A rare George III yellow metal and emerald three stone ring, the central oval emerald measuring approx. 6.4 x 4.8mm, flanked by twin rounded rectangular emeralds, each measuring approx. 4.2 x 4.8mm, in bead setting and bearing hallmark to the band, ring size P 1/2, approx. 2.75g.Additional InformationThe ring has previously been assessed as hallmarked for 1793 although it is difficult to assess whether it is 1793 or 1813. There are some abrasions to the emeralds and the yellow metal setting around the emerald is also misshapen in parts. There are a couple of surface marks to the ring but it is possible that the band has been repaired at some stage.
We found 400830 price guide item(s) matching your search
There are 400830 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
400830 item(s)/page
A 18ct yellow gold emerald and diamond seven stone ring, each round brilliant cut diamond and emerald weighing approx 0.10ct, size M 1/2, approx 3.6g.Additional InformationOverall in good condition, well matched stones, slight inclusions to the emeralds and diamonds when viewed with a loupe.
An 18ct yellow gold and diamond fourteen stone twin row graduated diamond ring, the two largest diamonds each weighing approx 0.50ct graduating to 0.15ct, size Q, approx 8.4g, total diamond weight 2.90ct.Additional InformationVery minor surface scratches, the band is very slightly misshapen. The diamonds are only showing inclusions through a loupe, face up very nicely white and are well matched. They are of good colour.
An 18ct yellow gold seven stone diamond cluster ring, the brilliant cut stones totalling 4.26ct, size P, approx 5.7g.Additional InformationThe ring head is approx 17.9mm across, the diamonds are well matched, facing up nicely white. Inclusions only visible with a loupe. General surface wear to the band but a very impressive ring.
An 18ct yellow gold emerald and diamond three stone ring, the emerald cut emerald weighing approx 2ct flanked by twin tapering baguette cut diamonds each weighing approx 0.20ct in raised mount, size P 1/2, approx 5.5g.Additional InformationThe emerald measures approx 7.7mm x 7.7mm x 5.4mm, has previously been assessed as Columbian but no paperwork to back this up. It is heavily included as you would expect. The diamonds are well matched but facing up nicely white with just minor surface wear. We cannot confirm the stone origin. Hallmarked for Birmingham 1999, makers mark BMS.
A yellow metal diamond and pink stone dress ring with three graduated pale pink stones centred with four old cut small diamonds, unmarked, size S, approx 4.3g.Additional InformationSurface abrasions to the pink stones, the diamonds are drawing slightly, the ring is unmarked. The tips of a couple of claws have rubbed away and require attention. General surface wear.
An 18ct yellow gold and diamond ring, the central old cut collet set stone within an open framework of sixteen further tiny old cut diamonds, ring size O 1/2, approx. 2.3g.Additional InformationThe hallmark is slightly obscured, the collet setting around the central diamond has a couple of dents to it as does the outer setting. The diamonds are included and drawing yellow.
An 18ct yellow gold diamond solitaire ring, the cushion cut stone weighing approx. 0.25cts in ten claw setting, ring size P 1/2, approx. 3.5g.Additional InformationTwo of the claws are worn away. There are a couple of chips to the edge of the diamond. The diamond is included and slightly drawing yellow. Some surface scratches to the band.
A 9ct yellow gold and Blue John ring, size Q, two 9ct yellow gold and opal rings (one missing stone), an opal cluster 9ct gold ring and a 9ct gold wishbone ring, combined approx. 16.35g (5).Additional InformationThe Blue John is very heavily surface scratches and internally fractured. As detailed, on opal is missing. Surface scratches to the opals. The opal cluster ring is misshapen, tips of claws slightly rubbed.
An 18ct yellow gold diamond and ruby five stone ring, the diamonds weighing approx 0.15ct each, size S, approx 2.2g.Additional InformationThe band is quite heavily worn and thinning in parts, some of the claws would require attention with tips worn away. The rubies have heavy abrasions to the surface. The diamonds are heavily included and the setting in general is worn. One tip of the claw for the central ruby is completely missing.
An 18ct yellow gold sapphire dress ring, size O, approx. 2.55g (stone missing), and a 9ct yellow gold and silver mounted dress ring, size M 1/2, approx. 1.8g (2).Additional InformationSapphire ring is misshapen, one stone is missing, surface abrasion throughout with heavy wear to the setting, the second ring has heavy wear to the setting and general surface wear throughout.
A yellow gold, platinum mounted diamond and sapphire cluster ring, size M 1/2, approx 2.3g, and a yellow metal dress ring with pale blue stone, size M, approx 3.4g. (2)Additional InformationThe sapphire ring has been resized and the repair has gone through the hallmark obscuring the gold content. Surface abrasions to the sapphire, the diamonds are quite flat and included. The size of the head of the ring is 10.1mm x 8.7mm. General surface wear to both.
A 9ct yellow gold curb link necklace with two stone opal drop pendant, together with a 14ct yellow gold bar brooch set with a central moonstone, 9ct gold bar brooch set with amethyst coloured stone, Victorian 9ct gold stick pin and a yellow metal ring, set with cultured Pearl, size O, combined weight 14.4g (5).
An 18ct yellow gold diamond and sapphire five stone ring centred with a round brilliant cut diamond weighing approximately 0.15cts, with irregular cut diamonds flanking and round cut sapphires to the ends, size Q, approximately 2.3g. Additional InformationAccompanied by an insurance valuation from 1990, stating the value at £500. General surface wear throughout, the ring is quite thin in parts, the diamonds are included when viewed with a loupe, but the setting is sound.
A white metal diamond set cocktail ring with central collet set stone with a stepped border of round brilliant and baguette cut diamonds, size M, approximately 7.75g. Additional InformationThe central diamond is sealed to the back, it is of very poor colour and quality, diameter 6.5mm. Surface wear throughout and some scratches.
An 18ct white gold and ten stone channel set diamond ring, size L, approx. 2.4g, and a yellow metal diamond and emerald eleven stone half eternity ring, size O, approx. 2.1g (2).Additional InformationBoth with minor surface scratches, the yellow metal example is thinning on the band and the stones have surface abrasions with some attention needed to a couple of the claws.
A 9ct yellow gold wedding band, size O 1/2, approx 2.3g, and two 18ct yellow gold three stone diamond rings, J /12 and O, combined 3.8g (3).Additional InformationThe diamonds are heavily included and drawing yellow, a couple of tips of one of the rings are a little worn. General surface wear to all three.
An 18ct white gold and diamond three stone ring, the central stone weighing approx. 0.50cts flanked by twin stones each weighing 0.33cts, size Q, approx. 2.75g. Additional InformationThe stones are facing up very nicely white and are well matched. With a loupe you can see a couple of inclusions. The setting is rather rough in parts, misshapen around the edges but overall in good condition.
An 18ct yellow gold three stone diamond ring, the old cut stones weighing approx. 0.33cts and 2x0.25cts, ring size M 1/2, approx. 4.5g.Additional InformationThe diamonds are collet set, some surface scratches to the gild, They are well matched and you can only see inclusions through a loupe.
An 18ct yellow gold and diamond solitaire ring, the claw set round brilliant cut stone weighing approx. 1.90cts, ring size M, approx. 3.13g.Additional InformationThe stone is drawing heavily yellow, is also included when viewed with a loupe. Measures approx. 8.57mm diameter, 4.47mm in depth. General surface scratches to the band.
An 18ct yellow gold wedding band set with three tiny diamonds, ring size J, approx. 3g, and an 18ct gold sapphire and diamond three stone ring, size O, approx. 1.65g (2).Additional InformationSapphire is medium to dark in colour, the diamonds are very small but face up nicely, general surface wear to both but overall in good order.
A platinum sapphire and diamond three stone ring, with central square cut sapphire flanked by twin round brilliant cut diamonds, size U 1/2, approx. 3.5g.Additional InformationEach diamond weighs approx. 0.20cts. Heavily included. Heavy surface abrasions to the sapphire. One claw slightly misshapen and general surface wear.
A white metal amethyst and diamond ring, set with cushion cut amethyst with Swiss cut diamonds to the shoulders, size N, approx. 3.5g. Additional InformationThe amethyst measures approx. 13.5 x 11.7mm, with a depth of 5.1mm. Light surface abrasions to the stone. General surface wear throughout.
An 18ct yellow gold diamond set crossover dress ring, with twin brilliant cut diamonds, size O, approx. 4.9g and an 18ct white gold three stone diamond set ring, size K, approx. 6.4g (2).Additional InformationDiamonds drawing yellow and are included. Quite heavy surface scratches to the shanks.
An 18ct yellow gold solitaire diamond ring with brilliant cut stone and an 18ct yellow gold princess cut diamond solitaire ring, the diamond weighing 0.27cts, sizes L and O, combined approx. 6.2g.Additional InformationThe round cut stone is heavily drawing yellow and is included. The princess cut stone is of good white colour. Both have surface scratches to the shanks.
An 18ct yellow metal sapphire and diamond three stone ring, the circular sapphire flanked by collet set diamonds, in swept mount, ring size K 1/2, approx. 5.6g.Additional InformationThe sapphire is of poor quality, heavily colour zoned, it is dark in colour, The diamonds are too small and collet set to grade. General surface wear throughout. Stamped 18ct.
-
400830 item(s)/page