We found 89918 price guide item(s) matching your search

A late 18th/early 19th century short curved sword, with original blue and gilt shaped blade, engraved with floral sprays, shield and spears, with the insignia 'GR' beneath a crown, with pierced shaped guard, checkered ivory grip and lion head pommel, complete with leather and brass bound scabbard, length of blade approx 40cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. A small section of ivory has been replaced to the grip. There are stress cracks to the ivory commensurate with age. General tarnishing to the metalwork throughout. The chain is a replacement. Pitting to the blade which can clearly be seen in the images. General surface wear to the scabbard.

A 19th century light infantry officer's spadroon, with wirework grip, embossed pommel, hinged guard and engraved tapering blade in partial leather scabbard, length of blade 78cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Very slightly misshaped pommel, surface wear with light general knocks, pitted unsharpened blade, the end section of the leather scabbard is missing.

A 1796 pattern light cavalry sabre, with ribbed grip, brass knuckle guard and curved blade, stamped 'Osborn' to the blade back, within all metal brass mounted scabbard, length of blade 76cm. CONDITION REPORT: Grip: some paint worn off, minor pitting, minor wear to the guard. No movement. Historic repair to the scabbard tip. Surface wear to the grip and brass work as you would expect, pitting throughout the blade, heavier in some sections, a few dents to the scabbard and pins holding the end section are missing. PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service.

A 1796 pattern heavy cavalry sword, with spear point, with wooden grip, pierced guard and blade stamped 'Osborn' to the blade back, with metal scabbard, length of blade 85cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. There has been a spliced section of wood where it meets the pommel repaired some time ago. The remaining wood is also cracked and shows signs of age. Heavily pitted steel to the guard and hilt, pitted blade including many nicks along the blade edge. The scabbard is stamped 'Osborn & Co Birmingham' and has some pitting, otherwise appears good with no further obvious faults, damage or restoration.

A 1796 pattern infantry officer's sword, with wirework grip, floral embossed pommel and hinged guard stamped 'B.K.1278R.L.3' and with tapering blade stamped 'GEBR.Weyersberg, Solingen', with metal scabbard, length of blade 80.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. General surface wear to the metal work as you would expect. The hinge is slightly loose on the side guard and will not quite stay in the upright position. Surface scratches here also. Some pitting to the blade and scabbard.

A 1796 pattern light cavalry sabre, with ribbed wooden grip, plain knuckle guard and curved blade, with scabbard, length of blade 82cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Heavy surface wear to the wooden grip and an old repair spliced section where it meets the pommel. Heavy pitting and wear throughout the metalwork. Pitting to the blade with a few nicks and chips to the blade edge. Heavy pitting and small dents to the scabbard.

A 1796 pattern light cavalry sabre, with leather ribbed grip, P-guard and curved blade in metal scabbard, length of blade 82.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Significant wear to the leather grip which is missing in parts. Pitting and wear to the knuckle guard. A greasy residue and pitting to the blade throughout. Heavy surface pitting and minor dents to the scabbard.

A 1796 light cavalry sabre, with wooden grip, P-shaped knuckle guard and curved blade in metal scabbard, length of blade 81cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. The grip is all missing to the grip and the section where it meets the pommel is also broken off. Heavy pitting to the knuckle guard. Heavy pitting to the blade with a few nicks to the blade edge and pitting to the scabbard.

A 1796 pattern light cavalry sabre, with moulded grip, P-shaped knuckle guard, no.82, inscribed '8.TP.2', with curved blade and stamped to the blade back 'S&R', and with metal scabbard, length of blade 81cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Surface wear to the grip and pitting and surface wear to the metal mounts, light pitting to the blade with a few very small nicks to the blade edge. Heavy pitting to the solid metal scabbard.

A 1796 pattern light infantry sword, with wirework ribbed grip, P-shaped knuckle guard, the curved blade with metal scabbard, length of blade 81.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Heavy wear and old repairs to the grip, some wirework missing, some filler has been used in the past. Heavy wear to the metalwork and pitting to the blade with a few small nicks to the blade edge. The end of the scabbard also has had a repair and with heavy pitting throughout.

A Victorian light infantry sabre, with wirework shagreen grip, pierced knuckle guard and engraved shaped blade inscribed 'Firmin & Sons Ltd, 153 Strand London', with metal scabbard, length of blade 83cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. The wirework is lifting slightly where is meets the back of the hilt. Some lacquering or paint residue to the pommel and guard, pitted blade with a greased sticky finish and a couple of nicks to the blade and the scabbard with pitting also.

A Victorian light cavalry sabre, with wirework shagreen grip, pierced knuckle guard with hinged side guard and engraved blade, with brass scabbard, length of blade 81cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Tarnishing to the metal mounts, slight lifting to the wirework grip in parts and discolouration to the shagreen, pitting to the blade slightly obscuring the decoration. The brass scabbard has a couple of dents and a noticeable repair around the very end section where it meets the sword.

A Victorian light infantry sword, with wirework shagreen grip, pierced knuckle guard and engraved blade inscribed 'W. Jones & Co, 236 Regent St, London', with metal scabbard, length of blade 81.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. The edge of the shagreen where it meets the frame is worn in parts, also some tarnishing and sticky residue to the metal mounts. Some light pitting to the blade, light pitting to the scabbard with two holes to the upper section. The scabbard is also inscribed 'F. Holme First L.R.V.'. Replaced section on the end of the scabbard where it meets the sword. This sword is neither painted or plated.

A late Victorian light infantry officer's dress sword, with wirework shagreen grip, pierced knuckle guard and engraved blade, in metal scabbard, length of blade 82cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. A black finish and heavily tarnished guard and pommel. Heavy wear to the shagreen and losses where it meets the back of the hilt. Pitting throughout the blade obscuring some of the decoration, noticeably worse to the top end and some heavier degradation to the blade, heavy pitting to the scabbard.

A late 19th century military issue heavy cavalry sabre, with checkered leather grip, pierced guard and shaped blade, bearing broad arrow mark and with metal scabbard, length of blade 89cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Surface scratches and wear to the leather grip, rubbed in parts obscuring the decoration, a black lacquer coating on the guard, pitting to the blade with nicks on the blade edge and also pitting throughout on the scabbard.

A military issue British heavy cavalry sabre, with checkered leather grip, pierced knuckle guard and slightly curved blade, stamped 'Width' beneath broad arrows, 'YC, BR28' beneath and crown and with various further stamps, and metal scabbard, length of blade 85cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Heavy surface wear to the leather grip obscuring decoration in parts. A few knocks and dents to the guard with surface pitting and wear. Light pitting to the blade moving to more heavy pitting towards the top with the very end tip rounded off. Heavy pitting to the scabbard with a few small dents.

An early to mid-19th century light cavalry sabre, with wirework shagreen grip, pierced knuckle guard and engraved blade indistinctly inscribed, stamped with 'L' and with pipe back, with metal scabbard, length of blade 89.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. General surface wear to the metal and a few knocks and bruises, some discolouration to the shagreen and wear where the wirework has rubbed. Light pitting to the blade slightly obscuring the decoration with a few nicks to the blade edge. A few small dents and pitting to the scabbard.

A late 19th/early 20th century officer's sword, with wirework shagreen grip, pierced knuckle guard and steel blade, housed in a leather scabbard, length of blade 90cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some damage to the shagreen where it raises to the pommel, a small area missing and a small area to be repaired. Pitting and wear throughout to the metalwork, some pitting to the blade. The scabbard is present but has a large amount of surface damage and scratches.

A 19th century officer's sabre, with shagreen grip, pierced knuckle guard and curved blade with traces of indistinct inscription, housed in a metal scabbard, length of blade 89cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. The wirework is missing from the grip as is the end section where it meets the guard. Wear to the brass throughout with the first of the three bar guard missing and filed down. Pitting to the blade and a few tiny chips to the blade. Pitting to the scabbard.

A 19th century Grenadier Guards officer's sword, with wirework shagreen grip, pierced knuckle guard decorated with a regimental cipher and with tapering blade set with circular proof marks, stamped 'J.C.W.' and in metal scabbard, length of blade 86cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Pitting and some wear to the metal work, a small split to the shagreen but all present, general light pitting and surface wear to the blade with a couple of small nicks and light pitting to the scabbard. Also bearing the leather knot. Numbered 14031, stamped 5 top of hilt.

A William IV pipe back sabre, with shagreen wirework grip, pierced knuckle guard with hinged side guard and curved blade housed in a leather metal mounted partial scabbard, length of blade 81cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Crude glue repair to the shagreen where areas have been repaired and still some losses, the wirework appears to be replaced. Surface wear to the metalwork and also a split through the metal frame itself, also rather crude fitting where it meets the blade indicating a possible alteration. Heavy pitting to the blade and with a third of the scabbard missing.

A William IV officer's sabre, with wirework shagreen grip, pierced knuckle guard with hinged side and pipe back curved blade engraved 'Prosser, Manufacturer to the King, London', with base section brass cap of scabbard remaining only, length 81.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Light wear to the shagreen, re-pinned hinged section, general surface wear to the metal, pitted blade heavily pitted in parts, scabbard as detailed.

An early 20th century sabre, with wirework ebonised grip, P-shaped guard and slightly curved blade within metal scabbard, unnamed, length of blade 83cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some pitting to the hilt and guard, wirework is missing in one area to the grip and loose in others, the blade overall is in good condition with some light surface scratches to the scabbard.

A 1st Volunteer Battalion Gloucestershire Regiment band sword, with one piece cast metal crossguard with clover leaf ends and central strung bugle cartouche, the edge of grip stamped '1st V.B.G.R. 39', the blade stamped 'E. Thurkle, Soho, London', and the leather and metal mounted scabbard inscribed '1st. V.B.G.R. 49', length of blade 48cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Pitting to the cast metal cross guard and grip with surface wear, pitting to the blade, surface wear to the leather scabbard with a few dents and surface scratches to the metal mounts.

A William IV pipe back sabre, with wirework shagreen grip, pierced knuckle guard and slightly curved blade, housed within a metal scabbard, length of blade 82cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Retaining a wrapped ribbon but lacking knot, tarnishing and pitting to the metalwork, the shagreen grip appears ok with only minor surface wear, the hinged sidearm works well, light pitting to the blade. The scabbard has had several crude repairs which are clearly home-made repairs.

A Victorian rifle brigade sabre, with wirework shagreen grip, pierced knuckle guard with regimental cipher and engraved blade inscribed 'S. Isaac, Campbell & Co, 77 Jermyn St. London', in metal scabbard, length of blade 82cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. General surface wear to the metalwork, replaced leather washer, light pitting to the blade and some pitting to the scabbard.

A late Victorian artillery officer's sword, with wirework shagreen grip, pierced knuckle guard and engraved blade in metal scabbard, length of blade 83.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some pitting to the metalwork, light pitting to the blade but never issued. PItting and small dents to the scabbard.

A WWI period sabre, with foliate embossed brass handle, curved blade and leather and brass scabbard, length of blade 73cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Light pitting to the blade which has not been issued, general surface wear, some cracking to the leather scabbard and some areas where the leather has perished.

A George V rifle corps light infantry sword, with wirework shagreen grip, pierced knuckle guard and engraved blade inscribed 'Hawkes & Co, 1, Saville Row, London, W', with metal scabbard, the back blade stamped 'No.7717', length of blade 82.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Tarnishing to the pommel, hilt and guard, also tarnishing and pitting to the blade and scabbard.

A William IV light cavalry sabre, with wirework shagreen grip, pierced knuckle guard and engraved blade inscribed 'Prosser Maker to the King & Royal Family, London', with metal scabbard, length of blade 90cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. The edges of the shagreen is worn in parts, tarnishing and wear to the metal mounts as you would expect, light pitting to the blade but the engraving is good and fresh, a few little nicks to the blade, light pitting to the scabbard.

An Edward VII infantry sword, with wirework shagreen grip, pierced knuckle guard and tapering blade stamped '35W' beneath a crown and with metal scabbard stamped '1.12, 5.S.L.5', length of blade 82cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Minor surface wear to the metal and allover a greasy finish which would presumably clean up well. Shagreen intact. Some light pitting to the blade, pitting and small dents to the scabbard.

An 18th century hussar's sabre, with wirework and leather grip, plain guard and curved blade in metal scabbard, length of blade 82cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Heavy pitting to the metalwork, surface losses to the leather and wear throughout, some light pitting to the blade. The scabbard has surface pitting throughout.

A late 19th century bandsman's sword, with shaped brass grip and crossguard and slightly tapering blade, in leather brass mounted scabbard, length of blade 66cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Minor pitting to the blade, more severe towards the end, general surface wear. The back stitched section of the leather scabbard is loose but is only slightly split. General wear to the leather throughout.

An early 20th century short sword, with lobed pommel, ring grip and tapering blade, length of blade 41cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Presented with an associated scabbard, very heavy pitting and degradation with the blade. Heavy marks and surface wear to the metalwork, the pommel is a replacement and the screw-end is modern.

A late 19th/early 20th century officer's sword, with wire bound wooden grip, P-shaped knuckle guard and very slightly curved blade with metal scabbard, length of blade 75cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Glue residue where the grip has been re-attached to the pommel and hilt, some chips tot he edges of the wood and it has a lacquer or leather finish. wirework replaced. general surface wear. Light pitting to the blade, further pitting and small dents to the scabbard.

A late 18th century naval officer's short sword with shagreen grip, embossed pommel decorated with a lion standing four square, embossed knuckle guard and shell, the hilt embossed with dogs pulling down a stag, the tapering blade with engraved foliate detail, length of blade 55.5cm, with partial leather scabbard. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. The shagreen grip has a split to the side where is has been applied to the frame, general surface wear as expected. Heavy pitting to the blade obscuring a lot of the detail, with chips to the blade edge. Remnants of leather scabbard.

A percussion cap 3-band rifle, the lock plate engraved '1860, Tower', and bearing crown cipher to the lock, complete with hinged sight, bayonet in scabbard and ramrod, length 140cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Holds on full and half, doesn't fire on half, spring ok, general surface wear to wood, pitting to barrel interior, rifling clear.

A 19th century Scottish basket hilt broad sword, with wirework shagreen grip, pierced guard and engraved blade with double fullers, with metal scabbard, length of blade 83cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some discolouration and wear to the shagreen grip, pitting and tarnishing to the basket, light pitting and tarnishing to the blade being heavier towards the end, scabbard has light pitting but overall ok.

A 19th century British sapper's saw back sword, with moulded brass grip, shaped guard and serrated blade, with leather scabbard, length of blade 56.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Slightly misshaped guard with surface knocks and bruises, pitting to the blade, noticeably towards the lower portion, central fold to the leather scabbard forming cracks, also towards the cap end.

A Victorian infantry officer's sword, with wirework leather grip, pierced knuckle guard and engraved blade with metal scabbard, length of blade 82cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some scuffing to the raised parts of the leather, general surface wear to the metal, light pitting to the blade and a few nicks to the blade edge and heavier pitting with a few small dents to the scabbard.

A George V Royal Artillery officer's dress sword, with wirework shagreen grip, pierced guard and engraved slightly tapering blade with remnants of two section wooden scabbard, the back of blade inscribed 'London Made', length of blade 86cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some discolouration to the raised parts of the shagreen grip. General wear to the metalwork, pitting to the blade as can be seen in the photographs and the scabbard is as found.

A Victorian officer's dress sword, with wirework shagreen grip, pierced knuckle guard and engraved slightly curved blade, stamped 'C Webb, 23 Old Bond St, London', length of blade 89cm, in a leather scabbard. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some areas of the shagreen are missing where it meets the back section of the grip, general pitting and surface wear to the metalwork throughout, pitting to the blade. Surface wear to the leather scabbard and tarnishing to the end cap.

A 19th century dress sword, the ornate brass grip and guard with foliate engraved decoration to a slightly tapering blade stamped 'By Appointment Brown & Son 10 & 11 Princess St Hanover Sq London', the reverse decorated with a stylised horse's head above four interlocking stirrups, and with brass mounted leather scabbard, length of blade 81cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. The brass work has some light surface wear but overall in good condition. Light pitting to the blade with some heavy pitting to the end section. Scabbard shows some signs of wear commensurate with age. Slightly separating from the stitched side.

A George V light infantry officer's dress sword, with wirework shagreen grip, pierced knuckle guard bearing the cipher and with engraved blade 'Hebbert & Co, James. St. Haymarket. London', with metal scabbard, length of blade 82.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Pitting to the knuckle guard and pommel, general wear to the shagreen grip, the blade has some signs of pitting and also bears a sticky surface matter. The scabbard is significantly pitted.

A Victorian officer's dress sword, with wirework shagreen grip, pierced knuckle guard and engraved tapering blade housed in a metal scabbard, the blade set with proof roundel, engraved 'F.J.B.' within a scroll and with various further engraved detail, length of blade 81cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Slightly discoloured shagreen, some surface wear to the knuckle guard and some bruises to the raised points, the blade back is no.31826, pitting to the blade throughout and some pitting to the scabbard.

A Victorian light infantry officer's dress sword, with wirework shagreen grip, pierced knuckle guard and engraved tapering blade inscribed 'Robt Mole & Sons, Makers, Birmingham', with metal scabbard, length of blade 81.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. The last section of shagreen where it meets the pommel has been replaced, some wear throughout the remainder. Tarnishing to the pommel and knuckle guard with some sections of the nickel finish rusting away. The blade has some pitting to it as does the scabbard.

A Victorian 1st Lancaster Rifles Volunteers dress sword, with wirework shagreen grip, pierced knuckle guard and engraved blade, inscribed 'J.B. Russell Esqr, First Rifle Lancaster', and with metal scabbard, length of blade 82cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Tarnishing to the metalware as expected, the leather washer is replaced, some discolouration to the shagreen and rubbing around the edges. The engraved detail is slightly obscured and rubbed but still readable and the scabbard has a painted finish with a few small dents.

A Victorian light infantry officer's dress sword, with wirework shagreen grip, pierced knuckle guard and engraved blade, inscribed 'To The Queen, Hawkes & Co, Piccadilly, London', with metal scabbard, length of blade 81.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. The edge of the shagreen is worn in parts, noticeably where it meets the pommel, tarnishing to the metalwork throughout, pitting to the blade and light pitting to the scabbard.

A George V Royal Artillery officer's dress sword, with wirework shagreen grip, pierced knuckle guard, engraved blade and leather scabbard, length of blade 86cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some minor rubbing and losses to the shagreen at the edges, a rough section to the upper portion of shagreen where it meets the pommel. Some rusting and general surface wear to the metalwork, pitted blade with some rusting throughout. The scabbard has a lacquered or painted finish and has an associated leather belt loop attachment.

A Victorian 4th Volunteer Brigade Liverpool Regiment dress sword, with wirework shagreen grip, pierced knuckle guard and engraved blade, complete with metal scabbard, length of blade 83cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Tarnishing to the metalwork, surface wear throughout. Wirework loose to the shagreen grip and missing in parts. Some wear to the raised parts of the shagreen grip, A couple of small edge dents to the knuckle guard, some light pitting to the blade, slightly obscuring with rust at the lower section. The scabbard is significantly pitted and rusted.

A George V Royal Artillery officer's dress sword, with wirework shagreen grip, pierced knuckle guard and engraved blade, with leather scabbard, length of blade 86cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Heavy wear to the metalwork including some surface pitting and rust. Discolouration to the shagreen noticeably to the raised parts and this is very worn in areas. Heavy pitting noticeably to the side of the blade that is inscribed 'Royal Artillery' obscuring the decoration. Further pitting throughout. An associated frog is present to the scabbard which itself has significant surface wear and the end of the scabbard is a modern home-made repair.

A late 19th century British artillery officer's dress sword, with wirework shagreen grip, pierced knuckle guard and engraved blade, in metal scabbard, length of blade 81cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Pitting to the metal work and some surface knocks, shagreen overall in good order, light pitting to the blade with only a few very small nicks, pitting to the scabbard with a few small dents.

A home-made sword, with lion head pommel, checkered grip, three bar guard, tapering blade and metal scabbard, length of blade 74.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. This is a home-made piece using various component parts and also with parts made by the enthusiastic amateur themselves.

A 1908 pattern military issued cavalry sword, with checkered leather grip with recessed thumb mould, bowl guard and tapering blade, stamped with military broad swords and 'FED', also '75' beneath a crown and stamped 'P08' to the blade back, and with metal scabbard, length of blade 88cm. CONDITION REPORT: Patina but no pitting, replacement washer, no movement, crack at base of hand guard, scabbard quite bent, blade reasonably straight. PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service.

A late 19th century dress sword, with scrolling pommel, wirework grip and slightly tapering blade housed in an ornate embossed and leather scabbard, unnamed, length of blade 72cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. General pitting to the blade commensurate with age, some tarnishing to the metalwork, the scabbard has come loose at some stage and been reglued, it feels very dry and shows signs of heavy use. Areas of tarnish to the mounts.

A late 18th/early 19th century dress sword, with all brass grip and guard and engraved steel tapering blade with partial leather brass mounted scabbard, length of blade 77cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some tarnishing to the brass work commensurate with age, the guard is slightly misshaped. General pitting to the blade with slight traces of original blueing and gilt. The scabbard is missing the end section and is in poor condition.

A 19th century naval sidearm, with wirework shagreen grip, simple D-guard, tapering blade and metal scabbard, length of blade 43cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some pitting and surface wear to the guard. One side of the shagreen is badly rubbed leaving small sections missing to the raised parts and slightly misshaping to the wirework, pitting to the blade, heavy pitting to the scabbard.

A Victorian British naval cutlass, with deep checkered grip, figure of eight guard and slightly tapering blade, stamped 'V.R. Mole', with associated leather scabbard, length of blade 74cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Light surface ware and pitting to the grip and guard, light pitting to the blade which has not been sharpened, the scabbard is a replacement.

An early 20th century clip point cutlass, with walnut grip, pierced guard and curved blade, stamped 'Hembrug', with leather scabbard, the guard bearing plaque stamped 'P.A.O.754', length of blade 61cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Heavy tarnishing and discolouration to the crude guard, general surface scratches to the wooden grip. Some pitting to the blade and the tip of the blade is very slightly misshapen. Leather scabbard intact with frog, although the end section where it meets the guard is replaced, quote heavy wear to the leather throughout.

A late 19th/early 20th century naval sabre, with wirework shagreen grip, lion head pommel and hinged side guard with slightly curved blade, in leather scabbard, length of blade 74cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Shagreen is in good condition. Minor surface wear to the brass and some surface pitting. Some pitting to the blade. The leather work on the scabbard has been crudely stitched and could probably be modern but with the original mounts. Scabbard is inscribed 'Salter, Sword Cutler to H.R.H. The Duke of Sussex, London'.