engine Auktionspreise | engine Empfohlene Preise

the saleroom

Anmelden

Registrieren

Sortieren nach

Liste
Galerie

186049 Los(e)

/Seite

A CENTAUR GAS MODEL HORIZONTAL STATIONARY ENGINE, not tested, fitted with ignition coil and carburetor, mounted on a tiled m

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 20

A CENTAUR GAS MODEL HORIZONTAL STATIONARY ENGINE, not tested, fitted with ignition coil and carburetor, mounted on a tiled metal and wooden base, diameter of flywheel approximately 17.5cm, approximately 60cc, constructed to a very good standard and appears complete and in very good condition, length of base approximately 33.5cm, width approximately 17cm, with copies of a series of articles on building the engine from Model Engineer Magazine from 1957 by the engines designer Edgar T. Westbury

Live Auktion

A BIOFIX HORIZONTAL SINGLE CYLINDER LIVE STEAM ENGINE, not tested, diameter of flywheel approximately 16cm, govenor on a cas

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 21

A BIOFIX HORIZONTAL SINGLE CYLINDER LIVE STEAM ENGINE, not tested, diameter of flywheel approximately 16cm, govenor on a cast iron base, maker plaque to base Biofix Poland No.233, date 1971, type mark damaged and illegible, appears complete and in very good condition, length of base approximately 30cm, width approximately 20cm

Live Auktion

A STIRLING SINGLE CYLINDER ENGINE, not tested, looks to be scratch or kit built, diameter of flywheel approximately 8.5cm, mo

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 22

A STIRLING SINGLE CYLINDER ENGINE, not tested, looks to be scratch or kit built, diameter of flywheel approximately 8.5cm, mounted on a wooden base, has been fired but appears largely complete and in fairly good condition, length of base approximately 18.5cm, width approximately 11cm

Live Auktion

AN UNMARKED HORIZONTAL SINGLE CYLINDER LIVE STEAM ENGINE, not tested, kit built ?, diameter of flywheel approximately 18cm, a

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 23

AN UNMARKED HORIZONTAL SINGLE CYLINDER LIVE STEAM ENGINE, not tested, kit built ?, diameter of flywheel approximately 18cm, appears complete and in fairly good condition, mounted on a plinth on a wooden base, length of base approximately 38cm, width approximately 23cm

Live Auktion

A STUART TURNER LIVE STEAM BEAM ENGINE, not tested, wooden clad cylinder, diameter of flywheel approximately 17.5cm, height o

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 24

A STUART TURNER LIVE STEAM BEAM ENGINE, not tested, wooden clad cylinder, diameter of flywheel approximately 17.5cm, height of engine approximately 27cm, length of beam approximately 20cm, has been used but appears complete and in fairly good condition, mounted on a wooden base, length of base approximately 44.5cm, width approximately 29cm, engine base stamped 80063

Live Auktion

AN UNMARKED VERTICAL SINGLE CYLINDER AIR COOLED ELECTRICALLY POWERED ENGINE, not tested, powered by AC Delco wiper motor in b

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 25

AN UNMARKED VERTICAL SINGLE CYLINDER AIR COOLED ELECTRICALLY POWERED ENGINE, not tested, powered by AC Delco wiper motor in base, requires electric supply, mounted on a wooden base with some damage to one corner, engine appears complete and in very good condition

Live Auktion

A NIKKO VERTICAL SINGLE CYLINDER WATER COOLED ENGINE, with radiator, fan, circulating pump and dynamo, all mounted on a base,

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 26

A NIKKO VERTICAL SINGLE CYLINDER WATER COOLED ENGINE, with radiator, fan, circulating pump and dynamo, all mounted on a base, not tested, requires electric supply, appears complete and in very good condition

Live Auktion

THREE BOXED MODEL AIRCRAFT ENGINES, not tested, RCV 60-SP with instructions, spare glow plugs etc, a P.A.W. Diesel 19-DS-4 wi

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 28

THREE BOXED MODEL AIRCRAFT ENGINES, not tested, RCV 60-SP with instructions, spare glow plugs etc, a P.A.W. Diesel 19-DS-4 with instructions, an Aurora/K Diesels 1.3 with instructions, with a smaller unmarked engine mounted on a stand and two spare propellors, one a G/F 3 series Master Airscrew, the other smaller and unmarked

Live Auktion

A STARPOWER HORIZONTAL SINGLE CYLINDER HOT AIR ENGINE, with a similar unmarked example, both appear complete with fuel bottle

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 29

A STARPOWER HORIZONTAL SINGLE CYLINDER HOT AIR ENGINE, with a similar unmarked example, both appear complete with fuel bottle/wick and in very good condition, both mounted on wooden stands and contained in display cases, not tested

Live Auktion

A PART CONSTRUCTED 5'' GAUGE 0-4-2 LIVE STEAM ENGINE, rolling chassis which appears largely complete, separate copper boiler

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 3

A PART CONSTRUCTED 5'' GAUGE 0-4-2 LIVE STEAM ENGINE, rolling chassis which appears largely complete, separate copper boiler and fire box, smoke box door and chimney assembly and other odd parts, length of chassis approximately 76cm

Live Auktion

A MAIER MECHANIC V2 GAS ENGINE, not tested, diameter of flywheel approximately 12.5cm, mounted on a aluminium base with fuel

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 30

A MAIER MECHANIC V2 GAS ENGINE, not tested, diameter of flywheel approximately 12.5cm, mounted on a aluminium base with fuel tank (65% butane 35% propane mixture), appears complete and in very good condition, with a copy of the assembly plan

Live Auktion

A BOXED WILESCO D2 HOT AIR ENGINE, not tested, appears complete and in very good condition, with instructions, unopened oil s

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 31

A BOXED WILESCO D2 HOT AIR ENGINE, not tested, appears complete and in very good condition, with instructions, unopened oil sachet and syringe, looks to have never been run, with a Kontax UK hot air engine, not tested, appears complete and in very good condition, looks to have hardly ever been run, contained in a glass dome display case, with two tea lights and an igniter

Live Auktion

A BAKER BALL HOPPER MONITOR HIT & MISS STATIONARY ENGINE, 3/8 scale model by Minicastings, appears complete and in very g

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 34

A BAKER BALL HOPPER MONITOR HIT & MISS STATIONARY ENGINE, 3/8 scale model by Minicastings, appears complete and in very good condition, not tested as labelled 'Do Not Start Govenor Disabled' but looks to have hardly ever been run, diameter of flywheels approximately 22.5cm, originally purchased in 2018, with a copy of the plans

Live Auktion

A LIVE STEAM TRACTION ENGINE MODEL, possibly from Bassett - Lowke castings, not tested, worn condition with some paint loss a

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 39

A LIVE STEAM TRACTION ENGINE MODEL, possibly from Bassett - Lowke castings, not tested, worn condition with some paint loss and wear but appears largely complete, length approximately 42cm

Live Auktion

A PART BOXED WILESCO D21 LIVE STEAM ENGINE, not tested, horizontal boiler mounted on tinplate brick pattern plinth with chimn

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 4

A PART BOXED WILESCO D21 LIVE STEAM ENGINE, not tested, horizontal boiler mounted on tinplate brick pattern plinth with chimney, driving single cylinder compound engine and flywheel, all mounted on tinplate base, appears complete and in very good condition, looks to have hardly, if ever been steamed, with a quantity of Wilesco Z80 flexible belts (No.00820), box damaged

Live Auktion

A SCRATCHBUILT LIVE STEAM MODEL OF A PORTABLE/AGRICULTURAL STEAM ENGINE, not tested, copper boiler, of copper brass and cast

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 40

A SCRATCHBUILT LIVE STEAM MODEL OF A PORTABLE/AGRICULTURAL STEAM ENGINE, not tested, copper boiler, of copper brass and cast iron construction, worn condition with some paint loss and wear but appears largely complete, length approximately 35cm, height with chimney erected approximately 43cm

Live Auktion

A VERTICAL SINGLE CYLINDER LIVE STEAM ENGINE, not tested, spirit fired, vertical wooden clad copper boiler with sight glass p

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 41

A VERTICAL SINGLE CYLINDER LIVE STEAM ENGINE, not tested, spirit fired, vertical wooden clad copper boiler with sight glass powering a small single cylinder engine and flywheel, worn condition but appears largely complete, mounted upon a Meccano style base

Live Auktion

A HANDBUILT MODEL VERTICAL TWIN CYLINDER LIVE STEAM MARINE ENGINE, not tested, spirit gas fired horizontal wooden clad boiler

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 42

A HANDBUILT MODEL VERTICAL TWIN CYLINDER LIVE STEAM MARINE ENGINE, not tested, spirit gas fired horizontal wooden clad boiler with sight glass and fuel tank, powering a twin cylinder engine and propellor, constructed and finished to a very high standard, in very lightly run condition and appears largely complete, mounted on a metal base, length approximately 43cm

Live Auktion

A HANDBUILT MODEL VERTICAL TWIN CYLINDER MARINE ENGINE, not tested, spirit or gas fired, fitted spark plug (missing) of brass

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 43

A HANDBUILT MODEL VERTICAL TWIN CYLINDER MARINE ENGINE, not tested, spirit or gas fired, fitted spark plug (missing) of brass, copper and steel construction, constructed and finished to a very high standard, in very lightly run condition and appears largely complete, mounted on a wooden base, length approximately 30cm

Live Auktion

A HANDBUILT MODEL VERTICAL TWIN CYLINDER MARINE ENGINE, not tested, of brass, copper and steel construction, constructed and

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 44

A HANDBUILT MODEL VERTICAL TWIN CYLINDER MARINE ENGINE, not tested, of brass, copper and steel construction, constructed and finished to a very high standard, in very lightly run condition and appears largely complete, height approximately 15cm, length approximately 18cm

Live Auktion

A HANDBUILT MODEL HORIZONTAL TWIN CYLINDER STATIONARY ENGINE, cylinder flanking central flywheel (diameter approximately 12.5

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 45

A HANDBUILT MODEL HORIZONTAL TWIN CYLINDER STATIONARY ENGINE, cylinder flanking central flywheel (diameter approximately 12.5cm), not tested, fitted spark plug, spirit or gas fired, of brass copper and steel construction, constructed and finished to a very high standard, in very lightly run condition and appears largely complete, mounted in a wooden base, length approximately 40cm

Live Auktion

A HANDBUILT MODEL HORIZONTAL SINGLE CYLINDER STATIONARY ENGINE, powering twin flywheels (diameter approximately 15cm), not te

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 46

A HANDBUILT MODEL HORIZONTAL SINGLE CYLINDER STATIONARY ENGINE, powering twin flywheels (diameter approximately 15cm), not tested, fitted spark plug spirit or gas fired, of brass, copper and steel construction, constructed and finished to a very high standard, in lightly run condition and appears complete, engine mounted on aluminium chassis in turn mounted on a wooden base, length approximately 33cm, tank marked GB

Live Auktion

A HANDBUILT MODEL VERTICAL TWIN CYLINDER MARINE ENGINE, not tested, in need of some minor attention, of brass, steel and alum

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 47

A HANDBUILT MODEL VERTICAL TWIN CYLINDER MARINE ENGINE, not tested, in need of some minor attention, of brass, steel and aluminium construction, constructed and finished to a very high standard, in run condition, height approximately 38cm, length approximately 36cm

Live Auktion

A HANDBUILT MODEL SEVEN CYLINDER RADIAL AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in lig

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 48

A HANDBUILT MODEL SEVEN CYLINDER RADIAL AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in lightly run condition and possibly missing few small parts, fitted with a Powermax wooden propellor (length approximately 61cm), all mounted on a wooden and metal base with fuel tank, diameter of radial approximately 23cm, length of engine approximately 17cm

Live Auktion

A HANDBUILT MODEL THREE CYLINDER RADIAL AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in lig

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 49

A HANDBUILT MODEL THREE CYLINDER RADIAL AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in lightly run condition and appears largely complete, fitted with an Airflow 20-8 wooden propellor (length approximately 50cm), all mounted on a wooden and metal base, with fuel tank, width approximately 20cm, length of engine approximately 15cm

Live Auktion

AN UNBOXED WILESCO D24el LIVE STEAM ENGINE, not tested, horizontal boiler mounted on tinplate brick pattern plinth with chimn

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 5

AN UNBOXED WILESCO D24el LIVE STEAM ENGINE, not tested, horizontal boiler mounted on tinplate brick pattern plinth with chimney, driving single cylinder engine and flywheel driving a 1.5v/3amp generator which powers an electric lamp, all mounted on a tinplate base, appears complete and in very good condition, looks to have hardly, if ever been steamed, with a quantity of spare bulbs

Live Auktion

A HANDBUILT MODEL THREE CYLINDER RADIAL AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in run

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 50

A HANDBUILT MODEL THREE CYLINDER RADIAL AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in run condition and appears largely complete, fitted with a Classic Series propellor (length approximately 40cm), all mounted on a wooden and metal base, with fuel tank, width approximately 17cm, length of engine approximately 19cm

Live Auktion

A HANDBUILT MODEL HORIZONTAL TWIN CYLINDER AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 51

A HANDBUILT MODEL HORIZONTAL TWIN CYLINDER AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in run condition, missing both spark plugs but otherwise appears largely complete, mounted on a wooden and metal base with fuel tank, length of engine approximately 18cm, width approximately 22cm

Live Auktion

A HANDBUILT MODEL V4 CYLINDER AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in lightly run c

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 52

A HANDBUILT MODEL V4 CYLINDER AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in lightly run condition, missing spark plugs but otherwise appears largely complete, mounted on an aluminium base, length of engine approximately 16cm

Live Auktion

A HANDBUILT MODEL HORIZONTAL TWIN CYLINDER AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 53

A HANDBUILT MODEL HORIZONTAL TWIN CYLINDER AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in run condition, missing both spark plugs but otherwise appears largely complete, fitted with a wooden Precedent Smart 18-6 propellor (length approximately 45cm) mounted on a wooden and metal base, length of engine approximately 16cm, width approximately 19cm

Live Auktion

A HANDBUILT MODEL VERTICAL SINGLE CYLINDER AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 54

A HANDBUILT MODEL VERTICAL SINGLE CYLINDER AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in run condition and may be missing a few small items, fitted with a Master Airscrew propellor (length approximately 30cm), mounted on an aluminium stand with a fuel tank, length of engine approximately 19cm

Live Auktion

A HANDBUILT MODEL FIVE CYLINDER RADIAL AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in run

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 55

A HANDBUILT MODEL FIVE CYLINDER RADIAL AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in run condition, missing spark plugs but otherwise appears largely complete, mounted on a wooden and metal stand with a fuel tank, length of engine approximately 24cm, diameter of radial approximately 27cm

Live Auktion

A HANDBUILT MODEL SEVEN CYLINDER RADIAL AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in run

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 56

A HANDBUILT MODEL SEVEN CYLINDER RADIAL AIRCRAFT ENGINE, not tested, constructed and finished to a very high standard, in run condition, missing one spark plug but otherwise appears largely complete, mounted on a wooden and metal stand with a fuel tank etc, length of engine approximately 26cm, diameter of radial approximately 28cm, with a folder of plans and specifications, etc, for a nine cylinder Radial Engine designed by Clyde R Garl (folder not checked for completeness)

Live Auktion

A HANDBUILT MODEL VERTICAL SINGLE CYLINDER AIRCRAFT ENGINE, not tested, constructed and finished to a high standard, in run c

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 57

A HANDBUILT MODEL VERTICAL SINGLE CYLINDER AIRCRAFT ENGINE, not tested, constructed and finished to a high standard, in run condition, missing spark plug, with an electric model aircraft engine, part built engine, a quantity of assorted parts and a wooden propellor (length approximately 71cm)

Live Auktion

A HANDBUILT MODEL HORIZONTAL SINGLE CYLINDER ENGINE, powering a flywheel which powers an electric motor and lamp, not tested,

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 58

A HANDBUILT MODEL HORIZONTAL SINGLE CYLINDER ENGINE, powering a flywheel which powers an electric motor and lamp, not tested, constructed and finished to a good standard, in run condition but appears largely complete, length approximately 19cm, mounted on a metal stand, with two smaller handbuilt horizontal single cylinder engines, not tested but appears largely complete, with a quantity of spare parts and a quantity of assorted locomotive plans and other assorted drawings, etc (two boxes)

Live Auktion

AN UNBOXED WILESCO D222 LIVE STEAM ENGINE, not tested, horizontal electrically powered boiler mounted on tinplate brick patte

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 6

AN UNBOXED WILESCO D222 LIVE STEAM ENGINE, not tested, horizontal electrically powered boiler mounted on tinplate brick pattern plinth with chimney, powering twin cylinder engine and flywheel which drives a lineshaft, all mounted on a tinplate base, appears largely complete and looks to have hardly ever been fired

Live Auktion

A BOXED WILESCO D141/66 LIVE STEAM WORKSHOP WITH DYNAMO, not tested, horizontal boiler on tinplate brick pattern plinth with

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 7

A BOXED WILESCO D141/66 LIVE STEAM WORKSHOP WITH DYNAMO, not tested, horizontal boiler on tinplate brick pattern plinth with chimney, powering a single cylinder engine and flywheel which powers a dynamo driving a lineshaft to power four pieces of workshop equipment and a light, all mounted on a tinplate base covered with a corugated tinplate canopy, appears largely complete and looks to have hardly ever been fired, box damaged

Live Auktion

A BOXED WILESCO D18 LIVE STEAM ENGINE, not tested, horizontal boiler on tinplate brick pattern plinth with chimney, powering

Keine Abbildung

Keine Abbildung

Richard Winterton Auctioneers

Los 9

A BOXED WILESCO D18 LIVE STEAM ENGINE, not tested, horizontal boiler on tinplate brick pattern plinth with chimney, powering a single cylinder engine and flywheel driving a dynamo which runs a lamp, appears complete, with some accessories and instructions, very good condition, looks to have hardly, if ever been fired, box damaged

Live Auktion

Three Alfred Dunhill lighters, of oval section, one with engine turned front and back, one engine turned with faceted square

Keine Abbildung

Keine Abbildung

Bellmans

Los 143

Three Alfred Dunhill lighters, of oval section, one with engine turned front and back, one engine turned with faceted square all around and one, two colour with engine turned front and back (3).

Timed Auktion

Two Cartier gold plated lighters, each with a red enamel band, one with ribbed sides, no. 99430 S, the other engine turned wi

Keine Abbildung

Keine Abbildung

Bellmans

Los 144

Two Cartier gold plated lighters, each with a red enamel band, one with ribbed sides, no. 99430 S, the other engine turned with repeated faceted suares, no. 36076 T (2).

Timed Auktion

A Cartier lighter, engine turned with repeated faceted squares, with an entwined three-colour band, no. 99421 S and another s

Keine Abbildung

Keine Abbildung

Bellmans

Los 145

A Cartier lighter, engine turned with repeated faceted squares, with an entwined three-colour band, no. 99421 S and another similar with red enamel band, no. 67377 M (2).

Timed Auktion

Four Alfred Dunhill lighters, including one with bark finish, one a brushed finish, one engine turned and one with brushed fi

Keine Abbildung

Keine Abbildung

Bellmans

Los 147

Four Alfred Dunhill lighters, including one with bark finish, one a brushed finish, one engine turned and one with brushed finish and gilded bands (4).

Timed Auktion

Four Alfred Dunhill lighters, one with brushed finish, one engine turned with repeated lozenges, one black enamelled and one

Keine Abbildung

Keine Abbildung

Bellmans

Los 148

Four Alfred Dunhill lighters, one with brushed finish, one engine turned with repeated lozenges, one black enamelled and one black enamelled and speckled (4).

Timed Auktion

A rectangular silver Freedom Casket, Birmingham 2003, maker's mark T F., the hinged cover with an engine turned border and en

Keine Abbildung

Keine Abbildung

Bellmans

Los 149

A rectangular silver Freedom Casket, Birmingham 2003, maker's mark T F., the hinged cover with an engine turned border and engraved with the arms and motto of the Borough of Eastleigh, the front inscribed 'Honorary Freedom of The Borough of Eastleigh conferred on Margaret Rita Kyrie O.B.E. JP. BA., 27th March 2003', wood lined, 23.5 x 13.5 x 7cm, on a rectangular mahogany plinth, also a silver trumpet shape vase from an epergne (2).

Timed Auktion

Three various silver engine turned cigarette cases, one detailed 935 and another, engraved with a double crest, 11.4ozs weigh

Keine Abbildung

Keine Abbildung

Bellmans

Los 156

Three various silver engine turned cigarette cases, one detailed 935 and another, engraved with a double crest, 11.4ozs weight combined (4).

Timed Auktion

A silver mounted patent cigar cutter, London 1912, 16.2cm wide, initialled, an engine turned silver cigarette case and an eng

Keine Abbildung

Keine Abbildung

Bellmans

Los 192

A silver mounted patent cigar cutter, London 1912, 16.2cm wide, initialled, an engine turned silver cigarette case and an engine turned silver book match case, Birmingham 1929, 5.2ozs, combined weight of weighable silver (3).

Timed Auktion

An Art Deco silver jewel casket, J Gloster Ltd, Birmingham 1925, curved rectangular, the hinged cover engine turned, blue sil

Keine Abbildung

Keine Abbildung

Bellmans

Los 195

An Art Deco silver jewel casket, J Gloster Ltd, Birmingham 1925, curved rectangular, the hinged cover engine turned, blue silk satin lined, 11.5cm wide, a small silver trophy, a cylindrical silver pepperette, a paper knife, detailed 800, with cast handle, 14.5cm long, two silver blade mother of pearl handled knives also a pair of mother of pearl mounted opera glasses (7).

Timed Auktion

An Edwardian engine turned silver dressing table box, Goldsmiths & Silversmiths Company, London 1904, 10 x 5.5cm, monogra

Keine Abbildung

Keine Abbildung

Bellmans

Los 221

An Edwardian engine turned silver dressing table box, Goldsmiths & Silversmiths Company, London 1904, 10 x 5.5cm, monogrammed, a rectangular silver mounted photograph frame, marks worn, sight size 13.5 x 9cm, a novelty miniature silver box, English Import marks for 1895, in the form of a foliate embossed sombrero, 6cm, USA silver dollar 1926 and four quarter dollars, 5.5ozs combined weight of weighable silver (7).

Timed Auktion

A Victorian engine turned propelling pencil, S Mordan & Co, makers and patentees, with swivel cornellian set capital, 9.5

Keine Abbildung

Keine Abbildung

Bellmans

Los 230

A Victorian engine turned propelling pencil, S Mordan & Co, makers and patentees, with swivel cornellian set capital, 9.5cm long, a Victorian reeded and foliate cast propelling pencil, with crested stone set end, 4cm long and a pink and white banded guilloche enamelled pencil, in cylindrical case, 5cm long (3).

Timed Auktion

A George III circular memorial locket, engine turned enclosing a monogram and on the reverse side a lock of hair with monogra

Keine Abbildung

Keine Abbildung

Bellmans

Los 265

A George III circular memorial locket, engine turned enclosing a monogram and on the reverse side a lock of hair with monogram with a foliate cast border, 2.2cm diameter, two glazed circular pendant lockets, 19th century, two with foliate cast borders and a Victorian oval rolled gold locket (4).

Timed Auktion

An Art Deco 9ct gold engine turned rectangular compact, English Import marks for 1930, the hinged cover enclosing a mirror, c

Keine Abbildung

Keine Abbildung

Bellmans

Los 341

An Art Deco 9ct gold engine turned rectangular compact, English Import marks for 1930, the hinged cover enclosing a mirror, compact with hinged cover and lipstick holder, numbered '066474', 6 x 4 x 1cm, 75.5gms gross.

Timed Auktion

An Art Deco blue enamelled travelling pocket watch, in square case, the engine turned dial with Arabic numerals, and subsidia

Keine Abbildung

Keine Abbildung

Bellmans

Los 379

An Art Deco blue enamelled travelling pocket watch, in square case, the engine turned dial with Arabic numerals, and subsidiary seconds dial, the case marked 935, with patent number 125267 and numbered 1661901, 3.1cm wide, 4cm high; and a nickel cased similar example (2).

Timed Auktion

A Swiss gold pocket watch, 19th century, with foliate chased case, the engine turned dial with a foliate centre and border, i

Keine Abbildung

Keine Abbildung

Bellmans

Los 399

A Swiss gold pocket watch, 19th century, with foliate chased case, the engine turned dial with a foliate centre and border, inscribed on the dust cover, No. 12274 .... and enclosing a later Zenith movement, 4.3cm diameter, 63.5gms gross.

Timed Auktion

Henry Marc A Paris; a 19th century rectangular black marble cased mantel clock, the engine turned gilt metal dial with Roman

Keine Abbildung

Keine Abbildung

Bellmans

Los 651

Henry Marc A Paris; a 19th century rectangular black marble cased mantel clock, the engine turned gilt metal dial with Roman numerals, the twin train movement striking on a bell, 33cm high x 25cm wide x 14cm deep, with key (2).

Timed Auktion

A Stationary Scratch Built Live Steam plant having single flywheel engine and boiler, on wood stand

Keine Abbildung

Keine Abbildung

1818 Auctioneers

Los 406

A Stationary Scratch Built Live Steam plant having single flywheel engine and boiler, on wood stand

Timed Auktion

A Mamod Live Steam Traction Engine, having yellow wheels, missing canopy

Keine Abbildung

Keine Abbildung

1818 Auctioneers

Los 408

A Mamod Live Steam Traction Engine, having yellow wheels, missing canopy

Timed Auktion

A box of 00 scale Shelf Display Locomotives and Tenders, a Hornby 00 gauge InterCity 125 engine and four railway related volu

Keine Abbildung

Keine Abbildung

1818 Auctioneers

Los 412

A box of 00 scale Shelf Display Locomotives and Tenders, a Hornby 00 gauge InterCity 125 engine and four railway related volumes and magazines

Timed Auktion

A Corgi diecast, Carrimore Car Transporter, in original box 1105, a Dinky Supertoys diecast, 20 Ton Lorry Mounted Crane Coles

Keine Abbildung

Keine Abbildung

1818 Auctioneers

Los 420

A Corgi diecast, Carrimore Car Transporter, in original box 1105, a Dinky Supertoys diecast, 20 Ton Lorry Mounted Crane Coles, in original box 972 and a Matchbox diecast, King Size Merryweather Fire Engine, in original box K15

Timed Auktion

A Lego City Shop Display box containing a Fire Engine, Burning Building and Diorama , made up

Keine Abbildung

Keine Abbildung

1818 Auctioneers

Los 520

A Lego City Shop Display box containing a Fire Engine, Burning Building and Diorama , made up

Timed Auktion

A Bachmann 00 gauge 2-6-2 LMS Ivatt Tank Engine 1202, boxed 31-453A with four similar 00 gauge boxed Rolling Stock items

Keine Abbildung

Keine Abbildung

1818 Auctioneers

Los 522

A Bachmann 00 gauge 2-6-2 LMS Ivatt Tank Engine 1202, boxed 31-453A with four similar 00 gauge boxed Rolling Stock items

Timed Auktion

186049 Los(e)

/Seite