PREDATOR 2 (1990) - Collapsed CombistickA collapsed Combistick from Stephen Hopkins' Predator 2. Yautja Predators used advanced Combisticks to hunt down their opponents.This closed, static Combistick, designed specifically for the film by Academy Award® -winning special effects group Stan Winston Studio, is made of hollow resin with metal piping and green scale-like details painted on the sides. This version of the spear is cast in its "closed-down" state; the Predator's spears jut open to reveal many razor-sharp blades. It exhibits chipping paint on the tip. Dimensions: 9 cm x 9 cm x 42 cm (3.5" x 3.5" x 16.5")Estimate: £4,000 - 8,000 US View all lots from PREDATOR 2 (1990)View all lots from PREDATOR - ALL ITEMSBidding for this lot will end on Thursday, November 9th. The auction will begin at 3:00PM BST and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Friday, November 10th, Saturday, November 11th or Sunday, November 12th.
We found 186094 price guide item(s) matching your search
There are 186094 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
186094 item(s)/page
THE RIGHT STUFF (1983) - Medium-size Bell X-1 Model MiniatureA medium-size Bell X-1 model miniature from Philip Kaufman's The Right Stuff. Captain Chuck Yeager (Sam Shepard) piloted the Bell X-1 successfully, breaking the sound barrier after many other pilots died attempting the same.Often ranked among the greatest historical films of all time, The Right Stuff was nominated for eight Academy Awards®, including Best Picture, of which it won four. In 2013, the Library of Congress inducted it into the National Film Registry for its impact on American culture. Three sizes of X-1 model were designed based on the real-world X-1 blueprints and hours of NASA footage, then crafted by the model shop team at USFX. This medium-size version, the only one of its scale built for the film, was created for shots requiring wire flying, including the "victory roll" sequence shot with high-speed photography.The miniature features a wooden fuselage hand-painted orange with metal and fibreglass detailing,"Glamorous Glennis" stencilled on one side of the nose cone, and "Bell Aircraft," "6062" and the "star and bar" logo stencilled on both sides. It features a hollow needle nose with a copper pipe interior for threading puppeteering wire through the fuselage, and out the exhaust port. The exterior is intentionally distressed by production with scrapes and scratches to appear exposed to the elements in flight.Following production, this miniature underwent sympathetic repair, including a replacement of its cockpit canopy. However, it retains its original insignia, paint, and other signs of wear and tear from production use. Dimensions: 68.5 cm x 56 cm x 23 cm (27" x 22" x 9")Estimate: £35,000 - 70,000 US View all lots from RIGHT STUFF, THE (1983)Bidding for this lot will end on Thursday, November 9th. The auction will begin at 3:00PM BST and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Friday, November 10th, Saturday, November 11th or Sunday, November 12th.
STAR WARS: ANDOR (TV SERIES, 2022-PRESENT) - Light-up Blue Leader X-Wing Art Department Reference Model MiniatureA light-up reference model miniature X-Wing from the production of the Star Wars TV series Andor. Constructed by concept model maker Alex Hutchings, this model was one of three studio-scale miniatures used as reference on the show. Hutchings painted it in the colours of Blue Leader from the movie Rogue One, and it stayed in the production designer's office, to be used in meetings as a reference.The model is made primarily of resin and plastic, and features a pilot and an R2 unit. It has a battery and switch compartment hidden behind the R2 unit, and the cockpit and engines illuminate when powered with a 10v battery. The model has been intentionally distressed to appear well-used, and sits on a display stand. Dimensions (model): 55 cm x 45 cm x 19 cm (21 3/4" x 17 3/4" x 7 1/2")Contains electronics; see electronics notice in the Buyer's Guide.Estimate: £8,000 - 16,000 M View all lots from STAR WARS: ANDOR (TV SERIES, 2022-)View all lots from STAR WARS - ALL ITEMSBidding for this lot will end on Thursday, November 9th. The auction will begin at 3:00PM BST and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Friday, November 10th, Saturday, November 11th or Sunday, November 12th.
TEAM AMERICA: WORLD POLICE (2004) - Team America Hummer H2 Small-scale Model Miniature with Character FigurinesA Team America Hummer H2 small-scale model miniature with character figurines from Trey Parker's Team America: World Police. Team America chased enemy operatives through the streets of Egypt in their stars-and-stripes-themed Hummer.This small-scale resin, plastic, rubber, and foam Hummer is applied with white vinyl stars and Team America stickers throughout and hand-painted in Team America's signature patriotic red, white, and blue paint theme. It comes affixed with eight rockets labelled "Team America" on top and inset with hand-painted miniature figurines of Chris (Matt Stone) and Joe (Trey Parker) via fastening strips. Internal wiring was cut after production, rendering the top light nonfunctional. The model exhibits chipped paint as well as loose panelling and figurines. Dimensions: 51 cm x 24.25 cm x 23 cm (20" x 9.5" x 9")Contains electronics; see electronics notice in the Buyer's Guide.Contains mechanical components; see notice in the Buyer's Guide.Estimate: £5,000 - 10,000 US View all lots from TEAM AMERICA: WORLD POLICE (2004)Bidding for this lot will end on Thursday, November 9th. The auction will begin at 3:00PM BST and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Friday, November 10th, Saturday, November 11th or Sunday, November 12th.
ALIENS (1986) - Light-up Remote-controlled Photo-matched 1/12th-scale APC Model Miniature and Collection of Production MaterialsA light-up remote-controlled model miniature APC from James Cameron's sci-fi action sequel Aliens. Ripley (Sigourney Weaver) and the Colonial Marines were taken to the colony of Hadley's Hope in an APC (Armoured Personnel Carrier), and used the vehicle to travel to the atmosphere processing station, barely escaping with their lives as they were swarmed by dozens of xenomorphs. It is believed that three mechanised APCs were built for the production at different scales: a full-size APC made from an airport plane tug; a 1/6 scale APC with working lights and a rotating gun turret; and this 1/12 scale model, which was used for the scene where the dropship first deposited the APC onto the surface of LV-426 and for the arial shot as the APC enters the atmosphere processor.The miniature's body comprises a vacuum-formed plastic shell over a balsa wood chassis, with a running gear taken from a radio-controlled car. It was built as lightweight as possible because it had to sit inside the miniature dropship as it descended, and the model unit were wary of damaging the dropship miniature.The model features its original halogen lights on both the front and the back, although one of the front lights no longer illuminates. The strobe light on the top of the APC above the cockpit was removed after production but the wiring is still present. The gun turret can be manually positioned to rotate or moved to the back of the vehicle, as it does in the film when moving through low doors, and mounting holes for its alternative positions are present. The miniature is fully remote-controlled and can reach speeds of 20mph. It is accompanied by the original remote-control unit. There is a switch on the underside of the model to activate the electronics.The APC has undergone some sympathetic restoration since the production wrapped, including the replacement of one of the cannon barrels and some of the wheel cover tabs; these are a different colour to the original components to highlight their replacement. The tyres are production-made back-ups as the originals degraded since production. The APC is accompanied by four spare, production-made tyres and four brass hubcaps, which were originally conceived to be part of the model but were deemed too heavy for use. Also included are four modern tyres, carefully cast from a production original, which can be swapped in to drive the APC and avoid damage to the originals.A miniature light and grill are also present; these appeared in the film on the two larger APC models, but not on this one. They were originally affixed to its top - the registration points can still be seen - but were removed to allow greater clearance as it left the dropship. The lot also includes a 106-page final-draft script dated "September 1985" and featuring a crew member's name handwritten on the card cover; 12 miniature floor tiles for the USS Sulaco and elevator miniature sets; a "Bug Stomper" crew jumper (size "M") and jacket (size "L"); 30 previously unpublished behind-the-scenes photographs of this and the other APC and dropship miniatures, including one photograph which this model photo-matches to; five call sheets; eight shooting schedules; a 15-page list of "Special Photographic Effects"; four pages of simple storyboards attached to a notes page; a production memo; and printed concept drawings of both the dropship and the APC. The crew items have some minor staining from age and use. The lot is also accompanied by a letter of authenticity from a senior special effects technician on the production who has reviewed and authenticated the APC. Dimensions: 62 cm x 23 cm x 39 cm (24 1/2" x 9" x 15 1/4") Contains electronics; see electronics notice in the Buyer's Guide.Special shipping required; see special shipping notice in the Buyer's Guide.Contains mechanical components; see mechanical notice in the Buyer's Guide.Estimate: £150,000 - 300,000 M View all lots from ALIENS (1986)View all lots from ALIEN - ALL ITEMSBidding for this lot will end on Thursday, November 9th. The auction will begin at 3:00PM BST and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Friday, November 10th, Saturday, November 11th or Sunday, November 12th.
STAR WARS: VARIOUS PRODUCTIONS - Anthony Daniels Collection: 1:100 C-3P0 ANA Model Jet, 1:200 R2-D2 and C-3PO ANA Model Jets, and Promotional Launch EphemeraA 1:100 scale C-3PO ANA model jet, 1:200 R2-D2 and C-3PO ANA model jets and promotional launch ephemera for the C-3PO inspired Boeing 777-200, launched by ANA Airlines promoting the release of J.J. Abrams' Star Wars: The Rise of Skywalker.The 1:100 scale and 1:200 scale models included are made of plastic and come with display stands and plaques. The accompanying assorted C-3PO promotional launch ephemera includes a stewardess apron, chair back covers, card cups, 27 boarding certificate cards, 20 postcards, a C-3PO ANA jet pin and an ANA key ring. Dimensions (boxed 1:100 model): 83 cm x 16 cm x 23 cm (32 3/4" x 6 1/4" x 9") (each boxed 1:200 model): 35.5 cm x 6 cm x 15 cm (14" x 2 1/2" x 6")Estimate: £300 - 600 M View all lots from STAR WARS: VARIOUS PRODUCTIONSView all lots from STAR WARS - ALL ITEMSBidding for this lot will end on Friday, November 10th. The auction will begin at 3:00PM BST and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Thursday, November 9th, Saturday, November 11th or Sunday, November 12th.
ALIENS (1986) - Collection of Floor TilesA collection of floor tiles from James Cameron's sci-fi sequel Aliens. This style of floor tile can be seen in the USS Sulaco hangar bay and in the elevator that Ripley (Sigourney Weaver) used to rescue Newt (Carrie Henn). Different sizes were used across a number of miniature sets and forced perspectives.This collection comprises 10 1:4 scale silver-painted resin tiles and 15 1:12 scale silver-toned plastic tiles with the same crosshatch design. The tiles exhibit pant wear and dust from production use and storage. Dimensions (large): 10.5 cm x 10.5 cm x 1 cm (4 1/4" x 4 1/4" x 1/2"); (small): 3.5 cm x 3.5 cm x 0.5 cm (1 1/2" x 1 1/2" x 1/4")Estimate: £1,000 - 2,000 M View all lots from ALIENS (1986)View all lots from ALIEN - ALL ITEMSBidding for this lot will end on Saturday, November 11th. The auction will begin at 3:00PM BST and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Thursday, November 9th, Friday, November 10th or Sunday, November 12th.
APOLLO 13 (1995) - Command Module Reference ModelA Command Module reference model from the production of Ron Howard's Apollo 13. In the climactic finale, the crew of Apollo 13 crashed back to Earth in their Command and Service Module. Created as a reference for the quarter-scale Module miniature used in the finale by Robert Legato's Digital Domain effects team, this cast resin model is hand-painted grey with black striping, red detailing, and panels hand-numbered and lettered in black ink. Also included is a clear acrylic display base. The model exhibits flaking paint, exposed resin, and lifting to its base plate from use and age. Dimensions: 15.25 cm x 15.25 cm x 15.25 cm (6" x 6" x 6")Estimate: £1,000 - 2,000 Ω View all lots from APOLLO 13 (1995)Bidding for this lot will end on Saturday, November 11th. The auction will begin at 3:00PM BST and lots are sold sequentially via live auctioneer; tune in to the live streaming broadcast on auction day to follow the pace. Note other lots in the auction may close on Thursday, November 9th, Friday, November 10th or Sunday, November 12th.
Staffordshire.- Saxton (Christopher) Staffordiae Comitatu pfecte et absolute elaboratu haec tibi tabula exhibit, county map with strapwork title cartouche upper left, royal arms of Elizabeth I upper right, arms of Thomas Seckford lower right, large compasses and scale lower left, engraved map by Francis Scatter, with original hand-colouring, 390 x 510 mm (15 1/8 x 20 in), under glass, two large repairs to loss within the green pigment at centre right and lower centre, some careful pen facsimile additions to both, minor surface dirt, framed, [1579].
Wiltshire.- Andrews (John) and Andrew Dury. A Topographical Map of the County of Wilts, Describing the Seats of the Nobility and Gentry, Turnpike and Cross Roads, Canals, &c., Surveyed Originally in 1773..., Second edition, large scale county map in six horizontal sections, calligraphic title, large vignette after Cipriani in the lower left, table of the market towns and villages, separate engraved general index map, engravings with outline hand-colouring, each map section approx.480 x 1925 mm (18 7/8 x 75 3/4 in), dissected and mounted on linen, edged with green-coloured linen, some offsetting, minor toning, a few splits to folds on the general index map sheet, folding with blue end-panels, modern slipcase, 4to, William Faden, 1810.
Dugdale (Sir William) Monasticon Anglicanum, 3 vol., first editions, additional engraved architectural title to vol. 1, titles printed in red & black, 100 engraved plates only by Wenceslaus Hollar (of 120), some reinforced at hinges, occasional contemporary manuscript side-notes, some finger-soiling, modern half calf, corners rubbed, spines gilt with black morocco labels, [Wing D2483-5-6], folio, Richard Hodgkinsonne, 1655-61-73; sold not subject to return.⁂ The Monasticon Anglicanum revealed the importance of charters as sources for the study of medieval history, and 'established for the first time since the Reformation the importance of monasteries and the scale of their territorial possessions' (ODNB).
Harrison Fisher and Co, Sheffield, three blades, nail file, mother of pearl scales, work back, brass linings, 8cm. Marples and Gillott Ltd, Sheffield, two blades, file, mother of pearl scale 8cm. John Watts, Sheffield one blade, n/s bolster, brass bolster, scales, mother of pearl scales, 8cm. (3).
A Chinese Export Spanish Colonial 'Royal Court of Mines' Armorial plate and a jug, circa 1792, painted after a commemorative medal produced by Jerónimo Antonio Gil for the accession of Carlos IV to the Spanish throne, brightly enamelled with the Royal Arms of Spain surmounted by crown, the Latin inscription roughly translated to 'The Royal Court of Mining of New Spain expresses its fidelity with this monument executed in Mexico in 1789', the plate 22.5cm diameter and the jug 14cm high (2) The commissioning of this service by the 'Royal Court of Mines' shows how important mining was to the Spanish Empire. By 1800 silver mines in 'New Mexico' produced almost two thirds of the worlds output. The history of the 'Palace of Mines' dates to the late 18th century and in 1793 the Royal College of Mines of 'New Spain' acquired the land where the building still stands today in Mexico City.清十八世紀 外銷徽章紋杯及盤一組兩件 Condition Report: the plate in very presentable condition with minor wear and two very small scale chips to underside of rim the jug lacking cover and with minor fritting and minor wear and firing blemishes Condition Report Disclaimer
Four Jo-Han (Detroit - USA) 1:25th scale plastic model kits comprising of #C-5100 Plymouth police emergency wagon, (loose parts off sprues), #C-5070 '70 Oldsmobile hardtop (sealed box), #C-4062 '62 Chrysler 300 hardtop (loose parts off sprues), #C-2268 68 Chrysler 300 convertible (loose parts off sprues) unchecked for completeness of all parts, boxed.
A Scale Model of the Offshore Supply Ship "Forties Shore", fitted with electric motor, plus servo's, fair build, but currently in playworn condition, model length 30 inch. Plus a job lot of railway items, consisting of a Tri-ang Class 31 Diesel Locomotive, two 'N' Gauge U.S.A Outline Diesel Locomotives, ten 'N' Gauge items of rolling stock, a small amount of 'OO' Gauge and 'N' Gauge track, "OO" Platform Sections, Dublo Signal Box, etc. All playworn, locomotives U/T:- One Box
-
186094 item(s)/page