There are 400830 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribeBOODLES: DIAMOND SINGLE-STONE RING, 2016Set with a 0.70 carat brilliant-cut diamond, the gallery set with similarly-cut diamonds, mounted in platinum, signed Boodles, maker's mark, London hallmark, ring size approx. O½, maker's case and boxFor further information on this lot please visit Bonhams.com
A pair of white gold single stone diamond stud earrings, with a brilliant cut diamond, with a stated total weight of 1.13ct, claw set to post and butterfly fittings, marked 750, tested as approximately 18ct gold, 1.37g (2)Condition report: The earrings are in a good overall condition, with some very minor surface scratches to the mounts.The diamonds are assessed as approximately:Colour K-LClarity SI2-I1
A three stone diamond ring, with a row of graduated brilliant cut diamonds, claw set to rex collets, to chenier shoulders grain set with eight cut diamonds, and a plain shank, marked PLAT, 3.00g. Finger size JCondition report: A chip to the girdle of one of the side stones.Minor surface marks/scratches to mount, and wear to the sides of the underbezels.Centre diamond measures approximately 4.90 - 4.94 x 2.85mm, estimated as approximately 0.42ct.
An 18ct white gold seven stone diamond ring, with a row of brilliant cut diamonds, grain set, to a plain tapered shank, London 1978, 5.32g.Finger size QCondition report: Some wear to the rhodium plating, would benefit from being re-plated.Sizing joins visible to shank.The diamonds measure approximately 3.40mm each, estimated as approximately 1.00ct total.
A gold three stone garnet crossover ring, with a row of circular mixed cut garnets, approximately 7mm, claw set to crossover shoulders and a plain shank, tested as approximately 9ct gold, 4.21g.Finger size O½Condition report: Head of ring dirty, would benefit from being cleaned.Minor surface marks/scratches to mount.
A 9ct gold three stone garnet ring, with an oval mixed cut garnet with a triangular mixed cut garnet at each side, to openwork twisted wire frame and a plain shank, Birmingham 2007, 3.41g.Finger size NCondition report: Some minor facet junction wear to the garnets.Surface marks/scratches to mount.
An 18ct gold ruby and diamond five stone ring, by Deakin & Francis, with a row of graduated mixed cut rubies and Swiss cut diamonds, claw set, to split shoulders and a plain shank, marked 18ct, 2.57g.Finger size NCondition report: Some facet junction wear to the rubies.Minor wear to claws.Surface marks/scratches to mount.Some porosity to the mount and a crack to one shoulder.Sizing join visible at base of shank.
A 9ct gold single stone citrine ring, with an oval mixed cut citrine, rub set to a navette shaped head, to tapered shoulders and a plain shank, Birmingham 1965, 5.06g.Finger size MCondition report: Surface marks/scratches to mount.Sizing join to shank just visible, some solder has bled into hallmark when sized.Some facet junction wear to the citrine.The citrine measures approximately 18 x 9mm.
A 9ct gold single stone smoky quartz ring, with an oval mixed cut smoky quartz, approximately 18 x 13mm, claw set to a scalloped collet, to trifurcated shoulders and a plain shank, London 1972, 4.52g.Finger size MCondition report: Stone a little loose in setting.Minor surface marks/scratches to mount.
A 9ct gold single stone smoky quartz ring, with an oval mixed cut smoky quartz, approximately 20.0 x 15.5mm, claw set to a scroll gallery, with open shoulders and a plain shank, London 1979, 6.69g.Finger size L¾Condition report: Some facet junction wear/scratches to the smoky quartz.Surface marks/scratches to mount.
A pair of silver single stone emerald stud earrings, with an oval mixed cut emerald, approximately 8 x 6mm, claw set to post and butterfly fittings, 1.52g (2)Condition report: One of the emeralds set at a slight angle in the collet.Surface reaching inclusions to the emeralds, possibly fracture filled.
A gold malachite ring, with a rectangular malachite block with a pierced gold cage, to pierced shoulders and a plain shank, tested as approximately 14ct gold, head 27 x 12mm, 11.03g.Finger size J-K approximatelyCondition report: Glue visible to underneath of head where malachite has been glued to the gold cage.Surface marks/scratches to shank.A chip to the underside of the malachite, and what appears to be a crack running through the centre of the stone.
A gold single stone peridot ring, with an oval mixed cut peridot, claw set, to white gold shoulders and a yellow gold shank, tested as approximately 9ct gold, 2.61g.Finger size PCondition report: Facet junction wear to the peridot.Surface marks/scratches to mount.Sizing joins visible at base of shank.
An 18ct gold three stone sapphire and diamond ring, an oval mixed cut sapphire with a brilliant cut diamond at each side, all rub set, to tapered shoulders and a 'D' section shank, Sheffield 1999, 3.74g.Finger size LCondition report: Shank thinner at base.Some surface marks/scratches to mount.
A gold five stone sapphire and diamond ring, with a row of graduated mixed cut sapphires and old brilliant cut diamonds, all grain set to slightly tapered shoulders and a later replacement shank, tested as approximately 18ct gold, 3.61g.Finger size LCondition report: Surface marks/scratches to mount.The shank is a later replacement.Sides of head and shank worn, a little sharp.Head of ring a little dirty, would benefit from being cleaned.Facet junction wear to the sapphires.
An 18ct gold sapphire and diamond three stone ring, with a pear mixed cut sapphire with a brilliant cut diamond at each side, all claw set to the curved head, with a flat section shank, London 1980, 3.00g.Finger size JCondition report: Some facet junction wear and surface reaching inclusions to the sapphire.Minor surface marks/scratches to mount.
A white gold single stone aquamarine ring, with a step cut aquamarine, 17.4 x 13.7 x 9.1mm, claw set, to trifurcated shoulders and a 'D' section shank, marked 18ct, 8.18g.Finger size NCondition report: Minor nibbles and wear to the facet junctions of the aquamarine.Some surface marks/scratches to mount.
A white gold blue topaz and diamond three stone ring, with an emerald cut blue topaz, approximately 6 x 4mm, claw set, with a brilliant cut diamond grain set to an illusion collet at each side, to a flat section shank, marked 375, 2.84g.Finger size PCondition report: Some very minor facet junction wear to the blue topaz.
A pair of white gold blue topaz earrings, with a square step cut blue topaz, end set, to post and hinged omega fittings, tested as approximately 18ct gold, 10.36g (2)Condition report: One of the blue topazes is chipped, and is loose in the setting. Some facet junction wear to the other blue topaz, and a smaller chip to the corner of this stone.Surface marks/scratches to gold.
A white gold single stone amethyst ring, with a round mixed cut amethyst, approximately 16mm, claw set to solid tapered shoulders and a plain shank, tested as approximately 18ct gold, 5.80g.Finger size J approximatelyCondition report: Some nibbles/facet junction wear to the amethyst.Underneath of amethyst a little dirty.Ring has previously been sized, a small section of 9ct white gold has been added to the base of the shank.Minor surface marks/scratches to mount.Pavilion of amethyst extends below the bottom of the setting, as such the ring does not sit properly on the ring stick, and the finger size is an approximation only.
A 9ct gold single stone amethyst ring, with an oval mixed cut amethyst, approximately 18 x 13mm, rub set to applied scalloped decoration, with split shoulders and a ‘D’ section shank, London 1973, 5.64g. Finger size LCondition report: Minor surface marks/scratches to mount. Some scratches to the amethyst.
A gold single stone amethyst ring, with a cushion mixed cut amethyst, approximately 12 x 10mm, claw set, to tapered shoulders and a 'D' section shank, marked 9ct, tested as approximately 9ct gold, 4.67g.Finger size M½Condition report: Amethyst dirty, would benefit from being cleaned.Shank slightly oval.Surface marks/scratches to mount.Some scratches to the amethyst.
An antique style single stone opal ring, with an oval cabochon opal, rub set in a closed back gadroon collet, to scrolling scalloped shank with applied white spear head shoulders, head 12.00 x 9.70mm, 5.07g.Finger size P-Q approximatelyCondition report: Will not pass assay.Head tested as approximately 18ct gold.Shank tested as approximately 9ct gold.Shoulders tested as approximately silver. Noticeable scratches and marks.Cabochon scratched and abraded.
A gold single stone cultured pearl ring, tested as approximately 18ct gold, 2.83g, together with a gold single stone imitation pearl pendant, tested as approximately 18ct gold, suspended on a gold curb link chain with half solid bolt ring, tested as approximately 9ct gold, and a rolled gold imitation pearl pendant, suspended on a gold filed trace link chain with bolt ring, tested as approximately 9ct gold (3)Finger size RCondition report: The two gold chains weighs a total of 4.90g.Surface marks/scratches to gold.Both chains very worn.Bales to both pendants worn.
A gold single stone amethyst bar brooch, with an oval mixed cut amethyst, approximately 16.4 x 11.5mm, claw set to a scalloped collet, later applied to a gold bar brooch, with pin and 'C' catch, the collet tested as approximately 18ct gold, the bar and fittings as approximately 9ct gold, 4.83g, together with a white gold cultured pearl cluster bar brooch, with pin and safety catch, tested as approximately 9ct gold, 2.51g, and a gold garnet set bar brooch, tested as approximately 14-15ct gold, 2.51g (3)Condition report: Pin to pearl brooch is bent. Minor surface marks/scratches to gold. Some facet junction wear/nibbles to the amethyst.
Three 9ct gold rings, to include a single stone nephrite ring, Birmingham 1975, a synthetic spinel cluster ring, Birmingham 1971, and a ruby and diamond cluster ring, London 1996, 8.82g total (3) Finger size N, N, MCondition report: Surface marks/scratches to all mounts. Ruby is possibly fracture filled.
Two 9ct gold rings, to include a sapphire and diamond ring, Birmingham, and a three stone fracture filled ruby ring, Birmingham 2005, 4.73g total (2)Finger size O, NCondition report: Surface marks/scratches to both mounts.Some facet junction wear to the sapphire.Surface reaching inclusions to the fracture filled rubies.
An 18ct gold sapphire and diamond three stone ring, with a round mixed cut sapphire, claw set, with an eight cut diamond grain set to an illusion collet at each side, to open shoulders and a flat section shank, London 1975, 4.13g, together with a 9ct gold ruby and diamond cluster ring, Birmingham 1988, 1.07g (2)Finger size M½, J½Condition report: Some nibbles to the sapphire. Minor surface marks/scratches to mount. Claws to the sapphire have previously been retipped.Some facet junction wear to the ruby. Surface marks/scratches/tarnish to mount. Shank slightly oval.
Three gold rings, to include a 9ct gold cultured pearl ring, London 1967, a 9ct gold sapphire and diamond half eternity ring, London 1978, and a gold two stone diamond crossover ring, tested as approximately 18ct gold (3)9ct gold - 5.88g total, 18ct gold - 2.15gFinger size O, R, KCondition report: Surface marks/scratches to mounts.Nacre to pearls very worn. Sizing joins visible at bases of shanks of both 9ct gold rings. Sizing join to pearl ring cracked.Diamond ring shank slightly out of shape. Sides of gallery worn.
A gold single stone diamond ring, with an old cut diamond grain set to a box collet, to an openwork off-set frame and plain shank, tested as approximately 14ct gold, 1.88g, together with a 9ct gold garnet and split pearl cluster ring, London 1975, 4.62g (2)Finger size N½, MCondition report: Diamond ring: surface marks/scratches to mount.Garnet ring: garnet very abraded. Some wear to the nacre of some of the split pearls. Surface marks/scratches and some porosity to mount.
A gold single stone diamond ring, with an old cut diamond claw set to a scalloped collet, with tapered shoulders and a 'D' section shank, tested as approximately 18ct gold, 1.90g, together with a 9ct gold single stone diamond ring, London 1979, 1.35g (2)Finger size N½, KCondition report: 18ct ring: Surface marks/scratches to mount.Shank very slightly oval.A crack at the base of the shank.9ct ring:Surface marks/scratches to mount.Surface reaching inclusions to the diamond.
Three gold rings, to include a 9ct gold garnet ring, c.1970, the head with polished and textured plates, claw set with scattered garnets, to a plain shank, Edinburgh 1976, 4.48g, a 9ct gold single stone cubic zirconia ring, Sheffield, 7.82g, and a gold three stone synthetic ruby ring, tested as approximately 14ct gold, 3.21g (3)Finger size M, N, MCondition report: Some claws missing to the synthetic ruby ring.
A 9ct gold garnet and paste ring, with an emerald cut garnet, with a trefoil of paste at each side, to solid tapered shoulders and a flat section shank, London 1991, together with an Edwardian 9ct gold five stone garnet ring, two stones deficient, Chester 1910, 7.09g total (2)Finger size S, J approximatelyCondition report: Five stone ring:Two stones missing. Hollow ring mount very dented, and shank splitting at base.
A gold diamond set ring, set with a row of graduated old cut and eight cut diamonds, one deficient, tested as approximately 18ct gold with a later half shank, tested as approximately 15ct gold, 2.29g, together with a gold single stone paste ring, tested as approximately 9ct gold, 1.51g (2)Finger size Q½, NCondition report: Diamond ring: one diamond missing, all claws very worn, shank is a later replacement and is a lower carat gold, surface marks/scratches to mount.Paste ring: One claw snapped, remaining claws very worn, two claws show signs of having been previously replaced, paste very loose, surface marks/scratches.
A gold single stone diamond ring, with a Swiss cut diamond grain set to an illusion collet, to split shoulders and a 'D' section shank, tested as approximately 9ct gold, shank marked BRAVINGTONS, 2.00g, together with a low grade gold single stone amethyst ring, marked 333, 2.11g (2)Finger size N½, QCondition report: Diamond ring: wear to the sides of the gallery.Amethyst ring: some facet junction wear to the amethys.Surface marks/scratches to mounts.
Loading...
