A Victorian Japanned hardwood pedestal table, the circular tilt top with a gilt foliate trailing frieze enclosing a central panel depicting three scholars within a tree lined landscape, the top supported on a turned and tapering column and a triform plinth base, upon scrolled feet, 57cm H x 60cm D
We found 173444 price guide item(s) matching your search
There are 173444 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
173444 item(s)/page
A Victorian mahogany twin pedestal partners desk, the rectangular moulded top inset with a gilt tooled leather skiver, above a frieze drawer to both sides, raised upon twin pedestals each with four drawers to both sides, and flanked by fluted detail, raised upon a plinth base, 75cm H x 166cm W x 137cm D
A Victorian mahogany specimen cabinet, the rectangular moulded top inset with a brass swing handle, above the glazed door opening to twenty two slender drawers, each applied with ivory knob handles and numbered one to twenty one, one drawer blank, raised upon an integrated plinth base, 38cm H x 29cm W x 34cm D, along with a collection of English coinage, including copper, cupro-nickle and pre-decimal examples
A mid 19th century mahogany library bookcase, the moulded cornice above a plain frieze and two pairs of glazed doors opening to eight adjustable shelves, the base with an arrangement of four panelled cupboard doors, upon a plinth base, 258cm H x 223cm W x 53cm DCondition reportSlight rubbing to the plinth base from the cupboard doors, all glazed doors close/lock although very minor distortion in the frames.Overall only very light wear commensurate with age and use
Taxidermy; an early 20th century fox mask upon an oak shield shaped plinth, 28cm high, a deer foot applied to an oak plinth and dated 'Friday 4th April, 1919', a second example on a shield shaped plinth 'Winsford Hill, April 4th 1942', a foxes brush surmounted on a turned handle and one other item (5)
A Victorian olive wood work box, the hinged cover centred with a mother of pearl cartouche within geometric banding, opening to a removable compartmentalised tray, above a fall front with inset interior skiver, enclosing three graduated drawers, 37cm H x 33cm W x 26cm DCondition reportOne knob handle detached but present, although there is some minor wear/damage around the aperture.Two detached chips to the lid corner, both 2cm long, 16cm strip of missing veneer to the rear plinth, with a further minor veneer chip.Otherwise minor general wear, stains and marks commensurate with age and use
A Victorian pine inverted breakfront kneehole dressing table, the oval swing mirror raised upon 'C' scroll supports and small drawers, upon the moulded top with central frieze drawer, flanked by two banks of three graduated drawers each applied with carved flower head button handles, raised upon a plinth base, overall applied with detailed moulded beading, 152cm H x 127cm W x 55cm D
An early 20th century silk/yarn winder by Goodbrand & Co, Stalybridge, the hexagonal pulley wheel with turned wooden handle below the brass gauge signed with the makers name, and a chiming bell, the brass and steel mechanism mounted upon a polished walnut plinth base, applied with a makers plaque, and raised upon turned ebonised feet, 75cm high
A pair of mid 19th century ormolu candlesticks, cast in the form of leafy stems with three cast silver coloured birds applied to the base, raised upon intertwined leafy feet, 22cm high (lacking one bird figure), along with a pair of 19th century cast gilt metal twin branch table lamps, each with a cast figure of a female warrior, possibly Joan of Arc, upon a square marble plinth with scrolling leaf twin branches, 23cm high, and a 19th century gilt metal and malachite inkwell, the hinged cover with a cherub figural finial upon an integrated dish with intertwined snake handles, 11cm high (5) (at fault) Provenance; The Estate of Lord Harlech
An early 19th century oak and mahogany cross banded eight day longcase clock by J Edwards Corwen, the 36cm painted break arch dial centred with a subsidiary second dial and signed with the makers name, the two train movement striking on a saucer bell, within an oak case applied with chevron banding and integrated quarter pilasters, upon a plinth base and bracket feet, 227cm high, two weights and pendulum
An 18th century and later constructed oak chest of drawers, formed from an arrangement of four graduated invert moulded drawers, each applied with brass knob handles, raised upon a plinth base with bracket feet, 131cm H x 75cm W x 55cm DCondiition reportJoint splits to both sides, small repair around the top drawer frame, top RH corner.Drawers one and three lacking moulding on one side, moulding on drawer two has been replaced.Light crack on LHS with a chip to the rear LHS corner.All drawers run smoothly, general wear commensurate with age and use
A late 19th century inlaid mahogany twin pedestal writing desk, the inverted breakfront top with a reeded edge and inset leather skiver, above three frieze drawers applied with satinwood crossbanding and foliate detail, raised upon twin pedestals each with conforming inlay and three graduated drawers applied with brass ring handles, upon a plinth base and bracket feet, 75cm H x 122cm W x 65cm DCondition reportLacking castors on the LH pedestal causing the desk top to sit unevenly, ring marks to skiver along with other stains and marks with minor veneer chips.General scuffs to the plinth corners, full compliment of original locks and handles.Kneehole height 59cm, overall desk patina appears dull and would benefit from a clean and light restorationDesk top seperates from the two pedestals
A large Italian Baroque painted and gilt decorated linen cupboardCentral Italy, probably Tuscan, late 17th century and later The panelled doors applied with carved acanthus leaves above a pair of drawers with iron handles on a stepped plinth base and corner bracket feet, 185cm wide x 73cm deep x 236cm high, (73in wide x 29 1/2 in deep x 92 1/2in high)This lot is subject to the following lot symbols: TPTP Lot will be moved to an offsite storage location (Cadogan Tate, Auction House Services, 241 Acton Lane, London NW10 7NP, UK) and will only be available for collection from this location at the date stated in the catalogue. Please note transfer and storage charges will apply to any lots not collected after 14 calendar days from the auction date.For further information on this lot please visit Bonhams.com
After the antique, a carved marble figure of Diana of Gabill19th centuryHer right arm raised (now lacking hand) adorned in drapery standing on a plinth base, together with a stone column plinth base, weathered, 44cm wide, 36cm deep, 143 cm high (17in wide, 14in deep, 56in high) the plinth bae: 38.5cm high (2)Footnotes:Widely believed to represent the Goddess Artemis and traditionally attributed to the sculptor Praxiteles. The sculpture on which the present lot is modelled was discovered in 1792 by Gavin Hamilton on the property of the Prince Borghese at Gabii and immediately became part of the Borghese collection. It is now housed in the Louvre.This lot is subject to the following lot symbols: TPTP Lot will be moved to an offsite storage location (Cadogan Tate, Auction House Services, 241 Acton Lane, London NW10 7NP, UK) and will only be available for collection from this location at the date stated in the catalogue. Please note transfer and storage charges will apply to any lots not collected after 14 calendar days from the auction date.For further information on this lot please visit Bonhams.com
A Renaissance fragmentary marble figure of a Classical maidenNorthern France or Flemish, mid-16th century Modelled standing and classical draped in fabric, on an oval base and together with a later display plinth, 43cm wide, 29cm deep, 101cm high (17in wide, 11.5in deep, 40in high) Footnotes:Following the Renaissance convention, it is possible that the present fragmentary sculpture once represented one of three theological virtues (Faith, Hope and Charity) endorsed by the church during the Middle Ages. The elegantly carved folded drapery has been expertly executed and appears to move against the figure's skin as if invigorated by an unseen breeze. The present fragment recalls the work of the Flemish sculptor and architect Jacques Du Broeucq (c. 1500-1584). Note, for example Du Broeucq's stately virtues carved for Sainte-Waudru in Mons, Belgium. These Du Broeucq sculptures are executed in straightforward poses, enlivened by drapery that clings to the torso but sweeps around the legs in broader swaths. Another figure whose carving is worth comparison to the drapery of the present work is that of Charity, attributed to the circle of Jacques du Broeucq and preserved in the collection of The Metropolitan Museum of Art, New York (accession number: 65.110).This lot is subject to the following lot symbols: TPTP Lot will be moved to an offsite storage location (Cadogan Tate, Auction House Services, 241 Acton Lane, London NW10 7NP, UK) and will only be available for collection from this location at the date stated in the catalogue. Please note transfer and storage charges will apply to any lots not collected after 14 calendar days from the auction date.For further information on this lot please visit Bonhams.com
A PAIR OF FRENCH 'VERDE CENTICO' AND ORMOLU MOUNTED URNS, each of classical design with everted rims mounted with leaf cast side handles and ribbon tied floral swags on waisted support and squared plinth base, 62 cm Condition Report: Both in good original conditionOne with slightly loose mount, in need of tac
A PAIR OF EDWARDIAN MAHOGANY SIDEBOARD URNS AND COVERS, c.1900, of classical design with turned and pointed final over a panelled body and plinth base. 60cm highCondition Report: These are Knife urns, the tops open to reveal interior with knife slotsIn good conditionExtension mechanism is working well on bothSee images
A mid 19th century model of a beam engine, supported on four turned steel polished columns having open crank with decorative linkage to outside steam valve and steam chest, spoked flywheel, speed governor (missing parts to steam shut off control). Watts parallel motion to beam and piston. The whole model supported on polished brass plate base. No wooden plinth present.Width 26cm. Height 18cm.Condition Report: Dimensions of base plate: 25.5cm x 15cm x 0.02cmPlease see additional images for conditionCondition Report Disclaimer
A well engineered model of Alyn Foundry 'RLE' 40cc internal combustion farm petrol barn engine No 118. Built by the late Mr Duncan Laidlaw of Bristol. The engine of open crank design with fitted side rod valve gear linkage, twin 6 1/2" diameter flywheels with water cooling hopper, exhaust, carburettor and metal fuel tank fitted to hardwood plinth. The model finished in green and red paintwork with cast brass engine number plaque to front. Ignition plug not present. Engine length 35cm. Width 18cm. Height 22cm.* RLE Stands for 'Roy's Little Engine' as this was the sons name of the owner of Alyn Foundry .
A well engineered model of 'The Associated Line' hit-and-miss internal combustion stationary engine. Built by the late Mr Duncan Laidlaw of Bristol. The engine being of open crank design with fitted side rod valve gear linkage, twin spoked flywheels with water cooling hopper, exhaust, carburettor and a metal fuel tank fitted to hard wood plinth, the single cylinder having brass and glass oiler. The model finished in bright red paintwork with original manufacturers transfer to side of water hopper. Engine length 30cm. Width 16cm. Height 17cm.
A well engineered model of Alyn Foundry 'RLE' 40cc internal combustion farm petrol barn engine No 153. Built by the late Mr Duncan Laidlaw of Bristol. The engine of open crank design with fitted side rod valve gear linkage, twin 6 1/2" diameter flywheels with water cooling hopper, exhaust, ignition plus, carburettor and metal fuel tank fitted to hardwood plinth. The model finished in brown paintwork with cast brass engine number plaque to front. Engine length 35cm. Width 18cm. Height 22cm.
A well engineered model of the Edgar T Westbury 'Wyvern' internal combustion side rod stationary engine. Built by the late Mr Duncan Laidlaw of Bristol. The engine of open crank design with eccentric driven fuel pump from crank, side rod run from bevel gear on the crank to valve gear linkage, twin spoked flywheels 6 1/2 inch diameter, oiler, carburettor and metal fuel tank fitted. The model is unpainted and set on an older box plinth with fitted drawer. Engine length 23cm. Width 15cm. Height 19cm excluding plinth.
A well engineered model of an 'over-crank' horizontal internal combustion stationary engine. Possibly built to an Atkinson design by the late Mr Duncan Laidlaw of Bristol. The engine of open crank design having diagonal rods to valves operated from open crank with single cylinder, carburettor, exhaust and fitted ignition plus. The model finished in blacked lined paintwork and set on a hardwood plinth with moulded edge. Length 37cm. Width 17cm. Height 37cm.
A well engineered model of a horizontal internal combustion stationary engine. Built by the late Mr Laidlaw of Bristol. The engine of open crank design with single cylinder having brass and glass oiler, spoked flywheel being 24cm in diameter, carburettor, side rod linked to valve gear and has an ignition plug fitted. The model finished in red paintwork and set on wooden plinth with moulded edge Engine length 36cm. Width 20cm. Height 28cm.
A half size model of an A E & H Robinson & Co of Manchester 'X' type hot tube stationary engine No 187. Built by the late Mr Duncan Laidlaw of Bristol. The engine of open crank design with single cylinder 1 1/2" bore by 1 1/2" stroke, 8 1/2" flywheel, oiler and exhaust. Engine length 28cm. Width 15cm. Height 23cm. The model set on a wooden plinth with moulded edge.Condition Report: There is no compression, the wheel is too easy to spin. Wheel is 22cm diameter Wooden plinth 32cm x 17cmPlease refer to additional images for condition Condition Report Disclaimer
A well engineered model of Alyn Foundry 'RLE' 40cc internal combustion farm petrol barn engine No 135. Built by the late Mr Duncan Laidlaw of Bristol. The engine of open crank design with fitted side rod valve gear linkage, twin 6 1/2" diameter flywheels with water cooling hopper, ignition plug fitted, exhaust, carburettor and metal fuel tank fitted to hardwood plinth. The model finished in black paintwork with cast brass engine number plaque to front and set on wooden plinths with moulded edge. Engine length 35cm. Width 18cm. Height 22cm.
An unusual model of an internal combustion stationary engine, possibly based on the design 'Differential' with single cylinder. Built by the late Mr Duncan Laidlaw of Bristol with disc type flywheel 22cm in diameter and fuel tank set to side. The model is unpainted and set on wooden plinth. Engine length 22cm. Width 23cm. Height 30cm.
A well engineered Stuart Turner No 9 horizontal mill engine. Built by the late Mr Duncan Laidlaw of Bristol, having cylinder 1 1/2 inch bore by 1 1/2 inch stroke, fitted water pump, connection rod with slipper guides, spoked flywheel and set on cast metal sole plate with wooden plinth. Stuart hand-feed pump. Engine length 28cm. The model is unpainted with polished bright work.
A small well engineered model of a horizontal live steam mill engine, having single cylinder lagged in wood with spoked flywheel, disc crank and brass trunk guide set on sole plate with wooden plinth. Engine length 21cm. Width 10cm. Height 10cm.From the collection of the late Mr Duncan Laidlaw of Bristol.
A well engineered model of a horizontal Internal combustion side rod stationary engine. Built by the late Mr Duncan Laidlaw of Bristol being hopper cooled and having twin flywheels 11cm in diameter and being of open crank design. The model is unpainted and stands on wooden plinth. Engine length 25cm. Width 15cm. Height 12cm.
A well engineered model of a Stuart Turner 5a vertical live steam engine, built by the late Mr Duncan Laidlaw of Bristol having single blued metal clad cylinder with two brass drain cocks, spoked flywheel 7 1/2 inches in diameter, eccentric driven steam valve from open crank and ratchet oiler system. The model finished in green paintwork with polished bright-work and set on wooden plinth. Engine length 21cm. Width 22cm. Height 39cm. From the collection of the late Mr Duncan Laidlaw of Bristol.
A model of a Stuart Turner live steam beam engine, built by the late Mr Duncan Laidlaw of Bristol, the turned central column supporting beam with split gun-metal bearings, Watt's parallel motion, single cylinder 1 inch bore by 2 inch stroke with fitted outside steam valve operated from eccentric mounted on the open crank with 7 inch diameter spoked flywheel and rope wheel. The model finished in black paintwork and mounted on wooden plinth. Engine length 34cm. Depth 14cm. Total height 28cm.From the collection of the late Mr Duncan Laidlaw of Bristol.
A well engineered model of an Alyn Foundry 'Sphinx' gas fired 'hit-and-miss' stationary engine No 113, built by the late Mr Duncan Laidlaw of Bristol. The engine having twin 22cm diameter flywheels, water cooled and supported on wooden plinth. Engine length 44cm. Width 21cm. Height 31cm.From the collection of the late Mr Duncan Laidlaw of Bristol.SALEROOM NOTICE:Please note that the Sphinx gas engine kit No 113 was not built by the late Mr Duncan. The kit was originally sold by Alyn Foundry but was brought back to their workshop where it was built and finished by the founder of Alyn Foundry, Graham Corry in 1989/90. Condition Report: This engine has a very good compression.Please see additional images for condition Condition Report Disclaimer
A rare exhibition standard model of a Maudsley Son & Field columnar engine. The original engine was built for the 1862 exhibition at South Kensington. The engine with crank contained in the vertical column with mounted speed governor having wire-rope linkage to crank and fitted with spoked flywheel. This model was researched and built by the late Mr Russ Titford of Essex and is finished in polished bronze and bright-work. Mounted on hardwood plinth. Length 30cm. Width 25cm. Height 46cm.Saleroom Notice:Please note wrong estimate has been put in the printed catalogue. The correct estimate is as showing on the website at £1500 - £2000Condition Report: Measurements(L, W, H):30 x 25 x 46cm Condition Report Disclaimer
A French gilt metal mounted mantel clock, the surmount modelled as a girl holding a nest, 38.5cm high CONDITION REPORT: The clock is half hour striking condition overall good some scratching and other blemishes acceptable with age, base plinth loose, complete with pendulum and key, not in working order .
A silver trophy cup and cover, Goldsmiths & Silversmiths Co. Ltd., London 1938, the cover with ivory knop, the twin-handled cup with inscription for the Londonderry Drag Hunt Point to Point Races 1939, set on an ebonised plinth, 22cm high (excluding plinth), approximately 441gm CONDITION REPORT: Lot contains an element of pre-1947 ivory or other organic material which may be subject to export restrictions.
A pair of Classical style white marble and gilt metal urn form table lamps, with twin mask handles on plinth bases, 32cm high, 61cm including shade, together with a similar lamp, 40cm highCondition report: Minor chips and scratches, predominently to the edges and corners, larger example lacks shade
An early 20th century mahogany collectors cabinet, comprising twenty drawers, each with turned knob handles, raised on plinth base, 47cm wide, 39cm deep, 106cm high, together example, with twelve drawers, raised on bracket, 53cm wide, 36cm deep, 87cm highCondition report: Taller: Top loose but present. Losses to plinth. Back board bowed.Smaller Loss to moulded upper right side. Splits to top veneers. Repair to top.Both with knocks, scuffs and surface marks commensurate with age and use.
An 18th century oak and mahogany crossbanded longcase clock, the arched moonphase dial inscribed ‘High Water at Bristol Key’, by Walborough and Thomas, fitted with subsidiary seconds dial and date aperture, enclosing eight-day four pillar movement striking on a bell, the hood with broken arch pediment, over a plain with lancet door, with pendulum and weights, dial 30cm wide, 215cm high Condition report: Rusting to dial hands and surface marks to dial. Splits and losses to plinth, cracking to veneer. Central finial loose and damaged but present. Top board of hood warped and lifting. Pendulum slightly bent.Dial 300mm wide, 420mm high. Additional photos added. The movement does not sit securely within the case with the hood door open.
-
173444 item(s)/page