ENFIELD P 1888 DOUBLE EDGED BLADE BAYONET with metal mounted leather scabbard, blade stamped with crown over VR cypher and numbered 10-00, verso stamped 'EFD' with broad arrow, inspection stamp and X, 11.75in blade, 42cms overall, 44cms fully sheathed, brass riveted wooden grip, the scabbard bears no markings
We found 98577 price guide item(s) matching your search
There are 98577 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
98577 item(s)/page
RARE WW1 1907 PATTERN AUSTRALIAN HOOKED QUILLON BAYONET with metal mounted leather scabbard, the 16 and 7/8 L fullered blade stamped 'Lithgow' dated 1915 and shield stamp under a starred A, verso stamped twin starred As flanking an X stamp above the letter L within the shield, pommel numbered 22932, 55.5cms overall L, 57cms fully sheathed, the leather scabbard stamped 'HGR' with indistinct further markings
CHAPMAN SHEFFIELD 1903 DOUBLE EDGED BAYONET in metal mounted leather scabbard, the 12in blade stamped 'Chapmans Sheffield' with X, broad arrow marks and inspection stamp, the verso stamped '1903' with the No 3 being over stamped with inspection mark, faint crown over ER cypher with wooden grip, highly polished condition, 42.5cms overall L, 45cms fully sheathed
WW2 GERMAN THIRD REICH HITLER YOUTH DAGGER with original metal scabbard, Blut Und Ehre (Blood and Honour) etching and Hartkopf & Co Solingen with Ges.Geschutzt markings to the blade, chequered grip with enamel badge, 24.5cms L, original metal scabbard with leather top clip, blackening very scratched, 25.75cms fully sheathed
After Michelangelo (Italian, 1475-1564): A pair of late 19th century patinated bronze garniture figures of Giuliano and Lorenzo de Medicithe former seated looking to sinister, wearing Renaissance armour and holding a scabbard in his right hand, the latter seated on a stool with downcast head and pensive expression, both raised on marble plinth bases, 25cm high overall approximately (2)For further information on this lot please visit Bonhams.com
Late 19th / Early 20th Century Naval officers dress sword, having single fullered etched blade with gilt brass basket and shagreen wire twist grip handle and brass and leather scabbard, the blade measuring 31.45insSome minor damages to wire around handle, some minor rust marks to blade. Some wire on grip has come loose. Losses to gilding on grip and most of gilt on scabbard has worn away. Blade is in good condition. No information on history
A Victorian Scottish white-metal mouted regimental DirkWith tapering blade, notched and fullered along the back to the double-edged point, baluster wooden grip of swelling circular section carved with beaded Celtic interlace, the pommel-cap with glass cabouchon, in red velvet-covered scabbard with applied thistles and engraved crests and motto, with accompanying matching knife and fork, in a tole case with matching skean dhu and applied brass plaque inscribed 'Colin C.Mackenzie Esq, 79th Highlanders'. the dirk 43cm long.For further information on this lot please visit Bonhams.com
A Victorian silver-plated dirkWith tapering fullered blade, scalloped along the back edge, the hardwood baluster hilt with knotwork carving, the pommel set with faceted glass, in original wood-lined leather scabbard with accompanying knive and fork and relief cast thistle mounts, unmarked. blade 24.5cm long.For further information on this lot please visit Bonhams.com
THE GEORGE V CRUCIFORM-HILTED SWORD OF CAPTAIN THOMAS SINCLAIR KENNEDY, THE ROYAL SCOTS FUSILIERSCirca 1915 The 33 inch double fullered blade etched and engraved with panels of scrolling vines and thistles, one side with Royal crown and GR V cipher, the ricasso marked Watt/Saddler/Edinburgh; reverse with Royal crown and arms. Nickeled hilt of standard pattern, the guard inscribed T.S. Kennedy R.S.F. Grip bound in grey shagreen and brass wire. Brown leather-covered scabbard with nickeled throat and drag.Footnotes:Note: Purchased, March, 1983, Wallis & Wallis, Sale 282, Lot 1165.Captain Thomas Sinclair Kennedy, Lieutenant, 4th Battalion, Oct. 12, 1914; Temporary Captain, Railway Transport Officer, June 7, 1915; ordered to France, August 1915; Captain in 1917; relinquished his commission due to ill health, 6th Oct. 1918.For further information on this lot please visit Bonhams.com
Cavalry Sword. A cavalry sword and scabbard in somewhat corroded condition. Condition: please request a condition report if you require additional information regarding the condition of this lot. Condition Report: The scabbard is 85 cm long. The scabbard has pitting but no dents, but has been painted matt black at some time in its' past. The blade is 82 cm long and 3.3 cm wide. It would appear there is a 1 with a crown above stamped at the top of the blade. Postage: £40
A Victorian 1845 pattern infantry officer's sword by Hobson & Sons with single-edged fullered blade, blade length 84cm, detailed with foliate designs and 'Lieut Johnson, Duke of Edinburgh's Own Volunteer Rifles', gilt brass gothic style hilt and wire-bound fishskin grip (lacking scabbard).Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
A George IV 1822 pattern infantry officer's sword with pipe-back blade by Pitter & Fox, Bedford St, Covent Garden, London, blade length 83cm, gilt brass gothic style hilt, folding guard and wire-bound fishskin grip, with brass-finish scabbard.Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
An 1827 pattern Rifle Corps officer's sword with single-edged pipe-back blade, blade length 82.5cm, engraved with foliate designs and numerals 'LX' below a queen's crown, all-steel hilt with strung bugle and crown cartouche and wire-bound fishskin grip, with steel scabbard.Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
A 1908 pattern cavalry trooper's sword with straight single-edged fullered blade, blade length 89cm, steel bowl guard and moulded hard rubber grip, with steel scabbard (scabbard slightly misshapen and heavily pitted in places).Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
A Victorian 1895 pattern officer's dress sword by E. Thurkle, Soho, London, with dumbbell-section blade, blade length 82cm, nickel plated basket hilt and wire-bound fishskin grip, with leather scabbard (repairs to scabbard).Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
A George III period officer's sabre with curved single-edged blade, blade length 72cm, detailed with engraved foliate and trophy designs and 'G.R' cypher, gilt brass openwork hilt with crowned 'G.R' cypher, wire-bound leather grip and brass mask pommel, with brass mounted leather scabbard, the mounts engraved with 'Forward' and double-headed Imperial Eagle.Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
A George III 1796 pattern light cavalry trooper's sabre by Dawes of Birmingham, with curved single-edged blade, blade length 82.5cm, steel stirrup-type hilt and blackened leather grip, with steel scabbard.Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
A Victorian 1845 pattern infantry officer's sword by Firmin & Sons with single-edged fullered blade, blade length 82.5cm, brass gothic style hilt with 'VR' cypher and wire-bound fishskin grip, with brass scabbard.Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
A George III infantry officer's sabre with curved single-edged fullered blade, blade length 71cm, with overall foliate and other engraved decoration and 'GR' cypher, brass stirrup hilt with applied infantry badge and wire-bound grip, with brass mounted leather scabbard with engraved badge, detailed 'J. Dean No4 Strand'.Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
A Victorian 1821 pattern light cavalry officer's sword by W. Jones & Co, 236 Regent St, London, with single-edged fullered blade with double-edged tip, blade length 89.5cm, engraved with 'VR' cypher, detailed 'The King's Royal Irish 8th Hussars' and monogrammed for Charles Henry Gregg with family crest, triple-bar hilt and wire-bound fishskin grip, together with some research paperwork (lacking scabbard).Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
A Victorian 1892 pattern infantry officer's sword with dumbbell-section blade, blade length 83cm, brass gothic hilt and wire-bound fishskin grip, with steel scabbard.Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
A French AN XI cavalry trooper's sabre with curved single-edged fullered blade, blade length 87.5cm, brass triple-bar hilt and moulded leather grip, with steel scabbard.Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
A 1917 model bayonet by Remington, blade length 43cm, with scabbard, together with a 1907 pattern bayonet by Sanderson, blade length 43cm, with scabbard, and another 1907 pattern bayonet, blade length 42cm (lacking scabbard).Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
A George V 1897 pattern officer's dress sword by Armfield Ltd, Birmingham, with dumbbell-section blade, blade length 84.5cm, openwork basket hilt and wire-bound fishskin grip, with leather scabbard (rust to blade).Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
A late 19th century Omani katara with double-edged single-fullered blade, blade length 86cm, with etched animal mark, possibly a wolf, silver metal wire inlaid grip and square steel pommel, with silver mounted and embossed leather decorated scabbard.Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
An 1887 pattern Martini-Henry MkI sword bayonet, blade length 46.5cm, with chequered leather grip and steel mounted leather scabbard.Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
An 1876 pattern Martini-Henry 'Lunger' socket bayonet with triangular-section blade, blade length 54.5cm, and brass mounted leather scabbard, together with an 1853 pattern Enfield socket bayonet, blade length 44.5cm (lacking scabbard).Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
A fine George III 1796 pattern light cavalry officer's sabre by Thomas Gill with curved single-edged blade, blade length 82.5cm, with blued and etched decoration and detailed with a cavalryman on horseback, 'G.R' cypher and 'Gill's Warranted', cut steel stirrup hilt and wire-bound grips, with steel scabbard.Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.
A French 1822 model cavalry trooper's sabre with curved double-fullered blade, blade length 91cm, brass triple-bar hilt and wire-bound leather grip, with steel scabbard.Buyer’s Premium 29.4% (including VAT @ 20%) of the hammer price. Lots purchased online via the-saleroom.com will attract an additional premium of 6% (including VAT @ 20%) of the hammer price.

-
98577 item(s)/page