An Edwardian 18ct gold sapphire and diamond five stone ring, with alternating mixed cut sapphires and Swiss cut diamonds, claw set, to scroll shoulders and a 'D' section shank, Chester 1904, 3.27g.Finger size NCondition report: Some porosity to inside of shank.Solder joins visible at inside base of shank.Some wear to claws.Surface marks/scratches to gold.
We found 398886 price guide item(s) matching your search
There are 398886 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
398886 item(s)/page
An Edwardian gold three stone diamond ring, with a row of graduated old European cut diamonds, claw set to the boat shaped head, to tapered shoulders and a 'D' section shank, marked 18ct, 3.12g.Finger size RCondition report: Surface marks/scratches to mount.Shank is very slightly oval.Some wear to the claws.
A gold and platinum single stone diamond bar brooch, with an old European cut diamond, with an estimated weight of approximately 1.98ct, claw set to a scroll collet, to gold knife edge bar faced in platinum, with gold pin and safety catch, tested as approximately 18ct gold and platinum, 4.16g.Diamond assessed as approximately:Colour I/JClarity VS1/VS2Condition report: Diamond measures approximately 7.92 - 8.01 x 4.89mm.
A gold single stone diamond ring, with an old European cut diamond, estimated as approximately 1.35ct, claw set to a scroll collet, with tapered chenier shoulders and a 'D' section shank, 2.96g.Finger size LCondition report: Diamond measures approximately 7.54 x 6.83 x 4.38mm.Minor surface marks/scratches to mount.Surface reaching inclusions to the diamond with some indented naturals and some chips/nibbles to the girdle.
A gold single stone diamond ring, with an old European cut diamond, with an estimated weight of approximately 0.48ct, claw set to a rex collet, with solid tapered shoulders and a 'D' section shank, tested as approximately 18ct gold, 1.89g.Finger size OCondition report: Surface marks/scratches/tarnish to mount.Indented natural to girdle of diamond.
A gold single stone diamond ring, with an old brilliant cut diamond, with an estimated weight of approximately 0.40ct, claw set, to spear shaped shoulders grain set with eight cut diamonds, and a 'D' section shank, tested as approximately 18ct gold, 2.30g.Finger size LCondition report: Surface reaching inclusions to the old brilliant cut diamond and some nibbles to girdle edge.Principle diamond measures approximately 5.18 x 4.20 x 2.93mm.Surface marks/scratches to mount. Claws one, and one claw missing entirely. Some wear to the sides of the underbezel.
A pair of gold single stone diamond stud earrings, with a brilliant cut diamond, estimated as approximately 0.32ct total, four claw set in white, to yellow posts and butterfly fittings, tested as approximately 18ct gold with later 9ct gold scrolls, 1.13g (2)Condition report: Diamonds measure approximately 3.5mm.Very dirty, would benefit from being cleaned.Scrolls are later replacements.
A gold four stone diamond ring, with a row of graduated brilliant cut diamonds, grain set to illusion collets, with a 'D' section shank, tested as approximately 18ct gold, 2.64g.Finger size PCondition report: Surface marks/scratches to mount.Some wear to the edges of the shoulders.Diamonds a little dirty, would benefit from being cleaned.
An 18ct gold single stone diamond ring, with a pear cut diamond claw set to a white gold collet, to yellow gold chenier shoulders and 'D' section shank, London, interior shank marked 034, believed to be a known diamond weight of 0.34ct, 2.55g.Finger size JCondition report: Surface marks/scratches to mount.Diamond loose in setting. Seems secure but we recommend attention from a professional setter.Diamond a little dirty, would benefit from being cleaned.
An 18ct gold three stone diamond cluster ring, with a graduated row of princess cut diamonds, claw set, to surround of brilliant cut diamonds, all claw set to a wire basket, with tapered chenier shoulders and a 'D' section shank, Birmingham, 3.94g.Finger size QCondition report: Minor surface marks/scratches to mount.Diamonds a little dirty, would benefit from being cleaned.
An 18ct gold three stone diamond ring, import hallmark London 1997, shank interior marked .25, believed to be a known total diamond weight of 0.25ct, together with a gold three stone diamond ring, tested as approximately 18ct gold, 5.07g total (2)Finger size N¼, JCondition report: Surface marks/scratches to mounts.Heads of rings a little dirty.Some wear to claws.
Three gold diamond set rings, to include a single stone diamond ring with rose cut diamond set shoulders, tested as approximately 18ct gold, a diamond set cluster ring, tested as approximately 18ct gold, and a 9ct gold diamond set crossover band ring, London 1999 (3)9ct gold - 2.09g, 18ct gold - 4.91g totalFinger size K, J, KCondition report: Surface marks/scratches and dirt to all.Single stone ring is worn on the side of the gallery and underbezel.
An 18ct white gold single stone emerald cut diamond ring, an emerald cut diamond, with an estimated weight of approximately 1.00ct, claw set to tapered chenier shoulders and a plain shank with stabilising beads fitted, London, 3.28gCondition report: Diamond measures approximately 7.82 x 5.19 x 2.67mm.Diamond assessed as approximately:Colour M-NClarity VS1-VS2Cannot accurately measure finger size due to the stabilising beads. The ring sits at an R½ on the ring stick, but due to the stabilising beads would fit on a larger finger.Casting of collet seems a little crude.
A white gold three stone diamond ring, with three graduated brilliant cut diamonds, with estimated weights of 0.95ct and 0.47ct each, all four claw set in plain collets, with open tapered shoulders to a plain shank, marked 18ct, no.31974046, head 15.30 x 6.50, 4.98g.Finger size NCondition report: Marks to the mount.The claws are all intact, but some are getting a bit thin. It would be advisable to let a setter check it and quote for re-tipping if required.An indented natural to one shoulder diamond.Diamonds estimated as approximately:Colour H/IClarity SI1/SI2The girdle of the principle diamond has a laser inscribed girdle: "IGI 31974046 INFINITY 009"The IGI report states that the principle diamond has a weight of 1.05ct.We do not have a copy of the report, but the details can be viewed online.
A platinum three stone diamond ring, with a graduated row of brilliant cut diamonds, claw set, to open tapered shoulders and a plain shank, marked PLAT, tested as approximately platinum, 3.43g.Finger size N½Condition report: Minor surface marks/scratches to mount.Some wear to claws and underbezels.Diamonds estimated as approximately 0.80ct total.Centre diamonds assessed as approximately:Colour G-HClarity SI1-SI2Side diamonds assessed as approximately:Colour I-JClarity VS1-VS2The ring is circa 1950.
A white gold four stone diamond cluster ring, with a pair of old European cut diamonds, estimated as approximately 0.90ct each, claw set on the diagonal to scroll collets, with a smaller old European cut diamond claw set to each interstice, to crossover shoulders and a plain shank, tested as approximately 18ct gold, 3.26g.Finger size QCondition report: Principle diamonds measure approximately 6.00 x 3.84mm and 6.10 x 3.80mm.Small diamonds measure approximately 3.50mm each. Minor surface marks/scratches to mount.Head of ring and diamonds a little dirty, would benefit from being cleaned.Some nibbles to the girdles of the principle diamonds.The principle diamonds are assessed as approximately:Colour I-JClarity SI1/SI2
A platinum diamond half eternity ring, c.1950, with a graduated row of brilliant cut diamonds, all claw set, to a tapered shank, stamped PLAT, tested as approximately platinum, 3.76g.Finger size MCondition report: Base of shank worn.Sides of claws are very worn, and some claws show signs of having been retipped. One replacement Swiss cut stone, badly chipped.The largest diamond measures approximately 3.40mm, the smallest approximately 2.40mm. The total diamond weight is estimated as approximately 1.00ct
A pair of 9ct white gold single stone diamond stud earrings, a brilliant cut diamond grain set to an illusion collet, to post and butterfly fittings, hallmark worn, possibly Sheffield 1979, with later replacement metal butterflies, 1.12g (2)Condition report: Surface marks/scratches to gold.Wear to hallmarks.Butterflies are later replacements, and are metal.
A pair of 18ct gold single stone ruby stud earrings, with a circular mixed cut ruby, approximately 4.8mm and 5.0mm in size, claw set to post and butterfly fittings, London 2018, 1.27g (2)Condition report: Posts very slightly bent.Butterfly fittings a little loose.Some surface reaching inclusions to the rubies.
A quantity of gold ruby set jewellery, to include a 9ct gold single stone ring with heart motif shoulders, possibly London, a 9ct gold cluster ring, Birmingham 1979, a trefoil pendant, rubies possibly synthetic, tested as approximately 9ct gold, and a pair of pear cut earrings, rubies possibly synthetic, tested as approximately 9ct gold, 4.23g total (5)Condition report: Cluster ring very dirty.Butterflies to earrings do not match.
A 9ct gold glass set fob, London 1964, suspended on a 9ct gold oval belcher link chain with bolt ring clasp, London, 570mm long, 12.77gCondition report: Some minor nicks to the glass stone.Surface marks/scratches to gold.Bolt ring looks a little small for the gauge of chain, is possibly a later replacement.
A gold single stone synthetic orange sapphire ring, with an emerald cut synthetic orange sapphire, 13.84 x 12.01 x 5.72mm, claw set to twisted wire shoulders and a 'D' section shank, tested as approximately 9ct gold, 6.04g.Finger size N¾Condition report: Some abrasion to the synthetic sapphire.Surface marks/scratches to mount.
A gold single stone citrine ring, with an emerald cut citrine, approximately 18.5 x 13.5 x 8.0mm, claw set to a chenier gallery and plain shank, tested as approximately 9ct gold, together with a pair of gold citrine clip earrings, with an emerald cut citrine, approximately 13 x 10 x 7mm, double claw set to hinged clip fittings, tested as approximately 9ct gold, 13.77g total (3)Finger size MCondition report: Ring:All claws have been retipped, and solder joins to new claws are visible.Claws are at angles to the stone, not straight on the corners. Some abrasions to the citrine.Surface marks/scratches to mount.Shank slightly out of shape.Earrings:Surface marks/scratches to gold.Some porosity to a couple of the claws.
A gold single stone citrine ring, with an emerald cut citrine, 21.5 x 17.2 x 11.5mm, four claw set to scroll shoulders and a plain shank, tested as approximately 9ct gold, 13.33gCondition report: Some scratches and abrasions to citrine.Surface marks/scratches to mount.Shank very out of shape.Sizing join visible at base of shank.
A 9ct gold single stone smoky quartz ring, an oval mixed cut smoky quartz, approximately 18 x 13mm, eight claw set at an angle, to scroll shoulders and a plain shank, London 1963, 6.64g.Finger size LCondition report: Sizing join visible at base of shank.Surface marks/scratches to mount.Very minor abrasions to facet junctions of smoky quartz, visible under 10x magnification, not visible with the naked eye.
Three single stone smoky quartz rings, to include an emerald cut smoky quartz ring, tested as approximately 9ct gold with later 14ct gold shank, 7.08g, a 9ct gold oval smoky quartz ring, London 1974, 4.45g, and a smaller oval smoky quartz ring, Birmingham 1971, 2.14g (3)Finger size M½, N½, KCondition report: Minor abrasions to the smoky quartzes.Surface marks/scratches to mounts.Sizing joins visible at base of shank of smaller oval ring, and one claw deficient.Solder joins visible at shoulders of emerald cut ring.
A gold single stone amethyst ring, with an octagonal mixed cut amethyst, approximately 22 x 16 x 10mm, four claw set to open shoulders and a plain 'D' section shank, 12.12g.Finger size MCondition report: The collet tested as approximately 18ct gold. The shank tested as approximately 18ct and 14ct gold, with a clear demarcation line along the length of the shank. It is possible that mixed metal wires were rolled together to form the shank.Minor surface marks/scratches to mount.Some porosity in the 14ct gold half of the shank.Some very minor nicks/scratches to the amethyst.
A gold single stone amethyst ring, with an oval mixed cut amethyst, approximately 27 x 16mm, claw set to split shoulders and a 'D' section shank, tested as approximately 9ct gold, 8.79g.Finger size L-M approximatelyCondition report: The claws to the amethyst are not flush to the stone, although the stone does appear to be secure.Shank out of shape, and at an angle to the collet.Pavilion of stone comes below the bottom of the collet, as such it is not possible to accurately measure the finger size. The finger size catalogued is an approximation only. Surface marks/scratches to mount.A chip to the amethyst and some nibbles to the girdle edge.
A 9ct gold single stone amethyst ring, with an oval mixed cut amethyst, approximately 14 x 10mm, rub set to a fluted border, with split shoulders and a 'D' section shank, Birmingham, together with a pair of 9ct gold amethyst stud earrings, with scroll border, to post and butterfly fittings, Birmingham, 6.62g total (3)Finger size LCondition report: Sizing join visible at base of shank.Surface marks/scratches to gold.
A pair of gold peridot drop earrings, with an oval mixed cut peridot, claw set, surmounted by an articulated wire bar, to hook fittings, tested as approximately 9ct gold, 26mm long, 0.92g (2)Condition report: The peridots are slightly different in size.The clawed collets to the peridots are quite rough, especially to the smaller of the two peridots. Some of the claws to this stone are not over the stone, or are at an angle. Abrasions/nibbles and some minor chips to the peridots.
A gold blue topaz and diamond three stone ring, an emerald cut blue topaz, four claw set, with a baguette cut diamond rub set at each side, to open shoulders and a plain shank, tested as approximately 18ct gold, 4.21g.Finger size MCondition report: Surface marks/scratches to mount.Blue topaz slightly loose in setting.Some wear to the claws.Some minor nibbles to the facet junctions of the blue topaz.The blue topaz measures approximately 10.20 x 8.05 x 5.36mm.The diamonds measure approximately 4.00 x 2.00mm.
An 18ct gold two stone diamond and sapphire crossover ring, with a brilliant cut diamond and a circular mixed cut sapphire, claw set, to crossover shoulders and a plain shank, London 1985, 2.04g.Finger size LCondition report: Some wear to the claws, and to the shank.Minor surface marks/scratches to mount.
A gold blue zircon and diamond three stone ring, with an emerald cut blue zircon, approximately 9 x 7mm, with an old European cut diamond at each side, all claw set to tapered chenier shoulders and a plain shank, tested as approximately 18ct gold, 3.24g.Finger size PCondition report: Abrasions to facet junctions of the blue zircon.Head of ring a little dirty, would benefit from being cleaned.Wear to claws.Surface marks/scratches to mount, and shank thinner at base.
A gold single stone blue zircon ring, a circular mixed cut blue zircon, approximately 8mm, claw set to a scroll collet, with tapered chenier shoulders and a 'D' section shank, tested as approximately 18ct gold, 3.36g.Finger size M¼Condition report: Abrasions/wear to facet junctions of blue zircon.Wear to claws.Surface marks/scratches to mount.
A white gold single stone blue zircon ring, the circular mixed cut blue zircon, approximately 12.5mm, claw set to a rex collet, with tapered chenier shoulders and a 'D' section shank, tested as approximately 9ct gold, 4.08g.Finger size F½ approximatelyCondition report: All claws have been retipped, joins visible.Light wear/nibbles to facet junctions of blue zircon.Surface marks/scratches to mount.Solder join visible at shank.
A quantity of blue zircon jewellery, to include a pair of 9ct gold single stone blue zircon earrings by Deakin & Francis, the blue zircon approximately 7.5mm, claw set to post fitting, butterflies deficient, Birmingham 1958, 1.65g, a two row blue zircon and cultured pearl bracelet, with three blue zircons, approximately 8 to 8.8mm, claw set to white gold collets, with two rows of cultured pearls between, to white gold box clasp and figure of eight safety catch, tested as approximately 9ct gold, 185mm long, and a graduated blue zircon bar brooch (4)Condition report: Abrasions/nibbles/wear and some minor chips to the blue zircons.Central blue zircon in bracelet looks a little too small for the collet.Some wear and discolouration to the silk in the bracelet.Butterflies deficient from earrings.Roller catch to brooch tested as approximately silver. Some parts of the collets tested as approximately silver, but some areas not giving a reaction with the silver acid.
A gold single stone opal ring, with an oval cabochon opal, rub set, to wing shoulders and a 'D' section shank, split at base, tested as approximately 9ct gold, 6.44g.Finger size S½Condition report: Shank is split at base.Surface marks/scratches to mount.Opal is abraded.Opal is possibly later to the shank - it appears the opal collet has been let in to the head of the ring.
A gold pearl and diamond cluster ring, a row of brilliant cut diamonds claw set to the centre, to surround of cup set cultured freshwater pearls, one deficient, with wire surrounds, to trifurcated shoulders and a plain shank, tested as approximately 14ct gold, 4.17g, together with a pair of gold two stone cultured pearl earrings, with post and butterfly fittings, tested as approximately 18ct gold with later 9ct gold butterflies, 5.76g (3)Finger size NCondition report: Surface marks/scratches to gold. One pearl missing from the ring.Earrings are a little dirty, would benefit from being cleaned.
A silver and gold paste set ring, the head tested as approximately sterling silver, with gold half shank tested as approximately 9ct gold, together with a similar four stone opal ring (2)Condition report: Some abrasions and discolouration to the paste.Surface marks/scratches/tarnish to silver and gold.
An Edwardian 18ct gold boat shaped ring, the centre stone, deficient, flanked either side by an old Swiss cut diamond and a demantoid garnet, to 'D' section shank, Birmingham 1904, together with an 18ct gold illusion set three stone diamond ring, London 1974, 4.32g total (2)Finger size K, LCondition report: Centre stone missing from the Edwardian ring.Minor abrasions to the garnets.Minor surface marks/scratches to mounts of both.
A small quantity of jewellery, to include a gold split pearl dress stud, marked 18, tested as approximately 18ct gold, a gold stick pin with vacant threaded finial, tested as approximately 18ct gold, a gold diamond set dress stud with screw fitting, marked 15, tested as approximately 15ct gold, a single stone earring, tested as approximately 9ct gold, a 9ct gold bar brooch with metal pin, a dress stud fitting, tested as approximately 9ct gold, and a paste set stick pin with silver collet and gold pin tested as approximately 9ct gold (7)18ct gold - 3.23g total, 15ct gold - 1.68g, 9ct gold - 3.20g total
A quantity of Victorian and later jewellery, to include an 18ct gold old cut diamond ring, two stones deficient, Birmingham 1902, a gold pierced engraved Masonic charm, tested as approximately 18ct gold, a gold pearl and diamond three stone ring, one diamond deficient, and a gold ruby and diamond three stone ring, one diamond deficient, both with wire shanks, tested as approximately 18ct gold, a gold Edwardian photo locket, damaged, tested as approximately 15ct gold, a Victorian gold memorial locket with woven hair to a glazed panel, with 'In Memory Of' to black enamel border, with pin and 'C' catch, tested as approximately 9ct gold with metal pin, a gold swastika charm, tested as approximately 9ct gold, and an Edwardian gold photo locket, tested as approximately 9ct gold (8)9ct gold (including glazed panels) - 10.66g total, 15ct gold - 4.63g, 18ct gold - 6.53g totalCondition report: Two wire shank rings are out of shape. Each ring with one diamond missing. Wear to the settings. Two diamonds missing from the diamond ring, remaining claws very worn. Underneath of head very dirty.15ct photo locket has losses to the decorative surround.Spectacle set locket has dents to the gold, and a base metal jump ring.Memorial brooch has a loose pin, and a chip to the glazed panel.
A gold single stone smoky quartz ring, an octagonal mixed cut smoky quartz, approximately 27 x 20mm, claw set to a plain shank, tested as approximately 9ct gold, 16.35g, together with a 9ct gold opal triplet ring, Birmingham, 5.56g, and a low grade gold 'D' section wedding ring, marked 333, 3.17g (3)Finger size L, R, U
Four 9ct gold rings, to include a ruby and split pearl set fan shaped ring, London 1978, a single stone blue topaz ring, Birmingham, an openwork twist head ring, London, and a synthetic spinel eternity ring, London, 11.93g total (4)Finger size O, K½, N¾, O LECondition report: Surface marks/scratches to gold.Synthetic spinels are abraded.
A gold cubic zirconia ring and pendant suite, tested as approximately 9ct gold, ignore markings, together with a gold single stone synthetic colour change corundum ring, tested as approximately 9ct gold, and a gold single stone coated ‘mystic’ topaz ring, tested as approximately 14ct gold (4)9ct gold - 22.49g total, 14ct gold - 6.47gFinger size J approximately, J½, KCondition report: Surface marks/scratches to all mounts.Shank to cubic zirconia ring is slightly oval.
A pair of 18ct white gold single stone aquamarine stud earrings, with an oval mixed cut aquamarine, approximately 6 x 4mm, claw set to post and butterfly fittings, Sheffield, together with a pair of 18ct white gold pink tourmaline earrings, with an oval cabochon pink tourmaline, approximately 8 x 6mm, claw set to post and butterfly fittings, London 1999, 3.43g total (4)Condition report: Butterfly fittings to aquamarine earrings do not match.Butterfly fittings a little loose.Posts a little bent.
A gold single stone smoky quartz ring, with an oval mixed cut smoky quartz, approximately 20 x 15mm, to open shoulders and a plain shank, tested as approximately 9ct gold, together with a 9ct gold single stone synthetic spinel ring, London, possibly 1960, and a 9ct gold paste set bracelet by Payton Pepper, Birmingham 1953, 25.00g total (3)Finger size O, OCondition report: Wear/abrasions to all stones.Both shanks slightly out of shape.Solder joins and bleed at base of shank to smoky quartz ring.A later replacement metal bolt ring to the bracelet.
A quantity of rings, to include a 9ct gold fire opal and diamond ring, Sheffield 1991, a 9ct gold emerald and diamond cluster ring, London 1983, a 9ct gold sapphire and paste ring, London 1985, a 9ct gold single stone paste ring, Birmingham 1978, a 9ct gold single stone smoky quartz ring, worn, London 1965, a silver banded agate ring, a silver tiger's eye ring, a metal moss agate ring, etc. (11)9ct gold - 9.24g total
A gold single stone opal doublet ring, with an oval opal doublet, approximately 16.0 x 11.5mm, claw set to foliate shoulders and a 'D' section shank, tested as approximately 9ct gold, 3.06g, together with a Dutch silver 'Zeeuwse knoop' or 'Zeeland knot' brooch, with pin and roller catch (2)Finger size FCondition report: Some nibbles/abrasion to the opal doublet.Ring a little dirty.Surface marks/scratches to mount.Opal a little short for the collet.
A quantity of gold jewellery, to include a gold opal and plique-à-jour enamel dragonfly pendant, tested as approximately 9ct gold, 45mm long, a white gold pink and colourless topaz cross pendant, on filed curb link chain with side lever clasp, tested as approximately 9ct gold, chain 470mm long, a pair of gold single stone cubic zirconia stud earrings, with post and butterfly fittings, tested as approximately 9ct gold, a 9ct gold garnet cluster ring, London, a carved dyed lavender jade charm with gold bolt ring, tested as approximately 14ct gold, and a gold cubic zirconia horseshoe pendant with split Prince-of-Wales chain, tested as approximately 14ct gold (7)9ct gold - 7.37g total, 14ct gold - 1.66gFinger size L
-
398886 item(s)/page