186062 Preisdatenbank Los(e) gefunden, die Ihrer Suche entsprechen
186062 Lose gefunden, die zu Ihrer Suche passen. Abonnieren Sie die Preisdatenbank, um sofortigen Zugriff auf alle Dienstleistungen der Preisdatenbank zu haben.
Preisdatenbank abonnieren- Liste
- Galerie
-
186062 Los(e)/Seite
Los 1
A 19th century Le Roy & Fils ebonised and ormolu-mounted portico calendar dial clock, circa 1840, the five inch circular engine turned dial with Roman numerals and subsidiary moon phase and calendar dials, month and day apertures, the half hour striking movement with pin wheel escapement and exposed count wheel, striking on a gong with gridiron pendulum and back plate, marked Leroy & Fils Hors de Roi, a Paris No439, the bronze capped columns on stepped plinth base applied with ormolu palmette collar, on corresponding rosette bracket feet, 59cm high, 30cm wide, 15.5cm diameter
Los 1
A collection of Railway Locomotive drawings, including Caledonian 123 Single Engine 1886 War department Austerity 2-10-0 1944-45., South African Railway 15F 4-8-2 1938. North British Railway Atlantic 4-4-2 1906-21., GWR Pannier and GSWR Baltic Tank engines., LMS 3F Tank, Caledonian Railway Proposed Atlantic 1905 and Proposed Pacific 1913.
Los 1
A model live steam launch 'Lady Margaret' built in the style of a Lake Windemere Victorian Launch, with fitted Stuart Turner D10 live steam engine linked to gas fired copper boiler built to the designs of Martin Evans with sight glass, pressure gauge, displacement lubricator, hand feed pump, varnish plank finish with rear canopy. Boiler test certificate Perranporth and District Model Engineering Society. Dated 5-12-1991 to 4-12-1993. Working pressure 75 psi. Hydraulic test pressure 150 psi. Certificate No 10015. 175cm long.
Los 1
A scratch built model of a twin cylinder mill engine, built by Mr W Telford from his own research, the engine has polished steel cylinders with eccentric driven piston valves, Stephenson's link reverse, polished brass flywheel, disc crank with push rods and trunk guides. The cylinders have one steam inlet and two exaust outlets with two drain cocks per cylinder. The engine is mounted on a polished brass base with linkage pipe to horizontal copper boiler having mahogany lagging, sight glass and pressure gauge. It has an original boiler test certificate dated 15-6-1990 from Swindon boilers with a hydrostatic test of 100 lbs p.s.i.
Los 1
A Doll overtype model steam stationary engine, circa 1925 having brass cylinderical boiler supporting single cylinder open crank engine with twin flywheels, speed governor, cylinder oiling cup, weighted adjustable pressure gauge, whistle, sight glass, drain cocks, checker plate gallery walk-ways with hand rails and supported on simulated brickwork metal stand with spirit fired heater to base.
Los 1
A Stuart Turner No 9 Horizontal Steam Mill Engine, 1 1/2in bore x 1 1/2in stroke, fitted with eccentric driven water pump, speed governor with shut off valve, displacement oiler, drain cocks. The model is finished in green and black paintwork with polished brightwork and mounted on wooden plinth.
Los 1
A Stuart Turner No 1 Vertical Steam Engine, 2in bore x 2in stroke having fitted reverse gear, steam valves, displacement lubricator, drain cocks and related pipework, oilers to crank. The model has a metal clad cylinder and is finished in green paintwork with polished brightwork and linked to dynamo, mounted on wooden plinth.
Los 1
A 'Wyvern' model open crank I.C. Engine, having twin spoke flywheels, brass crank guard, side rod valve gear, crank and cylinder oilers. The model is finished in green and red paintwork with polished brightwork. It is mounted on a polished walnut plinth with linked water coolant tank, copper petrol tank and dynamo driving lights.
Los 1
A Stuart Turner 5a Vertical steam engine, having brass clad cylinder with drain cocks, Stephenson's link reverse gear, 2in bore x 2 1/4in stroke. Spoked flywheel. This model has been set up for marine use with feed pump, water heater, displacement lubricator and wick feed lubricators to trunk guide and crank bearings. The engine is finished in brick red paintwork with polished brightwork.
Los 1
A Model of a Sandersons 12 h p Beam Engine, built at 1/12th scale based on an 1846 engine with 2 1/2in stroke x 7/8in bore with 9 3/4in flywheel. The beam supported on reeded column with Watt's parellel motion, outside steam chest, shaft water pump, speed governor run by bevel gear linkage. The model is finished in black paintwork with polished brightwork and set on wooden simulated brickwork plinth. 18in x 9 1/2in.
Los 1
A Stuart Turner 5a vertical marine steam engine, having steel clad cylinder, drain cocks, reverse gear, spoke flywheel, 2 1/4in stroke x 2in bore, gun metal eccentric driven water pump, large brass displacement lubricator. oil cups to crank. The model finished in dark green paintwork with polished bright work. 15in high (38cm).
Los 1
A model of a horizontal steam mill engine, having spoked flywheel, eccentric driven steam valve, open crank with oil cups, crosshead guides with oil cups and displacement oiler fitted to steam inlet. The model on cast plinth with metal sole plate. Finished in red and green paintwork with black plinth. 12 1/2in long (32cm) Flywheel 5 3/4in. (150cm).
Los 1
A Rider Ericsson Vertical hot Air pumping engine, with beam action linkage to spoked flywheel 9in diameter (23cm), oiling cups, drain cocks and supported on cast stand with base and chimney to side. The model is finished in dark green paintwork with polished brass work and mounted on mahogany plinth. 19 1/4in high. (49cm).
Los 1
A Stuart Turner major beam engine, built to a high standard by G D Westrip of Hampton 1991. Finished in red, green and black paintwork with polished bright work. The engine is fitted with a speed governor, water pump, inside steam valve gear, steam control with wheel, brass oilers and cylinder drain cock. Set of steps leading to railed gantry and contained in glazed case standing on polished mahogany plinth.
Los 1
A Model of a Sandersons 12 h p Beam Engine, built at 1/12th scale based on an 1846 engine with 2 1/2in stroke x 7/8in bore with 9 3/4in flywheel. The beam supported on reeded column with Watt's parellel motion, outside steam chest, shaft water pump. The model is finished in blue paintwork with polished bronze work and set on pillar supported plinth. 17in x 6 1/2in.
Los 1
A Stuart Turner twin Victorian horizontal mill engine, 1in bore x 2in stroke, with double spoked flywheel, open crank with cross head guides, eccentric steam valves, speed governor and oiling cups. The model finished with hand rails. Green and red paintwork with polished brightwork. 16in long(41cm). 9in wide (23cm)
Los 1
A Brunell Models Grasshopper Beam Engine, Cylinder bore 1 3/8 x 2in stroke with 9 7/8in flywheel diameter, The model has a parellel motion supported on an 'A' frame above the vertical cylinder, water pump, eccentric driven steam valve. The model finished in red paintwork and polished bronzework and supported on simulated brickwork plinth. Base measurements 18 1/2ins x 7 1/2in. 18in high.
Los 1
A Stuart Turner 800 Gas Engine, with side rod and bevel gear linkage to open balanced crank and spoke flywheel, gunmetal rocker, inlet and out let valves, speed governor, spark plug, cylinder with 1 1/2in bore x 2 1/4in stroke, The model is finished in dark green paintwork with polished brightwork and is mounted on a polished mahogany plinth together with water tower, petrol tank and parts to run as a petrol engine. 16in long (41cm)
Loading...-
186062 Los(e)/Seite