We found 173444 price guide item(s) matching your search

Refine your search

Year

Filter by Price Range
  • List
  • Grid
  • 173444 item(s)
    /page

Lot 1

Good Quality Late Victorian Satin Walnut Chest of 2 short and 3 long drawers on plinth base

Lot 1

C19th Mahogany Scottish Chest of 4 long drawers with carved stiles on plinth base with square supports in need of some restoration

Lot 1

Charles Vyse, Chelsea, Earthenware Figure of a lady carrying child, basket and bundle of encrusted flowers, on round base, circa 1923 on hexagonal wooden plinth, 26.5cm high overall

Lot 1

Charles Vyse, Chelsea, Earthenware Figure of an elderly lady carrying basket of vegetables "Saturday Night", circa 1926 on square ebonised plinth, 26cm high

Lot 1

Charles Vyse, Chelsea, Earthenware figure of a lady carrying basket and bundle of encrusted flowers "Chrysanthemums", circa 1927 on square ebonised plinth, 28cm high overall

Lot 1

Charles Vyse, Chelsea, Earthenware Figure of a lady carrying box and bundle of encrusted flowers "The Shawl", circa 1927 on square ebonised plinth, 28.5cm high

Lot 1

Good Quality Victorian Mahogany Twin Pedestal Sideboard, with Arched Moulded Doors on Plinth Base, central drawer

Lot 1

Good Quality Edwardian Walnut Satinwood Banded 2 Door Bookcase with 2 interior shelves on plinth base with squat cabriole supports

Lot 1

Good Quality Tall Chest of 2 Short and 3 Long Drawers on Plinth Base

Lot 1

Late C19th Walnut 2 Door Side Cabinet with single frieze drawer over with plinth base

Lot 1

Good Quality Victorian Mahogany Bun Handled Chest with 2 short and 4 long drawers on plinth base with rounded corners

Lot 1

Good Quality Late Victorian Mahogany Marquetry Inlaid Triple Section Wardrobe with Pair of Mirrored Bevelled Glass Doors to a Centre Section with Marquetry Inlaid Door and Pull out slides above two short drawers on plinth base with Satinwood Banded Cornice.

Lot 1

Ercol Style Oak Sideboard on plinth base with 4 linen fold panel cupboard doors under 4 moulded drawers with raised super structure of a long hutch, 2 glazed leaded light drawers with central fitted shelf unit

Lot 1

Good Quality Mahogany 2 Door Chiffonier on plinth base with 2 frieze drawers, small up-stand to rear

Lot 1

Good Quality Mid C19th Victorian Mahogany Wardrobe with 2 side panelled doors, central section with 3 long bead moulded drawers with oval mirrored door over, interior fitted for hanging and shelves, on plinth base with cornice

Lot 1

Mid C19th Mahogany Rounded Corner Chest with 2 short and 3 graduated drawers, plinth base in need of restoration

Lot 1

Good Mid C19th Mahogany Chiffonier Bookcase, twin cupboard doors on plinth base, single frieze drawer, 2 glazed panelled doors over (missing cornice)

Lot 1

Good 1950's Walnut Bow Fronted Side Board/Bar by A Turnidge fitted with bottled wells, lemon squeezers, cocktail stick holders etc the rear with 2 glass sliding doors, illuminated interior shelves with unfolding bar to top to double the size the hinge sides unfold to support the top with pair of opening doors to the front on casters with black plinth base

Lot 1

Good early Victorian mahogany mantel clock, the stepped pediment above a cream enamel dial with Roman numerals in black and marked for Riddle of Aberdeen above a plinth base section, the single fusee movement visible through glazed side apertures, 18in (45.8cm) high

Lot 1

Mid Victorian barrel fronted chest of drawers, the three frieze drawers over three long graduated drawers flanked by carved side detail all on a plinth base, 46 1/2in (118.2cm)

Lot 1

A Mamod toy steam plant, the horizontal boiler with sight glass, whistle, spirit burner tray and being linked to oscillating horizontal mill engine on metal plinth

Lot 1

A Doll toy steam plant, the horizontal boiler on imitation brick plinth linked to oscillating horizontal mill engine, chimney missing

Lot 1

A German model steam plant possibly by Doll, no makers mark, the horizontal boiler with sight glass, pressure gauge, drain cock and safety valve, mounted on simulated brickwork plinth with matching chimney and linked to open crank horizontal steam engine with speed governor and generator on metal plinth. Some renovation required. Plinth 30cm x 26cm

Lot 1

A Mamod toy steam plant, the brass horizontal boiler with whistle, pressure gauge and linked to twin oscillating horizontal steam engine with central spoked flywheel. The whole on red metal plinth. 26cm x 24cm

Lot 1

A fine Wilesco D32 steam plant, the horizontal boiler with plated finish and mounted on simulated brickwork plinth, with railed gallery, chimney, pressure gauge and whistle. The boiler drives a pair of horizontal mill engines linked to small generator, the whole with control panel and set on rectangular metal plinth 52cm x 40cm

Lot 1

A Jensen live steam plant, style number 75, the horizontal boiler with spirit burner and whistle, linked to mill engine on metal plinth, 29cm x 26cm

Lot 1

A Weeden live steam plant, with vertical boiler linked to oscillating mill engine with speed governor on metal plinth, 20cm x 10cm

Lot 1

A vacuum engine 'Flame Eater' style model hot air engine, with disc crank, chrome plated flywheel and brass machined cylinder, mounted on ebonized and polished mahogany plinth. 9cm high, 20cm long. kit by Solar Engines of Phoenix, Arizona

Lot 1

A Stuart Turner model of a steam hammer, with release lever and brass lubricating chamber, set on polished oak plinth

Lot 1

A full size 'Geryk' vacuum pump, of cast metal construction with hand operated winding wheel, grass-hopper style acting and mounted on plinth with maker plate No 75666. maker Pulsometer Engineering Co. Ltd., London and Reading. 20 1/2in high

Lot 1

A miniature model of a Rider Ericsson vertical hot air pumping engine, by Solar Engines of Phoenix, Arizona, on polished mahogany plinth. 21cm high

Lot 1

A Model of a Murray's hypocycloidal engine, made by and to the design of Anthony Mount in 1996. The engine formed from 'A' frames and of over-type design with spoked flywheel, eccentric driven steam valve and mounted on oak plinth with brass makers plaque. 31cm high.

Lot 1

A model of an 'A' framed over-crank steam engine, by Anthony Mount with eccentric driven steam valve and water pump, central spoked flywheel supported on pierced framework with circular oak plinth, 25cm high.

Lot 1

A model of a Robinson hot air engine, built to 1/4 scale from castings and parts supplied by Invica Models, spoke flywheel, disc crank, oiler, small gas burner. The engine on circular sole plate with three feet mounted on oval polished mahogany plinth with display cabinet.

Lot 1

A Stuart Turner single Victoria mill engine, 1in bore x 2in stroke, 7in spoked flywheel, fitted speed governor and displacement oiler. The model finished in green paintwork with polished bright work and mounted on oak and pine plinth. 42cm x 18cm

Lot 1

A Stuart Turner 'Sirius' steam engine, with brass displacement oiler, disc flywheel, 1 in bore x 1 in stroke. The model finished in dark green paintwork with polished brightwork on wooden plinth

Lot 1

An M E model beam engine, supported on turned central column with fitted water pump, inside steam valve with brass oiler to single cylinder, steam inlet valve with shut off linkage to speed governer with bevel gears to crank, eccentric driven steam valve and 9 1/2in spoked flywheel. The model finished in red and green paintwork with polished brightwork on wooden plinth. 45cm x 22cm

Lot 1

A finely engineered Stuart Turner steam hammer, built by Mr D.J. Moir and finished in dark grey paintwork with polished brightwork. 10 1/2in high. And mounted on mahogany plinth

Lot 1

A finely engineered Stuart Turner feed pump, built by Mr D.J.Moir finished in black and red paintwork with polished brightwork. 6 1/4in long and mounted on polished wooden plinth

Lot 1

A Stuart Turner S50 mill engine, with steel lagged cylinder, cross-head guides, balanced crank and 3 5/8in spoked flywheel. The model finished in black and red paintwork with polished brightwork and mounted on an oak plinth

Lot 1

A brass model beam engine, supported on turned central column, crank with spoked flywheel and eccentric driven steam valve, vertical cylinder. The whole mounted on brass plinth. 4 1/2in high

Lot 1

A fine quality pair of Victorian bronze effect figures, of Persius and Diana, raised on a neo classical plinth. Unsigned. 33" high.

Lot 1

A fine quality cold painted bronze and ivory figure of an Arab serving boy holding a tray of drinking vessels. Raised on a green onyx plinth. Unsigned. 7" high

Lot 1

A Victorian 18th century style oak effect mantle clock, the pedimented top above Ionic column supports. Raised on a shaped plinth. Probably Continental. 13 1/2" high.

Lot 1

A late 19th century mahogany cased mantle clock, retailed by Russells Ltd, 18 Church St, Liverpool. The arched top case with urn shaped finials above a round silvered dial with carved frieze surround. Moulded plinth raised on squat cabriole feet. Westminster Chime. 12" high.

Lot 1

An early 19th century Staffordshire figure, depicting a biblical character feeding blackbirds whilst sitting on a green rocky landscape with stream below. Square burgundy coloured plinth. (Damage to hand and birds' tails). 9" high.

Lot 1

A Royal Worcester figure of a Suffolk stallion by Doris Lindner. Dated 1969. No. 631. With original certificate, and plinth. 9" high.

Lot 1

A Royal Worcester porcelain model of white stylised flowers on a mossy rock style plinth. Probably by Freda Doughty for decorating her American bird Series. Unmarked. Colour reference model. 17" high.

Lot 1

A fine quality Georgian mahogany bookcase on cabinet. The moulded cornice above plain column supports flanking astragal glazed doors. Twin panelled frame mahogany doors below with ebony edge mouldings. Raised on a stepped rectangular plinth. 53" x 23" x 96".

Lot 1

A late Victorian hazel pine compactum wardrobe, the neo classical style pediments with shell and leaf work panels, dental moulded cornice below. Single panelled glazed doors flanking a central cupboard with glazed doors. Twin doors below above a recessed shelf with two short and three long drawers below. Raised on a shaped plinth. 76" x 22" x 89".

Lot 1

An Edwardian hazel pine marble top wash stand, a central bevelled mirror with architectural arch top above a tiled back frieze, the base with a central drawer and 2 panel doors flanking. Raised on a shaped plinth. 48" x 24" x 68".

Lot 1

A 19th Century carved oak buffet sideboard, the plain top with a carved moulded edge supported on Gothic style columns with carved panel doors below with lion mask cartouches. Raised on a square plinth with carved moulded top. 20" x 40"

Lot 1

A late Victorian walnut pedestal desk, the solid moulded edge top above two short and one long drawer. Six graduated drawers in pedestals, raised on a square plinth. 48" x 23" x 30".

Lot 1

A very fine quality Victorian burr walnut veneered Davenport desk, the top rest hinged to reveal fitted pen trays and ink compartments. The fall hinged in its entirety to reveal a flat desk section with twin fitted drawers to rear. Twin panelled doors below flanked by scrolling cabriole supports. Raised on a plain plinth with casters below. 24" x 22" x 39".

Lot 1

A Victorian bur walnut veneered trumpet form workbox, raised on a baluster form turned support with quatrefoil plinth below raised on lion paw feet with casters. 17" x 30" x 29". (see lot 760 for illustration)

Lot 1

A Sheraton style mahogany marble top bedside cupboard. Single panel door. Raised on a square plinth. 15" x 14 1/2" x 30".

Lot 1

A good quality Victorian walnut veneered credenza, the serpentine form marble top with a moulded edge above 3 doors. The whole raised on a serpentine form square plinth. Fine quality mirror back with carved sea scroll and foliate central cartouche. 60" x 16" x 63"

Lot 1

AN ART DECO SPELTER FIGURE, modelled as a gentleman bowling, painted black and raised on square alabaster plinth, 10 1/4" high

Lot 1

A PINE FIRE SURROUND the moulded and dentil oblong shelf over blind fret trellis frieze, cushion shaped jambs with beading, on plinth, 19th century, 59" wide, 53" high

Lot 1

A VICTORIAN CAST IRON URN of half fluted campana form with flared rim, fluted socle, on associated square plinth, with moulded base, 49 1/2" high, 30" wide

Loading...Loading...
  • 173444 item(s)
    /page

Recently Viewed Lots