There are 89918 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribeSyrian Sword Shamshir, 19th Century, broad curved single edge blade cut with a single broad fuller, iron cross piece, horn grips inlaid with pewter stats and brass pins, silver pommel and grip sides, in its leather covered scabbard with engraved silver top mount and single hanging band (lower band missing). Blade 86cms. Quite good condition, well worn overall.
WW2 German Army Officers Dagger, having orange grip with the pommel having oakleaves relief. Cross guard in the form of a German army eagle. Attached to the grip is an officers bullion dagger knot / portepee. Housed in its polished scabbard with two hanging rings. Plain double edged unmaker marked blade which measures 24 ¾ cms, overall 39 ½ cms. Generally good example.
WW2 British Wilkinson Sword 2nd Pattern Fairbairn Sykes (F.S) Commando Knife, good example of a type with brass knurled grip. Unmarked oval cross guard with blued finish. Housed in its original leather scabbard with blackened brass lower chape. Complete with the leg tabs and belt loop with elasticated strap. Double edged blade etched with Wilkinson Sword London makers mark to one side and the other side etched with ‘THE F-S FIGHTING KNIFE’. Blade tip rounded but otherwise generally good condition. The blade measures 17cms, overall 31 ¾ cms.
WW2 German 2nd Pattern Luftwaffe Officers Dress Dagger with Portepee by Anton Wingen Jr, white celluloid grip with wire binding, pommel with swastika to centre of both sides, cross guard in form of eagle in flight. Attached to the grip is an original officers dress portepee / knot. Housed in its original scabbard with two hanging rings. Double edged blade with makers trade mark to the base. The blade measures 25cms, overall 42 ½ cms. Some staining to the blade and wear to the knot.
Copy of a French Napoleonic Period Imperial Guard Pattern Light Cavalry Troopers Sword, regulation curved single edge blade etched Mfure Nale De Klingenthal Coulaux freres Entreps, regulation brass stirrup hilt, brass wire bound leather covered grip, in its brass scabbard with a pair of open panels filled with black leather (slightly shrunk) , twin iron suspension rings and large iron chape. Blade 85cms. Good condition with age wear overall, some dents and dings to scabbard, a little insignificant active rust to tip of blade. Good quality copy of this early sword
Rare Third Reich Diplomatic Officials Dress Dagger by Alcoso, Solingen, untouched as found example of the rare Diplomatic service dress dagger, designed the same as the government officials dress dagger but the eagles head on the cross guard faces the opposite way to the pommel. Dagger with mother of pearl grips. Plating to the grip and eagle head pommel is worn revealing some of the brass base metal. Cross guard remains in generally good condition. Housed in the original scabbard with two hanging rings, the ring bands of oakleaves relief. Double edged plain blade with makers trademark to the reverse. The blade has some spotting and finger staining. Blade measures 25 ¾ cms, overall 39 ½ cms. The dagger is a good example overall of one of the rarest dress daggers of the Third Reich.
WW2 German K98 Combat Bayonet, with two piece bakelite grips, steel pommel with acceptance stamp to the reverse of the pommel. Housed in its steel scabbard stamped ‘5190’ and with leather bayonet frog attached. Blade with fuller to the back edge, good percentage of the blueing remaining to the blade. The blade is numbered ‘5455’ and reverse ‘41asw’. Blade 25cms, overall 40 ½ cms.
WW2 German Army Officers Dagger by Alcoso Solingen, the dagger is fitted with a black grip which is the type used on the so called 1st model railway dagger, but from our understanding these daggers were only made by Robert Klaas. This dagger is complete with the top pommel, eagle cross guard with pronounced central eagle, housed in its original scabbard with two hanging rings. Original officers dagger portepee / knot attached. Good full length double edged blade with Alcoso, Solingen makers trade mark to the base. Blade measures 25 ½ cms, overall 39 ½ cms.
Imperial German Model 1898 n.a 2nd Pattern Bayonet, having two piece wooden grips and steel pommel with acceptance stamps to the reverse, short pattern steel cross guard. Housed in its original all steel scabbard with bayonet frog stud. Pipe back blade with fuller to the back edge. Makers details for ‘C.SCHILLING SUHL’. Acceptance stamp and crown over ‘W 07’ to the spine of the blade. Generally good condition. The blade measures 52 ¼ cms, overall 68cms.
19th Century Dirk, copper based hilt with painted enamel decoration. Replaced polished top. Housed in gilt metal scabbard having floral decoration and two hanging rings. Reverse engraved ‘FIRMIN & SONS Manufacturers 153 Strand LONDON’. Double edged tapered blade with medial ridge. The blade 25 ¼ cms, overall 38cms. Tarnishing and wear to the exterior.
WW2 German Kriegsmarine Officers Dress Dagger by F W Holler Solingen, generally good example of a naval officers dagger with white celluloid grip having wire binding. Gilt brass eagle pommel top and cross guard with fouled anchor to central cartouche and press button release stud.. Housed in its deluxe hammered pattern scabbard with two hanging rings. Double edged polished blade with sailing ship etching. Makers trade mark to the base of the blade. The blade is in generally good condition with just light surface staining. Blade measures 25cms, overall 42 cms. Small section of the grip missing to the very top just under the pommel.
Third Reich Police Bayonet by Carl Eickhorn Solingen, standard model example with two piece stag horn grips. Eagle head pommel and cross guard with oakleaves relief. No Police emblem to the grip. Housed in the original leather and nickel plated mounted scabbard. The reverse of the cross guard is stamped ‘56’ and the top scabbard mount stamped ‘L.W.56’. Blade with fuller to the back edge. Makers trade mark to the base of the blade. Some wear to the blade and exterior fittings but generally still a good example.
Imperial German Model 1898 Bayonet, good untouched example with two piece wooden grips. Steel pommel and cross guard. Housed in its leather and steel mounted scabbard with leather bayonet frog attached. Pipe back blade with fuller to the back edge. Makers details of C G Haenel, Suhl to the base. Spine of the blade crowned acceptance stamp and date stamp ‘06’. Some wear to blade, scabbard leather dry and small split / hole. Blade 52cms, overall 67cms. Scabbard leather shrunk leaving gap between cross guard and top scabbard mount. Late Gordon Anderson collection
British 1907 Pattern Bayonet by Wilkinson, with two piece wooden grip with securing screws. Steel pommel with oil hole and cross guard with muzzle ring. Olive green paint finish to the metal fittings. Housed in the original leather and steel mounted scabbard with brown leather bayonet frog attached. Blade with fuller to the back edge. Various acceptance stamps and Wilkinson makers mark. Blade 43 ½ cms, overall 58cms.
British 1907 Pattern Bayonet by Sanderson, good example with two piece wooden grips. Steel pommel with oil hole and short cross guard with muzzle ring. Housed in brown leather scabbard with steel mounts. Complete with brown leather bayonet frog. Blade with fuller to the back edge, crowned GR mark and 1907 8 18 with ‘SANDERSON’ maker marked. Blade 43 ½ cms, overall 58cms; British 1907 pattern bayonet with two piece wooden grips, blackened steel pommel, cross guard and housed in its leather and blackened steel mounts. The blade with fuller to the back edge, acceptance stamps and ‘SANDERSON’ makers details. Blade 43cms, overall 57cms; British 1907 bayonet with two piece wooden grips. Housed in its leather and steel mounted scabbard. Blade with fuller to the back edge, worn issue stampings. Blade 43cms, overall 58 ½ cms. (3 items)
1796 Pattern Heavy Cavalry Troopers Sword, regulation blade with spear point stamped Hadley on back edge, crowned inspector’s stamp, regulation pierced iron guard with rear section officially removed, ribbed wooden grip (leather covering removed), in its iron scabbard with twin suspension rings. Blade 87.5cms. Basically good condition, blade edges and edge of guard all refinished, scabbard and hilt moderately rusted overall, acceptable black patina overall.
Third Reich Hitler Youth Transitional Dagger by Carl Eickhorn Solingen, two piece chequered grips with fixed enamel HJ diamond insignia to the centre of the grip. Some plating lifting to the pommel and cross guard. Housed in its original scabbard but the metalwork has been repainted blue grey. Leather belt loop with securing strap. Plain blade with the reverse having Carl Eickhorn makers mark and RZM M7/66 mark. Blade 12 ½ cms, overall 25cms.
Victorian 1845 Pattern Rifle Officers Sword, regulation blade by Mole No. M2473 etched with crowned royal cipher, strung bugle and foliage, regulation plated iron hilt with fixed side guard, wire bound fish skin covered grip, in its plated dress scabbard with two hanging rings. Blade 82cms. Good condition, plating worn overall.
British 3rd Pattern Commando Knife, good example with the one piece ringed grip with a number ‘2’ stamped on the pommel and number ‘4’ with broad arrow on the ferrule. Oval cross guard stamped ‘ENGLAND’. Housed in the original leather scabbard with brass lower chape and leg tabs. Complete with the belt frog which is stamped ‘ENGLAND’, elastic strap present but damaged. Good unmarked double edged blade with medial ridge. The blade measures 17cms, overall 32 ½ cms.
French Gladius Type Sidearm, large one piece ribbed brass hilt and cross guard. Housed in its brass mounted leather scabbard and fixed loop to the top fitting. Swollen double edged blade which measures 49 cms in length. Worn makers stamp to the base of the blade but with date 1832. Some wear but generally good overall condition.
British GVIR Naval Officers Sword, regulation blade by Wilkinson etched with crowned royal cipher and fouled anchor together with bands of fruiting oakleaves, regulation brass hilt with folding side guard, bullion dress knot, wire bound composition grip, in its brass mounted leather scabbard. Blade 79.5cms. Good condition.
20th Century German Divers Knife by Siebe Gorman & Co, good example with turned handle with screw top pommel, brass cross guard. Housed in its weighted brass scabbard with leather belt loop. Double edged blade with medial ridge. Makers details to the blade. Some pitting to the top section of the blade but otherwise a good example.
WW1 German Pioneer Sawback Model 98/05 Mauser Bayonet, good example with two piece wooden grips, steel pommel and cross guard. Housed in its steel scabbard with leather bayonet frog. The reverse of the frog is heavily stamped with regimental and issue stamps. Swollen blade with sawback edge. Blade with maker details for Stahlbume Ferd Schleutermann Remscheid-Hasten. Spine of the blade stamped with crown over W 16 and acceptance stamp. Blade 37cms, overall 52cms.Late Gordon Anderson collection
Imperial German Model 1871 Bayonet, good example with brass grip and steel cross guard with muzzle ring. Reverse of cross guard stamped ‘E.M. 261’. Housed in its brass mounted leather scabbard. The top scabbard mount has regimental stampings including re-issue stamp for ‘E.J. IV.301’. The top mount is missing its throat fitting. Straight blade with fuller to the back edge. Maker details of Alex Coppel, Solingen. The blade measures 47cms, overall 63cms.
Third Reich Sturmabteilung (S.A) Dress Dagger by Malsch & Ambronn Steinbach, example with brown wooden grip having nickel silver eagle inserted and enamel SA device emblem. Polished nickel silver mounts with the lower guard being stamped with district mark ‘Sa’. Housed in its original but later RZM style scabbard. Blade with motto ‘Alles fur Deutschland’ and makers trade mark to the base. The blade has been polished but motto and makers trade mark still present and clear. Blade 21 ½ cms, overall 37 ½ cms.
Third Reich Fire Brigade Parade Bayonet, wit two piece chequered grips, plated pommel and ‘S’ type cross guard. Housed in its original scabbard with black leather bayonet frog attached. Polished plain blade with fuller to the back edge. No maker or distributor details. The blade measures 24 ½ cms, overall 40cms. Some plating lifting to the fittings.
Scottish N.C.O’s Basket Hilt Backsword Post 1912, plain regulation blade cut with a single fuller, etched Fenton Brothers Sheffield, Cutlers Established 1850, Silversmiths to H M Government, and with issue stamps for 1912, 1914 and 1925, regulation type brass basket hilt with wire bound fish skin covered grip, in its leather covered field service scabbard (suspension band missing). Blade 83cms. Good condition.
WW2 British 2nd Pattern ‘B2’ Fairbairn Sykes (F.S) Commando Knife, good example with brass grip, steel cross guard stamped with broad arrow, ‘B2’ and ‘ENGLAND’. Housed in its leather scabbard with brass lower chape. Complete with the leg tabs to the scabbard. Elasticated strap missing from the belt loop. Unmarked double edged blade with medial ridge. The blade measures 17 cms, overall 32 cms.
British GVR Royal Artillery Officers Sword, polished regulation Wilkinson blade (not numbered) etched with crowned royal arms, cipher and regimental title amidst scrolling foliage, reverse with Royal Artillery and thunder flash, regulation plated triple bar guard, wire bound fish skin covered grip, in its leather covered filed service scabbard. Blade 89cms. Good condition, minor wear to plating.
WW2 British Wilkinson Sword 2nd Pattern Fairbairn Sykes (F.S) Commando Knife, good example of a type with brass knurled grip. Unmarked oval cross guard with blued finish. Housed in its original leather scabbard with blackened brass lower chape. Complete with the leg tabs and belt loop with elasticated strap. Double edged blade etched with Wilkinson Sword Co Ltd London makers mark to one side and the other side etched with ‘THE F-S FIGHTING KNIFE’. Blade in good condition. The blade measures 16cms, overall 31 ½ cms. Leather scabbard slightly shrunk.
WW1 German 1916 Ersatz Bayonet, good example of an untouched ersatz all steel bayonet which retains much of its original field grey paint finish. Hilt and cross guard with muzzle ring open at the top. Housed in the steel scabbard with brown leather bayonet frog attached. Blade with fuller to the back edge. Acceptance stamp to the spine. Blade measures 31 ½ cms, overall 45 ½ cms. This pattern of Ersatz bayonet was introduced in 1916.Late Gordon Anderson collection
British 3rd Pattern Fairbairn Sykes (F.S) Commando Knife by William Rodgers, good example with much of the blackened finish remaining to the bronzed ringed grip. Oval cross guard stamped ‘WILLIAM RODGERS SHEFFIELD ENGLAND’. Housed in its leather scabbard with brass lower chape, leather leg tabs and belt loop with elasticated strap. Very good condition double edged blade with medial ridge and much of the original blueing remaining. Blade 17 ½ cms, overall 30 ½ cms.
British Model 1897 Royal Engineers Officers Sword, regulation pattern officers sword with heavily polished / chromed guard with crowned VR cipher. Brown leather knot attached to the guard. Grip with the original wire binding. Housed in its original brown leather field service scabbard. Straight blade has been heavily polished loosing much of the etched decoration. Spine stamped ‘M3408’. Blade 83cms, overall 102cms. Accompanied by the leather field service cover / bag. Late Gordon Anderson collection
British 1845 Pattern Officers Sword of the 20th (Artists) Middlesex Rifle Volunteers, fine regulation pattern officers sword with brass hilt having crowned VR cipher to the central cartouche. Grip with the original wire binding. Housed in its steel scabbard with two hanging rings. Polished blade etched with foliage, ‘MIDDLESEX 20TH ARTISTS’ Mars and Minerva profiles above strung bugle and ‘RIFLE VOLTRS’. Reverse of the blade with crowned cipher and Hobson & Sons retailers details. Some surface staining to the blade and exterior untouched. Blade 83cms, overall 101cms.
Imperial German Model 1888 Infantry Officers Sword, brass guard with Prussian eagle to the centre of the guard. Grip with cipher to the centre and wire binding. Housed in its steel scabbard with single hanging ring and leather sword hanger. Scabbard missing the top throat fitting. Polished straight blade cut with two fullers to the centre. Weyersberg Kirschbaum & Cie (WKC) Solingen makers mark and early trade mark to the other side. Blade 77 ½ cms, overall 95 ½ cms.
WW1 German S84/98 Bayonet with Unusual Leather Frog, standard model bayonet with two piece wooden grips. Steel pommel with acceptance stamp. Housed in its steel scabbard. Attached to the scabbard is a brown leather bayonet frog with and additional leather securing strap attached. Blade with fuller to the back edge. The blade has stamp for ‘BAYARU’ and the other side ‘GOTTLIEB HAMMESFAHR SOLINGEN FOCHE’. Some surface staining to the blade and wear to the exterior fittings. The blade measures 25cms, overall 40 ¾ cms.
British 3rd Pattern Fairbairn Sykes (F.S) Commando Knife, good example of a ribbed one piece grip with much of the original finish. Top nut blackened and stamped with a number ‘2’. Plain unmarked oval cross guard. Housed in its original leather scabbard with brass lower chape, leg tabs and belt loop. Fine blued double edged blade with medial ridge. Blade 17 ¼ cms, overall 31 ½ cms.
Scarce GVR Royal Air Force Officers Sword, blade by Hobson & Sons (London) Ltd, London etched with crowned royal arms, crowned eagle and foliage incorporating 8 vacant banners, regulation brass guard, composition grip with traces of wire binding, in its leather scabbard with regulation brass mounts. Blade 82cms. Good condition, some age wear overall.
British 3rd Pattern Commando Knife, being one piece ringed grip with brass pommel nut. Stamped ‘1’ to pommel. Blackened oval cross guard. Housed in its original leather scabbard with brass bottom chape. The leg tabs have been removed from the scabbard. Complete with the belt loop frog with the elasticated cloth being replaced by a leather strap with brass stud fitting. The name 'M.COLATO' scratched into the belt loop frog. Double edged blade with medial ridge. Some light evidence of sharpening to the edge. Blade 16 ½ cms, overall 32cms.
British 1912 George V Cavalry Sword Middlesex Yeomanry by Wilkinson, numbered 52301, regulation pattern officers sword with large dish guard, stepped pommel and grip retaining the wire binding. Housed in the leather field service scabbard. Regulation pattern blade with Wilkinson makers mark and number to the spine of the blade. Etched foliage and cyphers to the blade. Panel with etched initials “E.E.A”. Some surface rusting to the blade but generally still good condition. Blade 89cms, overall 112cms. The Wilkinson Sword ledger gives details of the sword being finished on 19th December 1916 and purchased by E E Anderson Middlesex Yeomanry.
WW2 British Nickel Plated 2nd Pattern Fairbairn Sykes (F.S) Commando Knife by Wilkinson Sword Co Ltd, good example with nickel plated knurled grip and oval cross guard. Housed in its original leather scabbard with nickel plated chape, leather leg tabs and belt loop with elasticated strap. Good double edged blade with etched Wilkinson Sword Co Ltd London makers mark and reverse etched ‘THE F-S FIGHTING KNIFE’. The blade measures 16cms, overall 30 ¾ cms.
British 3rd Pattern Wooden Hilt Commando Knife, interesting black painted wooden handle with fourteen rings with brass stud nut fitting. Oval unmarked cross guard. Housed in leather scabbard with blackened lower chape. Leather belt loop tab with elasticated strap. Double edged blade with blued finish. Some evidence of sharpening to the tip. Blade 16 ¾ cms, overall 31cms.
Scarce Enfield Pattern Cutlass Bayonet, blade with German maker’s emblem and Sheffield inspectors stamps, regulation guard with Sheffield inspectors stamp, 2 piece chequered leather grips with spring catch, well-made replacement leather scabbard. Blade 67.4cms, pitted at tip and slightly shortened. Good condition.
Modern NATO Fairbairn Sykes (F.S) Commando Knife, good example with blackened finish, oval cross guard stamped ‘NATO NO 4658827 1977’ the other side with broad arrow and ‘SHEFFIELD ENGLAND’. Housed in its original scabbard. Double edged blade with all the original finish remaining. The blade measures 18cms, overall 30cms.
Scarce Variation of 2nd Pattern Luftwaffe Officers Dress Dagger by Waffenfabrik Max Weyersberg (W.M.W), being a good example of the variation with the squared scabbard. Dagger has the orange celluloid grip which retains the original grip wire. Pommel top with swastika to both sides. Complete with the original officers portepee attached. Standard eagle in flight cross guard. The variation squared scabbard has the original hanging rings. Plain double edged straight blade with the late ‘W.M.W’ trade mark for Waffenfabrik Max Weyersberg. The blade measures 24 ½ cms, overall 42cms.
WW1 and WW2 Family Medals, Paperwork and Royal Navy Officers Sword of Petty Officer Humphries HMS Royal Sovereign and Lieutenant R Humphries HMS Vanguard, the fathers medals consist of 1914-15 star ‘238923 W HUMPHRIES A.B RN’, British War and Victory medals ‘238923 W HUMPHRIES L.S R.N’ and George V Naval Long Service Good Conduct medal (Admirals bust) ‘238923 W HUMPHRIES P.O HMS ROYAL SOVERIGN’. Medals mounted for wear. The sons medals all unnamed as issued, 1939-45 star, Atlantic star with France & Germany clasp, Africa star with North Africa 1942-43, Burma star, Italy star, 1939-45 War medal and Elizabeth II Coronation medal. The medals are court mounted for wear. Accompanied by matching miniature dress medals and tunic ribbon bar. Housed in a card box with the name of Lieutenant Humphries and ‘VANGUARD’; Royal Naval officers sword being a universal pattern with the rear locket engraved ‘R. HUMPHRIES R.N’. Housed in the original scabbard. The sword blade is well worn with much of the etching absent. Original bullion sword knot attached to the guard. Framed and glazed commission document of Rosslyn Humphries, Brigade Orders for the Royal Navy and Royal Marines at the Coronation 1953, pair of officers shoulder boards etc. This grouping has come direct from the family and not offered for sale before.
Good Dutch Military Hanger Klewang, regulation curved single edge blackened blade cut with a single fuller, clip back tip, stamped HEMBRUG with maker’s stamp, regulation blackened iron guard, 2 piece wooden grips, in its leather scabbard stamped 8653A. Blade 82cms. Good condition, minor rust to blade and guard.
WW2 German Armed Forces Parade Bayonet by Carl Eickhorn, Solingen, standard issue parade bayonet with two piece black chequered grips, plated pommel and cross guard. Housed in the original blackened steel scabbard with leather hanging frog attached. The bayonet has an army officers dagger portepee / knot attached. Plain blade with deep struck fuller to the back edge. The blade has Carl Eickhorn, Solingen makers trade mark to the base. Blade measures 25cms, overall 40cms (not including frog). Good untouched as found example.
WW2 German 2nd Pattern Luftwaffe Officers Dress Dagger with Hanging Straps and Portepee, with white celluloid grip with the original wire binding. Pommel with swastika to both sides. Cross guard in the form of Luftwaffe eagle in flight. Officers dress knot / portepee attached to the grip. Housed in its steel scabbard with aluminium dagger ring bands. Attached to the scabbard is a set of brocade hanging straps with metal fittings having oakleaves relief. Plaine double edged blade with the reverse having a small etched ‘N’ to the base of the blade but no makers trade mark. Some staining to the blade. The blade measures 24 ¾ cms, overall 42 ½ cms.
British M1888 Lee Metford Mk1 Type 2 Bayonet, with two piece wooden grip, brass securing rivets with oil hole above the top rivet. Steel pommel, cross guard with muzzle ring. Blade with acceptance stamps. No scabbard. Blade 30 ½ cms, overall 42 ½ cms; Triangular socket bayonet housed in leather scabbard of issue. Socket fitting with acceptance stamps. Blade 45cms, overall 55 ½ cms. (2 items)
WW2 American Garand Bayonet, good used example of a American Garand bayonet housed in its original fibre scabbard. Top scabbard mount with some surface rusting but with US mark still visible. Standard blade with fuller to the back edge. Stamped to the forte with AFH US between flaming grenade. Blade 25 cms, overall 39 ½ cms.
1805 Pattern Naval Officers Sword, straight single edge blade etched with crowned GR cipher, royal arms, naval trophies and annunciate figures, brass stirrup hilt, langets engraved with fouled anchors, plain stepped pommel, wire bound black fish skin covered grip, in its brass mounted leather scabbard. Blade 76.5cms. Good condition, some age wear overall.
Bhutanese Sword, 19th Century, broad straight single edge blade constructed of ‘hair pin’ pattern welding, brass wire-bound grip of conventional form with plain iron pommel, in its leather covered scabbard with large brass chape. Blade 63.5cms. Basically good condition, some damage to cutting edge, some age wear overall.
WW1 German Model 98/05 Mauser Bayonet, good example with two piece wooden grips, steel pommel and cross guard. Housed in its leather and steel mounted scabbard. Attached to the scabbard is brown leather bayonet frog. Swollen blade with fuller to the back edge. Blade stamped with crown ‘EREFURT’ and reverse with Gottlieb Hammesfahr Solingen Foche makers mark. Blade spine with crown over W and 15. The blade measures 36 ½ cms, overall 53cms. Some surface rusting to the exterior fittings and some wear to the blade.Late Gordon Anderson collection
Third Reich Reichsarbeitsdienst (R.A.D) Enlisted Ranks Hewer / Dagger by Carl Julius Krebs Solingen, good untouched example with two piece stag horn grips. Plated grip mount and cross guard. House in the original scabbard with organisation emblem to the lower chape. Attached to the scabbard is the original black leather hanging strap with metal clip fitting. Blade with motto ‘Arbeit adelt’ and reverse side with acceptance stamps and makers trade mark of Carl Julius Krebs, Solingen. The blade measures 24 ½ cms, overall 40cms. Some surface rusting and patina to the exterior fittings.
British 1907 Prince of Wales Volunteers South Lancashire Regiment Regimentally Marked Bayonet by Wilkinson, two piece wooden grips, steel pommel with oil hole. Pommel stamped ‘2 PWV 223’ for the 2nd battalion of the Prince of Wales Volunteers South Lancashire regiment. Steel short cross guard with muzzle ring. Housed in its leather and steel mounted scabbard. 1945 dated webbing bayonet frog attached to the scabbard. Blade with fuller to the back edge, much of the blued finish to the blade. Crown over 1907 and ‘WIKINSON’ makers mark with various acceptance stamps. Blade 43cms, overall 57 ½ cms.
Loading...
