There are 89547 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribeA 1860 model cavalry sabre dating: third quarter of the 19th Century provenance: Italy Slightly curved, single -and false-edged blade with wide, central fuller, tang with two stamps; iron hilt, guard with drop-shaped slot, smooth cap; wooden grip with leather covering, brass wire binding. Iron scabbard with two suspension rings. dimensions: length 107 cm.
A Bersaglieri officer's sabre dating: third quarter of the 19th Century provenance: Piedmont Curved, single -and false-edged blade with wide fuller (slight pitting) doubling at the tip, the forte engraved with trophies, racemes and crowned, Savoy shields; brass hilt, cap shaped as a lion head, horn grip, checkered and worked into sectors. Iron scabbard with two rings. dimensions: length 95 cm.
A cavalry sabre dating: mid-19th Century provenance: Kingdom of the Two Sicilies Curved, single -and false-edged blade, with fuller and groove, stamped "S" within a shield at the tang, with crowned "R" and date "1841"; brass hilt, guard with two loops, short cap, grip with leather covering and brass wire binding. Without scabbard. dimensions: length 106,5 cm.
A fine navy officer's sabre dating: mid-19th Century provenance: Naples Wide, flat, single -and false-edged blade with areas of rust, the forte engraved with trophies, anchor and floral motifs; gilt brass hilt with crowned anchor, pommel shaped as a lion head, folding rear valve; grip with fish skin covering, metallic wire binding. Leather scabbard with brass mounts. To be cleaned. dimensions: length 87 cm.
A Yakoma knife dating: circa 1900 provenance: Central Africa Ribbed, double-edged, iron blade, wide triangular tip with four holes, strengthened tang with open-work and engravings, wooden grip covered with iron and copper thread. Wooden scabbard covered with fur and red fabric, decorated with Red Sea shells. Scarce. dimensions: length 35.5 cm.
A pioneer sabre dating: mid-19th Century provenance: Germany Almost straight, single-edged blade with saw-back, provided with long tang at the base; brass hilt, quillon engraved and shaped as a fish, grooved grip and beak-shaped pommel. Black, leather scabbard with brass mounts, cap with hook. dimensions: length 78 cm.
A rare officer's sabre dating: second quarter of the 20th Century provenance: Germany Slightly curved, single -and false-edged blade with central fuller; gilt aluminum hilt, decorated with bas-relieved oak leaves, langets, the front one with eagle. Black grip with metallic wire binding. Complete with sword knot and black lacquered scabbard, one suspension ring. In original case. dimensions: length 96.3 cm.
A 1934 model cavalry sabre dating: second quarter of the 19th Century provenance: Poland Wide, curved, single -tip and false-edged blade, with a wide fuller at the centre and another fuller near the back, marked "H. LUDWIKOW / KIELCE" on a side, at the base, and "S. wz 34" on the other side, at the back the stamp "K2" within a oval, serial number "C5041"; brass hilt with angled guard and parry quillon with ring, smooth and short cap; grip with grooved, wooden grip scales. Iron scabbard (pitting) with one ring, with thin, square drag. dimensions: length 95,8 cm.
An officer's sabre dating: first quarter of the 20th Century provenance: Romania Straight, single -tip and false-edged blade, featuring the crowned monogram "FF" (Ferdinand I of Romania), engraved with racemes at the forte and marked "Toledo"; white metallic hilt with langets featuring the monogram "FF" and heraldic emblem of Romania; black, hard rubber grip, cap shaped as a eagle head with glass paste eyes. Iron scabbard with two rings. dimensions: length 88,5 cm.
A rare bravery shasqua dating: 19th Century provenance: Russia Curved, single -and short false-edged blade, at the tang stamps and sate "18?5" (third character slightly legible); brass hilt, grip with leather covering and brass wire binding; wooden scabbard with leather covering, brass mounts, the cap featuring the enamelled emblem of the Order of St. Anna and inscriptions in Cyrillic "For bravery". Blade featuring areas of rust; the leather of the scabbard with stains. dimensions: length 100.4 cm.
A very rare kilic of the Cossacks Leib-Garde Rgt. 1907-1917 dating: first quarter of the 20th Century provenance: Russia Curved, single -and false-edged, damask blade, with wide fuller and triple rear groove, at the tang the mark and the name of the manufacturer in Cyrillic, areas of rust; silver hilt with cross-quillon featuring bas-relieved floral decorations, angled, turn-off pommel with monogram of Tsar Nicholas II, a band of foliage. Wooden scabbard with red leather covering, steel mounts decorated with open-works and circles, two rings. dimensions: length 97 cm.
A police short sword dating: 19th Century provenance: United Kingdom Curved, single -tip and false-edged blade (some small teeth), with fuller; one-quillon brass hilt, brass ring-nut and cap, grip with fish skin covering. Leather scabbard with brass mounts, cap with small button. dimensions: length 71 cm.
A National's Guard short sword dating: 19th Century provenance: Piedmont Straight, double-edged blade, with central fuller; solid brass hilt, quillon with cross. Leather scabbard with brass mounts, cap with button with Savoy shield; white leather pocket (defects). dimensions: length 65,5 cm.
A 1810 model Faschinenmesser saw-back short sword dating: first quarter of the 19th Century provenance: Prussia Wide, strong, straight, single-edged blade with saw-back; solid brass hilt and grip in one piece, quillon with counter-curved arms rounded at the ends, marked "A.B.g.20." and "20" on a side. Leather scabbard with brass cap, provided with hook (restored) and mark "20", brass and iron chape. dimensions: length 65,3 cm.
A Faschinenmesser saw-back short sword dating: mid-19th Century provenance: Prussia Straight, single-edged blade with short tip, hollow at the back, with saw-back, at the forte the motto "Fur Gott und das Vatterland" on one side, and the crowned monogram "FWR" (for Friedrich Wilhelm IV, king of Prussia) on the other, remains of marks on the tang; solid brass hilt with short quillon, grip with pommel shaped as a lion head. Leather scabbard with brass chape and cap, the last one provided with a small hook. dimensions: length 63 cm.
A 1856 model saw-back Pioneer's short sword dating: mid-19th Century provenance: England Straight, single -tip and false-edged blade, ribbed at the foible, with saw-back, featuring British stamps and marks at the base of both faces, marked "ROB MOLE & SONS / MAKERS / Birmingham"; one-quillon hilt and grip, both made of iron. Leather scabbard with brass chape and cap. dimensions: length 70,5 cm.
A rare 1847 model Pioneer's short sword dating: mid-19th Century provenance: Turkey Straight, single -tip and false-edged blade, with saw-back; brass hilt with short, lobed arms featuring marks in Arabic characters; grip with horn grip scales held by three nails with brass head. Leather scabbard with outlined mounts, cap provided with button. dimensions: length 66,2 cm.
A lot of two navy sabre briquet dating: 19th Century provenance: France A Mod. An. XIII sabre with blade featuring Klingenthal mark, year "1822" and three stamps: "M" between leaves and surmounted by star, "B" in a frame, and "L"; brass one-quillon hilt, stamped; complete with scabbard. A briquet based on 1767 grenadier's model with curved, single -and false-edged blade and solid brass hilt. dimensions: length 74 - 77 cm.
A Cent Guard 1854 model lance-bayonet Treuille de Beaulieu dating: second quarter of the 20th Century provenance: France Straight, widely grooved, single-edged blade, at the back the mark of the imperial Chatellerault manufacture and the date 1814; brass hilt, slightly counter-curved, small, flat quillon with a round hole and two parallel breaks, slightly thickened at the border; cap with clutch and spring button, dark horn grip, the back in iron. Complete with its iron scabbard, two rings. dimensions: length 115.5 cm.
A 1887 model bayonet with saw-back dating: first quarter of the 20th Century provenance: Swiss Straight, single -tip and false-edged blade, with saw-back, with the mark "S.J.G. HEUHAUSEN"; iron cross-quillon with ring; grip with checkered grip scales. Leather scabbard with iron stamped chaped and cap. dimensions: length 60 cm.
A 1871 model bayonet dating: third quarter of the 19th Century provenance: Germany Straight, single -and false-edged blade, with fuller, featuring remains of the manufacturer's mark at the base and stamps at the back; iron cross-quillon stamped and marked "33.R.R.130."; brass grip with button and iron spring. Leather scabbard with brass chape and cap, marked "35.R.2.124". dimensions: length 59,5 cm.
A 1870/87 model bayonet dating: last quarter of the 19th Century provenance: Kingdom of Italy Straight, single -and false-edged blade, a fuller on two-thirds on the length, marked "TORINO" at the tang, with the crowned stamp "FT", and "BC"; iron cross-quillon; grip with bakelite grip scales and long spring. Leather scabbard marked "TORRE ANNUNZIATA..." with brass mounts, cap stamped "DA". dimensions: length 64,5 cm.
An artillery kindjal dating: circa 1900 provenance: Russia Curved, single -and false-edged blade, with double fuller, ribbed at the centre of base and tip, featuring marks in Cyrillic and a stamp depicting arrow and bow; brass ring-nuts with stamp and mark en suite; grip with wooden grip scales. Scabbard with leather covering, brass mounts, the cap provided with a loop numbered "139" and a stamp in Cyrillic. dimensions: length 59 cm.
An extremely rare knife for chasseur 1835 dating: second quarter of the 19th Century provenance: Sardinian Kingdom Strong, curved, single-edged blade, with hollow tip at the back; brass hilt with slightly counter-curved quillon, provided with langet on one side only; grip with brass band and wooden grip scales held by three iron bars fixed with brass lozenges. Iron scabbard with small knuckle-guard, provided with a small band with single ring. Created in a few dozens of pieces and never been used, for chasseur units, around 1835. See "Armi Bianche Militari Italiane 1814-1950" by Cesare Calamandrei, Ed. Olimpia 1987, page 43 with illustration. dimensions: length 44,5 cm.
A pioneer's knife dating: first quarter of the 19th Century provenance: Austria Straight, single-edged blade with tip, saw-back, at the base the mark "MITTER STEYR"; iron hilt, counter-curved quillons, grip with brown horn grip scales. Leather scabbard with iron chape and cap, with button. dimensions: length 48 cm.
An artillery knife dating: last quarter of the 19th Century provenance: Spain Straight blade with counter-curved edge and tip, fuller, marked "ARTILLERIA F.ca NATIONAL TOLEDO" , with serial numbers; iron quillon, checkered wooden grip scales, beak-shaped pommel. Leather scabbard with iron mounts. dimensions: length 43,5 cm.
A 1898 model artillery machete dating: early 20th Century provenance: Argentina Straight blade with slightly counter-curved, single edge, with fuller, marked "MACHETE DE ART. M.lo ARG. 1898" at the base, serial numbers on one side, the mark "WEYERSBERG KIRSCHBAUM & Co. SOLINGEN" on the other; counter-curved iron quillon; grooved, metallic grip. Scabbard with serial numbers coeval with the knife, complete with leather pocket. dimensions: length 50,5 cm.
An Engineer's Collins 1005 machete dating: first quarter of the 20th Century provenance: USA Strong, curved, single-edged blade, featuring remains of the mark "COLLINS & Co. HARTFO..." "No 1005"; grip with coconut wooden grip scales. Complete with leather scabbard decorated with imprinted frames, the mark "COLLINS & Co. / LEGITIMUS" and emblem; brass chape and cap featuring remains of gilding, loop decorated en suite. dimensions: length 50,5 cm.
A fine kukri dating: first quarter of the 20th Century provenance: India Typical, curved, single-edged blade with double rear groove; brown horn grip; wooden scabbard with leather covering, beautiful smooth silver mounts, engraved pierced and partly gilt, under the cap a small, red stone. Complete with small knives. dimensions: length 37 cm.
A guradè dating: second quarter of the 20th Century provenance: Abissinia Interesting, curved, single -edged blade (probably more antique), with fuller, engraved on both faces with a long decoration depicting grotesque masks and racemes, on one face the lion of Judah, on the other the signature "S. TERZIAN"; horn grip with double "T"; the cap consisting in an Italian coin of Victor Emmanuel III. Wooden scabbard with leather covering, featuring remains of straps. dimensions: length 85,7 cm.
A mandau dating: late 19th Century provenance: Borneo Curved, single-edged blade tapering toward the base; bone grip partially bound with iron wire, provided with a large, chiselled pommel featuring remains of dyed fur. Wooden scabbard with rattan fiber binding and a suspension string. dimensions: length 54 cm.
A fine dha dating: late 19th Century provenance: Burma Single-edged iron blade; long, wooden grip entirely covered with embossed and engraved silver decorated with copper bands; wooden scabbard with silver plating decorated en suite, at the base a large, pierced rosette. dimensions: length 80.5 cm.
A silver mounted dagger dating: 19th Century provenance: Indonesia Simple, straight, single-edged blade; silver-plated hilt engraved with floral motifs, grip scales of dark stone chiselled with yatagan-like ears; wooden scabbard similar to a kris one, entirely silver plated and decorated with embossed floral motifs. dimensions: length 34 cm.
A knife dating: 19th Century provenance: Indonesia Straight, single-edged, pamor blade; black wooden grip sculpted with two figures: a female one seated on a man's shoulders; silver ring-nut. Wooden scabbard with silver covering, richly engraved with floral motifs. dimensions: length 40.5 cm.
A beautiful piha kaetta dating: 19th Century provenance: Ceylon Typical, single-edged blade richly decorated with silver, partially gilt and engraved, at the base a silver mount finely engraved with dragon head and floral decorations featuring gold inlays; sculpted, horn grip with silver mounts. Sculpted, wooden scabbard with mounts of silver sheet featuring filigree decorations (damages and small parts missing). dimensions: length 30 cm.
A fine kukri dating: circa 1900 provenance: India Typical, curved, single-edged blade engraved near the back; wooden grip with engraved, iron ring-nut. Fine, wooden scabbard with brown fabric covering; richly embossed, engraved and pieced, silver mounts, partially gilt. One of the two knives is missing. dimensions: length 37.5 cm.
A gold mounted kukri dating: late 19th Century provenance: Nepal Strong, curved, single-edged blade, wider at the tip, with a slight fuller, ribbed at the back, engraved at the forte with a band of floral motifs on checkered ground, edged by a recessed and gold-inlaid frame ending in the shape of a bird head; at the base of the blade, on a side is the effigy of a Hindu deity and a man standing, on the other a lion; gold ring-nut; ebony grip chiselled and pierced as a monster head. Wooden scabbard with stitched, leather covering (small defects and restoration at the back); gold-plated chape decorated with bas-relieved floral motifs, the cap gold-plated at the front, and decorated with a dragon (with remains of a mark), and silver-plated at the back. dimensions: length 42,5 cm.
A trousse with a piha kaetta dating: 19th Century provenance: Ceylon Straight, single-edged blade with rear groove, featuring a silver decoration at the base; sculpted, horn grip with long ring-nut of engraved and gilt silver; together with a brass pin featuring remains of silver plating and iron tip; together in one wooden scabbard with long silver cap and copper chape. dimensions: length 23.5 cm.
A jian (sword) dating: 19th Century provenance: China Straight, double-edged blade of lozenge section, decorated with brass dots; engraved, brass hilt; grip covered with fabric straps. Wooden scabbard with fish skin covering; brass mounts, engraved and pierced. Small defects and parts missing. dimensions: length 63.5 cm.
A 19th century Portuguese Marmaluke sword, ivory grip, cross piece depicting sword and cannon, engraved 80cm blade inscribed Portugal, metal scabbard with two rings - overall length 96cm CONDITION REPORT: Shrinkage crack to ivory, slight pitting to blade, discolouration to scabbard. 82cm scabbard is not dented or bent. Blade is straight.
A late 19th Century dress Dirk dagger, the blade having a thistle and foliage design to both sides of the blade with the blade also marked, Robt Mole & Sons, Makers Birmingham, together with other makers stamps to the blade, the carved bog oak handle having inset spaced cabochon with handle terminal having toned metal end with relief cast Queens crown to the centre, the wooden constructed scabbard having three metal bands and metal tip each decorated with a thistle design, blade length 30cm.
An antique Japanese Katana (long sword) the iron tsuba decorated with a Samurai gazing from a window under a prunus tree, the hilt with one menuki of a tachi and kabuto helmet and one of prunus blossom, both in gold and copper bronze. The polished blade (71.5cm long) with signed Tang in lacquered scabbard 1.02m long overall
Loading...
