We found 98577 price guide item(s) matching your search
There are 98577 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
98577 item(s)/page
Lot 1
4 bayonets: Swedish M1896 all steel, chequered hollow grip, in its steel scabbard (blade retains most original finish); Japanese Arisaka, wooden grips in its steel scabbard with frog (most original blade finish); No 4 Mk II spike in scabbard; continental socket (AF); a military issue panga, in leather sheath d. 1941 with broad arrow; a kaskara with plain leathr grip. Average GC. (6)
Lot 1
An interesting P1879 saw backed bayonet, blade 25?" with ordnance stamps, in its brass mounted brown leather scabbard, stamped 1917, the pommel and top of locket marked en suite P.3.S.M 80; the late date and style of scabbard indicate use by Sappers and Miners in India. GC (some surface rust marking) Plate 11
Lot 1
A P55 Lancaster sword bayonet, pipe back blade with stamps at forte, brass crossguard and pommel stamped 10.99 R.A.M.C 6084, diced leather grips (some wear and light pitting, brass abraded) and another, stamped V. MSC 111, in its brass mounted leather scabbard (grips AF, plated overall, scabbard leather worn). (2)
Lot 1
3 officers' sword scabbards: leather FS with frog for 1897 patt infantry, gilt mounted leather for 1845 patt infantry (leather cracked, repair above chape), and gilt mounted leather for Highland broadsword, engraved "Hunter, South Bridge, Edinburgh" on the locket (leather worn, chape missing); a steel hilted tulwar (rusted overall, edge nicked) and a near relic society sword seized in scabbard. QGC to GC
Lot 1
A USA Society sword, DE plated blade 27?", etched with knight, trophy mounted figures and castle within gilt washed scrolled panels, ornamental enamelled silver plated crossguard with motto and knight's head pommel, chain knucklebow, stained blue grip with cross and initials MC, in its plated scabbard with ornamental mounts en suite with hilt. GC (maker's and owner's names ground from blade).
Lot 1
A USA Society sword, DE blade 26", by The MC Lilley & Co, Columbus, Ohio, etched with knights, mounted figures, trophies and owner's name George Robbins Mount in gilt washed panels, ornamental enamelled silver plated crossguard and knight's head pommel, black grip with cross, in its silver plated scabbard with ornamental mounts ensuite with hilt. GC (some plating wear)
Lot 1
A cut steel hilted courtsword, slim, tapering triangular blade 31" by Goodall & Graham, 7 Conduit St, etched with foliage, shell guard with vertical flutes and facetted studded decoration, incised edge, the grip knucklebow and urn pommel similarly decorated with facetted studs and flutes, in its PL scabbard with cut steel chape and locket. VGC blade retains all original polish, (scabbard kinked and small hole repaired at tip) Plate 11
Lot 1
A cut steel hilted smallsword, hollow triangular section blade 31", etched with trophy and wreath within scrolled panels, hilt with turn down pierced shellguard, pas d'ane rings, knucklebow, urn shaped pommel and ovoid grip with fine cut and pierced studding overall, in its mounted black leather scabbard. GC (frog stud missing). Plate 11
Lot 1
A good courtsword, hollow triangular section blade 32", lightly etched with foliate panels at forte, nicely chiselled copper gilt hilt with turn down crossguard and concave shellguard, bearing Roman goddess with fasces seated amid a trophy of arms, ornamental knucklebow with warrior's head insert, forward facing pommel with lion's head cap, MOP grips, in its brass mounted buckram scabbard. Near VGC Plate 11
Lot 1
A Third Reich army officer's sword, plated curved blade 29" by WKC, gilt hilt with stirrup knucklebow decorated with oak leaves, Third Reich eagle on langet, mounts decorated with laurel and oak leaf sprays, wirebound black ribbed grip, in its black painted steel scabbard, GC (blade mint, hilt retains most original gilding, minor wear to scabbard paint, a few strands of grip wire loose). Plate 2
Lot 1
The following 17 lots comprise Part 3 of the John Morgan Collection of British Cavalry Swords. A 1796 pattern light cavalry trooper's sword, curved, shallow fullered blade, 33", with inspector's stamp at forte, regulation stirrup hilt with langets, eared backstrap and pommel, ribbed leather grip, in its steel scabbard. Basically GC (grip leather replaced, blade not fully seated, some wear and pitting)
Lot 1
A 1796 pattern light cavalry trooper's sword, broad, curved shallow fullered blade 33", marked B on backstrap, inspector's stamp at forte, regulation steel stirrup hilt with langets, plain backstrap, without ears, and pommel, in its steel scabbard. Basically GC (grip covering missing, cleaned over light pitting, edge lightly nicked)
Lot 1
An 1882 pattern (long) cavalry trooper's sword, slightly curved blade 34", the fuller ending 9?" from tip, with inspector's stamps and date 6/84 at forte, regulation sheet steel guard with reinforced edges, pierced Maltese Cross, stamped 5DG, diced leather grips (worn), in its converted P64 scabbard. GC (scabbard AF)
Lot 1
An 1821 pattern light cavalry trooper's sword, slightly curved, fullered blade 35?", marked Enfield 1840 with crown/VR on backstrap, regulation triple bar steel hilt with straight quillon, eared backstrap and pommel, ribbed leather grip, in its steel scabbard. QGC, the blade sound (dark medium to heavy pitting to hilt and scabbard, grip wormed)
Lot 1
An 1821 pattern light cavalry trooper's sword, slightly curved, fullered blade 35", marked FS Deakin Cast Steel on backstrap, regulation 3 bar steel hilt, eared backstrap and pommel, ribbed wooden grip, in its steel scabbard. QGC (blade cleaned over heavy pitting and distressing, grip leather missing, hilt worn, scabbard dented)
Lot 1
A Wm IV 1821 pattern light cavalry officer's sword, slightly curved, pipe back blade 35?", DE at tip, etched "Warranted" and crowned WR IV cypher and wreath within panels, regulation triple bar steel hilt, backstrap and stepped pommel, wirebound fishskin grip, in its steel scabbard. Basically GC (blade a little wear and light pitting patches, hilt and scabard cleaned over pitting, scabbard dented)
Lot 1
An early Vic 1821 pattern light cavalry officer's sword, slightly curved pipe back blade 35?", DE at tip, etched with crowned VR cypher and wreath within frosted panels, regulation triple bar steel hilt, backstrap and stepped pommel, wirebound fishskin grip, in its steel scabbard. GC, the blade retaining a little original polish (hilt and scabbard cleaned over pitting, one or two scabbard dents, fishskin AF) Plate 10
Lot 1
An unusual Wm IV 1821 pattern heavy cavalry officer's sword, slightly curved, slender (1") pipe back blade, 34", by Buckmaster (very faint), DE at tip, etched for its entire length with scrolling foliage, trophies and panel with crowned WRIV cypher and wreath, regulation steel honeysuckle guard, backstrap with pronounced stepped pommel, wirebound fishskin grip, in its steel scabbard. GC (blade some wear, hilt and scabbard cleaned over light pitting) Plate 10
Lot 1
An 1882 pattern (short) cavalry trooper's sword, slightly curved, fullered converted P64 blade with inspector's stamps and date 2/84 at forte, regulation sheet steel guard with reinforced edges, pierced Maltese Cross, stamped Y/SN (South Notts Yeo), diced leather grip, in its khaki painted steel scabbard. GC (a little wear and light pitting, scabbard some dents and paint wear)
Lot 1
An 1899 pattern cavalry trooper's sword, slightly curved, fullered blade 33", stamped Wilkinson London at forte with inspector's marks and date 8 Ô01, sheet steel bowl guard reinforced at forte and along inner edge, plain wooden grip (replaced), in its steel scabbard with opposing rings, the back of the guard and scabbard stamped 5L 437 (unclear). GC, the blade good, (hilt and scabbard cleaned over pitting, one throat screw missing)
Lot 1
A similar 1899 sword, with date 4.01 at forte, diced leather grips, stamped 10H 298 on back of guard, in an interesting experimental (?) leather covered scabbard with WM locket, and 2 screw bands, one with ring, the other with shallow side loop, painted black. Basically GC (blade kinked towards point, guard dented, scabbard leather scuffed)
Lot 1
A Geo V 1912 pattern cavalry officer sword, straight fullered blade 35", by Wilkinson, No 53639 (1916), etched with crowned R Arms, crowned GVR cypher within foliate panels, regulation nickel plated, solid, scrolled pattern bowl guard, ornamental stepped pommel, wirebound fishskin pistol grip, in its leather FS scabbard with leather knot. GC the hilt generally good. (blade reseated and worn, much of the etching faint)
Lot 1
A Geo naval officer's dirk, shallow diamond section blade 6", etched overall with scrolls and foliage, stepped gilt crosspiece engraved with leaves along the top, turned ivory grips, in its gilt scabbard engraved "Read Portsmouth" with lion's head, and 3 flower, vignettes within scrolled and chevron panels, with 2 hanging rings. Basically GC (blade some wear, grip cracked and top of pommel missing, tip of scabbard replaced)
Lot 1
A 1796 cavalry trooper's sword, broad curved fullered blade 32", with Inspector's stamps at forte, regulation stirrup hilt with langets, eared backstrap and pommel, leather grip (AF), in its steel scabbard engraved en suite with hilt "4/H/48" and bearing a WM oval plate engraved "Balaclava/25th Oct 1854/charge"; evidently intended to commemorate the services of The 4th (Q Own) Light Dragoons (they became Hussars in 1861) in the famous Charge of the Light Brigade. GC (blade heavily cleaned)
Lot 1
A Vic 1827 rifle officer's type sword of the Bengal Police, almost straight, fullered blade by Harman & Co Calcutta (very faint), etched with crowned VRI cypher and crowned BP within scrolled panels, regulation steel hilt incorporating crowned BP, wirebound fishskin grip, in its steel scabbard. QGC (blade worn, etching faint, grip AF, hilt and scabbard lightly pitted, throat missing)
Lot 1
A Prussian cavalry officer's sword, curved fullered blade 33", etched with crowned eagle and trophies with scrolled panels, pronounced steel stirrup hilt with langets, plain eared backstrap and pommel, ribbed fishskin grip, in its steel scabbard with single hanging ring. Basically GC (blade some wear, grip wire missing, dark rust to hilt and scabbard)
Lot 1
A Geo V 1821 pattern officer's sword of The Royal Artillery, very slightly curved blade 35", by Wilkinson, no 50438 (1916) etched with crowned R Arms, GVR cypher in Union spray with "Ubique", cannon, winged lightning and "Royal Artillery", in scrolled union spray panels, regulation plated hilt, wirebound fishskin grip, in its steel scabbard. GC, the blade retaining some original polish (hilt plating some wear, scabbard some wear and dents, one throat screw missing)
Lot 1
A French made 19th century Chilean cavalry trooper's sword, slightly curved, deeply fullered blade 33", with fuller along the back edge at tip, marked "Manufacture d'armes de Chatellerault JH" on backstrap, steel bowl guard pierced with 7 bars, and openings along the back edge, cap pommel, ribbed wooden pistol grip, various nos stamped on hilt, in its steel scabbard, with single hanging ring. GC (a little light pitting overall) Plate 9
Lot 1
A Vic officer's 1821 pattern sword of The Royal Artillery, very slightly curved blade 34?", by Wilkinson, no 25588 (1883), etched with crowned R Arms, VR cypher within Union spray and "Ubique", winged lightning, "Royal Artillery" and owner's crest, regulation steel hilt, wirebound fishskin grip, in its steel scabbard, with knot. GC (blade sharpened for service, dark rust patina to hilt and scabbard)
Lot 1
A good infantry officer's 1897 pattern sword, c 1910, straight fullered blade 32?", by Samuel Moses & Sons Ltd, Mansell St, EC, etched with crowned R Arms, crowned GVR cypher and wreath within scrolled, floral panels, regulation plated hilt incorporating crowned Ed VII cypher, wirebound fishskin grip, in its leather FS scabbard with frog and leather knot. Near VGC retaining most original blade finish and hilt plating, (a few minor pitting spots) Plate 8
Lot 1
An 1821 pattern light cavalry officer's service sword, plain slightly curved pipe back blade 34?", DE at tip, regulation steel hilt, wirebound fishskin grip, in its steel scabbard. Basically GC (blade slightly shortened, dark pitting patina overall, small portion of fishskin missing at top of grip, old black paint to scabbard and hanging rings missing)
Lot 1
An 1845 pattern infantry officer's sword, very slightly curved blade 32?", by Wilkinson, no 25218 (1882), etched with crowned VR cypher within scrolled panels and owners initials "HEW" in script, regulation copper hilt incorporating crowned VR cypher, wirebound fishskin grip, in its steel scabbard partly covered in leather with leather frog, buff leather knot (AF). GC (some wear, blade polished bright)
Lot 1
An 1899 pattern cavalry trooper's sword, slightly curved, fullered blade 33?", with various Enfield stamps at forte, steel bowl guard reinforced at forte and inner edge, with Enfield stamps, diced leather grips secured by 3 studs, in its steel scabbard with opposing hanging rings and additional ring welded to back edge at tip. GC Plate 9
Lot 1
An Ed VII Indian army 1827 pattern rifle officer's sword, straight blade 32?", faintly etched with crowned ERI cypher within scrolled panels, regulation silver plated copper hilt incorporating crowned strung bugle, wirebound fishskin grip, in its black leather FS scabbard with plated chape and locket. Basically GC (some wear, especially to blade)
Lot 1
A scarce 1861 pattern Army Hospital Corps sergeants sword, slightly curved, fullered blade 29", DE at tip, marked Mole on backstrap, with Enfield inspector's stamp at forte, pattern 1845 infantry officer's brass hilt incorporating crowned VR cypher, fishskin grip, marked behind the quillon "4 1878/AHC/1724" in brass mounted black leather scabbard, the locket with frog stud and marked on the back "NTM2A", with a leather knot. GC (grip wire missing, sword does not fully enter scabbard, blade some wear and light pitting).
Lot 1
An 1821 pattern heavy cavalry officer's service sword, plain, very slightly curved blade 35", scratch engraved along the edge at forte "G R Pryse, Welsh Horse" (Lieut 30th Aug 1914), regulation plated scroll pattern bowl guard, wirebound fishskin grip, in its leather FS scabbard. GC (blade some wear and pitting, rust patches to guard, mostly inside). Plate 9
Lot 1
A 1908 pattern cavalry trooper's sword, straight fullered blade 35", with P'08 on backstrap at various stamps at forte, regulation steel bowl guard, diced composition grip, in its steel scabbard, the scabbard and guard marked en suite "4/DG/403". GC, (scabbard slightly dented at tip, one throat screw missing) Plate 9
Lot 1
A Geo V 1897 pattern infantry officer's sword, straight fullered plated blade 32?", by Wilkinson, No 61383 (1928), etched with crowned R Arms, GVR cypher and wreath within scrolled panels, regulation plated hilt incorporating crowned GVR cypher, wirebound fishskin grip, in its plated scabbard. GC (hilt and scabbard plating rusted)
Lot 1
A Vic 1821 pattern light cavalry officer's sword, almost straight fullered blade 35", by Hawkes & Co, London, Manufacturer to the Queen, nicely etched with crowned interlaced VR cypher within scrolled and frosted panels, regulation steel hilt with traces of plating, wirebound fishskin grip, in its plated scabbard. GC, the blade retaining some original polish (grip wire AF, scabbard plating worn) Plate 10
Lot 1
A French M AN XI light cavalry trooper's sword, curved fullered blade 34?", regulation brass hilt with knucklebow and long langets, 2 sidebars, plain backstrap, ribbed leather grip with oval brass stud, in its steel scabbard; the markings have been removed from the backstrap and only faint traces remain to hilt apart from no "45", suggesting that it was sold abroad. GC Plate 9
Lot 1
A Continental officer's sword, slightly curved, fullered, plated blade 32" with narrow back fuller to centre section, by F W Holler, Solingen, brass French officer's style hilt, knucklebow with 3 sidebars and cap pommel, panels of leaf decoration, wirebound composition grip, in its plated scabbard. Near VGC (a little light bubbling to scabbard plating)
Lot 1
A Vic 1827 pattern officer's sword of the 7th Surrey Rifles (Southwark), slightly curved blade 32" by Smith Leicester Place (? unclear) London, etched with crowned VR cypher, 7th Surrey Rifles and strung bugle, regulation steel guard incorporating crowned strung bugle, wirebound fishskin grip, in its steel scabbard. QGC (blade some wear and dark stains, fishskin worn, dark medium pitting to hilt and scabbard)
Lot 1
A scarce Vic 1827 pattern officer's sword of the Brecon Rifles, slightly curved fullered blade 32?", by Maxsted & Son, London, nicely etched with crowned VR cypher strung bugle and scrolls "Brecon" and "Rifles" within scrolled, frosted panels, regulation steel hilt incorporating crowned strung bugle, wirebound fishskin grip, in its steel scabbard. GC the blade retaining much original polish (dark pitting patina to hilt and scabbard). Plate 8
Lot 1
A Geo V 1895 pattern sword of The R Engineers, straight, fullered blade etched with crowned R Arms, RE and motto scrolls above and below, GVR cypher, winged lightning and Royal Engineers, regulation plated hilt, without turned up inner edge, incorporating crowned GVR cypher, wirebound fishskin grip, in its leather FS scabbard. QGC (lower part of blade and hilt rusted overall)
Lot 1
A good Vic 1822 pattern infantry officer's Field officer's sword, slightly curved, pipe back blade 32", DE at tip, by "Prosser to the Royal Family (sic) London" on one side and similar "Charing Cross" on the other, etched with crowned VR cypher and wreath in frosted panel, regulation gilt hilt, with turn down inner portion, incorporating curved VR cypher, ornamental backstrap and stepped pommel, wirebound fishskin grip, in its brass scabbard. GC, the blade retaining much original polish, the hilt approx 40% gilt (old laquer to hilt and scabbard) Plate 8
Loading...-
98577 item(s)/page