There are 400965 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribeAn 18ct gold carved head-style five stone diamond ring, a graduated row of brilliant cut diamonds, with an estimated total weight of approximately 1.00ct, claw set to the carved-style head, with tapered shoulders and a 'D' section shank. London 1980, 4.47g.Finger size MCondition report: Surface marks/scratches to mount.
A gold sapphire and diamond three stone ring, an oval mixed cut sapphire with a brilliant cut diamond at each side, all claw set to open tapered shoulders and a 'D' section shank. Tested as approximately 14ct gold, 3.04g.Finger size MCondition report: A surface reaching inclusion to the sapphire, and a couple of nibbles to the girdle.A surface reaching inclusion to one of the diamonds.Gemstones slightly dirty, would benefit from being cleaned.Surface marks/scratches to mount.Slight wear to the claws.
An 18ct white gold single stone diamond pendant, a brilliant cut diamond, with an estimated weight of approximately 0.38ct, bezel set to a plain collet with concealed suspension, Edinburgh 2004. Suspended on an 18ct white gold filed curb chain with bolt ring clasp, Sheffield. Chain 405mm long, 2.46gCondition report: Diamond measures approximately 4.70 x 2.97mm.No obvious signs of wear to chain.Minor surface marks to pendant mount.
A white gold single stone diamond ring, a transitional cut diamond, with an estimated weight of approximately 1.45ct, claw set to a pierced foliate collet. With tapered chenier shoulders and a plain shank. Tested as approximately 18ct gold, 1.92g. Diamond assessed as approximately:Colour: Q/RClarity: I1/I2Finger size LCondition report: Diamond measures approximately 7.75 - 7.80 x 3.94mm.Surface marks/scratches to mount.Shank slightly thinner at base.Underbezel of collet out of shape.Wear to one of the claws.Some surface reaching inclusions to the diamond.
A platinum single stone diamond ring by Tiffany & Co., a brilliant cut diamond, with a stated weight of 0.73ct, six claw set to chevron section shoulders and a slightly tapered shank. Marked PT950, TIFFANY & CO, 27531636, 0.73ct. 6.09g. With box and outer case.Finger size PAccompanied by a Tiffany & Co. Diamond Certificate, no. 27531636/L11230513, with a stated diamond weight of 0.73ct, colour G, clarity VS1.Condition report: Very minor surface marks/scratches to mount.Two solder joins visible under 10x magnification on inside base of shank, where ring has previously been sized. Slight scuffs to the edges of the outer case. Underneath of diamond very slightly dirty, would benefit from being cleaned.
An Edwardian 18ct gold opal and diamond seven stone ring, a graduated row of round cabochon opals, claw set, with pairs of old eight cut diamonds grain set between, to a scalloped gallery, slightly tapered shoulders and a 'D' section shank. Chester 1905. Head 16.5 x 6.0mm, 3.96g.Finger size Q approximatelyCondition report: Shank oval.Two solder joins visible near base of shank, where ring has been sized and an additional piece of gold added.Abrasions to the opals.Wear to the claws.Surface marks/scratches to mount.
An 18ct white gold aquamarine and diamond three stone ring, an emerald cut aquamarine, with a stated weight of 0.40ct, with a triangular brilliant cut diamond at each side, with a stated total weight of 0.18ct. All claw set to tapered shoulders and a plain shank. London 2005, 2.81g.Finger size NCondition report: A chip to the pavilion of the aquamarine, and nibbles to the crown facet junctions.
An 18ct gold single stone princess cut diamond ring, a princess cut diamond, with an estimated weight of approximately 0.95ct, four claw set in white gold, to yellow gold shoulders claw set with a trefoil of brilliant cut diamonds, and a tapered 'D' section shank. Birmingham 1994, 4.42g. Princess cut diamond assessed as approximately:Colour: G/HClarity: SI1/SI2Finger size O¼Condition report: Princess cut diamond measures approximately 5.48 x 5.36 x 3.92mm.Minor surface marks/scratches to mount.
A white gold single stone diamond pendant, a brilliant cut diamond, with an estimated weight of approximately 0.20ct, rub set to the triangular pendant, with fixed bale, tested as approximately 18ct gold. Suspended on a 9ct gold curb link chain with bolt ring clasp, Birmingham 2012. Pendant 16 x 10mm, chain 475mm long, 2.78gCondition report: Chain worn. Surface marks to mounting.
An 18ct gold single stone diamond ring, a brilliant cut diamond, with an estimated weight of approximately 0.98ct, claw set to a white scroll collet. With yellow gold tapered chenier shoulders and a plain shank. Import hallmark London 1990, 2.48g. Diamond assessed as approximately:Colour: H/IClarity: SI1/SI2Finger size MCondition report: Diamond measures approximately 6.50 - 6.43 x 3.71mm.Some wear to the claws and slight wear to the sides of the underbezel.Surface marks/scratches to mount.Shank slightly thinner at base.
A white gold single stone emerald pendant, an oval mixed cut emerald, 7.01 x 4.98 x 3.83mm, four claw set to an articulated bale. Suspended on a curb link chain with bolt ring clasp. Marked 9K. Chain 460mm long, 1.00gCondition report: Surface reaching inclusions to the emerald.No signs of wear to the chain.
An 18ct gold emerald and diamond three stone ring, a baguette cut emerald, with a stated weight of 0.22ct, with a triangular brilliant cut diamond at each side, with a stated total weight of 0.15ct, all flush set, to a tapered chevron section shank. London 1998, 3.75g.Finger size NCondition report: Some surface reaching inclusions to the emerald.Minor surface marks to mount.
A black opal and diamond ring, a circular cabochon black opal, 7.32-7.25 x 2.90mm, four claw set, with old eight cut diamonds grain set to the shoulders, and a grooved shank. Tested as approximately platinum. 2.46g.Finger size OCondition report: Opal is a solid opal, not a doublet, with the play-of-colour largely confined to the top surface/table. Opal slightly loose in setting. Underneath of opal and diamonds a little dirty, would benefit from being cleaned.Underbezel split from shank on one side. Some wear to claws, one claw slightly away from stone.Some minor scratches/abrasions to the crown of the opal, visible under 10x magnification, not easily visible with the naked eye.Surface marks/scratches to mount.Solder joins visible on either side of shank where half shank has been replaced.
A pair of Edwardian gold peridot drop earrings, a circular mixed cut peridot claw set to a rex collet, with a pear cut peridot claw set to an articulated collet below, with hook fittings, tested as approximately 9ct gold, 35mm long, together with a 9ct gold five stone peridot ring, Birmingham 2007. 4.52g total.Finger size M (3)Condition report: Minor surface marks/scratches to mounting of all.Earring hook fittings slightly out of shape.Some nibbles to the facet junctions of the peridots to the earrings.
An 18ct gold five stone diamond ring,a row of brilliant cut diamonds, with an estimated total weight of approximately 0.70ct, bar set in white gold, to a yellow gold flat profile shank, Birmingham, 3.34g.Finger size L½Condition report: Shank very slightly oval.Surface marks/scratches to mount.Slight wear to settings.
A gold single stone pink topaz ring, an oval mixed cut pink topaz, approximately 16.0 x 10.5 x 5.4mm, rub set to a plain collet, with tapered shoulders and a 'D' section shank. Tested as approximately 9ct gold, 4.36g.Finger size LCondition report: Surface marks/scratches to mount.Solder joins visible between head, shoulders and shank. Possibly later replacements.
A 14ct rose gold single stone black diamond ring, a brilliant cut black diamond, with an estimated weight of approximately 1.70ct, claw set to a scalloped gallery, concave shoulders and a plain shank. Birmingham 2000. 3.18g.Finger size SCondition report: Diamond measures approximately 7.15 - 7.13 x 5.43mm.Surface marks to mount.Shank slightly thinner at base.Culet of diamond chipped.
A gold single stone emerald ring, an emerald cut emerald, approximately 8.99 x 7.76 x 4.86mm, rub set to tapered shoulders and a flat section shank. Tested as approximately 18ct gold, 8.90g.Finger size T-U approximatelyCondition report: Surface marks/scratches to mount.Sizing join visible at base of shank.Some surface reaching inclusions to the emerald.Pavilion of emerald extends beyond the bottom of the collet, as such it is not possible to measure the finger size with total accuracy.
A gold single stone sapphire ring, a cushion cabochon sapphire, approximately 7.63 x 7.39 x 4.21mm, rub set to a wire frame, openwork twisted wire shoulders and a two row shank. Tested as approximately 14ct gold, 8.10g.Finger size T approximatelyCondition report: Shank very slightly oval.Surface marks/scratches to mount.Shank is constructed of two rows of round section wire. There is a plain section at the base, where the ring has been sized, where D section wire has been used and a line engraved on to the outside of the shank.Slight wear to the setting edge.Some abrasions to the sapphire.
A gold single stone sapphire ring, a torque-style head, rub set to one side with a circular mixed cut sapphire, with white gold wire guards, to a plain flat section shank. Tested as approximately 18ct gold. Head 11mm wide, 13.71g.Finger size U approximatelyCondition report: Ring slightly oval.Surface marks/scratches to mount.Slight abrasions to the crown of the sapphire.Two sizing joins visible at base of shank.Rhodium plating to the white gold guards wearing.
A gold single stone diamond ring, an old European cut diamond, with an estimated weight of approximately 1.75ct, rub set in white gold to an openwork frame, to yellow gold foliate shoulders and a plain shank, tested as approximately 14ct gold, Polish assay marks for 583 standard, 1931 to 1963, for Warsaw, 3.26g.Diamond assessed as approximately:Colour J/KClarity SI1/SI2Finger size MCondition report: Diamond measures approximately 7.30 - 7.40 x 4.93mm.Diamond slightly loose in setting when tapped, but still secure.Surface marks/scratches to mount.Shank slightly thinner at base.
A Victorian 18ct gold diamond and ruby five stone ring, with a graduated row of alternating old European cut and old eight cut diamonds, grain set to star collets, and cushion cut rubies, grain set to lozenge collets. The slightly tapered domed head to a tapered 'D' section shank. London 1888, 7.35g.Finger size VCondition report: Surface marks/scratches to mount.Shank slightly worn at base.Hallmark very clear.Some abrasions/nibbles to the crown facet junctions of the rubies.The diamonds measure approximately 3.20mm and 2.30mm x 2, estimated as approximately 0.20ct total.
A gold and platinum three stone diamond ring, a graduated row of old European cut diamonds all claw set in white, to tapered chenier shoulders and a yellow gold shank, tested as approximately platinum and 18ct gold, 2.04g.Finger size L½Condition report: Centre diamond measures approximately 4.90 x 3.15mm, estimated as approximately 0.50ct.Some wear to claws and underbezel.Claws show signs of having previously been retipped.Diamonds a little dirty, would benefit from being cleaned.Gold shank is a later replacement.Some abrasions to the crown facet junctions of the centre diamond.
A 9ct gold three stone diamond ring, a graduated row of old brilliant cut diamonds, claw set in white, to open tapered yellow gold shoulders and a plain shank, Sheffield 1996, 2.86g.Finger size R½Condition report: Surface marks/scratches to mount.Some surface reaching inclusions to the diamonds.
A gold single stone diamond ring, a transitional cut diamond, with an estimated weight of approximately 0.45ct, claw set in white to a yellow gold underbezel, with old brilliant cut diamonds grain set to the shoulders, and a plain shank, tested as approximately 18ct gold, 1.69g.Finger size PCondition report: Diamond measures approximately 4.93 - 5.00 x 2.92mm.Some nibbles to the girdle edge of the diamond. Diamonds a little dirty, would benefit from being cleaned.Surface reaching inclusions to some of the shoulder diamonds.Shank worn, thinner at base.Surface marks/scratches to gold.
An 18ct white gold single stone diamond ring, a brilliant cut diamond with an estimated weight of approximately 0.54ct, claw set to solid tapering shoulders and a court section shank, Birmingham, 3.25g.Finger size ICondition report: Diamond measures approximately 5.29mm in diameter (cannot measure depth due to mount limitations).Surface marks/scratches to mount.
An 18ct white gold single stone diamond ring, a brilliant cut diamond with an estimated weight of approximately 0.60ct, claw set to a rex collet, with tapered chenier shoulders and a D section shank, Birmingham 1992, 2.81g.Finger size L½Condition report: Diamond measures approximately 5.48 x 3.22mm.Diamond at a slight angle in setting; table not completely parallel with top of collet.Minor surface marks/scratches to mount.One claw missing.Sizing join just visible at base of shank.
An 18ct gold single stone diamond ring, a brilliant cut diamond four claw set in white, to solid tapered yellow gold shoulders and a plain shank, shank marked 0.33, believed to be the known carat weight, London 2003, 3.59g.Finger size O½Condition report: Surface reaching inclusions to the diamond.Claw worn and some wear to the side of the collet.Diamond a little loose in setting, but still appears secure.Surface marks/scratches to mount.Shank slightly thinner at base.
An 18ct gold three stone emerald and diamond ring, a circular mixed cut emerald with a brilliant cut diamond at each side, all claw set in white gold to yellow gold crossover shoulders and a plain shank, 4.65g.Finger size LCondition report: Surface marks/scratches to mount.Shank slightly oval.Surface reaching inclusions to the emerald.Claws all proud.Gemstones slightly dirty, would benefit from being cleaned.Solder join visible to base of shank where the ring has been sized.Some solder has bled into the hallmark, obstructing the assay office mark.
A 9ct gold two stone cultured pearl crossover ring, two cultured pearls, possibly freshwater, 8.3 to 8.5mm in size, cup set to crossover shoulders and a plain shank, London 1967, 4.06g.Finger size M½Condition report: Surface marks/scratches to mount.Pearls a little dirty, would benefit from being cleaned.Shank slightly thinner at base.
A quantity of jewellery, to include a gold single stone cultured pearl ring, marked 9ct, a pair of gold imitation pearl earrings, with screw fittings, marked 9ct Ciro England, a pair of three colour gold drop earrings, marked 9k, and a gold single stone amethyst pendant, tested as approximately 9ct gold, 6.89g total (6)
A 9ct gold single stone citrine ring, an oval mixed cut citrine, claw set to pierced lozenge gallery, with trifurcated shoulders and a plain shank, London 1974, citrine 23.1 x 17.0 x 11.4mm, 9.83g.Finger size K-L (approximately)Condition report: The pavilion of the citrine extends below the bottom of the collet. As such, the ring does not sit on a wheatsheaf stick and so accurate measurement of the finger size is not possible. The ring has been estimated as approximately K-L in size.Some nibbles to the girdle edge and keel line of the citrine.Very minor abrasions to crown facet junctions, visible under 10x magnification, not visible with the naked eye.Shank slightly thinner at base.Surface marks to mount.Stone not sitting properly in claws on one side, but still secure in setting.
A gold single stone smoky quartz ring, a pale brown square step cut smoky quartz, 12.8mm diameter, four claw set to a pierced gallery, open shoulders, and a plain flat section shank, marked 9ct, 5.96g.Finger size L½Condition report: Surface marks/scratches/tarnish to mount.Minor abrasions/scratches to smoky quartz.
Four 9ct gold rings, to include an amethyst and split pearl cluster ring, wear to the split pearls, Birmingham 1968, a single stone cabochon garnet ring, London 1981, a sapphire and diamond ring, import hallmark London 1996, and a sapphire and diamond cluster ring, Birmingham, 10.59g total (4)Finger size P, V½, Q, O
Three 9ct gold rings, to include a three stone amethyst ring, Birmingham, a pierced scroll design ring grain set with eight cut diamonds, import hallmark London, and a slightly tapered domed head ring with eight cut diamonds grain set to heart shaped collets, import hallmark London, 8.55g total (3)Finger size R½, P, Q¾
A gold single stone opal pendant, tested as approximately 9ct gold, 13.7 x 8.2mm (excluding jump ring), suspended on a 9ct gold chain, worn, together with a 9ct gold single stone opal ring, 3.54g total (2)Finger size K½Condition report: Chain very worn.Opal to ring abraded, and some claws missing.Surface marks/scratches to mount.
A gold three stone turquoise ring, three turquoise cabochons, rub set to crossover shoulders and a flat section shank, tested as approximately 9ct gold, Polish assay marks, together with a gold shell cameo pendant, tested as approximately 9ct gold, 3.95g total (2)Finger size OCondition report: Image of ring and pendant not to scale with each other.
A 9ct gold moonstone and turquoise ring, an oval cabochon moonstone with quatrefoil surround of round cabochon turquoise, all rub set to plain collets to the openwork scroll head, with plain D section shank, London 1976, head 19 x 20mm, 5.27g, together with a gold single stone cubic zirconia ring, tested as approximately 9ct gold, ignore markings, 3.93g, and a metal peridot, garnet, amethyst and paste set pendant (3)
A quantity of jewellery, to include an 18ct gold sapphire and diamond cluster ring, Birmingham, an 18ct gold diamond cluster ring, Birmingham, a gold single stone diamond ring with fan motif shoulders, tested as approximately 18ct gold, and a ten row cultured freshwater pearl bracelet (4)18ct gold - 7.24g total
A quantity of jewellery, to include a white gold synthetic spinel full eternity ring, marked 9ct, a gold hoop earring, damaged, marked 375, a gold three stone paste ring, marked 9ct, a Victorian silver brooch with metal fittings, damaged, a circular metal brooch, nine silver cubic zirconia set rings, and two metal rings (16)9ct gold - 4.31g total, silver - 56.26g total
An 18ct white gold ruby and diamond three stone ring, an oval mixed cut ruby, with a stated weight of 0.70ct, claw set to a plain collet. An oval brilliant cut diamond at each side, claw set, to a gallery grain set with brilliant cut diamonds. Parallel shoulders, milligrain set with baguette cut diamonds, with guards grain set with brilliant cut diamonds, to a plain shank. A stated total diamond weight of 0.44ct. London 2006, 2.78g.Finger size ICondition report: Minor nibbles to crown facet junctions of ruby.
A white gold single stone diamond ring, an old mine cut diamond, with an estimated weight of approximately 0.45ct, grain set to a box collet, with chenier shoulders, grain set with old eight cut diamonds, and a plain shank. Tested as approximately 18ct gold, 2.48g.Finger size JCondition report: Shank worn at base.Surface marks/scratches to mount.Surface reaching inclusions to one of the eight cut diamonds.
An 18ct gold single stone diamond pendant, an old European cut diamond, with an estimated weight of approximately 0.61ct, claw set to a rex collet, with split bale, suspended from a filed trace link chain with bolt ring clasp. Import hallmark Birmingham 1995. Chain 515mm long, 5.14gCondition report: Diamond measures approximately 5.24 - 5.20 x 3.51mm.
A gold single stone diamond ring, a brilliant cut diamond, with an estimated weight of approximately 0.35ct, grain set to a white pierced box collet, to tapered chenier shoulders with milled decoration, and a yellow 'D' section shank. Tested as approximately 18ct gold, 3.66g.Finger size MCondition report: Diamond measures approximately 4.60 x 2.73mm.Shank slightly thinner at base.Minor surface marks to mount.
A gold single stone diamond ring, an old brilliant cut diamond, with an estimated weight of approximately 0.42ct, claw set to a rex collet, applied to a light court section band. Marked 18ct. Band 4mm wide, 4.15g.Finger size PCondition report: Diamond measures approximately 5.13 x 4.74 x 2.70mm.Diamond assessed as approximately:Colour I/JClarity SI1/SI2Surface marks/scratches to mount.Shank slightly thinner at base.All claws worn, one claw missing.
A white gold heart cut diamond halo cluster ring, a heart cut diamond, with a stated weight of 0.43ct, claw set and surrounded by a halo of micro set brilliant cut diamonds to the top and sides of the frame, to two rows of brilliant cut diamonds micro set to the shoulders, with a plain shank. Tested as approximately 18ct gold. Head 20.0 x 8.1mm, 2.80g.Finger size K½Condition report: Claws to principle stone nice and deep.All stones secure.Surface reaching inclusions to the principle diamond.Minor surface marks to mount.
From a private Singaporean collection Long silver pearl necklace with oval blue stone and Swarovski Crystal, large central blue stone and Swarovski Crystal encrusted cuff and an adjustable matching ring Roberto Cavalli Condition: In excellent condition Additional Information: Sold to benefit charitable causes
From a private Singaporean collection A brooch consisting of a black crystal cross, a lilac stone cross with CC charm and a larger multi coloured stone cross, and a separate diamanté encrusted piece with central CC Chanel Condition: With 3 stones missing two of which are present Additional Information: Sold to benefit charitable causes
Loading...
