We found 89918 price guide item(s) matching your search
There are 89918 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
89918 item(s)/page
Giuseppe Longhi after Antoine-Jean Gros, engraving, 'Bonaparte at the Battle of Arcole', published 1798, visible sheet 48 x 32.5cm The painting presents a three-quarter-length image of Bonaparte, holding the flagstaff of the Armée d'Italie in his left hand and his sword in his right – on its blade is the inscription Bonaparte, Armée d'Italie. He is dressed in the dark blue trousers and tunic of a general of the First French Republic, with a gold-embroidered red collar. Beneath them he wears a white shirt and a black neckscarf. He also wears a gold-fringed tricolor cummerbund and a square-buckled belt bearing his empty scabbard. The background suggests the smoke of battle, with a few houses in the distance on the left. The land bordering the river is painted in dark tones, with a smoking cannonball still visible.The painting was commissioned by Joséphine, who was accompanying Napoleon in his Italian Campaign. Painted in Naples in 1796. Napoleon could reportedly not sit still for extended periods of time as a model for the portrait, Joséphine solved this by allowing Napoleon to sit in her lap and embracing him for the duration required by Gros. The painting passed through the collections of Napoleon himself and of Napoleon III before being sequestered after the fall of the Second French Empire in 1870. It was then reacquired by Napoleon III's wife Eugénie de Montijo in 1871, who eight years later gave it to the Louvre. It passed to the château de Compiègne in 1901, then finally the Palace of Versailles in 1938.
An 1822 pattern British Military Officer's sword with brass scabbard, VR cypher and etched blade with Roth & Freeman New Bond Street, London, approx overall length 98cms.Condition ReportThe scabbard has one small crease around half way down and some shallow dents near the frog, the gilt lacquer finish has worn away. The pommel is firm and does not jiggle, the wire mesh is worn away in several areas and the blade has some light pitting.
Einseitig geschärfte Klinge aus Eisen mit Hohlkehle. Gerade, vierfach gekantete Parierstange und muschelartiges Stichblatt. Sich konisch erweiternder Hirschhorngriff. Lederbezogene Holzscheide mit Eisengarnitur und eingeschobenem Beimesser korrspondierend mit Griff aus Hirschhorn. Klinge am Ansatz mit Schmiedezeichen. Scheide mit schwarzen Farbresten. Ges.-L. 54 cm.An Austrian deer hunting dagger with leather scabbard and small knife. Forging mark.Österreich. Wien. Mitte 19. Jh.
A Saber for Army Enlisted/NCO Maker E.u.F. Hörster, Solingen, nickel-plated, slightly curved blade with manufacturers logo on ricasso. Dove’s head pommel, black celluloid grip with silver wire wrap. Missing blade washer. Black lacquered scabbard. Blade 83 cm, overall ca. 97 cm.USA-Los – weitere Infos hier A Saber for Army Enlisted/NCO A Saber for Army Enlisted/NCOMaker E.u.F. Hörster, Solingen, nickel-plated, slightly curved blade with manufacturers logo on ricasso. Dove’s head pommel, black celluloid grip with silver wire wrap. Missing blade washer. Black lacquered scabbard. Blade 83 cm, overall ca. 97 cm.USA lot - more info hereCondition: II
A Saber for Army Officer “Zieten” Maker Eickhorn, Solingen, model no. 1734, nickel-plated, slightly curved blade with manufacturers logo on ricasso. Gilt lion-style pommel, decorated with inserted red glass eyes. Obverse languet depicting national eagle with folded wings. Backstrap, knuckle bow and ferrule decorated with oakleaf pattern. Black celluloid grip with silver wire wrap. Blade washer intact. Black lacquered scabbard. Blade 77 cm, overall ca. 94 cm.USA-Los – weitere Infos hier A Saber for Army Officer “Zieten” A Saber for Army Officer “Zieten”Maker Eickhorn, Solingen, model no. 1734, nickel-plated, slightly curved blade with manufacturers logo on ricasso. Gilt lion-style pommel, decorated with inserted red glass eyes. Obverse languet depicting national eagle with folded wings. Backstrap, knuckle bow and ferrule decorated with oakleaf pattern. Black celluloid grip with silver wire wrap. Blade washer intact. Black lacquered scabbard. Blade 77 cm, overall ca. 94 cm.USA lot - more info hereCondition: II
A Saber for Army Officer Maker WKC, Solingen, nickel-plated, slightly curved blade with manufacturers logo on ricasso. Plain-style pommel with oakleaf pattern, obverse languet depicting political style eagle with spread wings. Backstrap, knuckle bow and ferrule decorated with oakleaf pattern. Black celluloid grip with brass wire wrap. Blade washer intact. Black lacquered scabbard. Blade 82 cm, overall ca. 96 cm.USA-Los – weitere Infos hier A Saber for Army Officer A Saber for Army Officer Maker WKC, Solingen, nickel-plated, slightly curved blade with manufacturers logo on ricasso. Plain-style pommel with oakleaf pattern, obverse languet depicting political style eagle with spread wings. Backstrap, knuckle bow and ferrule decorated with oakleaf pattern. Black celluloid grip with brass wire wrap. Blade washer intact. Black lacquered scabbard. Blade 82 cm, overall ca. 96 cm.USA lot - more info hereCondition: II
A Saber for Army Officer No maker, nickel-plated, slightly curved blade. Gilt lion-style pommel, decorated with inserted red glass eyes. Obverse languet depicting national eagle with spread wings. Backstrap, knuckle bow and ferrule decorated with oakleaf pattern. Black celluloid grip with brass wire wrap. Blade washer intact. Black lacquered scabbard. Includes knot. Blade 87 cm, overall ca. 103 cm.USA-Los – weitere Infos hier A Saber for Army Officer A Saber for Army Officer No maker, nickel-plated, slightly curved blade. Gilt lion-style pommel, decorated with inserted red glass eyes. Obverse languet depicting national eagle with spread wings. Backstrap, knuckle bow and ferrule decorated with oakleaf pattern. Black celluloid grip with brass wire wrap. Blade washer intact. Black lacquered scabbard. Includes knot. Blade 87 cm, overall ca. 103 cm.USA lot - more info hereCondition: II
A Saber for Army Officer Maker Anton Wingen Jr., Solingen, nickel-plated, slightly curved blade with manufacturers logo on ricasso. Gilt lion-style pommel, decorated with inserted red glass eyes. Obverse languet depicting Wehrmacht-style eagle with spread wings. Backstrap, knuckle bow and ferrule decorated with oakleaf pattern. Black celluloid grip with brass wire wrap. Blade washer intact. Reverse languet with dedication “Dem Feldw. Echtler zum 1.12.38 Uffz. Korps 13. (J.G) J.R40”. Black lacquered scabbard. Includes knot. Blade 90 cm, overall ca. 104 cm.USA-Los – weitere Infos hier A Saber for Army Officer A Saber for Army Officer Maker Anton Wingen Jr., Solingen, nickel-plated, slightly curved blade with manufacturers logo on ricasso. Gilt lion-style pommel, decorated with inserted red glass eyes. Obverse languet depicting Wehrmacht-style eagle with spread wings. Backstrap, knuckle bow and ferrule decorated with oakleaf pattern. Black celluloid grip with brass wire wrap. Blade washer intact. Reverse languet with dedication “Dem Feldw. Echtler zum 1.12.38 Uffz. Korps 13. (J.G) J.R40”. Black lacquered scabbard. Includes knot. Blade 90 cm, overall ca. 104 cm.USA lot - more info hereCondition: II
An Ordnance Sword Maker Eickhorn, Solingen, nickel-plated, slightly curved blade with manufacturers logo on ricasso. Brass Dove’s head pommel, black celluloid grip with brass wire wrap. Blade washer intact. Underneath crossguard stamped with “118” below stick eagle, “10568” and “C.E./G” with Waffenamt stick eagle and “WaA253”. The edges of blade stamped with stick eagle and “18” and “2”. Scabbard stamped “10568”. Black lacquered scabbard. Includes knot. Blade 81 cm, overall ca. 97 cm.USA-Los – weitere Infos hier An Ordnance Sword An Ordnance SwordMaker Eickhorn, Solingen, nickel-plated, slightly curved blade with manufacturers logo on ricasso. Brass Dove’s head pommel, black celluloid grip with brass wire wrap. Blade washer intact. Underneath crossguard stamped with “118” below stick eagle, “10568” and “C.E./G” with Waffenamt stick eagle and “WaA253”. The edges of blade stamped with stick eagle and “18” and “2”. Scabbard stamped “10568”. Black lacquered scabbard. Includes knot. Blade 81 cm, overall ca. 97 cm.USA lot - more info hereCondition: II
A Sword for Police NCO Maker Herm. Rath, Solingen, nickel-plated, straight blade with manufacturers logo and SS runes on reverse. Nickel-plated hilt and crossguard, black wood-stained grip, silver police eagle, blade washer intact. Black lacquered scabbard with silver throat fittings. Includes knot. Overall ca. 101 cm, blade 74 cm.USA-Los – weitere Infos hier A Sword for Police NCO A Sword for Police NCOMaker Herm. Rath, Solingen, nickel-plated, straight blade with manufacturers logo and SS runes on reverse. Nickel-plated hilt and crossguard, black wood-stained grip, silver police eagle, blade washer intact. Black lacquered scabbard with silver throat fittings. Includes knot. Overall ca. 101 cm, blade 74 cm.USA lot - more info hereCondition: II
A 2nd Model RLB Enlisted Dagger Maker Paul Weyersberg & Co., Solingen, polished steel blade with manufacturer’s marking. Nickel-silver pommel and crossguard with stylized eagle, black wooden grip with insert metal starburst and enameled swastika. Black painted scabbard with nickel-silver fittings, leather suspension strap with metal clip marked “OLC”. Blade length ca. 22 cm, overall ca. 37 cm.USA-Los – weitere Infos hier A 2nd Model RLB Enlisted Dagger A 2nd Model RLB Enlisted DaggerMaker Paul Weyersberg & Co., Solingen, polished steel blade with manufacturer’s marking. Nickel-silver pommel and crossguard with stylized eagle, black wooden grip with insert metal starburst and enameled swastika. Black painted scabbard with nickel-silver fittings, leather suspension strap with metal clip marked “OLC”. Blade length ca. 22 cm, overall ca. 37 cm.USA lot - more info hereCondition: II
A Model 1933 SA Service Dagger Maker Puma, Solingen, polished steel blade with etched motto and manufacturer’s marking. Nickel-silver grip fittings and lower reverse cross-guard marked “Nrh” on reverse. Brown wooden grip with insert aluminum eagle and enameled SA emblem. Brown burnished steel scabbard with plated fittings. Brown leather hanger with clip. Age and wear to blade, grip and fittings. Rust and dent to scabbard. Length ca. overall 37 cm, blade 22 cm. USA-Los – weitere Infos hier A Model 1933 SA Service Dagger A Model 1933 SA Service DaggerMaker Puma, Solingen, polished steel blade with etched motto and manufacturer’s marking. Nickel-silver grip fittings and lower reverse cross-guard marked “Nrh” on reverse. Brown wooden grip with insert aluminum eagle and enameled SA emblem. Brown burnished steel scabbard with plated fittings. Brown leather hanger with clip. Age and wear to blade, grip and fittings. Rust and dent to scabbard. Length ca. overall 37 cm, blade 22 cm. USA lot - more info hereCondition: II
A Model 1933 SA Service Dagger Maker J. P. Sauer & Sohn, polished steel blade with etched motto and manufacturer’s marking. Nickel-silver grip fittings and lower reverse cross-guard marked “Mi” on reverse. Brown wooden grip with insert aluminum eagle and enamel SA emblem. Brown burnished steel scabbard with plated fittings. Brown leather hanger with clip. Dents in grip. Length ca. overall 37 cm, blade 22 cm. USA-Los – weitere Infos hier A Model 1933 SA Service Dagger A Model 1933 SA Service DaggerMaker J. P. Sauer & Sohn, polished steel blade with etched motto and manufacturer’s marking. Nickel-silver grip fittings and lower reverse cross-guard marked “Mi” on reverse. Brown wooden grip with insert aluminum eagle and enamel SA emblem. Brown burnished steel scabbard with plated fittings. Brown leather hanger with clip. Dents in grip. Length ca. overall 37 cm, blade 22 cm. USA lot - more info hereCondition: II
A Model 1933 SA Service Dagger Maker Gust. Haker, Solingen, polished steel blade with etched motto and manufacturer’s marking. Nickel-silver grip fittings and lower reverse cross-guard marked “He” on reverse. Brown wooden grip with insert aluminum eagle and enameled SA emblem. Brown burnished steel scabbard with plated fittings. Brown leather hanger with clip. Age and wear to blade, fittings and scabbard. Cracks and fading to grip. Length ca. overall 37 cm, blade 22 cm. USA-Los – weitere Infos hier A Model 1933 SA Service Dagger A Model 1933 SA Service DaggerMaker Gust. Haker, Solingen, polished steel blade with etched motto and manufacturer’s marking. Nickel-silver grip fittings and lower reverse cross-guard marked “He” on reverse. Brown wooden grip with insert aluminum eagle and enameled SA emblem. Brown burnished steel scabbard with plated fittings. Brown leather hanger with clip. Age and wear to blade, fittings and scabbard. Cracks and fading to grip. Length ca. overall 37 cm, blade 22 cm. USA lot - more info hereCondition: II
A GDR Dagger for Admirals Polished steel blade marked “03319”, washer intact, brass crossguard with acorns, brass pommel with national symbol, yellow celluloid grip, black finished scabbard with brass fittings decorated with oakleaf and national symbol. Gilt metallic fabric hangers on dark blue backing, gilt finish metal clip and buckles with oakleaf motif. Dagger length ca. 40 cm, blade ca. 25 cm. Red faux leather case with silver metal hinge closures, lined in blue rayon. Size ca. 43.5 x 17 x 5 cm.USA-Los – weitere Infos hier A GDR Dagger for Admirals A GDR Dagger for Admirals Polished steel blade marked “03319”, washer intact, brass crossguard with acorns, brass pommel with national symbol, yellow celluloid grip, black finished scabbard with brass fittings decorated with oakleaf and national symbol. Gilt metallic fabric hangers on dark blue backing, gilt finish metal clip and buckles with oakleaf motif. Dagger length ca. 40 cm, blade ca. 25 cm. Red faux leather case with silver metal hinge closures, lined in blue rayon. Size ca. 43.5 x 17 x 5 cm.USA lot - more info hereCondition: II
An MSVN Officers Dagger and Buckle Model 1939, no maker, polished steel blade, nickel-silver left-facing eagle pommel and crossguard, black inlay grip with obverse gilt metal fasces insert. Black painted scabbard with ribbed brass suspension fittings, removable screwtype ball point tip. Leather hangers, manufacturer on reverse with brass “M” and eagle in relief on clip. Gilt metal officer belt buckle with eagle surrounded by wreath and flanked by fasces on each side. Blade length ca. 20 cm, overall ca. 35 cm.Provenienz: Dave Webster Collection.USA-Los – weitere Infos hier An MSVN Officers Dagger and Buckle An MSVN Officers Dagger and BuckleModel 1939, no maker, polished steel blade, nickel-silver left-facing eagle pommel and crossguard, black inlay grip with obverse gilt metal fasces insert. Black painted scabbard with ribbed brass suspension fittings, removable screwtype ball point tip. Leather hangers, manufacturer on reverse with brass “M” and eagle in relief on clip. Gilt metal officer belt buckle with eagle surrounded by wreath and flanked by fasces on each side. Blade length ca. 20 cm, overall ca. 35 cm.Provenance: Dave Webster Collection.USA lot - more info hereCondition: II
A Type 97 Navy Officer’s Kai-gunto Antique blade shortened, now unsigned, circa 1700 with complex straight temper. The temper is difficult to see in areas, including the tip. There is slight damage to the tip. The scabbard is plain wood with a leather cover. Overall good condition with proper solid brown tassel. Cutting edge ca. 23 11/16”, overall ca. 37”.Provenienz: Dave Webster Collection.USA-Los – weitere Infos hier A Type 97 Navy Officer’s Kai-gunto A Type 97 Navy Officer’s Kai-guntoAntique blade shortened, now unsigned, circa 1700 with complex straight temper. The temper is difficult to see in areas, including the tip. There is slight damage to the tip. The scabbard is plain wood with a leather cover. Overall good condition with proper solid brown tassel. Cutting edge ca. 23 11/16”, overall ca. 37”.Provenance: Dave Webster Collection.USA lot - more info hereCondition: II
A Type 97 Navy Officer’s Kai-gunto The blade is the usual stain resistant steel type used in navy swords, with a cosmetic straight temper. The tang is not signed but has the naval Anchor stamp, and there is a painted assembly number of 120 on the tang, all parts are stamped A120 and matching. Overall, very nice condition with the desirable shagreen scabbard and nice solid brown tassel. Cutting edge ca. 24 15/16”, overall, ca. 37 ½”.Provenienz: Dave Webster Collection.USA-Los – weitere Infos hier A Type 97 Navy Officer’s Kai-gunto A Type 97 Navy Officer’s Kai-guntoThe blade is the usual stain resistant steel type used in navy swords, with a cosmetic straight temper. The tang is not signed but has the naval Anchor stamp, and there is a painted assembly number of 120 on the tang, all parts are stamped A120 and matching. Overall, very nice condition with the desirable shagreen scabbard and nice solid brown tassel. Cutting edge ca. 24 15/16”, overall, ca. 37 ½”.Provenance: Dave Webster Collection.USA lot - more info hereCondition: II
A Type 98 Army Officer’s Shin-Gunto The blade signed Tsuda Echizen (no) Kami Sukehiro, dated 8th month of Kanbun 12 or 1672, but it was made in the 1930’s and appears to be oil tempered. There is a dragon carved on one side of the blade and bonji and two thin grooves on the other. The handle has been replaced, there are two pegs close to each other and the handle rattles when held. There are spacers missing. The scabbard has numbers on the drag, they are probably patent numbers, this type of scabbard is rare. Overall, an interesting sword with dragon carving, wavy temper, and good blue and brown rank tassel. Cutting edge ca. 26 ¼”, overall length ca. 38 7/8”.Provenienz: Dave Webster Collection.USA-Los – weitere Infos hier A Type 98 Army Officer’s Shin-Gunto A Type 98 Army Officer’s Shin-GuntoThe blade signed Tsuda Echizen (no) Kami Sukehiro, dated 8th month of Kanbun 12 or 1672, but it was made in the 1930’s and appears to be oil tempered. There is a dragon carved on one side of the blade and bonji and two thin grooves on the other. The handle has been replaced, there are two pegs close to each other and the handle rattles when held. There are spacers missing. The scabbard has numbers on the drag, they are probably patent numbers, this type of scabbard is rare. Overall, an interesting sword with dragon carving, wavy temper, and good blue and brown rank tassel. Cutting edge ca. 26 ¼”, overall length ca. 38 7/8”.Provenance: Dave Webster Collection.USA lot - more info hereCondition: II
A Late Type 98 Army Officer’s Shin-Gunto The blade is oil tempered, has a Seki stamp, and is signed Kojima Kunifusa. It is not dated. The blade is in fair condition with staining and scuffing. The scabbard is black lacquered wood with a leather cover, the leather retention snap is still present on the handle. Cutting edge ca. 25 ¼”, overall length ca. 37 3/4”.Provenienz: Dave Webster Collection.USA-Los – weitere Infos hier A Late Type 98 Army Officer’s Shin-Gunto A Late Type 98 Army Officer’s Shin-GuntoThe blade is oil tempered, has a Seki stamp, and is signed Kojima Kunifusa. It is not dated. The blade is in fair condition with staining and scuffing. The scabbard is black lacquered wood with a leather cover, the leather retention snap is still present on the handle. Cutting edge ca. 25 ¼”, overall length ca. 37 3/4”.Provenance: Dave Webster Collection.USA lot - more info hereCondition: II
A Late War Wood Handled Army NCO Sword Variation #2 This is a rare very late war NCO sword. The blade has serial number 301805. It is the later type with a wooden scabbard. Cutting edge ca. 26 3/8”, overall length ca. 40 1/2”. Scratches and scuffs.Provenienz: Dave Webster Collection.USA-Los – weitere Infos hier A Late War Wood Handled Army NCO Sword Variation #2 A Late War Wood Handled Army NCO Sword Variation #2This is a rare very late war NCO sword. The blade has serial number 301805. It is the later type with a wooden scabbard. Cutting edge ca. 26 3/8”, overall length ca. 40 1/2”. Scratches and scuffs.Provenance: Dave Webster Collection.USA lot - more info hereCondition: II
-
89918 item(s)/page