This lot will be auctioned on Tuesday, June 29th. The auction will begin at 9:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on June 30th or July 1st. A Moonraker 6 shuttle model miniature from Lewis Gilbert's space spy adventure Moonraker. Constructed by a corporation headed by Hugo Drax (Michael Lonsdale), Moonraker 6 launched from an aeronautics complex in the Amazon, transporting James Bond (Roger Moore) to Drax's secret space station. Various scales of Moonraker shuttles were built by Derek Meddings' model team for the film, with this being one of the smallest scale shuttles at 16". Contructured of resin, this white and orange model miniature is based on the design of a NASA Space Shuttle Orbiter. It features three clustered black space engines, a dark brown underbelly and nose cone, a "Moonraker" marking on both sides and a tail rudder with a black "6" on both sides. The interior is rigged with pipes for pluming liquid nitrogen that would simulate engine exhaust on camera. The underside of the model also features several holes where it was previously mounted during filming. Derek Meddings model work is highly sought after and scarce, and Moonraker's visual effects were highly regarded upon its release. The piece exhibits wear and some damage from use and age, including extensive cracking with some missing body components. Minor stabiliziation and paint in-fill has been applied to improve its aesthetic, and it is in overall fair condition. Dimensions: 16" x 10" x 7" (40.5 cm x 25.5 cm x 17.75 cm) Estimate: $6,000 - 8,000
We found 186094 price guide item(s) matching your search
There are 186094 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
186094 item(s)/page
This lot will be auctioned on Tuesday, June 29th. The auction will begin at 9:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on June 30th or July 1st. A promotional Black Pearl ship from Disney's fantasy swashbuckler Pirates of the Caribbean franchise. This 1/2-scale representation of the iconic vessel was displayed at various events sponsored by Disney, appearing for the final time in Santa Monica, California, in 2017. The highly detailed ship is constructed of hard-coated foam and wood finished with black paint and weathered with green stains on its lower half in order to simulate years of sea travel. It features rope-and-pulley rigging throughout, white-paneled false windows, sculpted pirate embellishments, and mermaid statues beneath the quarter and stern galleries. The ship itself rests on a large wood and steel platform with metal loops along the sides and gray faux stones on top. Also included are three masts stored inside the ship, three lanterns designed to illuminate, one stern crest, 12 cannon barrels, and a winged bow maiden. It is in fair overall condition with wear and weathering, including damage throughout the foam, from age and use at multiple events. Dimensions: 288" x 144" x 168" (731.75 cm x 366 cm x 426.75 cm) Stored off-site; see notice in the Buyer's Guide. Contains electronic components; see notice in the Buyer's Guide. Special shipping required; see notice in the Buyer's Guide. Estimate: $15,000 - 20,000
This lot will be auctioned on Tuesday, June 29th. The auction will begin at 9:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on June 30th or July 1st. An extensive set of production paperwork including wardrobe continuity books, a script, storyboards, and other documents as well as a panoramic photo compilations from James Cameron's romantic disaster film Titanic. Included in the lot is a set of 12 production-used binders containing extensive costume continuity information a large volume of printed copy photographs; production paperwork including schedules, budget information, status reports, and storyboard prints; one copy of James Cameron's screenplay dated May 7, 1996, with highlights and sticky note page markers throughout; one binder with production paperwork and an additional copy of the script with typed notes; one budget packet; one packet of 155-plus storyboard prints, one packet of 41 printed photo storyboards depicting a sequence titled "Rose Suicide Sequence"; three copies of the March 18, 1998 issue of Hollywood Reporter featuring George Lucas' message of congratulations to Cameron, illustrated by Iain McCaig; and two panoramic photo compilations that form images of the large-scale Titanic exterior set built for the film attached to a cardboard backing. The wardrobe continuity binders are a highlight, with numerous printed copy photos of the cast in costume including principals. All of the pages in the wardrobe continuity binders are color laser copies rather than being original Polaroid photos; it is a production-used reference copy of the binders. This comprehensive lot is in good overall condition with wear from age, including pages sticking together and some three-hole-punched papers tearing at the holes. Dimensions (largest): 40" x 22" x 0.5" (101.75 cm x 56 cm x 1.5 cm); (smallest): 11" x 8.5" x 0.5" (28 cm x 21.75 cm x 1.5 cm) Estimate: $2,000 - 3,000
This lot will be auctioned on Wednesday, June 30th. The auction will begin at 9:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on June 29th or July 1st. A large-scale, remote-controlled Huey helicopter model miniature from both Jim Abrahams' parody Hot Shots! Part Deux and John Woo's action film Broken Arrow. This Hirobo helicopter model was initially used for Hot Shots! Part Deux, then repainted and modified for use in Broken Arrow. It is constructed of carbon fiber with metal landing skids and features a model pilot in the cabin. The model is in good overall condition with visible signs of production use and age, including loosening to the cockpit and scuffing to the paintwork, most notably on the horizontal stabilizers and tail rotor. Its current functionality is untested. Dimensions: 52" x 10" x 17" (132 cm x 25.5 cm x 42.25 cm) Contains electronic components; see notice in the Buyer's Guide. Estimate: $2,500 - 3,500
This lot will be auctioned on Wednesday, June 30th. The auction will begin at 9:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on June 29th or July 1st. A Satyr head armor with horns from Andrew Adamson's fantasy adventure The Chronicles of Narnia: The Lion, the Witch and the Wardrobe. Satyrs were enchanted creatures with goat-like legs, and wore their armor as they fought alongside Aslan (Liam Neeson) in the First Battle of Beruna. This costume consists of a brown leather molded helmet with silver-color metal accents, resin horns and synthetic hair details; a brown contoured leather chestplate with a laminated plastic interior, silver-color metal studs and a pair of leather thigh guards with leather scale accents; and a brown leather belt with etched details, silver-color metal studs and leather scale accents. It exhibits signs of wear from age and use, but remains in good overall condition Estimate: $2,500 - 3,500
This lot will be auctioned on Wednesday, June 30th. The auction will begin at 9:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on June 29th or July 1st. A pair of hand-drawn dinosaur concept sketches by illustrator Jack Johnson for Joe Johnston's sci-fi action sequel Jurassic Park III. Raptors ambushed Dr. Grant's (Sam Neill) crew in an abandoned lab. This lot consists of one concept sketch for an unused magnified raptor eye shot rendered in ink on paper and one for a wide-scale "beauty shot" rendered in pencil on vellum labeled with various dinosaurs' names. They are in fair overall condition with tears and staining to both pieces. Dimensions (vellum): 13" x 40" (33" x 101.75 cm); (paper): 8.5" x 11" (21.75 cm x 28 cm) Sold without copyright; see notice in Buyer's Guide. Estimate: $800 - 1,200
This lot will be auctioned on Tuesday, June 29th. The auction will begin at 9:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on June 30th or July 1st. A Terror Dog stop-motion puppet from Ivan Reitman's sci-fi comedy Ghostbusters. Gozer the Gozerian (Slavitza Jovan) brought two gargoyles to life as demonic dogs with glowing red eyes. The Terror Dogs were created by Boss Film Studios using a combination of stop-motion animation and puppetry, ultimately earning the film an Academy Award® nomination for Visual Effects. This hand-painted, 1/4-scale foam latex puppet was crafted by production from original Dog molds, but was ultimately not used onscreen. It is cast around a wire armature and affixed to a black cloth-wrapped wood base. This puppet remains in good overall condition due to preservation work conducted by a Boss Film Studios employee, including the application of a flexible protective coating. Dimensions: 24" x 16" x 12" (61 cm x 40.75 cm x 30.5 cm) Estimate: $6,000 - 8,000
This lot will be auctioned on Thursday, July 1st. The auction will begin at 9:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on June 29th or June 30th. A biting Piranha hand puppet with soft teeth from John Gulager's horror comedy sequel Piranha 3DD. Bloodthirsty prehistoric piranhas attacked employees and patrons of a newly-opened waterpark. This foam latex hand puppet was used for shots where it bit through plates and grates. It features a multicolor scale painted exterior, acrylic eyes, and an open mouth filled with pointed silicone and wire teeth. The rear features an armhole that allows a puppeteer to control the biting movements. Additionally, there is a plunger connected to plastic tubing which runs to a hole at the top of the mouth for pumping blood through the piece. This puppet shows signs of wear from age and use, but remains in good overall condition. Dimensions: 22" x 11" x 4" (56 cm x 28 cm x 10.25 cm) Estimate: $1,500 - 2,500
This lot will be auctioned on Thursday, July 1st. The auction will begin at 9:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on June 29th or June 30th. A small-scale Davy Jones (Bill Nighy) digital animation reference bust from the production of Gore Verbinski's swashbuckling sequel Pirates of the Caribbean: At World's End. The bust was sculpted by Industrial Light & Magic's (ILM) Richard Miller as a character design reference for the digital animation team. This brown urethane bust features a removable hat built over a wire frame, a wooden base, and "07 R. Miller" carved into its back. It's in good overall condition with some wear, including cracking and pieces flaking off of the hat. Dimensions: 7.25" x 6" x 9.75" (18.5 cm x 15.25 cm x 25 cm) Estimate: $1,000 - 1,500
This lot will be auctioned on Thursday, July 1st. The auction will begin at 9:00am PDT and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on June 29th or June 30th. An Eagle 5 "I Love Uranus" bumper sticker model miniature from Mel Brooks' sci-fi comedy Spaceballs. A bumper sticker reading "I Love Uranus" was mounted to Lone Starr (Bill Pullman) and Barf's (John Candy) space Winnebago, Eagle 5. This white, black, and red resin bumper sticker model miniature was created for the 1/12-scale Eagle 5 model designed by chief model maker Grant McCune for space shots. It is in fair overall condition with several loose letters due to age and production use. It now reads "Love Uranu." Dimensions: 2" x 0.5" (5 cm x 1.5 cm) Estimate: $600 - 800
A Scratchbuilt 0 Gauge 3-rail GWR 14xx class 0-4-2 Tank Locomotive, appears fitted with a substantial motor/gearbox by Bond's or similar, with coarse-scale iron or steel wheels, the body neatly made and finished in unlined GWR green as no 1411, G, some damage to front footplate, one buffer and boiler handrails, a little paint loss to raised edges and a few other paint chips
A Collection of 0 Gauge/7mm scale Tram Models, including unmade finescale brass Blackpool Standard car kit by Wistow Models, VG, includes wheels but no motor or gears, unmade 'Brumtrams' card kits for 'Standard' (Dick, Kerr) 4-wheel tram and Liverpool Bellamy-roof 1st class car, a boxed Chinese-made plastic 'Heinz 57' bogie tram with fixed bogies for approx 28mm gauge and rather curious body design, and a boxed Swansea and Mumbles railway commemmorative porcelain money box tram, all G-VG, and a made-up card Gateshead car from Beamish museum, F (6)
A Coarse Scale 0 Gauge LMS (Ex L&Y) Hughes 4-6-4 Tank Locomotive, possibly commercially-built, currently arranged for outside-3rd rail pick-up, well-made and appears a little heavily finished in LMS crimson livery with yellow lining, probably over-varnished, as No 11114, fitted with Bassett-Lowke motor unit, coarse steel wheels with lining to rims, nickel-plated motion, overall G, a few small chips to paintwork on boiler, dome, smokebox and cylinders, in a painted wood carrying case
Four Scratchbuilt/kitbuilt G Scale SR Southern Railway ex Lynton and Barnstaple Railway Goods Rolling Stock, comprising bogie open wagon with barrel load, 4-wheel Open wagon with Sheep and another with sacks and 4-Ton Van, all finished in SR brown, VG built and finished to a good standard (4)
Eleven Sctatchbuilt/kitbuilt G Scale Lynton and Barnstaple Goods Rolling Stock, comprising bogie coal wagon, bogie bolster wagon with farm equipment load, bogie wagon with gravel load, various open wagons with loads (4), two Vans and two Brake Vans, VG, all built/modified and finished to a good standard (11)
Eleven Scratchbuilt/kitbuilt G Scale Welshpool and LLanfair Goods Rolling Stock, comprising twin 4-wheel timber wagon with load, various Open wagons with loads (4), open Cattle Truck with pigs, Flat truck with Boiler load, closed Cattle wagon with cattle load, Van and two Guards Van, G- VG, all built/modified and finished to a good standard (11)
Glyn Valley Railway and Private owners G Scale Scratchbuilt/kitbuilt Open Wagons with loads, comprising GVT wagons with stone loads(6), Ceirog Granite Co wagons with loads (2), VG, all built/modified and finished to a good standard, all except two ends with simple close couplings, two ends with LGB hooks (6)
Garden Railway Specialist G Scale 0-6-0 Loco Body and Chassis unmade kits, G126 0-6-0 Chassis Kit comprising Bühler Motor/Gearbox (one piece), Slater's Wheels, Pick ups, Steel Frames, Brass Fittings, castings and Instructions, DG282 Freelance 0-6-0 Body Kit for Tender Loco comprising Plastic Body, Chassis and Cab fittings, Tender and wheelsets (requires Chassis to complete), both kits in original white boxes, VG appear complete , not checked , boxes G (2)
Various G Scale LGB Tenmille and other makers Parts and Accessories, five Tenmille kit boxes each with acssortment of Loco parts including, cabs, smokebox covers, cab detail, motor, pistons, whitemetal parts, nameplates, conrods, chassis, wheels, various chimneys, transfers, GRS bogie Coach Roof and other items, P-G, boxes F (qty)
G Scale scratchbuilt Signal Boxes various Signals and other Accessories two well made Signal boxes (both with damage to steps), six scratchbuilt/kitbuilt plasti-card Signals, Water Tower, Lamps (2) and Seats (2) together with Lineside Delights Signal parts, Trolley with Milk Churn and Parcel, F-G, Buildings and Signals have been displayed outside and are grubby and will require cleaning, some with minor damage (qty)
An Uncommon Vintage Bassett-Lowke Live Steam Traction Engine, in original box and finished in crimson and black with red lining, wheels in yellow with red lining, overall length approx 15" (1" scale), with double-acting single cylinder, 3½" disc flywheel, reversing lever from footplate, regulator, gear drive to right wheel and screw-operated brake to left side, worm steering (chain broken on one side), safety valve, water gauge and straked wheels to rear, slightly modified with rubber tyres fitted all round, a 'Markie' pressure gauge and 'ring-type' spirit burner currently fitted in place of the B-L originals (the B-L spirit burner and tank are included in the lot, but not the original pressure gauge), overall G-VG, would benefit from careful cleaning, complete with a condition/overhaul report and boiler test certificate from Markie models dated 2005, which quotes original build date as 1955, box F-G, scuffs to corners and old tape damage
An approx 1½" scale (1/8th) Live Steam Compound 4-shaft Traction Engine, built to a very high standard, with compound cylinders driving through dog clutches on the second shaft (for low or high gear), with lever reversing from the footplate, water and pressure gauges, crankshaft-driven water pump, hand pump to tender tank, mechanical lubricator, the boiler appears to have 5 flue tubes, ashpan and firebars, overall length of model approx 25", VG-E, this engine has evidently seen a fair amount of use (from soot in the smokebox), and is finished in green with lined pale cream wheels, considerable paint blistering to boiler cladding, and comes together with a wooden display cabinet with sliding glass front doors, overall size 28" long x 17" high x 15" wide, VG
Dinky Toys (for Hornby 0 Gauge) larger-scale Figures, including most (5/6) of a No 1 station staff set with original box, and 17 other assorted figures including hikers, 2 hotel staff, 4 porters with baggage (two with FH initials to round case) and newspaper vendor, all G, moderate playwear (22 figures + box)
Attributed to Jan Jacobsz. van de Stoffe (Dutch, 1610-1682)A cavalry skirmishoil on panel20.5 x 26cmCondition report: Oil on a small wooden panel formed from a single board in a good condition. The thin paint layers are slightly raised following the horizontal woodgrain. In some areas this has led to fine scale losses and abrasion. There is retouching across the surface but mainly found in the sky. There appears to be two campaigns of overpaint, one is brushy and applied in a wholesale manner while other areas are finely applied following the horizontal lines. The retouching has darkened over time. The varnish is semi-matte and even but slightly yellowed.
A length of crewelwork fabric,by Chelsea Textiles, decorated with all-over meandering blossoming branches and a variety of large scale flowers, including poppy heads, magnolia and lilies, worked on natural linen,130cm wide13m long approximatelyCondition report: As new, still on the roll, lightly creased, no odour.
Worcester butter tub and cover, c.1770, polychrome decorated with flowers within gilt scrollwork cartouches, on a blue scale ground, the cover with flower finial, crescent mark to base, 10.5cm diameterCondition report: A few nibbles to the flower finial - otherwise in good order with no damage or repairs.
Loading...-
186094 item(s)/page