A mid-19th Century Silver Cased Open Face Lever Watch, unsigned, No 1432, the gilt movement with engraved cock signed patent, with jewelled end stone, blued steel screws and mono-metallic balance, with engraved regulation scale and plain finned pillars and fitted with dust cover, and escapement with jewelled palettes, to a Roman and Arabic enamel dial with outside minute track and subsidiary seconds (hairlines and rim chip), and fitted with spade hands, in a hinged and polished case with Chester hallmarks, date letter and maker obscured, with engine-turned back cover centred with a vacant gartered cartouche and milled band, width 2” 1093. A late 19th Century Silver Cased Open Face Pocket Watch, unsigned, No 321588, the frosted gilt movement with blued steel screws and engraved cock with jewelled end stone, to a bi-metallic cut compensated balance with blued steel hairspring and silvered regulation scale, to a Roman enamel dial (chip at 6), with outside minute track, sunk subsidiary seconds and gilt spade hands, in a hinged and polished case, the back cover centred with a vacant and gartered cartouche, with milled band, marked for Chester 1898, Maker’s Mark TPH and numbered 230921, width 2”
We found 186097 price guide item(s) matching your search
There are 186097 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
186097 item(s)/page
A late 19th Century Swiss Silver Cased Open Face Pocket Watch, the frosted gilt ¾ plate movement with mono-metallic balance, to a Roman enamel dial with outside minute track (hairline at 4), with sunk subsidiary seconds and gilt hands, in a hinged and polished case marked Fine Silver, and numbered 51510,4, width 1 7/8”; together with a base metal graduated curb link Watch Chain with T-bar and Swivel (2) 1098. A 1st quarter of the 20th Century Silver Cased Open Face Pocket Watch, unsigned, 500751, the frosted gilt movement with bi-metallic cut compensated balance and blued steel hairspring with silvered regulation scale and blued steel screws, with finned pillars and fitted dust cover, to a Roman enamel dial (hairlines), with outside minute track, sunk subsidiary seconds and blued steel hands (hour hand A/F), in a hinged case with engine-turned back cover centred with a vacant and gartered cartouche, and coin milled band (lacking bow and button), Birmingham 1909, Maker’s Mark WF and with corresponding case number, width 2 1/8”
A Mixed Lot comprising: a Lever Pocket Watch Movement signed J T Cremer – Chelmsford, No 1157, the frosted gilt movement with diamond end stone, bi-metallic cut compensated balance and signed dust cover, to a Roman enamel dial (hairline and rim chip); together with a further Lever Movement signed Russell Bros – London, 50717, with frosted gilt movement and jewelled end stone with bi-metallic cut compensated balance and blued steel hairspring, with silvered regulation scale and fitted dust cover, to a numbered Roman enamel dial with outside minute track, sunk subsidiary seconds and gilt spade hands; a further frosted gilt and jewelled Movement with bi-metallic cut compensated balance and blued steel overcoil hairspring, to a an Arabic enamel dial, signed “International Watch Co”, and with gilt hands; and two further Pocket Watch Movements, various dates and makers (conditions vary) (5)
A late 19th/early 20th Century Patinated and Lacquered Brass Surveyor’s Level, C F Casella & Co, 11-15 Rochester Row, London, SW, 7943, the mounted sight glass with side screw adjustment and fitted level, to a demi-lune frame with scale of + to – 30 degrees, and mounted on a silvered and signed compass, with rotating outer 360 degree rim and fitted with two further levels, and contained within a fitted mahogany case with adjustable tripod stand, width 10 ½”
An early 19th Century Mahogany and Boxwood line inlaid Wheel Barometer, A Molinari – Halesworth, the swan neck pediment to a detachable and silvered single scale alcohol thermometer, to a convex mirror over a spun brass bezel enclosing an 8” silvered dial, with scale of 28-31, signed to the centre, height 38”
An early 20th Century Mahogany and Boxwood Line inlaid Aneroid Wheel Barometer, the shaped case inlaid with foliate swag and urn detail, and fitted with a twin scale porcelain backed mercury thermometer, to a sprung brass bezel set with bevelled glass enclosing a 4 ¾” porcelain dial, signed Aithison & Co, Opticians to HM Govt, London and Leeds, to a scale of 26-31, height 27”
A 1st half of the 19th Century Mahogany and inlaid Wheel Barometer of large proportions, J & M Riva – Glasgow, the case surmounted by a swan neck pediment and central cast brass urn, to an angular neck set with a detachable single scale silvered mercury bow fronted thermometer, to a spun brass bezel with convex glass enclosing a 12” silvered dial with engraved compass centre, and scale of 28-31, to a signed rectangular level below, height 48”
A mid-19th Century Mahogany and Boxwood line inlaid Wheel Barometer, Beha, Lickert & Co – Norwich, the swan neck pediment (A/F) to a balustered throat with detachable single scale silvered alcohol thermometer, to a spun brass bezel with convex glass enclosing a signed 7 ½” silvered dial with scale of 28-31, height 38”
An early 20th Century Oak Cased Combination Timepiece and Aneroid Barometer, the pierced and carved “C” scroll and foliate case set with a spun brass bezel and bevelled glass enclosing a 3 ½” Roman dial with outside minute track and blued steel moon hands, and centred with a single scale silvered mercury thermometer, to a further spun brass bezel and bevelled glass enclosing a 4 ½” dial with scale of 25-31, height 21 ½”
A 2nd quarter of the 20th Century chrome plated Combination Desk Timepiece/Barometer/Thermometer, the polished rectangular case set with a bevelled glass and bearing an applied presentation plaque “Presented to Sir Louis B Baron, by the Blaina Miners, June 15th 1932”, to a silvered rectangular 9” dial, set to the left with an Aneroid Barometer scale of 27-32, with central twin scale mercury thermometer and to the right by an Arabic chapter ring with blued steel pierced hands, to a spring-driven movement; together with a copy of The South Wales Gazette June 17th 1932 highlighting the presentation, width 9 ½”
A George III mahogany bracket timepiece with fusee movement, the painted arch dial with Roman numerals and inscribed `Edgar & Co, Pont Street, Belgrave Square`, the arched case inlaid with satinwood paterae and boxwood stringing, flanked by gilt brass pierced scale fret panels, on a rectangular base and bun feet, height approx 44cm, together with pendulum.
A pair of Samson type Worcester style Continental porcelain dishes, late 19th/early 20th Century, painted with panels of birds and flowers within gilt frames against a blue scale ground beneath a foliate moulded rim, underglaze blue fretted square style mark to base, together with a similar pair of hexagonal vases.
A Worcester style circular pottery bowl, early 20th Century, with pierced decoration, decorated with a panel depicting an exotic bird amongst foliage against a scale blue ground, unmarked, possibly Booths, together with a small group of other ceramics including five green glazed leaf moulded wares (some faults).
Two George III mahogany pocket compasses The first by Casella, London, the second unsigned, both early 19th century. Each with square folding mahogany case enclosing brass-edged circular glazed aperture containing paper scale and blued steel N/S pointer, the first signed CASELLA, LONDON to centre within 32 point rose annotated with abbreviated orientations and an outer scale calibrated in degrees, the case 6.8cm wide, the second with 16 point rose and similar outer scale, the case 5.4cm wide; with a BARKER`S PATENT black japanned brass field compass circa 1918, signed J.H. STEWARD Ltd, STRAND, LONDON with floating card and hinged glazed sighting apertures, 5.5cm diameter, (3).
A brass surveyor`s sighting compass dial Potter, London, 19th century, The 4 inch circular silvered dial with foliate engraved eight-point compass rose with direction annotations and signed Potter, Poultry, London to centre within scale annotated in tens 0-90 for each quadrant and further raised scale calibrated 0-360, the pivoted steel pointer with locking arm, mounted on a shaped plate with extensions fitted with hinged opposing sighting arms each with tension line and hairline slot viewing apertures, 21cm (8.25ins) long, mounted via a ball and socket joint onto original mahogany tripod stand with two-part threaded legs. John Potter succeeded R.B. Bate who is recorded in Banfield BAROMETER MAKERS AND RETAILERS as working at 31 Poultry London up to 1849, Banfield records Potter as working from the same address 1850-84 and was appointed maker to the Lords Commissioners of the Admiralty.
A brass bound mahogany cased `Mansfield Patent Water Finder` W. Mansfield & Co., Liverpool, early 20th century The brass-edged box with glazed aperture to top enclosing a circular opaque glass scale with central pin-pivot for the magnetised steel needle and inscribed MANSFIELDS PATENT AUTOMATIC WATER FINDER Co., LIVERPOOL with scale sector annotated 40-0-40 degrees to far edge, the front with hinged flap to allow access for installing the pivoted steel needle, complete with leather carrying strap, leather outer case containing two cased needles, folding mahogany tripod and OBSERVATIONS log book, (pocket compass lacking), the instrument 26cm high.
A gilt brass aneroid pocket barometer/altimeter, J. Lizars, Glasgow, late 19th century, The silvered dial with blued steel pointer and adjustable bezel calibrated in feet around fixed inner scale calibrated in barometric inches and signed J. LIZARS GLASGOW. EDINBURGH ETC to centre, the watch-form case with knurled crown for adjusting the altimeter scale within the pivoted suspension loop, diam 5cm, in original leather covered outer case with trade label to inside of cover. John Lizars is recorded in Banfield, Edwin ??BAROMETER MAKERS AND RETAILERS 1660-1900 as working at various addresses in Glasgow from 1858.
A gilt brass aneroid pocket barometer/altimeter Callaghan, London, late 19th century, The silvered dial with blued steel pointer and adjustable bezel calibrated in feet around fixed inner scale calibrated in barometric inches and signed CALLAGHAN, 23A NEW BOND ST., LONDON. W. to centre, the watch-form case with pivoted suspension loop, diam 5cm, in original leather covered outer case with trade label to inside of cover. William Callaghan is recorded in Clifton, Gloria Directory of British Scientific Instrument Makers 1550-1851 as trading from 23A New Bond Street, London 1859-75.
A brass cased Naudet pattern aneroid `Holosteric` barometer with alcohol and mercury thermometers Unsigned, circa 1865, The 7 inch circular open-centred silvered register calibrated in barometric inches to upper section and mounted with alcohol and mercury Reaumur, Fahrenheit and Centigrade scale thermometers to lower section, the upper margin of the centre inscribed HOLOSTERIC BAROMETER and with serial number 5559 between the thermometer bulbs, the circular bevel glass fitted with a brass recording pointer retained in a moulded brass case with suspension loop, diameter 21cm. The current lot is an English version of the model produced by the firm of Naudet, Hulot & Cie in Paris after Vidie`s patent for the aneroid barometer had expired in 1859. A similar example by Edward George Wood of London was sold in these rooms The Banfield Collection of Barometers 4th September 2007 lot 18.
A Regency mahogany sympiesometer, Adie, Edinburgh, circa 1825, With glazed rectangular silvered scale applied with sulphuric acid and hydrogen gas filled syphon tube against a Fahrenheit temperature scale with a separate scale calibrated for the barometric inches adjusted via brass knob slider to the right-hand side of the case, to the left is a Fahrenheit scale mercury thermometer above inscription PATENT, Adie, Edinburgh with sector for the rotating recording disc with serial number No. 1286 beneath, the simple rectangular case with reeded moulded surround, 60cm high. Alexander Adie is recorded in Banfield, Edwin BAROMETER MAKERS AND RETAILERS 1660-1900 as born 1775 and dying in 1858. Adie was the nephew of John Miller, one of the leading Scottish makers of Scientific Instruments in the 18th century and was apprenticed to him in 1789. In 1804 they formed the partnership of Miller and Adie which continued until the death of John Miller in 1815. Adie continued the business alone specialising in meteorological instruments obtaining a patent in 1818 for his air barometer or sympiesometer. In recognition of this invention he was elected a Fellow of the Royal Society of Edinburgh in 1819. He was appointed optician to William IV and later Queen Victoria after forming a partnership with his son, John, in 1835. The sympiesometer was patented by Alexander Adie in 1818 and is essentially an improved version of Robert Hooke`s thermobarometer which he described in a paper presented to the Royal Society in 1668. The hydrogen gas in the syphon tube is affected by both temperature and pressure so the instrument has to be first calibrated by adjusting the moveable barometric scale against the temperature calibrations so that the pointer lines up with the temperature reading on the mercury thermometer to the left of the syphon tube before a reading can be taken from the top of the fluid level. The sympiesometer was conceived as an alternative to the mercury marine barometer as it was smaller thus more portable.
A Dutch inlaid mahogany mercury contra-barometer J. Stopanni, Amsterdam, 19th century The two-section urn surmount outlined pewter scales with ribbon bow crest decorated signature cartouche above applied spirit Fahrenheit and Reaumur scale thermometer to the left hand scale, the centre tube flanked by scales for both English and French barometric inches, the right hand main scale annotated with additional amplified English barometric inches incorporating the Dutch `36` scale calibrated 20-0-16 with the 0 representing the mean pressure at sea level in The Netherlands, the case with parquetry banded broken triangular pediment and vase finial above chevron banded frieze panel and glazed front door with conforming inlay to surround, the box base with three half bell-shaped inserts and two vase shaped pendant finials, 127cm high overall.
A Victorian mother-of-pearl inlaid rosewood mercury wheel barometer, Gardiner, Glasgow, mid 19th century. The 8 inch terrestrial sphere centred circular silvered register calibrated in barometric inches and with the usual observations beneath bowfronted alcohol Fahrenheit scale thermometer and hygrometer to the swan neck pediment, the square base with rectangular spirit level signed GARDINER, GLASGOW, the case with fine mother-of-pearl foliate marquetry borders and cavetto moulded underside to base, 98cm high.
A Regency mahogany mercury wheel barometer, P. Lyon, South Molton, early 19th century. The 8 inch star-centre engraved circular silvered register calibrated in inches beneath convex mirror and arched Fahrenheit scale spirit thermometer and hygrometer to the swan neck pediment, the rounded base with spirit level signed P. LYON, SOUTH MOLTON and with recording pointer adjustment square, the case with ebony and box wood lined edges, 97cm. Provenance: The late Mr Michael Stoop.
A lacquered brass and printed paper novelty `Chronosphere` timepiece. Richard et Cie, London and Paris, early 20th century. The 6 inch sphere applied with twelve hand coloured gores annotated with countries, principal cities, major topographic features and steamer routes etc, the North Pacific with oval cartouche PATENT 19460, RICHARDS CHRONOSPHERE, supported via a clockwork driven rotating polar shaft on a tapered fluted upright fitted with support for the canted Roman hour scale annotated Meridian ring and arm for a brass lunar sphere, the top finial with curved hour pointer, on drum shaped plinth base containing French made eight-day movement and stamped MADE IN FRANCE, ?328 to baseplate, 30cm high.
An impressive French engraved gilt brass Renaissance style table clock, Planchon, Paris, late 19th century. The eight-day two train gong striking movement with VINCENTI & Cie, MEDAILLE D`AGANT 1855 medallion and stamped PLANCHON, PALAIS-ROYAL to backplate, the dial with demi-lune aperture painted with sun opposing a moon on a 24 hour disc so that each in-turn act as the hour hand against the engraved Roman numerals to the arch of the aperture, within raised silvered minute ring with steel hand applied with brass solar mask, the case modelled as an oversized German Renaissance `Turmchenuhr` with spire finials and fishscale engraved cast ogee shaped cupola to the double galleried tower upstand within further baluster arcade with conforming corner finials, the front engraved with flowering foliage within an arch with cloud infill around minute ring, the angles applied with baluster three-quarter pilasters with foliate capitals and bases on two-tier plinths, the left hand side engraved with a sunburst decorated mock quadrant sundial scale above fine recessed stylised dolphin and foliate scroll decorated panel and strapwork cast mount bearing date 1554, the right hand side engraved with an allegorical figure dressed in Renaissance style armour looking into a solar disc within an arch, with conforming recessed engraved panel and strapwork mount relief cast Planchon, Palais-Royal beneath, the rear with rectangular door, 65cm high. Matieu Planchon was apprenticed to his father and subsequently worked for several of the leading French makers including Robert Houdin prior to setting up business at Palais Royal, Paris in 1890. He specialised in high-end novelty clocks such as floating turtle timepieces, and imaginative recreations of Renaissance and other historic models. The current lot demonstrates his high quality approach in both attention to detail of the design and in the execution, the scale of the clock is also perhaps suggestive of an object made for exhibition.
An ebonised bracket clock with moonphase, Bearing signature John Hull, Harold, late 18th century. The five pillar twin fusee movement with 6 inch brass break-arch dial with matted centre within applied silvered Roman numeral chapter ring with lozenge half hour markers, Arabic five minutes to outer track and bearing signature John Hull, HARROLD to lower edge, the angles with gilt mask and scroll pattern spandrels beneath arch with foliate engraved lunettes and herringbone decorated upper border interrupted by a sector revealing scale for the age of the moon to the rim of the moon disc, in an inverted bell top case with brass carrying handle above circular over concave-topped side windows with raised mouldings, the front door with foliate cast brass frets to upper quadrants and conforming mouldings, on cavetto moulded skirt base with later block feet (lunar disc now disconnected, movement with faults), 46cm (18ins) high excluding handle.
A small collection of The Armour Collection by The Franklin Mint 1-48th scale military model aircraft, comprising an F-117 Stealth US Air Force, a Junker JU52, an A10 Warthog, a B-17 bomber `Memphis Belle`, a B-25 Mitchell and an F-14 Eagle US Air Force, all within window boxes (boxes lightly creased and scuffed).
Twenty-eight approximately 1/1250 scale waterline models of merchant ships, including an Albatros-K-Modell No.Alk305, Hurst Point, boxed; Wirral Miniature Ships unnumbered Benavon, boxed; unknown Exxon Valdez; Klabautermann No.KLA32B, P. & O. Ferries Pride of Bilbao; Tri-ang Minic No.P622, (1/2000 scale) M.V. City of Durban, boxed; and Tri-ang Minic No.P622, (1/2000 scale) M.V. Table Bay, boxed.
A Space Models 1/200 scale resin model of Concorde, on a display stand, 31cm long; an Airfix No.SK700, 1/144 scale unmade plastic kit of Concorde, boxed; and a Bristol blue glass limited edition Concorde commemorative paperweight, `Goodnight Sweetheart / Concorde 26-11-2003`, engraved to the base `Western Daily Press / 388/2000 / Bristol`, 10cm diameter, (3).
-
186097 item(s)/page