186062 Preisdatenbank Los(e) gefunden, die Ihrer Suche entsprechen
186062 Lose gefunden, die zu Ihrer Suche passen. Abonnieren Sie die Preisdatenbank, um sofortigen Zugriff auf alle Dienstleistungen der Preisdatenbank zu haben.
Preisdatenbank abonnieren- Liste
- Galerie
-
186062 Los(e)/Seite
Los 1
A model live steam launch, built in the style of a Victorian Windemere launch, with fitted twin oscillating engine linked to gas fired copper boiler with planked lagging, sight glass, pressure gauge, safety valve, displacement oiler, hand feed pump, servo fitted for radio control use, 130cm long. The model is built in polished mahogany with glazed passenger area and canopy to back. Boiler certificate Number 78 from The Northern Association of Model Engineers. Dated 13-6-1996. Boiler Identification N79-60-78. Pressure test to 120 psi. Working pressure 60 psi. No current boiler test certificate.
Los 1
A 19th century German toy steam plant, the horizontal boiler fitted with weight steam pressure safety valve, whistle, spirit burner, and steam pipe to horizontal mill engine with oilers, linkage to steam valve, water pump. Plaque to side 'Dampfmaschine Lipsia Leipziger Lehrmittel Anstalt Von Dr Oskar Schneider', the steam plant mounted on metal base 30cm x 30cm
Los 1
A model of an Edwardian Steam launch, built to 1/24th scale from an all metal kit manufactured by Marten-Howes & Tomes of London, the model is a 'live steam model' fired by gas with copper boiler, sight glass, pressure gauge, safety valve and small vertical engine, unpainted and comes with its original box, 65cm long
Los 1
A German model steam plant possibly by Doll, no makers mark, the horizontal boiler with sight glass, pressure gauge, drain cock and safety valve, mounted on simulated brickwork plinth with matching chimney and linked to open crank horizontal steam engine with speed governor and generator on metal plinth. Some renovation required. Plinth 30cm x 26cm
Los 1
An Alyn Foundary's RLE model stationary engine, the twin spoked flywheels with inset governor, open crank with brass oilers, 'water hopper' cooled cylinder with brass oiler, side rod valve linkage, spark plug fitted, fuel inlet and exaust with silencer, cast brass oval plaque, with 'Engine No 411', the model is mounted on a polished mahogany traditional trolley with four spoked wheels, and ignition system fitted to base
Los 1
A Vulcan model live steam beam engine, built to Edgar T Westbury designs and Reeves castings with beam supported on 'A' frame with vertical cylinder, inside steam valve, eccentric linkage to crank with spoked flywheel. The model finished in red, green and black paintwork with polished bright work
Los 1
A live steam model horizontal mill engine, scratch built to a 'Victoria' style, the single cylinder with brass sheet cladding, cross head guides, eccentric driven steam valve with drain cock, open crank linked to spoked flywheel. 5 3/4in diameter. The engine is finished in green and red paintwork with polished brightwork. 13 1/2in long
Loading...-
186062 Los(e)/Seite