We found 173487 price guide item(s) matching your search
There are 173487 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
173487 item(s)/page
From Reeves Casting's and built to Edgar T Westbury Designs, stationary single cylinder horizontal mill engine titled "Unicorn", comprising of single horizontal cylinder with 3/4" bore x 1 1/4" stroke, spoked flywheel to measure 5 1/4", fitted water pump and working governor with gear and linkage to steam shut off valve, free running example, housed in a glazed display case with wooden plinth, plaque to read Refurbished 2017 by David Bull Wisbech
Chiltern Model Steam (CMS) stationary horizontal live steam mill engine, wooden clad single cylinder example, eccentric driven slide valve, hand painted in red wth exposed brass components, raised on wooden display plinth with perspex display case, length 21cm, Maker's plaque to read David Bull Wisbech 2017
A very well-engineered possibly kit built model of a stationary vertical steam engine, comprising of single vertical cylinder with slip eccentric, to be run on compressed air, powering a 4.5" spoked flywheel raised on 4 pillars, hand-painted in green and housed on a raised wooden display plinth, free running example with display case, height 26cm
A very well engineered gauge 1 spirit fired live steam locomotive and tender comprising of 4-6-0 wheel configuration with 6-wheel tender, hand painted in dark green with LMS livery and black main boiler section, easy access to backhead controls comprising of sight gauge, regulator, draincocks, all powered by a six wick spirit burner, model is built to a good standard, raised on an oak display plinthGauge 1 example. Model is in good clean condition. Length 59cm. Hasn’t been steamed in a number of years.Free running and model is not seized.
A very well engineered kit built model of a Horizontal Beam Engine, hand painted in green, free running example comprising of vertical wooden clad single cylinder engine, with slip eccentric, powering a large spoked 6.5 inch fly wheel and opposed 2 1/4" take off wheel, raised on wooden plinth. height 27cm
Carette, Circa 1911, Model 694/2 stationary horizontal hot air engine, comprising of cast iron based single-cylinder engine with heat exchange powering a 9cm spoked fly wheel and further take off, with associated reproduction chimney, all fully housed on tinplate and wooden based display plinth, length including base 30mc, maximum height 29cm
Stuart Turner, No.10 vertical steam engine comprising of single vertical cylinder suspended on a single A frame, with cast in exhaust and steam ports, the cylinder powers a 3 inch flywheel with further take off point, fitted with reverse lever, finished in bright red paintwork, free running, well engineered example, raised on circular plinth with glass dome, makers plaque to read R.A.Fella 1976, maximum height including dome 22cm
A Victorian mahogany longcase clock by Jason Rankin, Kilmarnock, the hood with pierced foliate cresting above arched door, with circular sound lenticule's above long door with pierced mounts, on plinth base, with turned feet, the painted dial with roman numeral chapter ring, and two subsidiary dials, the corner spandrels painted with figures representing the four home countries, with a scene titled Mary's escape to the arch, with two weights, winder and pendulum, the clock approx. 225cm high
Dinky Supertoys No. 986 Mighty Antar low loader with a propeller, comprising a red tractor unit with grey low loader trailer and matching grey Supertoys hubs, with pallet and bronze plastic propeller load with "Scimitar" decal, in the original blue & white striped picture lift-off lid box with plinth and packing piece in excellent-near mint condition in a very good - excellent box.
Wrenn W2406 (Limited Edition) 2-6-4 BR lined black Standard Class 4 Tank No.80120 complete with certificate No.85 along with plaque, plinth, length of rail and instruction booklet, very minor damage to the number 8 on the smokebox transfer, condition Near Mint in Good Plus box but base stamp is hard to read but with numbers readable is 3729.
Wrenn W2401 (Limited Edition) 4-6-2 LMS maroon Princess Coronation Class No.6223 "Princess Alice" complete with certificate No.320, plaque, plinth and length of rail, 2 small nicks in the lining to left side running plate, small paint loss to right side front buffer head, tender buffer heads are unpainted, small paint chip to tender rear top right side, small gap in boiler band at left side to cab front, condition Excellent in Good Plus to Excellent box complete with instruction booklet and base stamped 07940.
Wrenn W2402 (Limited Edition) 4-6-2 BR green rebuilt Battle of Britain Class Loco No.34090 "Sir Eustace Missenden" complete with certificate No.164, plinth with plaque and length of rail attached, condition Excellent Plus to Near Mint in reproduction replacement box base but lid is original and is generally Good.
Hornby (China) R3612 Limited Edition "World Speed Record 80th Anniversary Pack" consisting of a 4-6-2 Loco and Tender LNER blue A4 Class "Mallard" No.4468. With 18-carat gold plated parts, wooden plinth with gold plated rail and commemorative pack all contained in a presentation box to celebrate the 80th Anniversary 1938-2018 of Steam Traction World Speed Record. Includes certificate No.1129 of 1260 produced. Mint boxed.
Wrenn W2411 (Limited Edition) 4-6-2 BR lined blue Streamlined Merchant Navy Class Loco No.35003 "Royal Mail" complete with certificate No.11, plinth with plaque and length of rail attached, glue residue around both nameplates to side of loco, some rusting to 2 tender axles, apart from glue residue loco is Excellent in generally Good to Good Plus complete with instructions and base stamped 901045.
Wrenn W2409 (Limited Edition) 2-8-0 BR black 8F Class Loco No.48102 complete with certificate No.128 and plinth but plaque and length of rail are missing, some discolouring to handrails on loco, condition Excellent to Excellent Plus in generally Good box but with scuff marks to lid and base stamped 89 521.
John Maltby (British, 1936-2020) Seated figure holding a baby, painted stoneware sculptural work, figure mounted to integral plinth base, signed ‘John Maltby’ to base with impressed seal ‘M’ mark to reverse. Height 25cm. Brought up in Cleethorpes John Maltby was a distinguished English sculptor and potter and has exhibited his work worldwide.
A collection of 20th century stone figures to include; A soapstone bird with snake in mouth, approx. 9.5cm high, a small nephrite carved figure of two fish on wooden plinth, approx. 4.5cm high, a small jadeite carved figure of a bird (broken feet and chips) and along with a small jadeite carved bowl with leaf detailing to sides.
![Loading...](/content/bs/images/ajax-loader.gif)
-
173487 item(s)/page