1950s Queen Elizabeth 11 Court uniform comprising bitcorn hat, tailcoat with gilt brass Royal Arms buttons , trousers,patent leather boots,sword belt and gilt metal court sword with etched blade and patent scabbard,gloves and boot pulls contained in japanned trunk with brass label engraved ‘Ronald Hamilton Esq’
We found 89918 price guide item(s) matching your search
There are 89918 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
89918 item(s)/page
A Michael Sutty limited edition military figure 'Welsh Guards', No 124/250, 32cm CONDITION REPORT: In overall good condition, no chips or nibbles, two small marks to the back of the tunic - one at the shoulder and one slightly lower - possibly glaze flaws. Discolouration to the base around the boots, some amber coloured glue residue at the tip of the sword where it meets the base, but no evidence of a break so could be as made. 3cm scuff to the top of the scabbard but appears to be under glaze so probably intentional. Otherwise light wear throughout, would benefit from a clean.
A Michael Sutty limited edition military figure 'Scots Guards 1980's', No 127/250, 29cm (swagger stick detached but ok - the glue has dried) CONDITION REPORT: Overall good condition, no obvious chips, cracks or restoration evident. Slight bend to the top of the swagger stick, stick is loose and has glue residue towards the bottom, there is no corresponding residue on the body of the figure so stick may not be original. Position of the hand also suggests this, brown discolouration to base around boots (possibly intentional) White belt holding the sword scabbard has open ends which look to have been glued closed originally. Otherwise light wear throughout, would benefit from a clean.
dating: Third quarter of the 19th Century provenance: England, Round, rifled barrel, with test-bed stamps, adjustable rear sight, fore-sight and clutch for a bayonet; typical bolt with various stamps. Forward spring lock, marked 'TOWER 1860' and with crowned 'VR'. Wooden, full stock with brass mounts. No ramrod. Bayonet with scabbard with leather belt frog. length 124 cm.
dating: about 1880 provenance: Papal States, Rifled, round, 12 mm cal. barrel, with octagonal base, Papal State stamp, Liege test-bed stamp, various stamps and serial number 'FI 12377', adjustable rear sight, fore-sight and clutch for a bayonet; frame marked 'BREVET REMINGTON 8319', 'EM & L NAGANT A LIEGE', matching serial number and stamps; wooden, full stock in two pieces. Iron mounts and ramrod. Complete with bayonet with scabbard. length 131 cm.
dating: 1886 provenance: Austria, Round, rifled, 8 x 60 cal. barrel, with fore-sight, clutch for a bayonet, adjustable rear sight. Bolt with Steyr marking and date '1886'. Wooden, full stock with tubular magazine inside, iron ramrod on the left side of the arm. Iron mounts. Complete with yatagan-bayonet (59.5 cm length), with scabbard. length 132.5 cm.
dating: about 1870 provenance: St. Etienne, Round, rifled, 17 mm cal. barrel, with adjustable rear sight, fore-sight and clutch for a bayonet, base with stamps; bolt with internal stamps; backward spring lock, signed 'M.re Imp.ale de St. Etienne' and with stamp. Wooden, full stock with iron mounts and ramrod, base for peep sight on the back. Complete with yatagan-bayonet with iron scabbard. length 126.5 cm.
dating: about 1880 provenance: Tulle, Rifled, round, 11 mm cal. barrel, with octagonal base, various stamps, adjustable rear sight and fore-sight, clutch for a bayonet. Bolt action in working order. Various stamps, serial numbers and marking. Model and conversion caption (1866-74), Tulle imperial manufacture and modification 'M80'. Wooden stock in two pieces, with iron mounts. Complete with bayonet and iron scabbard. length 131.5 cm.
dating: 1886 provenance: Germany, Round, rifled, 11 mm cal. barrel, with octagonal breech, fore-sight and adjustable and foldaway rear sight, remains of finishing. Bolt action, mechanics in working order. Various marking, among which model, crowned 'SPANDAU' and 'FW', date '1887', various German stamps, serial number '84xx'. Wooden, full stock with iron mounts, barrel bracket with slot for a bayonet. Bayonet with scabbard. length 129 cm.
dating: about 1870 provenance: England, Round, rifled, cal. 577 barrel, with various stamps at the base, adjustable rear sight, fore-sight and clutch for a bayonet; bolt with stamps and marking 'III'; forward spring lock, marked '1863 Enfield' and crowned 'VR'; wooden, full stock with brass mounts, iron barrel bracket and ramrod. Socket-bayonet with remains of scabbard. length 137 cm.
dating: 1875-1890 provenance: England, Round, rifled, 11 mm cal. barrel, finished, with octagonal base, with stamps and 'EE32'; lock marked with crowned 'LSA Co.' and with stamps. Wooden, full stock with iron mounts and ramrod. Together with two, portable bayonets, socket and normal, both with leather scabbard and metal mounts. length 124.5 cm.
dating: 1878 provenance: Torino, Rifled, round, finished, cal. 10.4 barrel, octagonal base, marked 'TORINO','PP', '1881', with various stamps and serial number 'AE9911'; adjustable rear sight and fore-sight; stock with matching serial number. Ramrod. Complete with bayonet with a scabbard (DI 3772). length 135 cm.
dating: 1886 provenance: Portugal, Round, rifled, 8 mm cal. barrel, with octagonal breech, fore-sight, foldaway rear sight. Bolt action, marking 'CE WFG STEYR / 1886', 'M. 1886', crowned monogram 'L.I°' (Louis I). Walnut, full stock. Tubular magazine. Serial number 'A615'. In working order. Complete with bayonet with scabbard. length 116 cm.
dating: Late 19th Century provenance: Swiss, Round, rifled, 7.5 mm cal. barrel, with fore-sight and adjustable rear sight, stamped with 'P', a cross, and serial number '46527'; sliding bolt with loading lever, provided with wooden handle; frame with grooves; wooden, full stock with two, short grooves under rear sight; iron mounts, extractable magazine, butt-plate stamped with a cross. Finished. Complete with bayonet with scabbard and belt frog. length 130 cm.
dating: 1867 provenance: Mutzig, Round, rifled, 11 mm cal. barrel (shining barrel), with octagonal base, marked with various stamps, among them 'AF', 'C', 'M' both crowned, 'MI', serial number 'D-184xx' and date 'M 1867', adjustable rear sight, fore-sight and clutch for a bayonet. Typical bolt with the same serial number and marking 'MANIFATTURE IMPERIALE Mutzig M.LE 1866' and stamps. Wooden, full stock with iron mounts (stamped) and ramrod. Leather strap. Complete with a bayonet of the same year, provided with scabbard and serial number 'F-75557'. length 131 cm.
dating: about 1870 provenance: Austria, Wide, slightly curved, single-and false-edged blade with flat base and right side with a fuller. Tang marked 'JOH. BLACINCIZ & SÖHNE WIEN WEYERSBERG & STAMM SOLINGEN', and, on the other side 'EISENHAUER'. Iron hilt, richly engraved and pierced, long cap and wooden grip, covered with reptile skin and metallic wire binding. Wooden scabbard with one ring and suspension loop. length 99 cm.
dating: Second quarter of the 19th Century provenance: Austria, Wide, curved, single-and false-edged blade with large, central fuller, first part engraved with trophies and floral motifs. Iron hilt with fix loop-guard and another movable. Two openings for the sword-knot, long cap, leather-covered grip with remains of copper wire binding. Iron scabbard with two suspension rings on round bands. length 95 cm.
dating: Mid 19th Century provenance: Austria, Curved, single-and false-edged blade with large, central fuller, engraved with inscription 'Erinrung am 13. 14. 15. Marz' on one side, and date '1878' with barely readable inscription on the other. Iron, mono-quillon hilt, with langets, loop-guard and cap decorated with foliage. Wooden, leather-covered grip without wire binding. Iron scabbard with two suspension rings on rounded bands. length 96.5 cm.
dating: Second quarter of the 19th Century provenance: France, Curved, single-edged blade, with fuller, slightly enlarged on the false edge, with fuller as well, and provided with a thin, rear groove. Brass hilt with remains of gilding, partially pierced guard, with floral decoration. Short cap with laurel branches. Horn grip without wire binding. Leather scabbard (small damages, signs of use and time) with brass mounts (remains of gilding) and two lugs. length 90,5 cm.
dating: 1846 provenance: France, Curved, single-edged blade, with fuller, slightly enlarged on the false edge, with fuller as well and with a thin groove on the back. Stamped at the tang with 'B' surmounted with stars and crowned 'L'. The back signed 'M.re R.le de Chatellerault Mai 1846'. Gilded, brass hilt signed 'ROUART A PARIS' (some part of the gilding missing), partially pierced guard, with floral decoration. Short cap with laurel branches. Ebony grip, no wire binding. Leather scabbard (small damages, signs of use and time), with brass mounts, with remains of gilding, two lugs, iron chape button. length 92 cm.
dating: circa 1800 provenance: France, Wide, slightly curved, single-and false-edged blade, base engraved with an anchor on both sides, back marked 'Varnier et Comp.e'. Brass hilt with three loop-guards, long cap and wooden, leather-covered grip, with metallic wire binding. Leather scabbard with brass mounts. length 81 cm.
dating: 19th/20th Century provenance: France, One cavalry sabre Mod. 1822, marked St. Etienne, with iron scabbard. One similar, mod. 1822, with Coulaux in Klingenthal signature on the back, iron scabbard and leather sword-knot. Two sabres Mod. 1845, one with date 1861 and iron scabbard, one without scabbard. Two sabres model 1882, both with scabbard. One Coulaux in Klingethal sword with monogram 'PS' on the cap, iron scabbard and leather sword-knot. Two officer's swords, one of 1830, with rooster emblem, one of abt. 1860 with scabbard. length 91 - 109,5 cm.
dating: Early 19th Century provenance: France, Curved, single-and false-edged blade, with large, central fuller, marked on the back 'BARISONI'; brass hilt with langets, three loop-guards and long, smooth cap; wooden, leather-covered grip, no wire binding. Iron scabbard with two suspension rings. length 102 cm.
dating: late 18th Century provenance: France, Curved, single-and false-edged blade, with large fuller, small tang; brass hilt with stirrup-guard, rhomboid langets and long, outlined cap; wooden, leather-covered grip with brass wire binding (restores). Wooden, leather-covered scabbard, brass mounts with two lugs. length 95.5 cm.
dating: first quarter of the 19th Century provenance: France, Curved, single-and false-edged blade, with deep fuller; brass hilt, langets decorated with drones and thunderbolts, three loop-guards and quillon with bas-relieved laurel oak leaves, long cap engraved with floral motifs; wooden grip with leather covering, featuring remains of brass wire binding. Iron scabbard with two suspension rings on brass bands, decorated with bas-relieved floral motifs. length 99 cm.
dating: First Empire provenance: France, Curved, single-and short false-edged blade with large, central fuller, first part engraved and gilded on a blue ground with trophies and floral motifs; silver, mono-quillon hilt, with langets, decorated with floral motifs in bass-relief. Wooden grip with silver wire binding (damages). Lather scabbard (damages) with silver mounts. length 87.5 cm.
dating: 1799 provenance: London, Wide, curved, single-and false-edged blade with large, central fuller, first part engraved with a soldier on horse and trophies on a blue ground, royal, crowned monogram 'GR' and floral motifs; fine, iron, mono-quillon hilt, finely decorated and chiselled with beaded bands and grooves, partially engraved with floral motifs, langets with a trophy. Wooden, leather-covered grip with iron wire binding. Wooden, leather-covered scabbard with iron mounts, pierced and engraved with trophies and floral motifs, cap with oval, bronze medallion, with inscription 'Presented to Major Patterson by the Officers, Non Comm. Officers & Privates of his Troops Light Dragoons 1799'. Manufacturer 'Knubley & Co. No. 7 Charing Cross London' on the opposite side. Two suspension rings. length 96 cm.
dating: Mid 19th Century provenance: Italy, Strong, curved, single-and false-edged blade, with central fuller and ribbed tip, tang marked 'BLECKMANN SOLINGEN'; Iron hilt with big, drop-shaped opening and smooth, long cap. Leather-covered grip with metallic wire binding. Iron scabbard with two suspension rings. length 103.5 cm.
dating: Late 19th Century provenance: Kingdom of Italy, Curved, single-and short false-edged blade, tip, with fuller, marked at the tang 'SOLINGEN', 'BUTTSCH SOHN', and with stamps among which 'F.C.'. Iron, mono-quillon hilt with thin, rounded langets. Parry-quillon with a hole for a sword-knot. Some slight pitting. Grip with remains of leather covering and brass wire binding. Long, smooth cap. No scabbard. length 97,3 cm.
dating: Late 19th Century provenance: Kingdom of Italy, Curved, single-and false-edged blade with central fuller that doubles toward the foible. Finely engraved base, Savoy coat-of-arms in the center, among floral motifs and trophies. Iron hilt with guard with four bands, checkered cap and wooden grip. Iron scabbard with one suspension ring. length 89 cm.
dating: Third quarter of the 19th Century provenance: Kingdom of Italy, Strong, curved, single-and false-edged blade, with central fuller and tip ribbed in the center, tang with stamps. Iron hilt with drop-shaped opening and short, smooth cap. Wooden, leather-covered grip with metallic wire binding. Iron scabbard with two suspension rings. length 105 cm.
dating: Second half of the 19th Century provenance: Kingdom of Italy, Strong, curved, single-and false-edged blade, with large, central fuller and tang; iron, mono-quillon hilt with langets and opening for sword-knot, smooth, long cap. Wooden, leather-covered grip with metallic wire binding. Iron scabbard with one suspension ring. Scarce. length 96.5 cm.
dating: Second quarter of the 19th Century provenance: Kingdom of the Two Sicilies, Straight, single-and false-edged blade with double groove, tang with Naples Royal Manufacture mark; bronze Garde de Battaglie hilt with big, pierced shell-guard, scabbard cover decorated with vineyards, loop-guard ending in a curl, five crossbars, smooth cap. Wooden, spiral grip without wire binding. Iron scabbard with two, brass bands, decorated en suite. Two suspension rings. length 107 cm.
dating: First half of the 19th Century provenance: Naples, Curved, single-and false-edged blade with large, central fuller, the base with Kabbala number '1414', trophies and floral motifs. Oriental hilt with brass mounts, decorated and engraved with floral motifs, ivory grip scales, with brass rivets and chain. Gilded, brass scabbard, engraved with floral motifs, two suspension rings, with thick rope in golden thread. Scarce. length 89 cm.
dating: early 20th Century provenance: Prussia, Straight, single-edged blade, tip, double fuller, marked 'ROBERT HERMES SOLINGEN' at the tang. Brass hilt with eagle and monogram of William II. Ring-nut with crowned stamp. Grip covered with fish skin, with metallic wire binding and Kaiser monogram. Iron scabbard with one lug, marked 'K.F.R.6.3' (matching marking on the back of the guard). length 101 cm.
dating: late 18th Century provenance: Prussia, Curved, single-and false-edged blade with central fuller and rear groove, the base with remains of signature 'Potsdam'; iron hilt with langets, long cap and leather-covered grip without wire binding. Wooden, leather-covered, restored scabbard with white metal mounts. The cap marked 'IL 13:398'. length 98 cm.
dating: First Empire provenance: Cisalpine Republic, Curved, single-and short false-edged blade with large central fuller, first part engraved and gilded (parts missing) with a hussar, trophy, sun and floral motifs on a blue ground. Brass hilt with remains of gilding, loop-guard angled at the base and with a curl on the ends, pommel shaped as eagle's head, horn, spiral grip. Leather scabbard (damages) with brass mounts. Two suspension rings. length 87 cm.
dating: 1840 circa provenance: Hungary, Wide, curved, single-and false-edged blade with large fuller and short tang, base with a deep, crescent mark. Iron, mono-quillon hilt with round langets, smooth, long cap with ring-nut and leather-covered grip without wire binding. Iron scabbard with two suspension rings. length 99 cm.
dating: 19th Century provenance: Russian Empire, Large and strong, slightly curved, single-and short false-edged blade with saw-back and central fuller; tang with remains of stamps. Solid brass quillon and grip, with stamps in Cyrillic and '1831', Wooden scabbard with leather-covering, brass chape and cap. With belt hook. length 67 cm.
dating: first quarter of the 20th Century provenance: Austria, Straight, single-and false-edged blade, base marked with 'MA'; wooden grip graven with '49' and date '01.9.37' (? barely readable), 'DUCE' and skull, copper medallion at the center with San Marco's lion on a flag under the crown. Iron scabbard with leather clutch. length 33.5 cm.
-
89918 item(s)/page