philosophischen Apparaten. Sie war bis Samuel Jones' Tod im Jahr 1859 in der Holborn Street 30 ansässig. Start Price: EUR 450 Zustand: (3+/-)Miniature Working Model of a Walking Beam Steam Engine, c. 1850Marked "W & S Jones, 30 Holborn, London", all-brass machine parts, Watt-type 6-column low-pressure balancing steam engine, vertical cylinder, flywheel Ø 2 ½ in., spirit-heated brass boiler, Ø 1 ¾ in., on base in the style of a factory plant, mahogany plinth, dimensions 7 ¼ x 4 ¾ x 7 4/5 in., complete with burner, untested. - Note: The firm of W. and S. Jones were among the most successful manufacturers of scientific instruments in London in the late 18th and early 19th centuries, selling a wide range of optical, mathematical and philosophical apparatus. It was based at 30 Holborn Street until Samuel Jones' death in 1859. Start Price: EUR 450 Condition: (3+/-)

Los 784

Funktionsmodell einer Lokomobile mit Dynamo, um 1980Vermutlich England, Einzylinder-Dampfmaschine, Spi­ritusheizung, Lenkung über Schnecke und Kette, Speisepumpe, Dampfpfeife, Wasserstandglas, Manometer, Dynamo vor dem Schornstein, Gummireifen (einer beschädigt), Maße 48 x 28 x 32,5 cm, ungetestet. Start Price: EUR 350 Zustand: (3-4/-)Working Model of a Traction Engine with Dynamo, c. 1980Probably England, single-cylinder steam engine, for spirit heating, fusee-and-chain steering, feed pump, steam whistle, water level glass, manometer, dynamo in front of the chimney, rubber-tyred wheels (one tyre damaged), dimensions 19 x 11 x 12 ¾ in., untested. Start Price: EUR 350 Condition: (3-4/-)

Los 792

Liegende Zweizylinder-Raddampfer-MaschinenanlageFein ausgearbeitetes Funktionsmodell aus Messing, Stahl und Aluminium, 2 Zylinder mit jeweils 37 mm Ø, Stephenson-Umkehrschaltung, Kreuzkopfführung, exzentergetriebene Speisepumpe, zwei 14,5cm-Räder mit je 8 verstellenden Schaufeln, auf schwarz lackiertem Holzsockel, 51 x 38 cm, funktioniert, mit Glashaube. - Die Maschine wurde von G. Houghton, Rochester, 1987 gebaut. Start Price: EUR 750 Zustand: (2/2)Twin-Cylinder Reversing Paddle Steamer EngineG. Houghton, Rochester, 1987, finely-engineered working model, brass, steel and aluminum, with two Ø 1 ½ in. cylinders, Stephenson's link reversing, bar-type crosshead guide, eccentric-driven feed pump, two 5 ¾ in. wheels with 8 paddles, on black-lacquered wood base, 20 x 15 in., working, with glazed cover. Start Price: EUR 750 Condition: (2/2)

Los 786

Präzisionsmodell einer liegenden Zweizylinder-Dampfmaschine, um 1980Hergestellt aus Messing und Stahl, Zylinder jeweils Ø 3,6 cm, Laufrichtung umsteuerbar, Kulissensteuerung mit Exzenterring und Rückwärtsexzenter, Kreuz-kopfführung, 2 Schwungräder, jeweils Ø 7,5 cm, in genietetem Rahmen auf Holzfundament, 31 x 14,5 cm, funktioniert. Start Price: EUR 180 Zustand: (2/2)Precision Model of a Horizontal Twin-Cylinder Steam Engine, c. 1980Brass and steel, twin cylinders Ø 1 2/5 in., with reversible direction of rotation, sliding control with eccentric ring and reverse eccentric, crosshead guide, two 3 in. flywheels, in riveted frame on wood plinth, 12 1/5 x 5 7/10 in., works. Start Price: EUR 180 Condition: (2/2)

Los 790

Funktionsmodell einer "Shand Mason"-Feuerspritze im Maßstab 1:6, um 1985Maxwell Hemmens Precision Steam Models, England. "York Fire Brigade", fein detailliertes Modell, Kupferkessel mit Silberlötung, sämtliche Armaturen, Schläuche und Düsen, Zweizylinder-Motor mit Zylinderkopf-Öler, exzenterbetriebene Speisepumpe und Absperrhahn, 2 Speichen-Schwungräder und direkt gekoppelte Wasserpumpen, Wassertanks, Saug- und Druckschlauch, Fahrgestell und Aufbau rot und schwarz lackiert, Holzspeichenräder mit Metallfelgen, Kohlebunker, Fahrersitz mit Messingschiene an der Rückseite, Bremsvorrichtung, Glocke, 2 Lampen und das Schild der Yorker Feuerwehr, Messingschild mit der Aufschrift "Shand Mason & Co, Engineers, London", Länge 54 cm, Breite 24 cm. - Dieses äußerst präzise Dampfmodel wurde von Maxwell Hemmens, einem der berühmtesten englischen Modellbau-Ingenieure, in Kleinstserie hergestellt. Dieses Modell wurde noch nie beheizt. Start Price: EUR 2200 Zustand: (2+/-)Live Steam 2-Inch Scale Shand Mason Horse-Drawn Fire Pump, c. 1985Maxwell Hemmens Precision Steam Models, England. "York Fire Brigade", finely detailed model, copper boiler with silver solder, all fittings, hoses and nozzles, 2-cylinder engine with cylinder head oiler, eccentric feed pump and stopcock, 2 spoked flywheels, directly coupled water pumps, water tanks, suction and delivery hose, red-and-black-painted chassis and superstructure, wood spoked wheels with metal rims, coal bunker, driver's seat with brass rail at the rear, braking device, bell, 2 lamps and "York Fire Brigade" sign, brass plate with the inscription "Shand Mason & Co, Engineers, London", length 21 ¼ in., width 9 ½ in. - This extremely accurate steam model was made in small series by Maxwell Hemmens, one of the most famous English model engineers. This model has never been fired. Start Price: EUR 2200 Condition: (2+/-)

Los 739

Modell-DampfmaschineStehender Kessel, Ø 9,5 cm, für Kohlenbefeuerung, mit Mahagoni isoliert, Wasserstandglas, ohne Manometer, Bockdampfmaschine, Zylinder 3,2 cm, Laufrichtung umsteuerbar, kleines Messing-Schwungrad, Ø 4,6 cm, Wassertank und Wasserpumpe, auf Holzsockel, 51 x 15 cm, müßte geschmiert werden. Start Price: EUR 160 Zustand: (3/3)Model Steam EngineMahogany-planked vertical boiler, Ø 3 ¾ in., for coal firing, water level glass, missing manometer, overcrank steam engine, cylinder 1 ¼ in., reversible, small brass flywheel, Ø 1 4/5 in., water tank and water pump, on wood base, 20 x 6 in., in need of lubrication. Start Price: EUR 160 Condition: (3/3)

Los 801

Modell eines Vierzylinder-Ottomotors aus AluminiumMit kombiniertem Ansaug-/Auspuffkrümmer mit Rippen, möglicherweise für den Einsatz in Kraftfahrzeugen oder in der Schifffahrt, komplett mit Elektrik, 4 KLG-Mini-Zündkerzen, Wasserzirkulationsleitungen, Vergaser, Auspuff und anderen Zubehörteilen, auf Holzbrett, 27 x 15 cm. Start Price: EUR 240 Zustand: (2-3/-)Working Model of a Four-Cylinder Spark Ignition Gasoline EngineAluminum, with combined finned inlet/exhaust manifold, possibly for motor vehicles or marine applications, complete with electrical system, 4 KLG Mini glow plugs, water circulation pipework, carburetor, exhaust pipe and other accessories, on wood board, 10 ½ x 6 in. Start Price: EUR 240 Condition: (2-3/-)

Los 765

4 Modell-DampfmaschinenMessing, Stahl und Gußmetall. 1) Stehende Zweizylinder-Verbunddampfmaschine, Hoch- und Niederdruckzylinder, Ø 7,5 und 6 cm, Höhe 28 cm. - 2) Liegende Dampfmaschine, doppeltwirkender Zylinder Ø 4,5 cm, Kreuzkopfführung in Gleitlager, Speichen-Schwungrad, Ø 13 cm. - 3) Stehende Dampfmaschine, Zylinder Ø 5,5 cm, Höhe 27 cm. - Und: 4) Stehende Dampfmaschine, Zylinder Ø 3 cm, Höhe 18 cm. - Alle Maschinen müßten geölt werden. Start Price: EUR 180 Zustand: (3/-)4 Model Steam EnginesBrass, steel and cast metal. 1) Vertical twin-cylinder compound steam engine, high- and low-pressure cylinders, Ø 3 and 2 1/3 in., height 11 in. - 2) Horizontal steam engine, 1 3/4-inch double-action cylinder, crosshead guide in plane bearing, spoked 5-inch flywheel. - 3) Vertical steam engine, 2 1/7-inch double-action cylinder, height 10 3/5 in. - And: 4) Vertical steam engine, 1 1/5-inch double-action cylinder, height 7 in. - All in need of oiling. Start Price: EUR 180 Condition: (3/-)

Los 779

4 Funktionsmodelle von frühen Dampf­maschinen1) "Charlotte", vertikale Säulendampfmaschine von Williamson Brothers in Kendal aus dem Jahr 1862, Hersteller T.V. Wild, 1990, Höhe 15 cm. - 2) Einzylinder-Balkenmaschine aus der Zeit um 1850, hergestellt um 1980, Höhe 14 cm. - 3) Murdock-Aitken-Tischdampfmaschine, detailliertes technisches Modell der Einzylinder-Dampfmaschine von 1840, aus Messing, und Stahl, 4 dorische Säulen, nach oben aus dem Zylinder austretende Kolbenstange, Kraftübertragung durch zwei vom Querhaupt ausgehende Stangen auf die Kurbelwelle, Schwungrad Ø 62 mm. - Und: 4) Chelston Model No. 10, liegende Einzylinder-Dampf­maschine, 2 Schwungräder, Länge 16,5 cm. - Alle Maschinen ungetested. Start Price: EUR 240 Zustand: (2-3/-)4 Working Models of Early Steam Engines1) "Charlotte", T.V. Wild, 1990, model of 1862 vertical-column steam engine by Williamson Brothers of Kendal, height 6 in. - 2) Model of a single-cylinder beam engine from around 1850, model c. 1980, height 5 ½ in. - 3) Model of a Murdock-Aitken four-pillar single-cylinder table engine from 1840, brass and steel, four Doric columns, cylinder with vertical piston rod, power transmission with two rods to the crankshaft, flywheel Ø 2 1/4 in. - And: 4) Chelston Model No. 10, horizontal single-cylinder machine, 2 flywheels, length 6 ½ in. - All untested. Start Price: EUR 240 Condition: (2-3/-)

Los 783

Funktionsmodell einer oszillierenden Einzylinder-DampfmaschineEin technisches Modell von sehr ungewöhnlicher Konstruktion. Der Zylinder schwingt oder schaukelt auf einem zentralen Drehpunkt, während sich das Schwungrad und die Kurbelwelle drehen. Sehr gut detailliert, aus Messing, Stahl und grau lackiertem Rahmen, mit funktionierendem Regler, Kondenswassertank, 22cm-Schwungrad, auf Holzsockel mit Metallplatte im Stil eines Werkstattbodens, mit Plakette des Erbauers "Ernst Eyle, Stadtallendorf" und Medaille "Internationales Modellbau-Treffen Bremervörde 1994", Gesamtmaß 26 x 22 x 34 cm. Getestet mit Druckluft, funktioniert. Start Price: EUR 650 Zustand: (2-3/2)Working Model of an Oscillating Single-Cylinder Overcrank Steam EngineAn extremely detailed engineering model of very unusual design, the cylinder oscillates or rocks on a central pivot as the flywheel and crankshaft rotate, brass, steel and grey-lacquered frame, with working governor, condensation tank, 9 3/4 in. flywheel, on wood board with metal plate in imitation of a workshop floor, with maker's plaque "Ernst Eyle, Stadtallendorf" and medal "Internationales Modellbau-Treffen Bremervörde 1994", overall dimension 10 1/5 x 9 ¾ x 13 1/3 in. Tested with compressed air, working. Start Price: EUR 650 Condition: (2-3/2)

Los 789

Modell-Dampfmaschine Typ "James Watt", um 1980Niederdruck-Balancierdampfmaschine, aus Eisen und Messing auf Holzsockel in der Art einer Fabrikhalle, doppeltwirkender Zylinder, Ø 33 mm, Schwungrad Ø 215 mm, Gesamtmaße: 40 x 23 x 34 cm. - Ein beeindruckendes Präzisionsmodell! Start Price: EUR 450 Zustand: (2-3/2-3)Model of a James Watt Type Steam Engine, c. 1980Low-pressure single-cylinder beam engine, iron and brass, on wood base in the style of a factory hall, double-action cylinder Ø 1 1/4 in., flywheel Ø 8 1/2 in. overall size: 15 ¾ x 9 x 13 1/3 in. - An impressive precision model! Start Price: EUR 450 Condition: (2-3/2-3)

Los 740

Einzylinder-Dampfmaschine mit KesselGenieteter Messingkessel, Ø 10 cm, mit Wasserstandglas, Manometer, Dampfpfeife und Sicherheitsventil mit Gewicht, für Spiritusheizung, Brenner fehlt, mit Holz beplankter Zylinder, Ø 4 cm, Schiebersteuerung, funktionierender Geschwindigkeitsregler, Riemen fehlt, Speisepumpe, Messing-Wassertank, Schwungrad Ø 18 cm, gemeinsam auf Holzsockel, Grundmaße 46 x 42 cm, unter fünfseitig verglastem Schaukasten mit Rahmen aus profiliertem Nußbaumholz, mit Druckluft getestet, funktioniert. Start Price: EUR 280 Zustand: (2-3/2-3)Single-Cylinder Steam Engine with BoilerRiveted brass boiler, Ø 4 in., with water level glass, manometer, steam whistle and weighted safety valve, for spirit heating, burner missing, wood-planked cylinder, Ø 1 ½ in., slide control, working speed regulator, belt missing, feed pump, brass water tank, 7 in. flywheel, on wood base, basic dimensions 18 x 16 ½ in., under five-sided glazed display case with profiled walnut frame, tested with compressed air, working. Start Price: EUR 280 Condition: (2-3/2-3)

Los 736

Funktionsmodell einer rotierenden Dampf­maschine nach WilderNach dem Original von 1825, mit rotierendem Zylinder, Messing, teilweise grün lackiert, mit Holz beplankter Zylinder, Ø 3,7 cm, Schiebersteuerung mit Exzenter, Speichenschwungrad, Ø 13,5 cm, auf Marmorsockel, 24 x 15 cm, sehr guter Zustand, funktioniert. Start Price: EUR 450 Zustand: (2/2)Working Model of a Wilder Rotating Steam EngineAfter the original from 1825, with rotating cylinder, all-brass construction, partially green-lacquered, wood-planked cylinder, Ø 1 ½ in., slide-valve control with eccentric ring, spoked flywheel, Ø 5 1/3 in., on marble base, 9 ½ x 6 in., very good condition, works. Start Price: EUR 450 Condition: (2/2)

Los 797

Luftgekühlter BootsmotorEngland, 10ccm-4-Takt-Motor, für Methanol oder Benzin, Messingtank, Glühkerze Champion P-5, Aluminiumgehäuse, Höhe 22 cm. Start Price: EUR 180 Zustand: (2-3/-)Air-Cooled Boat EngineEngland, 10cc 4-stroke engine, for methanol or gasoline, brass tank, glow plug Champion P-5, aluminum casing, height 8 3/4 in. Start Price: EUR 180 Condition: (2-3/-)

Los 762

Modell einer oszillierenden Einzylinder-DampfmaschineKonstruktion aus poliertem Stahl, Gußmetall und Messing, nach oben aus dem Zylinder austretende Kolbenstange, umsteuerbar mit Exzenter und Gegenexzenter, Zylinder Ø 7 cm, Schwungrad mit Speichen Ø 18 cm, auf Gußsockel und Holzfundament montiert, Gesamtmaße 20 x 18 x 29 cm. - Eine selten zu findende Konstruktion, exzellente Ausführung, funktioniert. Start Price: EUR 350 Zustand: (2-3/2-3)Working Model of an Oscillating Single-Cylinder Steam EnginePolished-steel, cast-iron and brass construction, cylinder with vertical piston rod, reversible, with eccentric and counter eccentric cylinder Ø 2 3/4 in., spoked flywheel Ø 7 in., on cast-iron base and wood plinth, overall dimensions 7 4/5 x 7 x 11 2/5 in. - A rare construction, well-built and in working condition. Start Price: EUR 350 Condition: (2-3/2-3)

Los 759

Modell-Dampfmaschine MetafotLutz Hielscher Technische Spielwaren, Wuppertal. Stehender Kessel, Ø 9,5 cm, für Kohlenbefeuerung, mit Mahagoni isoliert, Wasserstandglas, Manometer, Bockdampfmaschine, Zylinder 3,2 cm, Laufrichtung umsteuerbar, kleines Messing-Schwungrad, Ø 4,6 cm, Wassertank und Wasserpumpe, auf Holzsockel, 51 x 15 cm, funktioniert. Start Price: EUR 220 Zustand: (2/2)Metafot Model Steam EngineLutz Hielscher Technische Spielwaren, Wuppertal, Germany. Mahogany-planked vertical boiler, Ø 3 ¾ in., for coal firing, water level glass, manometer, overcrank steam engine, cylinder 1 ¼ in., reversible, small brass flywheel, Ø 1 4/5 in. water tank and water pump, on wood base, 20 x 6 in., working. Start Price: EUR 220 Condition: (2/2)

Los 738

Jowitt-Dampfmaschine mit TellerventilenFunktionsmodell der Samuel-G.-Jowitt-Maschine von 1907, Messing, Stahl und Guß, Zylinder Ø 2 Zoll, funktionierender Geschwindigkeitsregler, zwei 18cm-Schwungräder, Länge 35,5 cm, eine schnelllaufende Maschine, geeignet zum Antrieb von Modellgeneratoren. Start Price: EUR 180 Zustand: (3/-)Working Model of the Jowitt Poppet Valve Steam EngineModel of the Samuel G. Jowitt machine from 1907, brass, steel and cast metal, cylinder Ø 2 in., working governor, twin 7-inch flywheels, length 14 in., a high-speed engine, capable of driving model generators. Start Price: EUR 180 Condition: (3/-)

Los 767

Englisches Schaustellerfahrzeug mit Dampfantrieb im Maßstab 1:10Modell der Scenic-Lokomobile von Burrell & Sons, Hersteller: "Markie Precision Working Models", Spiritus-befeuerter Kupferkessel, mit Durchmesser, Wasserstandglas, Speisepumpe, Dynamo und Seilwinde, umsteuerbar, 2-Gang-Getriebe, lenkbare Vorderachse (über Ketten), Feststellbremse, 1 Zylinder, Speichenräder Ø vorne 12,9 cm - hinten 19,8 cm, Schwungrad Ø 12,5 cm Gesamtmaße: 60 x 28 x 31 cm. Holzdach mit LED-Beleuchtung liegt ohne Befestigung auf der Maschine. Start Price: EUR 800 Zustand: (2-3/-)1 1/8-Inch Scale Model of a Burrell Scenic Steam Showman’s EngineMarkie Precision Working Models. Silver-soldered spirit-fired copper boiler, single-cylinder engine, Stephenson’s slide-valve gear, two-speed gearbox, fusee-and-chain steering, reversible traction, brake, rope winch, pressure indicator, water gauge level, feed pump, spoked wheels, front Ø 5 in., rear Ø 7 3/4 in., flywheel Ø 5 in., overall size: 23 3/5 x 11 x 12 1/4 in., wood-planked roof with LED illumination loose on the machine. Start Price: EUR 800 Condition: (2-3/-)

Los 732

Modell einer stehenden Einzylinder-Bockdampfmaschine, um 1980Hergestellt von W. Boothby, England. Konstruktion aus poliertem Stahl, Gußmetall und Messing, nach oben aus dem Zylinder austretende Kolbenstange, Exzenter mit Stange zur Schiebersteuerung, Zylinder Ø 4 cm, Schwungrad mit Speichen Ø 18 cm, gußeiserner Unterbau auf Holzsockel montiert, Gesamtmaße 15 x 14 x 41,5 cm. Start Price: EUR 280 Zustand: (2/2)Working Model of a Single-Cylinder Overcrank Steam Engine, c. 1980W. Boothby, England. Polished-steel, cast-metal and brass construction, cylinder with vertical piston rod, eccentric rod slide valve control, cylinder Ø 1 1/2 in., spoked 7 in. flywheel, cast bedplate on wood base, 6 x 5 ½ x 16 1/3 in. Start Price: EUR 280 Condition: (2/2)

Los 769

Liegende Kolbendampfmaschine, um 1925Schweres Präzisionsmodell aus Stahl und Gußeisen, doppeltwirkender Zylinder Ø 8,2 cm, Schwungrad Ø 24,5 cm, Kreuzkopfführung, Kurbelwelle mit Gegengewicht, Schiebersteuerung mit Exzenterstange, auf Holzsockel, Gesamtmaße 51 x 22,5 x 28,5 cm, funktioniert. Start Price: EUR 400 Zustand: (2-3/2-3)Horizontal Steam Engine, c. 1925Heavy precision model, of steel and cast iron, double-action cylinder Ø 3 1/5 in., flywheel Ø 9 3/5 in., bar-type crosshead guide, counterbalanced crank, eccentric rod slide valve control, on wood plinth, overall size 20 x 8 7/8 x 11 1/5 in., working. Start Price: EUR 400 Condition: (2-3/2-3)

Los 770

Dreirad mit Herons Dampfantrieb, um 1900Messing und Eisen, original zaponiert oder schwarz lackiert, Vorderrad verstellbar, Messingkugel mit Düse, 6 cm, im Winkel verstellbar, Schal für Brenner (Petroleum oder Kerze), Gesamtmaße 20 x 11 x 15 cm, ungetestet. - Heron von Alexandria erfand um 100 n. Chr. die mit Wasserdampf betriebene Drehkugel (Heronsball). Nach diesem Grundprinzip wird dieses Dreirad mit Rückstoß angetrieben. Start Price: EUR 600 Zustand: (2-3/-)Tricycle with Heron's Engine, c. 1900Brass and iron, original lacquered or black japanned, adjustable front wheel, brass ball with nozzle, 2 1/3 in., adjustable in angle, scarffor burner (petroleum or candle). Overall dimensions 7 4/5 x 4 1/3 x 6 in., untested. -Heron of Alexandria invented the steam-powered spinning ball (Heron's ball) around 100 AD. This tricycle is driven by recoil according to this basic principle. Start Price: EUR 600 Condition: (2-3/-)

Los 750

Präzisionsmodell einer stehenden Zweizylinder-Dampfmaschine, um 1960Verbunddampfmaschine, hergestellt aus Messing, Stahl und Gußmetall, Hoch- und Niederdruckzylinder, Ø 4,4 und 5,7 cm, Laufrichtung umsteuerbar, Kulissensteuerung mit Exzenterring und Rückwärtsexzenter, Kreuzkopfführung in seitlichem Gleitlager, Wasserpumpe und Ölpumpe, Schwungrad Ø 5,5 cm, Gesamthöhe 22 cm. Start Price: EUR 280 Zustand: (3+/3+)Precision Model of a Vertical Twin-Cylinder Steam Engine, c. 1960Compound steam engine, brass, steel and cast metal, high and low pressure cylinders Ø 1 ¾ and 2 ¼ in., with reversible direction of rotation, sliding control with eccentric ring and reverse eccentric, crosshead guide in lateral plain bearing, water pump and oil pump, flywheel Ø 2 1/8 in., overall ht. 8 3/4 in. Start Price: EUR 280 Condition: (3+/3+)

Los 764

Zeitschriften, Bücher, Auktionskataloge und Weiteres über Dampfmaschinen1) "Engineering in Miniature", T.E.E. Publishing, London, Band 1, Ausgabe 1, April 1979 bis Band 17, No. 4, Oktober 1995, in 17 Ordnern. - 2) "The Model Engineer", Percival Marshall & Co. Ltd, London, gebundene Ausgaben, Band 90, 92 bis 98, 100 bis 102. - 3) "The Model Engineer and Amateur Electrician", 6 Nachdrucke der Ausgaben von 1901 bis 1904. - 4) Ca. 110 Auktionskataloge, Christie's, Sotheby's und weitere Auktionshäuser. - 5) Ca. 30 Bücher, inklusive "New Catechism of the Steam Engine", "Handbuch der Modell Dampfmaschinen", "The Textile Mill Engine", "The Live Steam Book", "Dampfmaschinen - Veteranen der Technik", "Steam and Stirling", "The Industrial Archaeology of the Stationary Steam Engine", "Traction Engines", "Model Marine Steam", "Model Boiler and Boilermaking" und "Dampf-Maschinen". - Und: 6) Eine Kiste mit weiteren Katalogen und Unterlagen. - Nur für Selbstabholer in Köln. Start Price: EUR 120 Zustand: (3/-)Journals, Books, Auction Catalogs and other Publications about Steam Engines.1) "Engineering in Miniature", T.E.E. Publishing, London, Volume 1, Issue Number 1, April 1979 to Volume 17, No. 4, October 1995, in 17 folders. - 2) "The Model Engineer", Percival Marshall & Co. Ltd, London, bound issues, Volumes 90, 92 to 98, 100 to 102. - 3) "The Model Engineer and Amateur Electrician", 6 reprints of issues from 1901 to 1904. - 4) Approx. 110 auction catalogs, Christie's, Sotheby's and other auction houses. - 5) Approx. 30 books, including "New Catechism of the Steam Engine", "Handbuch der Modell Dampfmaschinen", "The Textile Mill Engine", "The Live Steam Book", "Dampfmaschinen - Veteranen der Technik", "Steam and Stirling", "The Industrial Archaeology of the Stationary Steam Engine", "Traction Engines", "Model Marine Steam", "Model Boiler and Boilermaking" and "Dampf-Maschinen". - And: 6) A box of further catalogs and papers. - Only pick-up in Cologne. Start Price: EUR 120 Condition: (3/-)

Los 754

2 Einzylinder-Dampfmaschinen1) Stehende Maschine, um 1920, graviert "W. Bygrave, Barnet", mit Holz beplankter Zylinder, Ø 5,8 cm, Schiebersteuerung mit Exzenterstange, Schwungrad Ø 15,5 cm. Der Kolben bewegt sich nicht. Auf Holzsockel, 24 x 22 x 36 cm. (3/5) - Und: 2) Liegende Maschine, um 1990, mit Holz beplankter Zylinder, Ø 4,3 cm, Schiebersteuerung mit Exzenterstange, Schwungrad Ø 14,5 cm, funktioniert, auf Holzsockel, 32 x 12 x 15 cm. (2-3/2-3) Start Price: EUR 220 Zustand: (-/-)2 Single-Cylinder Steam Engines1) Vertical engine, c. 1920, engraved "W. Bygrave, Barnet", wood-planked cylinder, Ø 2 ¼ in., slide valve control with eccentric rod, flywheel Ø 6 in., piston stationary, on wood base, 9 ½ x 8 ¾ x 14 1/5 in. (3/5) - And: 2) Horizontal engine, c. 1990, wood-planked cylinder, Ø 1 ¾ in., slide valve control with eccentric rod, flywheel Ø 5 ¾ in., works, on wood base, 12 ½ x 4 ¾ x 6 in. (2-3/2-3) Start Price: EUR 220 Condition: (-/-)

Los 393

Schwedisches Ideal-Fahrrad mit ÖWA-Hilfsmotor, um 1926Fahrrad von C.E. Sundell & Co, Göteborg, Svensk Fabrikat Velocipeden. 28-Zoll-Räder, Torpedo-Frei­laufnabe von Fichtel & Sachs, Bosch-Lampe, Original-Lackierung, Vorderrad und Schutzblech durch ÖWA-Motorensatz ersetzt, bestehend aus luftgekühltem Einzylinder-Zweitaktmotor, Hubraum 83 cm³, 51mm-Zylinder, 2 PS bei 3500 U/min, Höchstgeschwindigkeit 40-50 km/h, Antrieb auf die Vordernabe über ein Planetengetriebe, Niederspannungsmagnetzündung im Schwungrad, mit ÖWA-Vergaser, Kraftstofftank, Verstärkung der Vorderradgabel und Bedienelementen. - Ein selten zu findendes Motorfahrrad in gutem und komplettem Originalzustand. Start Price: EUR 900 Zustand: (2-3/-)Swedish Ideal Bicycle with ÖWA Auxiliary Motor, c. 1926Bicycle by C.E. Sundell & Co, Gothenburg, Svensk Fabrikat Velocipeden. With 28-inch wheels, Fichtel & Sachs Torpedo freewheel hub, Bosch lamp, original paintwork, front wheel and mudguard replaced by ÖWA engine set, consisting of air-cooled single-cylinder two-stroke engine, displacement 83 cm³, 51 mm cylinder, 2 hp at 3500 rpm, top speed 40-50 km/h, drive to front hub via planetary gear, low-voltage magneto ignition in flywheel, with ÖWA carburettor, fuel tank, reinforced front fork and controls. - A scarce motorbike in good and complete original condition. Start Price: EUR 900 Condition: (2-3/-)

Los 778

2 Dampfmaschinen, um 19701) Liegende Kolbendampfmaschine, polierter Stahl, Messing und Gußmetall, 2 liegende doppelwirkende Zylinder, verbunden durch ein großes Schwungrad, 7,5 cm, Schiebersteuerung mit Exzentern, Schwungrad, auf Stahlplatte, 21 x 19 cm, etwas verharzt - Und: 2) Schiffs-Dampfmaschine, 2 stehende oszillierende Zylinder, doppeltwirkend, verbunden durch eine Kurbelwelle, Schiebersteuerung mit Exzentern, Schwungrad 7,5 cm, auf Holzbrett, 18 x 12 cm. Start Price: EUR 280 Zustand: (2/3)2 Steam Engines, c. 19701) Mill engine, polished steel, brass and cast metal, 2 horizontal double-action cylinders, connected via a large flywheel, eccentric-driven slide valves, 3-inch flywheel, on steel plate, 8 ¼ x 7 ¼ in., somewhat resinous. - And: 2) Marine engine, 2 vertical oscillating double-action cylinders, connected via a crankshaft, eccentric-driven slide valves, 3-inch flywheel, on wood plate, 7 x 4 ¾ in. Start Price: EUR 280 Condition: (2/3)

Loading...Loading...
  • 186049 Los(e)
    /Seite

Kürzlich aufgerufene Lose