SCHOTT, WALTER (1861 Ilsenburg-1938 Berlin) 'Kugelspielerin', nach 1897, Bronze, goldfarben patiniert, Frauenakt beim Wurf einer Kugel (lose, ergänzt), das Gewand im Rücken haltend, gefußt auf runder, ornamental verzierter Plinthe mit dem Künstlersigné 'Walter Schott fec.', verso bez. 'Akt-Ges-Gladenbeck-Berlin'. Auf quadratischem Marmor-Sockel, Gesamthöhe 35 cm, Bronze H 26 cm. Altersspuren, Patina tlw. ber. Klebereste an der Hand, tlw. Grünspan.| SCHOTT, WALTER (1861 Ilsenburg-1938 Berlin) 'ball player', after 1897, Bronze, gold-colored patina, female nude throwing a ball (loose, supplemented), holding the robe behind her back, based on a round, ornamentally decorated plinth with the artist's signé 'Walter Schott fec.', inscribed 'Akt-Ges-Gladenbeck-Berlin' on the reverse '. On a square marble base, total height 35 cm, bronze H 26 cm. Signs of age, patina partly covered. Glue residue on the hand, partly verdigris.
We found 173444 price guide item(s) matching your search
There are 173444 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
173444 item(s)/page
A two over three mahogany chest of drawers, COLLECT ONLY.114Wx 54D x121H. Sturdy, all looks present, no keys, plinth is part of bottom drawer, right side is rough to the touch and faded, would benefit from a light sand and polish. On top both rear corners cut off, some veneer loss to edges and veneer repair, split to veneer on 1 side.
Francis Agar of York - 30hr oak longcase c1820, with a swans necked pediment and brass paterie, break arch hood door beneath with reeded pilasters, trunk with canted corners and a long trunk door with a curved top, plinth with a raised panel on bracket feet, painted dial with Arabic numerals, spandrels and a depiction of flowers to the break arch, with steel hands and calendar dial, dial pinned directly to a chain driven countwheel striking movement, striking the hours on a bell. With weight and pendulum.Dimensions: Height: 230cm Length/Width: 52cm Depth/Diameter: 25cm
Edmund Sagar of Skipton - 18th century oak 30hr long case clock c 1790, with a flat top and double cornice, deep frieze and square hood door, detached reeded pilasters with wooden capitals, trunk with reeded quarter columns and a long ogee topped door, on a rectangular plinth with bracket feet, brass dial with a well engraved slivered centre, calendar dial and chapter ring, chapter with Roman numerals and five minute Arabic's, dial pinned to a chain driven count wheel striking movement, striking the hours on a bell. With pendulum and weight.Dimensions: Height: 210cm Length/Width: 44cm Depth/Diameter: 23cmCondition Report:Pendulum suspension missing
Oak longcase clock c1790 - with a pagoda top and three wooden gesso finials, hood with glazed side panels, square hood door and attached pilasters, slim trunk with a long flat topped door, plinth with deep decorative skirting, square painted dial with spandrels, Roman numerals and five minute Arabic's, seconds dial and calendar aperture, dial inscribed Geo Suggate, Halesworth, with a rope driven countwheel 30hr birdcage movement striking the hours on a bell. With weight and pendulum. Dimensions: Height: 220cm Length/Width: 44cm Depth/Diameter: 23cm
19th century - 30hr oak longcase clock, dial inscribed Coulton Skelton, Malton, with a swans neck pediment, break arch door and turned pilasters, trunk with a long door on a short plinth, fully painted dial with roman numerals, minute track, calendar dial and brass hands, dial pinned to a rope driven count wheel movement striking the hours on a bell. With weight and pendulum.Dimensions: Height: 210cm Length/Width: 56cm Depth/Diameter: 30cm
Late 19th century mahogany twin pedestal desk, rectangular top with leather inset writing surface, fitted with central frieze drawer flanked by eight graduating drawers, lower moulded edge over plinth base and castors, each pedestal fitted with faux cupboards to the reverseDimensions: Height: 79cm Length/Width: 124cm Depth/Diameter: 81cm
Hewett of Marlboro - 18th century oak cased 8-day longcase clock c1760, with a caddy topped pediment and blind fret beneath, square hood door with attached pilasters, long trunk case with a flat topped door on a rectangular plinth with bracket feet, brass dial with a silver chapter ring and engraved silvered centre, seconds dial and calendar aperture, with Roman numerals, minute track, five minute Arabic's and steel hands, rack striking movement, striking the hours on a cast bell. With pendulum and two weights. George Hewitt (I) and (II) are recorded as working in Marlborough (Wilts) 1720-95Dimensions: Height: 230cm Length/Width: 44cm Depth/Diameter: 25cm
William Kent of Saffron Walden - 30hr oak longcase c1760, with a flat topped pediment and broad cornice, square hood door flanked by two pilasters with brass capitals, long trunk door with a crested top, square plinth with applied skirting, single handed brass dial with spandrels, brass chapter ring with quarter hour track and engraved dial centre, rope driven birdcage movement with count wheel striking. With weight and pendulum.Dimensions: Height: 190cm Length/Width: 43cm Depth/Diameter: 23cm
Edwardian Revival inlaid mahogany breakfront bookcase on cupboard, the projecting dentil cornice over three astragal glazed doors enclosing nine adjustable shelves, moulded top over three drawers and three panelled cupboards, the cupboard doors with circular inlaid panels, satinwood banding throughout, moulded plinth base, retailed by Tomlinson's Furniture Warehouse Dimensions: Height: 213cm Length/Width: 194cm Depth/Diameter: 43cm
20th century - mahogany cased 30hr Longcase clock, with a swans neck pediment and brass finials, fully glazed trunk door on a square plinth with applied moulding, brass dial and chapter with Roman numerals, engraving and working moon dial, German, two train chain /weight driven movement striking the hours and half hours on a single bell. With weights and Pendulum. Dimensions: Height: 190cm Length/Width: 38cm Depth/Diameter: 24cm
Scurr of Thirsk - oak cased 30hr longcase clock c1790, with a swans neck pediment and three wooden gesso finials, break arch door beneath flanked by two turned pilasters, trunk with canted corners and a long wavy topped door, on a square plinth with bracket feet, painted dial with Roman numerals, minute track, five minute Arabic's, calendar aperture and matching steel hands, floral spandrels bordered with gesso decoration, chain driven count wheel movement striking the hours on a cast bell.With weight and pendulum. Dimensions: Height: 230cm Length/Width: 46cm Depth/Diameter: 22cm
William Semcock of Warrington - Mid 19th century 8-day mahogany longcase clcok c1860, with a swans necked pediment and central ball and eagle finial, deep frieze with a square hood door and reeded pilasters beneath, broad trunk with recessed cluster colums and a triple spire door, plinth with inlay, canted corners and decorative skirting, fully painted dial with replicated cottages to the spandrels, Roman numerals and minute track, seconds and calendar dials with non-matching stamped brass hands, dial pinned via a falseplate to an eight-day rack striking movement, striking the hours on a bell. With weights, pendulum and winding key. Dimensions: Height: 232cm Length/Width: 52cm Depth/Diameter: 25cm
William Terry of Bedale - 30hr pine cased longcase clock c 1770, with a deep broken pediment and dog tooth moulding, square hood door with attached pilasters, long trunk door with a wavy top, plinth with applied skirting and feet, brass dial with silvered chapter ring and dial centre, centre with finely engraved decoration, calendar aperture and dummy winding holes, chapter engraved with roman numerals and five minute Arabic's, dial pinned to a rope driven count wheel striking movement. With pendulum and weight.William Terry, father (I) and son (II) were prolific 18th century Yorkshire clockmakers, recorded as working predominantly in Bedale but also other provincial towns in North Yorkshire.Dimensions: Height: 220cm Length/Width: 45cm Depth/Diameter: 25cm
John Richardson of Bubwith (Nr Selby, Yorkshire) - 8-day oak and mahogany longcase clock c1820, with a swans neck pediment, brass patera and a turned wooden finial, break arch hood door, trunk with canted corners and a short curve topped door, on a square plinth with a recessed panel on shaped feet, painted dial with a depiction of fruit to the arch and geometric spandrels, Arabic numerals, calendar aperture and seconds dial, steel hands and brass seconds hand, rack striking movement striking the hours on a cast bell. With weights and pendulum.Dimensions: Height: 220cm Length/Width: 53cm Depth/Diameter: 23cm
A very well engineered stationary live steam model Beam Engine, built by E.J.Roberts of Knodishall Suffolk, comprising wooden clad vertical cylinder, with displacement lubricator, working ball governor, powering a large 21cm spoked fly wheel, Watts Parallel Motion Work, model is free running and fully raised on wooden plinth with makers plaque, height 34cmIn excellent condition with no apparent faults or defects. Appears free running, but we are not able to test.Can be posted, but no liability is accepted for damage to delicate details.
Bing Circa 1920 spirit fired vertical steam engine comprising vertical boiler with single fixed cylinder engine, with slip eccentric, filler cap, whistle, steam and exhaust ports, powering a 3.5 inch spoked fly wheel, hand painted black and red cast metal base, fully raised on wooden plinth, maximum height including base 33cm
A very well engineered gauge 1 spirit fired live steam locomotive and tender comprising of 4-6-0 wheel configuration with 6-wheel tender, hand painted in dark green with LMS livery and black main boiler section, easy access to backhead controls comprising of sight gauge, regulator, draincocks, all powered by a six wick spirit burner, model is built to a good standard, raised on an oak display plinthGauge 1 example.Model is in good clean condition.Length 59cm.Hasn’t been steamed in a number of years.Free running and model is not seized.
A very well made wooden and balsawood kit built model of a Vosper RAF launch hand painted in grey and black with green deck and a removable superstructure to reveal twin powered can Permax motors powering twin propellers, fitted with rudder servo and battery compartment, model is raised on carry-plinth, length 89cm
Billings Boat 1/75th scale kit built model of a Smit Rotterdam Tug Boat, well-made example and named Smit Duitsland, plastic injection moulded hull with plastic removable superstructure, to reveal Radio Controlled components, well-made example raised on wooden display plinth and with carry case, length 85cm
A very well executed large-scale model by JH Jepson kit built and later adapted model of Hannibal at the Battle of Ticinus 218BC, Consul Scipio defeated, comprising of elephant with archer and spearman unit load, fully handpainted and constructed model raised on heavy wooden display plinth, plinth dimensions 83cm x 50cm, max height of model 70cm, model is of exhibition quality (un-postable item, must be collected by buyer)
A very well-executed static display model of St George and the Dragon, hand painted kit built model, possibly by JH Jepson, dated 1992, hand signed to rear left, raised on wooden plinth with name plaque to read St George & The Dragon, constructed from resin, plastic, and wooden components, max height 40cm, width of plinth 45cm, depth 36cm, exhibition quality
-
173444 item(s)/page