A fantastic contemporary replica of the iconic British Red Telephone Box. Incredibly well made replica from fibreglass, wood, and metal. Opening door to front, with ' Telephone ' signs to top. Fabulous 1/1 scale replica exhibition / events / advertising display prop. Measures approx 230cm tall. As new. Rare.
We found 186094 price guide item(s) matching your search
There are 186094 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
186094 item(s)/page
Corgi Aviation Archive Die Cast Model Avro Lancaster R5868/'PO S 467 Squadron 1:72 Scale fantastic Die cast model for the adult collector in original box unused. Good Condition. All autographs are genuine hand signed and come with a Certificate of Authenticity. We combine postage on multiple winning lots and can ship worldwide. UK postage from £4.99, EU from £6.99, Rest of World from £8.99.
A Chinese Qianlong Period Ivory Lantern Shaped Inro. Inro type case with detachable chambers with attached seals / chops, carved to the body with a Luohan with a studant and the celesteral city amongst floating clouds with an incised fish scale ocean sea, bordered by a Greek key fret motifs, the seal stopper carved as a crouching eagle bird, circa 1760 / 80s, height 7 1/4 cm, please see accompanying image.
A Jichimu scale box19th centuryThe rectangular box fitted with two drawers originally to house a scale and weights, and fitted with copper drawer pulls, cloud-shaped corner brackets and hardware, the wood finely figured and of a rich, dark tone.4 7/8 x 17 3/4 x 7 7/8in (12.3 x 45.1 x 19.8cm)
A 1" Scale (1/12th) Model Coal-fired Traction Engine to the 'Minnie' design, made essentially to the designs published in 'Model Engineer' circa 1970, the valve chest inscribed 'Minnie 1977-1981', and finished to a very high standard with additional detailing. The engine a double-acting single cylinder with slide valve, lever reversing from the footplate, with water gauge, pressure gauge, 2-speed gears, mechanical lubricator, contracting drum brake to off side wheel and winch drum behind nearside wheel, polished brass hub caps and bearing oiler caps, worm steering, operating ashpan damper and crankshaft-driven water pump, finely finished in yellow-lined maroon with lined vermilion wheels and details and grey wheel treads, VG-E, never fired, rear nearside wheel loose on axle, no boiler history
A 1" Scale (1/12th) Gas-fired Model Traction Engine by Maxwell Hemmens, to a generally similar specification as the Model Engineer 'Minnie' engine, and finished to a commercial standard in yellow-lined dark green. The engine a double-acting single cylinder with slide valve, lever reversing from the footplate, with water gauge, pressure gauge, 2-speed gears, mechanical lubricator, contracting drum brake to off side wheel, polished brass hub caps, worm steering, operating ashpan damper and crankshaft-driven water pump, fitted with gas burner but without pipework or gas tank, VG-E, lightly used, motion turns smoothly with some slack in reversing links, no boiler history
A Group of Beeson-made Locomotive Wheels in 7mm and 4mm Scales, most in the larger size, including 3 pairs 45mm driving wheels on sleeved axles with crankpins and balance weights, 3 pairs 29mm carrying wheels on axles, loose wheels including two LNWR-type 30mm drivers, one 54mm for Midland 'Spinner' or similar and four others, together with three odd 4mm scale wheels, all VG, finished to a very high standard, unpainted (qty as listed)
A Group of Beeson-made Boiler Fittings and Buffers in 7mm and 4mm Scales, mostly 7mm, including GWR chimney and top-feed unit, LNWR square-based chimneys (4), MR Johnson safety-valve bonnet, various other chimneys and domes (approx 24 in 7mm and 7 in 4mm scale), together with a small assortment of buffers including one pair ready-painted for Caledonian Railway, other odd buffers, pair of screw couplings, and four in 4mm scale, all beautifully finished, VG-E (qty as listed)
A Collection of Etched Brass Name and Numberplates in Various Scales by JS Beeson, mostly in 7mm scale, some in packeted sets including LNWR 3020 'Cornwall', 618 'Princess Alexandra', 66 'Experiment', 2061 'Harpy', 503 'Dreadnought', South Western Railway no 702, together with an assortment of other plates including larger-scale 'Rainhill' (pr), LNWR 5000 (pr), 'LMS Derby 1928' (pr) and many others from LNWR, LMS, GWR and other subjects, a few uncut from sheets, and a cabside number stencil for LMS no 6234, all G-VG (qty)
Unboxed Hornby and Other O Gauge Trains, six early Hornby wagons comprising 'Nut-and-bolt' MR open wagon and LNW brake van, both F-G, 'OAG' Pratt's tank wagon, blue McAlpine side-tipper, LMS and LNER bolster wagons, all G-VG, a post-war green MO locomotive and part of another, both working but lack tenders, a Bing carriage truck, G, with 4 Hornby and 3 Lionel wagons overpainted in 'WD' khaki, all P-F, large-scale lead milk churns, various wagon loads and other items (qty)
A Repainted Bassett-Lowke O Gauge Live Steam 'Mogul' Locomotive and Tender, repainted in BR gloss black as no 42947 with late totem, number and lining neatly hand-painted, with original vapourising burner, whistle, lubricator to smokebox, safety valve and dome cover, overall as repaint G, couplers replaced with 'scale' type (2)
A Large Collection of Soldering and Finishing Tools with Paint Transfers and Other Materials, the majority not gauge-specific, includes several electric soldering irons with many alternative bits and stands, assortment of solder reels, tins/bottles of various fluxes, together with a large box of lining and other transfers (mostly 7mm scale), Humbrol, Railmatch and other paint tinlets (approx 20+ appear unopened), a Dremel rotary tool with several attachments, sculpting knife set and 'Master' lining pen (appears unused), varying F-VG
Bing and Bassett-Lowke Gauge I Tinplate Passenger and Freight Stock, two Bing 4-wheel LNWR coaches, comprising a 1st/3rd coach with replacement roof and full brake van, both in brown/ivory, together with a GW vent van in grey with replacement roof and a heavily re-touched GW Mica B refrigerator van, most with replacement couplings and (scale) wheels, P-G (4)
Two Uncommon Bassett-Lowke Gauge I Printed Wood Open Wagons, comprising Caledonian open wagon no 73302 in red-brown livery, G-VG, one coupler replaced, removable modern load inside, together with grey GWR open wagon no 34004 with GW 1922 tarpaulin cover, also G-VG, wheels replaced with coarse-scale plastic type (2)
The following 121 lots of Gauge I Locomotives and Rolling Stock were intended for use on a Garden railway using Battery power, many built by the vendor, Jim Wheaton, to an excellent standard from brass kits with Bühler motors or similar, which, from a random sample tested, appear to operate on 6-12 volts DC. Most of the locomotive samples tested have insulated wheels and would be suitable for 2-rail conversion, though there do appear to be some exceptions. All have been in storage for some time, consequently the effectiveness of rechargeable batteries (where fitted) is not assured. Practically all have cab detailing and footplate crews, some of which have become detached in shipment. All are subject to Import VAT at 20% of the Hammer Price. A Gauge I Finescale Battery-electric Midland Railway 4-4-0 Locomotive and Tender by Cherry Scale Models of Langham, beautifully finished and lined in MR crimson lake livery as no 1757 'Beatrice', Cherry's model no 55 with plaque under footplate, arranged for battery pack in tender, E, in bespoke wooden carrying case THIS LOT ATTRACTS IMPORT VAT AT 20% OF THE HAMMER PRICE
A Gauge I Finescale Battery-electric Ex-SR 4-6-2 'Merchant Navy' Class Locomotive and Tender, an 'unrebuilt' example, finely made by Cherry Scale Models (No 17), and finished in BR green livery as no 35028 'Clan Line', with late totem, arranged for radio-controlled operation with built in rechargeable battery pack, VG-E, minor damage to front buffer beam, one footstep and one vacuum pipe detached, in bespoke wooden carrying case THIS LOT ATTRACTS IMPORT VAT AT 20% OF THE HAMMER PRICE
A Gauge I Finescale Midland Railway Clerestory-roof Brake/1st/3rd Composite Coach by Lawrence Scale Models, finished in MR lined crimson lake livery as no 3301, with interior detailing, plaque to underside indicates completion 30/1/95, VG-E, faint rusting to wheel treads, THIS LOT ATTRACTS IMPORT VAT AT 20% OF THE HAMMER PRICE
A Gauge I Finescale LMS Brake/1st Coach by Lawrence Scale Models, finished by D Studley in LMS lined crimson lake livery as no 18503, with interior detailing, plaque to underside indicates completion 19/1/95, VG-E, faint rusting to wheel treads, THIS LOT ATTRACTS IMPORT VAT AT 20% OF THE HAMMER PRICE
Five Gauge I Finescale Oil Tankers by SanCheng for Fine Scale Brass/Tower Brass, all in weathered state, comprising two in Shell/BP black, two Esso black, and one Admiralty Naval Store Dept, all VG-E, fitted with 3-link couplers, in original boxes (5) THIS LOT ATTRACTS IMPORT VAT AT 20% OF THE HAMMER PRICE
Five Gauge I Finescale Oil Tankers by SanCheng for Fine Scale Brass/Tower Brass, all in weathered state, comprising two in Shell/BP black, one Esso black and one yellow, and one Admiralty Naval Store Dept, all VG-E, fitted with 3-link couplers, in original boxes (5) THIS LOT ATTRACTS IMPORT VAT AT 20% OF THE HAMMER PRICE
A Berlyn Locomotive Works 'Premier Series' G Scale 4-6-0 Locomotive and Tender, class T-19, solidly built in brass and finished in Rio Grande Southern black with green boiler as no 20, appears fitted with sound (with user's manual), E, complete with builders plaque dated 2000 in original box, box VG, THIS LOT ATTRACTS IMPORT VAT AT 20% OF THE HAMMER PRICE
An Accucraft Trains G Scale 2-8-0 Locomotive and Tender, ref AL88 - 119A, with serial no 015, solidly built and finished in DSP&P black/brown as no 191, G-VG, evidence of fatigue to left side of die-cast gear case, otherwise unused, complete with instructions and carrying frame in original boxes, boxes VG (2) THIS LOT ATTRACTS IMPORT VAT AT 20% OF THE HAMMER PRICE
An Accucraft Trains 'Silver Stream' Series G Scale 2-8-2 'Mudhen' Locomotive and Tender, solidly built and finished in Rio Grande black/silver as no 463, VG, never more than test-run, complete with carrying frame in original boxes with instructions, boxes VG, together with a boxed Accucraft 11-720 'Mudhen' Snowplough, VG-E, and two LGB containers, all within the tender box (2+ items inside) THIS LOT ATTRACTS IMPORT VAT AT 20% OF THE HAMMER PRICE
An Accucraft Trains G Scale 2-8-0 Locomotive and Tender, limited edition no 076/100, solidly built and finished in D&RGW yellow/black/silver as no 268, VG, never more than test-run, one small plate detached from tender, in metal carrying case with instructions, case VG, THIS LOT ATTRACTS IMPORT VAT AT 20% OF THE HAMMER PRICE
American G Scale Narrow Gauge Rolling Stock by Bachmann AMS and Others, comprising Bachmann Spectrum 88397 D&RGW flat car, 98490 log car, an AMS 40' Steel Reefer and short Flat Car, and an Aristocraft caboose in Shelter Bay brown, all VG-E, in original boxes, boxes VG (5) THIS LOT ATTRACTS IMPORT VAT AT 20% OF THE HAMMER PRICE
An Unpowered Approx 1" Scale Tasker Steam Wagon Model, with a dummy boiler, nicely-finished wheels, cab and body with considerable rivet and other detail, worm-operated steering, single-cylinder double-acting engine unit appears probably commercially-made (or from kit), with piston valve and pipe attachment to operate from compressed air or external steam source, painted in black and maroon, 'Tasker' to front of smokebox and 'D Russell' to cab side plates, F-G, steering chains need attention
A Markie Models 1" Scale Live Steam Traction Engine, finished in crimson and black, with single cylinder, slide valve, solid flywheel 3½" diameter, steam regulator, water and pressure gauges, spirit tank with flow valve and burner, and with a loose-fitting canopy (possibly home-made), overall G, very dusty, split to front offside 'tyre', no boiler certificate
A Maxitrak ¾" Scale Live Steam Gas-fired Allchin Traction Engine, in crimson and black with brass trim, serial no 094, featuring single double-acting cylinder with lever reversing, pressure and water gauges, fitted gas tank with regulator, complete in wooden case with filling syringes, tools, instructions and maker's certificates for boiler and gas tank, both dated 15.2.16, E, never steamed
A Model Live Steam Traction Engine 'Old Timer' by Mercer (DRM) of Birmingham, to approx ¾" scale and finished in black/brass, featuring single double-acting cylinder with adjustable link motion, regulator and gear engagement all controlled from footplate, with pressure gauge, lubricator, and straked rear wheels, fitted with a gas-firing burner and gas tank, lot includes the original spirit burner and funnel, and instructions for the engine as supplied and for the gas burner, overall VG-E, appears never steamed, steering chains need adjustment, no boiler or gas tank certificate
A 1" Scale (1/12th) Model Tangye Twin-Cylinder Mill Engine, the two approx 1" x 1½" cylinders mounted on handed cast frames, in turn onto a solid cast base and hardwood plinth, the cylinders driving via external disc cranks (set at 90°) to a central 5½" diameter flywheel, with oilpots to each cylinder and slidebars, and twin (independent) functional Watt-type governors, the castings finished in dark green, with an engraved plaque, the design dating from 1895, model believed scratch-built in the 1950s, G-VG, some paint loss to castings, slight surface rusting to cylinder covers
-
186094 item(s)/page