There are 400965 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribeTHREE GEM SET RINGS, comprising a cabochon ruby single stone ring, 18ct gold mounted, a diamond set dress ring, 18ct gold mounted, and a cabochon turquoise single stone ring, stamped '750', first ring size R½ (3) Approx. gross weights only: diamond set ring 8.8gm, ruby ring 5.5gm, turquoise ring 10.2gm
A SAPPHIRE AND DIAMOND THREE STONE RING, the oval mixed-cut sapphire claw set between two old-cut diamonds, two colour precious metal mounted, stamped '18ct Plat', total diamond weight approximately 0.25ct, ring size M Condition report: The sapphire has a mid to dark purplish-blue hue with whiteish colour zoning and has multiple chips, scuffs and nicks to the surface. Diamonds have a fairly lively appearance but both stones have chips and fractures, with estimated P2 to P3 clarity and J to L colour, assessed mounted. The ring mount has considerable wear and the sides of the settings have worn flat. Metal standard is untested. Gross weight approx. 2.2gm.
A DIAMOND SINGLE STONE PENDANT, the round brilliant-cut diamond in square four claw setting, white precious metal mounted, stamped '750', on an unassociated white metal chain stamped '925', diamond weight approximately 0.70ct, pendant length 1.25cm Condition report: The diamond is bright and lively but contains small fracture and mineral inclusions, some that are surface-reaching, and has a light yellowish tint, with estimated P1 clarity and K to L colour, assessed mounted. The pendant mount is modern with light surface wear. Pendant weight approx. 1gm.
A DIAMOND HALF HOOP RING, the line of uniform round brilliant-cut diamonds in channel setting, 18ct gold mounted, together with an emerald and diamond three stone ring, also 18ct gold mounted, first ring total diamond weight approximately 0.30ct, size approximately S (2) Condition report - Half hoop ring: Diamonds are mostly well matched, bright and lively to the naked eye, estimated SI1 to P1 clarity and H to J colour, assessed mounted. The ring mount has a split to the back of the shank, general surface wear throughout, and has been enlarged in size. The setting requires a comprehensive clean. Gross weight approx. 3.3gm. Emerald ring: The emerald is heavily included with dark mineral, fracture and fissure inclusions. Some of the fractures are surface-reaching, and the emerald has chips and scuffs to the surface. Diamonds are well matched and fairly bright. The ring mount has a split to the back of the shank, general surface wear throughout, and has been possibly been re-sized. Gross weight approx. 2.3gm.
A DIAMOND SINGLE STONE RING, the old-cut diamond in millegrain collet setting, 18ct two colour gold mounted, diamond weight approximately 0.70ct, ring size O Condition report: The diamond has a sizeable chip to the side crown facets and contains central surface-reaching fractures, with estimated P2 clarity and J to K colour, assessed mounted. The mount has general surface wear, with a small dark solder join/repair to the side of the setting, some thinning to the edges of the setting, and a small split to the back of the shank. Gross weight approx. 2.5gm.
A DIAMOND SINGLE STONE RING, the round brilliant-cut diamond in raised double claw setting, white precious metal mounted, stamped '18ct', together with an 18ct white gold panelled wedding band, and two white stone full hoop eternity rings, first ring size P (4) Approx. gross weights only: single stone ring 2.5gm, wedding band 4.3gm, full hoop rings combined 5.5gm
AN ENAMEL AND HARDSTONE INTAGLIO RING, the 19th century fluted setting decorated with scalloped red, white and black enamel, enclosing a possibly earlier oval cornelian intaglio carved to depict an animal, (intaglio chipped), in closed-back setting, between tapered foliate engraved shoulders, ring size approximately O - P Condition report: The intaglio has a large chip to one side, which penetrates in to the stone and encroaches on the incised decoration. The intaglio has scuffs, scratches, pitting and nicks, measuring approx. 12mm length x 10.8mm width. The edges of the setting have worn thin and have fine splits and chips. Enamel decoration is heavily worn, with losses, chips and scratches to the enamel. The mount has considerable wear, with deep scuffs and chips, patchy wear to the engraved decoration and some deep filing marks to the interior. An indistinct mark is scratched to the inside of one shoulder, possibly ‘XXXV’. Metal standard is untested. Gross weight approx. 5.3gm.
AN OPAL FIVE STONE RING, the oval and circular cabochon opals spaced by rose-cut diamonds points, above a scrolled gallery, yellow precious metal mounted, ring size approximately P Condition report: The opals are scuffed, scratched, chipped and crazed. Diamonds have a greyish, fractured appearance and one stone is missing. The setting has a build up of grease and dirt and requires professional cleaning. The setting has general wear, scuffs and scratches, with thinning to the edges of the setting. The shank may have been enlarged. Metal standard is untested. Gross weight approx. 4.4gm.
A PINK TOURMALINE AND DIAMOND PANEL RING, the rectangular pierced and millegrain panel centred with a circular mixed-cut pink tourmaline, bordered by graduated old brilliant, Swiss and single-cut diamonds, above a pierced gallery, white precious metal mounted, stamped 'Platinum', total diamond weight approximately 0.35ct, ring size N Condition report: The tourmaline measures approximately 4.8mm in diameter and has surface scuffs, chips and scratches. Diamonds are well matched, bright and lively, but one of the brilliant cuts has a large chip that penetrates through to the pavilion of the stone. This stone may need replacing. Remaining diamonds have estimated VS2 to P1 clarity and H to K colour, assessed mounted. There is a split to the base of one shoulder, patchy wear to the edges of the setting and solder joins to the shank. Length of panel approx. 1.5cm. Date of manufacture unknown, metal standard untested. Gross weight approximately 4.3gm.
A DIAMOND SET SERPENT BRACELET, modelled as a coiled snake, his head pavé set with rose-cut diamonds and circular-cut red stone eyes, two colour precious metal mounted, stamped 'PAT 18ct', inner diameter approximately 6cm Condition report: Surface wear, scuffs, nicks and scratches to the mount. Diamonds have greyish-white hues, most with chips and fractures. The red stone eyes also have small chips and fractures. Metal standard is untested. Gross weight approx. 24.5gm.
A COLLECTION OF DRESS RINGS, comprising a ruby and diamond half hoop ring, stamped '750', a blue synthetic spinel single stone ring, with openwork abstract mount, stamped '9ct', and two garnet cluster rings, first ring size I½ (4) Condition report: Approx. gross weights only: half hoop ring 6.5gm, synthetic spinel ring 13.8gm, 9ct gold garnet cluster ring 7.2gm, other cluster ring 6.2gm
A DIAMOND SINGLE STONE PENDANT, the heart-shaped brilliant-cut diamond in four claw setting, surmounted by a heart-shaped bale, white precious metal mounted, stamped '750', on a fine curb-link chain stamped '14k', diamond weight approximately 1.60ct, pendant length 1.55cm Condition report: The diamond has pale surface-reaching fractures and chips/naturals to the faceted girdle, with estimated SI2 to P1 clarity and J to K colour, assessed mounted. The pendant mount has a scuff across the heart-shaped panel and a solder join/repair to the back. The chain has surface wear, an extension section and the clasp is loose fitting. Metal standard is untested. Gross weight approx. 4.5gm.
A COLLECTION OF JEWELLERY, comprising a half pearl set pendant, the openwork lozenge-shaped panel centred with a green garnet-topped doublet, suspending a cabochon opal drop, stamped '9ct', a diamond half hoop ring, 14ct white gold mounted, a cabochon single stone ring, 14ct gold mounted, a three stone ring, with scrolled setting, 9ct gold mounted, and a further three stone ring, pendant length 4.6cm (5) Approx. gross weights only: pendant 2gm, diamond half hoop ring 2.6gm, cabochon ring 6.6gm, 9ct gold three stone ring 3.8gm, white metal three stone ring 4.3gm
A LATE 19TH CENTURY/EARLY 20TH CENTURY PEARL AND DIAMOND FRINGE NECKLACE, designed as a line of graduated openwork panels of scrolled and foliate design, each centred with a single pearl bordered by old and single-cut diamonds, spaced by smaller single-cut diamond set foliate batons, on a trace-link back chain, gold and silver mounted, (pearls untested for origin), total diamond weight approximately 0.80ct, length 36.5cm Condition report: Diamonds have variable colour and clarity but are fairly bright and lively, some stones with small chips and fractures. Estimated VS2 to P2 clarity and H to L colour, assessed mounted. Pearls have slightly variable creamy and greyish-white hues, all with surface wear, nicks and scuffs. No obvious stone replacements. The necklace mounts have general surface wear, scuffs and chips, with patchy tarnishing and solder joins/repairs at junctions within the panels and links. The clasp is functioning. Scrolled panels measure approx. 2.75cm x 1.6cm, 2.1cm x 1.45cm and 1.85cm x 1.2cm. Width of panels and batons combined 12.7cm. Metal standard is untested. Gross weight approx. 14gm. No case.
A CITRINE SINGLE STONE BROOCH, the oval mixed-cut citrine in four claw setting, to a concave oval mount stamped '9ct', length 3.8cm Condition report: Light surface wear, nicks and scuffs to mount and citrine. Straight colour zoning to citrine under magnification. Citrine measures approx. 2.45cm in length. The pin clasp is functioning. Gross weight approx. 13.5gm.
A DIAMOND CIRCLET BROOCH, designed as a row of cushion-shaped old-cut diamonds in pinched collet settings, spaced by similarly set lasque-cut diamonds, two colour precious metal mounted, in Carrington & Co Ltd retailer's case, total weight of old-cut diamonds approximately 0.80ct, diameter 2.6cm Condition report: Old-cut diamonds are well matched, bright and lively, some stones with surface-reaching fractures and chips, with estimated H to K colour and SI1 to P3 clarity (due to chips), assessed mounted. Lasque-cut diamonds have variable colour and clarity, some greyish in appearance, some fractured or chipped, one stone possibly replaced. The mount has general wear and patchy tarnishing, with scuffs, nicks and chips. The pin is functioning but the safety catch may be later replaced. Metal standard is untested but possibly a gold/silver combination. Gross weight approx. 4.5gm.
AN EMERALD AND DIAMOND THREE STONE RING, the square step-cut emerald claw set between two old brilliant-cut diamonds, two colour precious metal mounted, with scroll pierced gallery, total diamond weight approximately 0.50ct, ring size P Condition report: The emerald has a large chip to one corner and a further chip to another corner. There are smaller chips/nicks to facet edges, surface-reaching fractures and scuffs/scratches to the surface of the stone. The emerald contains natural inclusions that are just visible to the unaided eye but has general good transparency and a mid-green hue, measuring approx. 4.7mm length x 4.5mm width x 3.2mm depth. Diamonds are well matched, bright and lively, but both stones have nicks, chips and naturals to the girdles and surface-reaching fractures. Both diamonds have an off-round outline, each measures approx. 4.4mm in diameter. Estimated P1 to P2 clarity and H to J colour, assessed mounted. The ring mount is heavily worn. Some of the claws have been repaired and others may require re-tipping. The back of the shank is worn thin and has been re-sized. Metal standard is untested. Gross weight approx. 1.8gm.
A 15CT GOLD POWDER COMPACT, of square form, with banded and engine turned decoration, and having diamond set thumbpiece (one stone lacking) by Frederick Thomas Buckthorpe, London 1921, 9cm wide, 210g Condition report: good overall condition. The clasp is missing one stone. Minor surface scratches. On the inside the mirror is loose, and the frame which holds it in place a bit bent/misshapen.
A COLLECTION OF JEWELLERY, comprising a 9ct three colour gold fancy-link bracelet, suspending a gem set charm, a purple paste pendant, suspended from a fine box-link chain stamped '14k', a cultured pearl graduated single strand necklace, a pair of cultured pearl knot ear studs, and further items, bracelet length 20cm (qty) Condition report: Approx. gross weights only: 9ct bracelet 7.6gm, pendant on chain 3.5gm, white stone full hoop ring stamped ‘9ct’ 2.3gm, cultured pearl ring 1.3gm, collection of ear studs 8gm combined
A COLLECTION OF GEM SET BAR BROOCHES, comprising a diamond set bar brooch, designed as an openwork scroll of rose-cut diamonds, a diamond single stone bar brooch, applied with ropetwist wirework and bead decoration, stamped '15ct', a half pearl, synthetic ruby and diamond bar brooch, with French eagle's head mark to pin, and two further examples, (pearls untested for origin), first brooch length 3.8cm (5)
AN EMERALD AND DIAMOND HALF HOOP RING, the graduated oval mixed-cut emeralds spaced by pairs of single-cut diamonds, above a scrolled gallery, yellow precious metal mounted, stamped '18ct', ring size M Condition report: Emeralds are heavily included with minerals, fractures and fissures and some of the fractures are surface-reaching. The emeralds have numerous chips and scuffs and one of the outer stones has a fracture running across the width of the stone. Diamonds are also chipped and fractured. The mount has general surface wear, chips and scuffs throughout, patchy thinning to the edges of the setting and the shank has been re-sized. Metal standard is untested. Gross weight approx. 6.1gm.
A PAIR OF RUBY AND DIAMOND CLUSTER EAR STUDS, each designed as a flowerhead cluster, centred with a cushion-shaped ruby bordered by lasque-cut diamonds, on post fittings, diameter 0.95cm Condition report: Rubies are well matched, of mid pinkish-red hues, one stone with an area of iridescent ‘silk’ inclusions, both stones with surface wear and facet edge abrasion. Each measures approx. 3.5mm to 3.7mm in length/width. Diamonds have a greyish, fractured/chipped appearance. The mounts have surface wear, nicks and scuffs and patchy tarnishing. Metal standard is untested, but possibly gold and silver. The post fittings may be later replaced. Gross weight approx. 2.5gm.
A COLLECTION OF JEWELLERY, comprising a coral corallium rubrum cross pendant, applied with a foliate spray, on a 9ct gold trace-link chain, a stone set pendant, designed as a foliate cartouche, stamped '9ct', a garnet set pendant, 9ct gold mounted, a pair of ear pendants, a silver fancy-link necklace, a graduated bead necklace, and a paste cluster brooch, first pendant length 4.9cm (7)
A 9CT GOLD SERPENT BANGLE, of hinged crossover design, with circular-cut red stone eyes and engraved decoration, hallmarked for London 1960, inner diameter 6.2cm Condition report: The neck and tail of the serpent have flattened areas which appear to correspond to solder joins and areas of porosity, which are presumed to be part of the manufacture. The bangle has general surface wear, scratches, nicks and scuffs throughout and the hinge is functioning. Engraved decoration is fairly crisp. Approx. gross weight 20.4gm.
A COLLECTION OF JEWELLERY, to include a Royal Flying Corps wings brooch, on bar fitting stamped '9ct', a peridot and half pearl pendant on chain, a peridot and half pearl bar brooch, a cultured pearl bracelet, two silver cigarette cases, a white metal cigarette case, a white paste buckle, with French boar's head mark, and further items, (half pearls untested for origin), first brooch length 4cm Approx. gross weights only: RFC wings brooch 1.9gm, peridot pendant on chain 2.8gm, peridot bar brooch 3gm, two single stone rings 4gm
A DIAMOND FIVE STONE RING, the line of uniform round brilliant-cut diamonds in claw settings, 18ct two colour gold mounted, total diamond weight approximately 0.60ct, ring size P Condition report: Diamonds are well matched, bright and lively, but two stones have chips and surface-reaching fractures, estimated SI1 to P2 clarity and H to J colour, assessed mounted. The ring mount has general surface wear, nicks and scuffs throughout. Gross weight approx. 4gm.
A DIAMOND CLUSTER PANEL BROOCH/PENDANT, designed as a flowerhead cluster of graduated cushion-shaped old-cut diamonds in pinched collet and grain settings, spaced by rose and lasque-cut diamond points, with detachable brooch fitting, two colour precious metal mounted, largest diamond weight approximately 1ct, total diamond weight approximately 3ct, diameter 2.55cm Condition report: Diamonds are mostly well matched, fairly bright and lively, but the principal stone and some outer stones contain surface-reaching fractures and small chips, with estimated SI1 to P2 clarity and H to K colour, assessed mounted. The mount has surface wear and patchy tarnishing, the pin is functioning, but the safety catch may be later replaced. There is a small hole/pit to the side of the mount, near the pendant fitting. Metal standard is untested, but possibly a gold/silver combination. Gross weight approx. 8gm.
A COLLECTION OF VICTORIAN AND LATER JEWELLERY, comprising a Victorian gem set panel brooch, of openwork scrolled design, two half pearl set bar brooches, a cabochon moonstone star brooch, with later fittings, a blue zircon line bracelet, a blue zircon pendant necklace, a stone set dress ring, a micromosaic panel brooch, two coral corallium rubrum bead necklaces, a cultured pearl single strand necklace, and a further necklace, first brooch length 9cm (12) Approx. gross weights only: two bar brooches 6.5gm, gem set panel brooch 7.2gm, gem set ring 3.6gm.
A DIAMOND AND GEM SET PENDANT, of openwork geometric design, stamped '18k', on a ropetwist-link chain stamped '14k', a diamond set pendant on chain, stamped '750', and a white stone set pendant, stamped '10k', on a white metal chain, first pendant length 2.7cm (3) Approx. gross weights only: gem set geometric pendant on chain 6.7gm, diamond set pendant on chain 4.7gm
A COLLECTION OF JEWELLERY, comprising a cross pendant, stamped '15ct', on a fancy flattened-link chain stamped '750', a white stone dress ring, 9ct gold mounted, a cultured pearl dress ring, stamped '9k', a silver ingot pendant, a white stone full hoop ring, and further items, first pendant length 3.8cm Approx. gross weights only: cross 1.2gm, flattened-link chain 3.7gm, three stone ring 2.3gm, cultured pearl ring 1.5gm
A DIAMOND THREE STONE RING, the round brilliant-cut diamonds in claw settings, between bifurcated shoulders, 18ct gold mounted, hallmarked for London 1977, total diamond weight approximately 0.80ct, ring size M½ Condition report: Diamonds are well matched, bright and lively, but all contain small central mineral inclusions, with estimated P1 clarity and H to J colour, assessed mounted. The ring mount has general surface wear, scuffs, nicks and chips throughout. Gross weight approx. 5.8gm.
A COLLECTION OF JEWELLERY, comprising an oval shell cameo ring, 9ct gold mounted, an emerald and diamond half hoop ring, 9ct gold mounted, two 9ct gold wedding bands, a 9ct two colour gold twisted band ring, two white stone set rings, and a pair of ear hoops, first ring size O (8) Approx. gross weights only: cameo ring 5gm, emerald ring 2gm, 9ct wedding bands 7.5gm combined, single stone ring 2.1gm, full hoop ring 1.3gm, twisted band 2.6gm, ear hoops 3.5gm
AN AMETHYST AND DIAMOND LINE BANGLE, the oval hinged bangle claw set with a line of circular mixed-cut amethysts, spaced by five round brilliant-cut diamonds, white precious metal mounted, total diamond weight approximately 0.30ct, inner diameter 6cm Condition report: Amethysts are well matched, with an average diameter of 2.5mm, of mid-purple hues. One stone has a large chip, the others have light surface wear. Diamonds are well matched, bright and lively, with estimated VS1 to SI1 clarity and H to J colour, assessed mounted. The mount is modern with light surface wear and the hinge and clasp are functioning. Metal standard is untested. Gross weight approx. 13.8gm.
A COLLECTION OF ANTIQUE AND LATER JEWELLERY, comprising an amethyst single stone brooch, the oval mixed-cut amethyst in claw setting, stamped '15ct', an oval gilt metal locket pendant, with foliate scroll decoration and vacant cartouche, a shell cameo and half pearl bar brooch, stamped '9ct', and a further shell cameo brooch/pendant, first brooch length 3.15cm (4)
A DIAMOND FIVE STONE RING, the graduated cushion-shaped old-cut diamonds spaced by pairs of lasque-cut diamond points, to a scroll pierced gallery, yellow precious metal mounted, stamped '18ct', total diamond weight approximately 0.55ct, ring size M½ Condition report: Principal diamonds are well matched, bright and lively, with estimated SI1 to P1 clarity and H to J colour, some stones with surface-reaching fractures. The lasque-cut points have a greyish appearance. The mount has general wear, some scuffs and chips, thinning to the edges of the setting, and some claws have been re-tipped. The shank has a fine split and solder joins to the back. The setting requires a comprehensive clean. Metal standard is untested. Gross weight approx. 4.2gm.
A DIAMOND AND PEARL BROOCH, the openwork heart-shaped panel enclosing an urn and foliage, highlighted with half pearls and rose-cut diamonds, above a scroll pierced gallery, two colour precious metal mounted, together with a morganite single stone bar brooch, stamped '15ct', (pearls untested for origin), first brooch length 2.5cm (2)
A VARI GEM-SET BRACELET, adapted from a cocktail watch, the oval panel centred with a later added rectangular step-cut green synthetic spinel, bordered by millegrain channels of single-cut diamonds and square step-cut synthetic sapphires, with later added scrolled detail and segmented bracelet, together with a cultured pearl triple strand bracelet, the openwork scrolled clasp with circular-cut ruby accents, stamped '750', lengths 15.5cm and 20cm respectively (2) Condition report: First bracelet - this has been adapted from a cocktail watch and the central green stone, outer scrolled panels and segmented bracelet are later added. The back of the central panel has a hinged case where a watch movement would have fitted. This case back is heavily dented/damaged and is partly open. It appears to previously have been soldered shut to the panel. The bracelet has considerable wear throughout and areas of dark solder, with scuffs and chips to the mount, green stone and synthetic sapphires. Diamonds have variable colour and clarity, some stones with chips/surface-reaching fractures. Two diamonds are missing. Metal standard is untested and the segmented bracelet has a yellowish hue. Gross weight approx. 22.3gm. Second bracelet - Blemishes, creases, pitting and scuffs to cultured pearls, each measures approx. 6mm to 6.5mm in diameter. Scuffs, scratches and small chips to rubies, surface wear to clasp. Metal standard is untested. Gross weight approx. 35gm.
A SERPENT BRACELET, the head with cabochon garnet highlight, faceted red stone eyes and foliate engraved decoration, inscribed verso dated '15 April 1850', on a snake-link bracelet, later adapted with clasp fittings, together with a curb-link bracelet, spaced with mother of pearl panels, stamped '9ct', first bracelet length 20cm (excluding fittings) (2) Approx. gross weights only: serpent bracelet 16gm, mother of pearl bracelet 14gm
A DIAMOND SINGLE STONE RING, the round brilliant-cut diamond in eight claw setting, between stepped shoulders of baguette-cut diamonds, white precious metal mounted, principal diamond dimensions approximately 6.2mm diameter x 3.7mm depth, principal diamond weight approximately 0.90ct, ring size S Condition report: Diamonds are well matched and bright and lively, with estimated VS2 to SI1 clarity and H to J colour, assessed mounted. The mount has surface wear, patchy thinning to the edges of the stepped settings, and the shank has been enlarged. Width of setting approx. 1.55cm. Metal standard is untested. Gross weight approx. 2.9gm.
A DIAMOND SINGLE STONE RING, the cushion-shaped old-cut diamond in eight claw setting, two colour precious metal mounted, stamped '18ct', diamond weight approximately 1.40ct, ring size T Condition report: The diamond has a bright and lively appearance, with a faceted girdle, but is drawing a yellowish tint, with estimated VS2 to SI1 clarity and L to M colour, assessed mounted. The mount has light surface wear, scuffs and nicks. Metal standard is untested. Gross weight approx. 3.7gm.
A RUBY AND DIAMOND THREE STONE RING, the oval mixed-cut ruby claw set between two round brilliant-cut diamonds, two colour precious metal mounted, total diamond weight approximately 0.30ct, ring size I Condition report: The ruby has a deep purplish-red hue with fissures/fractures and needle-like inclusions visible under magnification, light surface wear and facet edge nicks/chips, with a larger chip to one end of the stone. The ruby measures approx. 6.2mm length x 4.7mm width 2.6mm depth. Diamonds are bright and lively, with estimated I to J colour and SI1 to SI3 clarity, assessed mounted. The mount has surface wear and patchy rubbing to the sides of the claw setting. Metal standard is untested. Gross weight approx. 2.5gm.
AN EDWARDIAN DIAMOND FIVE STONE RING, the scroll decorated hoop inset with a line of five graduated old-cut diamonds, 18ct gold mounted, hallmarked for Birmingham 1908, total diamond weight approximately 0.30ct, ring size Q Condition report: Diamonds are fairly lively, but most stones have surface-reaching fractures and chips, with estimated SI2 to P3 clarity and H to J colour, assessed mounted. The ring mount has general surface wear and areas of porosity. The back of the shank has possibly been re-sized. Gross weight approx. 4gm.
AN ART DECO SAPPHIRE AND DIAMOND PANEL RING, the elongated shaped rectangular panel of openwork geometric design, centred with a rectangular step-cut sapphire in millegrain collet setting, bordered by similarly set graduated old and brilliant-cut diamonds, on a possibly replaced 18ct white gold shank with bifurcated shoulders and London hallmark for 1929, total diamond weight approximately 1.40ct, ring size approximately M-NAddenda: Please note that the 18ct white gold shank may be replaced, and may not be original to the setting. The setting is untested as platinum/white gold.Condition report: The sapphire has a pale purplish-blue hue, with a central milky yellowish band/line of inclusions running across the width of the stone that is visible to the unaided eye, some faint possible ‘silk’ inclusions, and faint straight colour zoning. The sapphire has surface abrasion localised to facet edges and measures approx. 9.3mm length x 5.2mm width x 4.3mm depth. Diamonds have slightly variable colour and clarity, some stones with surface-reaching fractures and small nicks/chips, with estimated VS2 to P2 clarity and H to L colour, assessed mounted. Panel length approx. 3.1cm, weight of largest diamond approx. 0.15ct. The mount has surface wear throughout, small splits to the sides of the gallery (beneath the setting) and patchy thinning to the edges of the setting. Solder joins are visible to the underside of the setting. The shank is possibly replaced and has yellowish solder joins at the junctions to the panel. Hallmarks to the shank are clearly struck. Gross weight approx. 8.4gm.
A COLLECTION OF JEWELLERY, comprising two single stone dress rings, 9ct gold mounted, three further stone set rings, and an amethyst set brooch, brooch length 3.75cm (6) Approx. gross weights only: green stone ring 3.4gm, 9ct gold mounted single stone rings 6.1gm, cluster ring 9.4gm, white stone ring (with four claw setting) 2.3gm, brooch 1.4gm
A SAPPHIRE AND DIAMOND THREE STONE RING, the oval mixed-cut sapphire claw set between two round brilliant-cut diamonds, 18ct two colour gold mounted, total diamond weight approximately 0.15ct, ring size M½ Condition report: Sapphire of dark inky-blue hue with faint colour zoning, light surface wear and scuffs. Diamonds are fairly bright and lively, but one stone is chipped to the girdle and has a surface-reaching fracture. Estimated SI2 to P2 clarity and I to J colour, assessed mounted. One of the claws needs re-tipping and the mount has general wear throughout, with heavier wear and patchy tarnishing to the sides of the setting. Gross weight approx. 3.2gm.
A COLLECTION OF JEWELLERY, comprising a diamond panel brooch/pendant, of openwork scrolled design, the graduated rose-cut diamonds in foiled closed-back settings, a diamond single stone ring, similarly set with a rose-cut diamond, a boulder opal stick pin, stamped '9c', a yellow metal wedding band, with possible Dutch lion's head mark, and a cultured pearl bar brooch, brooch/pendant length 3.55cm (5) Approx. gross weights only: wedding band 7.9gm, bar brooch 1.7gm, diamond set brooch 7.1gm, single stone ring 1.7gm, stick pin 3.5gm
AN ARTS AND CRAFTS PENDANT NECKLACE, designed as a trio of hammered panels, each centred with a ceramic roundel, connected by chain-link swags, (some swags deficient, later shortened), together with an Arts and Crafts style gem set pendant necklace, and a bar brooch possibly by Bernard Instone, decorated with beaded flowerheads and foliage, stamped 'Silver B.I', first necklace length 29.5cm (3) Condition report - First necklace: Two swags are missing to each side of the central panel. The panels have considerable wear, shallow dents and heavy tarnishing, with splits/thinning to the setting edges. Chips, fractures, pitting and scuffs to roundels. Heavy wear, thinning and occasional splits to chain links. It is possible that the necklace would have originally been longer, as the current length is very short. Length of largest panel approx. 3.8cm. Green stone pendant necklace: Chips, scuffs and nicks to stones. General wear to mount and chain, with scuffs, chips and scratches. Solder joins visible at junctions within panel. The chain has been extended with baton-link sections that do not match the remainder of the chain. The clasp may be later. Total chain length approx. 71cm, pendant length approx. 7.9cm. Brooch: General surface wear and patchy tarnishing throughout. Length approx. 3.9cm.
A GARNET AND DIAMOND CROSS PENDANT, designed as a cross of octagonal and circular mixed-cut garnets, framed by graduated old and rose-cut diamonds, below a pear-shaped garnet bale, two colour precious metal mounted, total diamond weight approximately 0.25ct, length 7.5cm Condition report: Garnets have slightly variable orangey-red and purplish-red hues, the largest stone measuring approx. 15.5mm length x 7mm width x 3.7mm depth. All garnets contain multiple mineral and needle-like inclusions that are visible to the unaided eye, some stones also contain surface-reaching fractures. All have scuffs, nicks and chips to the surface. Diamonds have variable colour and clarity, some stones containing dark mineral inclusions, surface-reaching fractures and chips, some stones with yellow or grey tints. One of the central diamonds is very heavily included and this stone may be a later replacement. Estimated SI1 to P3 clarity and H to M colour, assessed mounted. The edges of the garnet settings are worn, with splits and occasional solder repairs. The upper jump ring fitting has a dark solder join and the back of the bale has been filed. The mount has general surface wear, chips and scuffs, with areas of pitting and porosity and patchy tarnishing. There is a dark solder join/repair to the centre of the mount, between the circular-cut garnet and upper octagonal-cut garnet. Metal standard is untested but possibly a gold/silver combination. Gross weight approx. 16.2gm.
A RUBY, OPAL AND DIAMOND SET BANGLE, of hinged oval form, set to the top with a line of cabochon opal flowerheads, each centred with a cushion-shaped mixed-cut ruby in collet setting, spaced by similarly set cushion-shaped old-cut diamonds, yellow precious metal mounted, total diamond weight approximately 0.20ct, inner diameter 6cm Condition report: Rubies are well matched, of pinkish-red hues, some stones with faint colour zoning, fractures/feather inclusions and areas of iridescent ‘silk’ inclusions. All have surface abrasion, scuffs and chips. Rubies graduate from approximately 4mm x 3mm to 4.5mm x 3.5mm in length x width. Diamonds are well matched, bright and lively, but one stone is chipped and another stone has a surface-reaching fracture. Estimated SI1 to P3 clarity (due to chip) and H to J colour, assessed mounted. Opals have variable play of colour, most stones with shades of pink, green and blue to a whiteish ground, and all have surface scuffs, chips and fractures. One of the diamond settings has been knocked to one side and this setting has been repaired to the back with a reinforcing panel and associated dark solder joins. The bangle mount has surface wear, scuffs and nicks throughout, with a shallow dent/impression to the back. The clasp is functioning. Metal standard is untested. Gross weight approx. 21.8gm.
Loading...
