We found 89932 price guide item(s) matching your search

A Victorian 1st Lancaster Rifles Volunteers dress sword, with wirework shagreen grip, pierced knuckle guard and engraved blade, inscribed 'J.B. Russell Esqr, First Rifle Lancaster', and with metal scabbard, length of blade 82cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Tarnishing to the metalware as expected, the leather washer is replaced, some discolouration to the shagreen and rubbing around the edges. The engraved detail is slightly obscured and rubbed but still readable and the scabbard has a painted finish with a few small dents.

A Victorian light infantry officer's dress sword, with wirework shagreen grip, pierced knuckle guard and engraved blade, inscribed 'To The Queen, Hawkes & Co, Piccadilly, London', with metal scabbard, length of blade 81.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. The edge of the shagreen is worn in parts, noticeably where it meets the pommel, tarnishing to the metalwork throughout, pitting to the blade and light pitting to the scabbard.

A George V Royal Artillery officer's dress sword, with wirework shagreen grip, pierced knuckle guard, engraved blade and leather scabbard, length of blade 86cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some minor rubbing and losses to the shagreen at the edges, a rough section to the upper portion of shagreen where it meets the pommel. Some rusting and general surface wear to the metalwork, pitted blade with some rusting throughout. The scabbard has a lacquered or painted finish and has an associated leather belt loop attachment.

A Victorian 4th Volunteer Brigade Liverpool Regiment dress sword, with wirework shagreen grip, pierced knuckle guard and engraved blade, complete with metal scabbard, length of blade 83cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Tarnishing to the metalwork, surface wear throughout. Wirework loose to the shagreen grip and missing in parts. Some wear to the raised parts of the shagreen grip, A couple of small edge dents to the knuckle guard, some light pitting to the blade, slightly obscuring with rust at the lower section. The scabbard is significantly pitted and rusted.

A George V Royal Artillery officer's dress sword, with wirework shagreen grip, pierced knuckle guard and engraved blade, with leather scabbard, length of blade 86cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Heavy wear to the metalwork including some surface pitting and rust. Discolouration to the shagreen noticeably to the raised parts and this is very worn in areas. Heavy pitting noticeably to the side of the blade that is inscribed 'Royal Artillery' obscuring the decoration. Further pitting throughout. An associated frog is present to the scabbard which itself has significant surface wear and the end of the scabbard is a modern home-made repair.

A late 19th century British artillery officer's dress sword, with wirework shagreen grip, pierced knuckle guard and engraved blade, in metal scabbard, length of blade 81cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Pitting to the metal work and some surface knocks, shagreen overall in good order, light pitting to the blade with only a few very small nicks, pitting to the scabbard with a few small dents.

A home-made sword, with lion head pommel, checkered grip, three bar guard, tapering blade and metal scabbard, length of blade 74.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. This is a home-made piece using various component parts and also with parts made by the enthusiastic amateur themselves.

A 1908 pattern military issued cavalry sword, with checkered leather grip with recessed thumb mould, bowl guard and tapering blade, stamped with military broad swords and 'FED', also '75' beneath a crown and stamped 'P08' to the blade back, and with metal scabbard, length of blade 88cm. CONDITION REPORT: Patina but no pitting, replacement washer, no movement, crack at base of hand guard, scabbard quite bent, blade reasonably straight. PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service.

A late 19th century dress sword, with scrolling pommel, wirework grip and slightly tapering blade housed in an ornate embossed and leather scabbard, unnamed, length of blade 72cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. General pitting to the blade commensurate with age, some tarnishing to the metalwork, the scabbard has come loose at some stage and been reglued, it feels very dry and shows signs of heavy use. Areas of tarnish to the mounts.

A late 18th/early 19th century dress sword, with all brass grip and guard and engraved steel tapering blade with partial leather brass mounted scabbard, length of blade 77cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some tarnishing to the brass work commensurate with age, the guard is slightly misshaped. General pitting to the blade with slight traces of original blueing and gilt. The scabbard is missing the end section and is in poor condition.

A 19th century naval sidearm, with wirework shagreen grip, simple D-guard, tapering blade and metal scabbard, length of blade 43cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some pitting and surface wear to the guard. One side of the shagreen is badly rubbed leaving small sections missing to the raised parts and slightly misshaping to the wirework, pitting to the blade, heavy pitting to the scabbard.

A Victorian British naval cutlass, with deep checkered grip, figure of eight guard and slightly tapering blade, stamped 'V.R. Mole', with associated leather scabbard, length of blade 74cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Light surface ware and pitting to the grip and guard, light pitting to the blade which has not been sharpened, the scabbard is a replacement.

An early 20th century clip point cutlass, with walnut grip, pierced guard and curved blade, stamped 'Hembrug', with leather scabbard, the guard bearing plaque stamped 'P.A.O.754', length of blade 61cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Heavy tarnishing and discolouration to the crude guard, general surface scratches to the wooden grip. Some pitting to the blade and the tip of the blade is very slightly misshapen. Leather scabbard intact with frog, although the end section where it meets the guard is replaced, quote heavy wear to the leather throughout.

A late 19th/early 20th century naval sabre, with wirework shagreen grip, lion head pommel and hinged side guard with slightly curved blade, in leather scabbard, length of blade 74cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Shagreen is in good condition. Minor surface wear to the brass and some surface pitting. Some pitting to the blade. The leather work on the scabbard has been crudely stitched and could probably be modern but with the original mounts. Scabbard is inscribed 'Salter, Sword Cutler to H.R.H. The Duke of Sussex, London'.

An early 19th century German hunting short sword with replaced antler grip, shell moulded guard, and finely engraved blade decorated with bears, a mountain goat, and fox mask, with leather and brass scabbard, length of blade 48cm, overall length 69cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service.

An early 19th century court sword, with embossed pommel, woven grip and mask shell, with triangular blade and scabbard, length of blade 73.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some tarnishing to the metalwork, the grip is slightly loose throughout. PItting to the blade and the tip of the blade has been broken off and is missing. The scabbard is in poor condition having been painted and repaired.

An early 18th century court sword, with cut steel decoration, captive bead decoration to the guard and with triangular sectioned blade retaining original blue and gilt engraved detail, with partial scabbard, length of blade 81cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. One bead of cut steel missing to the pommel, a row of cut steel beads missing to the grip, a broken guard knuckle bow.

A late 19th century French gladius, with ribbed brass grip, no.560, and shaped blade indistinctly stamped and dated 1832 within a brass capped leather scabbard, also no.560, length of blade 49cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. General wear to the brass with rubbing and bruises to the raised parts, some light pitting to the blade, light general wear to the scabbard.

A late 19th century French gladius, with ribbed brass grip, slightly shaped blade and all brass scabbard, length of blade 39.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. General knocks and wear to the brass, pitting to the blade and a few knocks to the blade edges. Leatherwork replaced to the base of the blade and the frog is a crude modern replacement. A few dents to the scabbard.

A late 19th century French gladius, with ribbed brass grip and shaped steel blade, stamped 'W' beneath a star, with leather brass cap scabbard, length of blade 49cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. General pitting and surface scratches and dents to the brass handle. pitting to the blade with several small chips to the blade edge. The scabbard has a split from its stitching and is quite dry in its appearance and a few dents to the brass mounts.

A late 19th century French saw back gladius, with ribbed grip, indistinctly no.30? and with saw back blade, indistinctly stamped, within a leather metal mounted scabbard, length of blade 49cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. General pitting and surface wear to the brass handle, some pitting and surface wear to the blade, general light surface wear to the scabbard.

A late 19th century French gladius, with nickel silver finish, ribbed grip and tapering blade in leather scabbard, length of blade 46cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. General surface wear, light pitting to the blade and general surface wear to the leather scabbard.

An late 19th century French gladius, with nickel silver finish, ribbed grip and tapering blade in leather scabbard, length of blade 46cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. General surface wear, light pitting to the blade and general surface wear to the leather scabbard.

A 19th century French gladius, with ribbed grip, blade stamped 'Talabotes, Paris', with leather scabbard, numbered to the metal mount indistinctly, possibly 1440, length of blade 48cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Surface wear and rubbing discolouration to the grip and mounts, a dent to the scrolling ends of the guard, pitting to the blade, general surface wear to the leather work and surface wear commensurate with age.

A 19th century French gladius, with ribbed brass grip, scrolling crossguard and shaped blade, stamped 'Jany 1832' to one side with indistinct inscription to the reverse and no.5345 with previous numbers crossed through and with leather scabbard, length of blade 48.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing and and courier service. Pitting and knocks and bruises to the metal, noticeably on the crossguards there are a few hatchet marks, pitting to the blade, heavy surface wear tot he scabbard with scratches and indentations.

An early 19th century French light cavalry sabre, with leather grip, brass knuckle guard and curved blade, indistinctly stamped to the back and dated 'Fevrier 1816', with metal scabbard, length of blade 86cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Quite heavy wear to the leather where it has perished in parts. General surface knocks and bruises to the brass. Light pitting to the blade with a few nicks to the blade edge. Quite heavy pitting throughout the scabbard.

A late 19th century French light cavalry sabre with wirework leather grip, pierced brass guard, stamped and no,1270, and curved blade with indistinct inscription to the back blade, with metal scabbard, length of blade 91cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. A few knocks and bruises to the brass. Light pitting to the blade with a few tiny nicks to the blade edge. Some pitting and a few dents to the scabbard.

A mid-19th century French boarding sabre, with simple grip, shaped knuckle guard and shaped blade engraved with anchors to both sides and indistinctly inscribed and dated January 1842 to the back blade, with partial leather scabbard, length of blade 67cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Surface wear and a few dents to the guard and pitting where this has been painted or lacquered. Pitting to the blade with small nicks to the blade edge. The end cap section of the scabbard is missing, wear to the remaining part.

An 1808 pattern French marine cutlass, with ribbed brass grip, curved blade and leather and brass mounted scabbard, length of blade 64cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Quite heavily worn to the grip losing some of the definition, some residue of lacquer work to the grip, also some damage where the blade meets the hilt on the hilt itself. General surface wear and heavily pitted blade, general surface wear to the scabbard with crude repair to the base end.

An 1808 pattern French marine cutlass, with ribbed brass grip, curved blade and leather and brass mounted scabbard, length of blade 58cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Minor wear to the grip, heavily pitted blade with some chips to the blade edge and with surface wear to the leather scabbard. The belt clip no.114.

A circa 1900 German machete, with stud decorated horn grip and shaped blade inscribed 'No.87', also inscribed 'Fernando Esser' to one side and 'Fernando Esser Elberfeld Warranted' to the reverse, in leather scabbard, length of blade 62.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some scratches to the horn grip and splits to both the back and front, pitting to the blade. Surface wear to the scabbard with some areas of loss to the leather.

A WWII period German sword, with bakelite ribbed grip, pierced knuckle guard decorated with an eagle and with pipe back unsharpened blade, stamped 'W.K&Co', length of blade 84cm, with metal scabbard. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some pitting to the knuckle guard and a few bruises and knocks, the grip is ok with very light surface scratches and the blade is basically good.

A WWI period German officer's sword, the oak leaf decorated pommel with wirework ebonised grip, simple guard and hinged side guard decorated with an eagle, the blade back inscribed 'E&F Horster, Waffenfabrik, Solingen', also similarly stamped to the base of the blade and with metal scabbard, length of blade 85cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Overall in good condition, some pitting to the metalwork, some surface wear to the ebonised grip and a greasy residue to the blade. Some small dents and surface marks to the scabbard.

A WWI period German officer's sword, with stepped pommel, wirework ebonised grip and hinged guard decorated with The Black Prince above a shield and with tapering blade, housed within a metal scabbard, length of blade 80.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Finger loop remaining intact, light pitting to the metal work and a few knocks to the raised parts, sticky residue to the blade, apparently unnamed.

A WWI period German band sword, with brass grip, scrolling guard and tapering blade stamped 'W.K&Co', with leather brass mounted scabbard, length of blade 49cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some pitting to the brass handle, traces of engraved detail to the blade but now almost obscured due to pitting, light wear to the scabbard.

A late 19th century German light cavalry sabre, with moulded grip, pierced knuckle guard and curved blade stamped 'Fabrica de Armas de W.R. Kirschbaum, Solingen', with metal scabbard, length of blade 81cm. CONDITION REPORT: The grip, guard and scabbard have been painted black. pitting to the blade with a few nicks to the blade edge. Large dint and smaller dints to the scabbard. No movement. PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service.

An early 20th century German officer's sabre, with wirework ebonised grip, P-shaped decorated guard, slightly curved blade stamped to the blade back 'E&F. Horster, Waffenfabrik, Solingen', with metal scabbard, length of blade 77cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. The wirework lifting in parts to the grip, general surface wear to the metal work, light pitting to the blade with a few nicks to the edge. The scabbard has a black lacquered finish or paint to it and has a few small dents.

A German Third Reich Luftwaffe officer's dress sword with Paul Weyersberg & Co of Solingen blade, wire work ribbed grip and leather scabbard, length of blade 66.5cm, overall length 89cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service.

A Russian shaska, with shaped pommel stamped 'CCCP', wrythen carved wooden grip, curved blade and leather and brass mounted scabbard, complete with spike bayonet, length of blade 81cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Various stamps and numbers throughout including date 1934, also stamped 13KR302HL, pitting to the metalwork and some surface wear to the wooden grip, pitting and light wear to the blade and some scuffing to the leather scabbard. Each section of the leather scabbard is stamped 'W'.

A Russian sabre, with wrythen carved wooden grip, plain guard, curved blade and leather scabbard complete with spike bayonet, bearing various Cyrillic stamps, length of blade 87cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Tarnishing and small dent to the pommel, letter A stamped throughout to all parts, some surface wear to the wooden grip and general surface knocks. The base of the blade is no.1910, with various other stamps. Pitting to the blade, Some surface scratches to the scabbard, quite heavy in parts where the leather has actually split.

A 19th century Danish light cavalry sabre, with wirework leather grip, pierced brass knuckle guard and shaped blade stamped 'Alex. Copple, Solingen', with back blade stamped 'C' beneath a crown, and with metal scabbard, length of blade 87cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. General surface knocks to the brass and light surface scuffs to the leather work, some light pitting to the blade with a few small nicks to the blade edge and light pitting to the scabbard.

A 19th century Indian tulwar, with domed pommel, shaped grip and curved blade, in cloth bound scabbard, length of blade 76cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Surface wear and pitting throughout, heavy pitting to the lower section of the blade, a few nicks to the blade edge. The scabbard although fits, is a replacement, and shows general signs of wear.

An early 19th century Turkish heavy cavalry sabre, with checkered grip, thumb recess and moon and star pierced guard with slightly tapering blade engraved to the lower end, with scabbard, length of blade 83.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Surface wear and slight raising to the scales. Heavy wear to the guard and a small dent above the star. Pitting to the blade. Several dents to the scabbard and heavily pitted.

A 19th century Sudanese kaskara, with rounded pommel, simple grip and stud decorated crossguard with tapering blade within an embossed leather scabbard, length of blade 67cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Quite crude construction as you would expect. Surface scratches to the pommel. Heavy wear to the cross guard, pitting and wear to the blade. General surface wear to the scabbard with heavier wear to the end. Probably replaced metal cap to end of scabbard.

A late 19th/early 20th century Chinese short sword, with detailed brass pommel, shaped fluted wooden grip and tapering blade within a black lacquered and decorated brass set scabbard, length of blade approx 47cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some wear to the metalwork throughout, slight lifting to the grip. General pitting to the blade and chips to the edges. The scabbard has been re-black lacquered and there are some small areas of damage to the mounts.

A circa 1900 Chinese dadao, with wrought iron loop pommel, string work long grip and slightly curved blade housed in a leather and vellum scabbard, length of blade 54.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. The wrought iron loop is very crude and part of the string work is lacking around the grip where it meets this loop. General wear throughout. Some pitting to the blade commensurate with age and with a very small chip to the blade at the end. General surface wear to the scabbard. Total length approx 87cm, approx 5mm thick at forte, approx 4mm thick towards middle of blade, and weighs approx 850g.

A 19th century American light cavalry sabre, with wirework leather grip, pierced knuckle guard and curved blade, in metal scabbard, the blade stamped 'US' with an indistinct date, length of blade 87cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. A few surface knocks and scratches to the brass work. The raised parts of the leather are scuffed and there is a small split to the leather. Light pitting to the blade with a few nicks to the blade edge and pitting to the scabbard.

A 19th century American light cavalry sabre, with wirework leather grip, pierced brass knuckle guard and curved blade stamped 'US, JCR, N.P. Ames, Cabotville, 1845', and with metal scabbard, length of blade 90cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. A few small dents and knocks to the brass work, a few small scuffs to the leather work, very minor pitting to the blade, light pitting to the scabbard.

A mid to late 19th century French heavy cavalry sword, with wirework and leather grip, brass knuckle guard and tapering steel blade, with indistinct inscription to blade back and bearing various stamps to the guard and blade, within a metal scabbard no.619, length of blade 96cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Some pitting and knocks to the metalwork, light pitting to the blade, a few scuffs to the leatherwork on the grip and light pitting to the scabbard.

A Zubco of Spain American issue 20th century presentation sabre, with moulded grip, pierced guard and detailed engraved blade, inscribed 'Colonel Hugh S Finlaysou, Jr', within a metal scabbard inscribed 'Professor of Military Science', length of blade 75.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Minor pitting and minor surface wear but overall presented in good order.

A Victorian Rifles 1827 pattern officer's sword, the blade with VR cypher and 'By Appointment' below Prince of Wales feathers, the pierced guard with bugle crest, shagreen and wire-work grip, length of blade approx. 81.5cm, in metal scabbard. CONDITION REPORT: Please be aware that the images for lot 730 and 733 were the wrong way round. They have now been rectified.PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service.

A George IV dress sword with shagreen grip, pipe back blade and partial scabbard, overall length 95.5cm (af). CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service.

An early 19th century Mameluke, with shaped ivory grip, crossguard, curved blade and metal scabbard, length of blade 75.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. There are crude repairs to the ivory, one around the pommel area, a small one around the ring and a larger section where it meets the cross guard. There are also cracks and splits to the ivory throughout. Pitting to the metal guard, light pitting to the blade and further pitting and small dents to the scabbard.

An early 19th century machete, with ribbed moulded brass handle and crossguard stamped '12.A.F.2.62', and with shaped blade stamped with a crown to one side, with a leather scabbard with matching numbers to the metal end, length of blade 47.5cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Normal surface pitting and wear, the two metal pins are white metal and may have been replaced. A few knocks and bruises throughout. Pitting to the blade with a few small nicks. Surface wear to the leather with a split down the spine approx 5cm. Further scratches to the leather and dents to the metal mounts.

A 19th century naval officer's dress sword, with wirework shagreen grip, lion mask pommel, hinged guard and engraved blade inscribed 'Rob. Mole & Sons, Birmingham', with leather metal mounted scabbard, stamped to the blade back 'M2277', length of blade 78cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Slight discolouration in some parts to the shagreen grip with a 2mm x 2mm section missing towards the pommel and a few small tiny sections missing along the hilt. General surface wear to the metal, pitting to the blade in parts. The leather work has surface scratches to the leather scabbard, small splits in part and dents to the metal mounts.

A group of swords and blades including a Spanish cross-hilted example with engraved Toledo blade and woven grip, two partial swords, a small triangular sectioned sword blade with traces of engraved detail, a further small triangular sectioned sword blade, two sabre blades, a distressed and damaged blade and a loose scabbard (10). CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service.

A large late 19th century naval cutlass bayonet, with checkered grip, bowl guard and slightly curved blade in leather scabbard, length of blade 67cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Heaving pitting the the metal sections, a rough finish to the edges of the grip, heavy pitting to the blade and numerous chips to the blade edge. Some creases to the leather scabbard but scabbard ok.

An 1879 pattern saw back bayonet with checkered grip, simple guard serrated half backed blade and leather scabbard, the blade with broad arrows mark and stamped 'WD', with various further numbers stamped to the opposing side, length of blade 65cm. CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Pitting and surface wear to the metal, some rubbing to the checkering to the raised parts as expected. Some pitting and a sticky residue to the blade, some surface wear to the scabbard with rough sections.

A late 19th century brass gripped bayonet with push button action and leather scabbard and a further brass bayonet, stamped M48 to the langet (2). CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Bayonet has much reduced press stud and spring mechanism to side of hilt, not much action to spring at all and will require some attention, no locking catch apparent but please study images.

A late 19th century brass handled bayonet with blade stamped 'Alex Coppel Solingen', and with various marks to the hilt and scabbard, a further bayonet with Solingen blade in leather scabbard, a third Middle Eastern bayonet in scabbard and a further bayonet without scabbard (4). CONDITION REPORT: PLEASE NOTE: we are unable to post this lot using our own in-house packing and postal service. Please arrange your own packing/courier service. Both the left and right bayonets have a blade length of 46.5cm.