There are 1087811 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribeA gold diamond cluster ring, with three baguette cut diamonds in portrait and landscape orientation, rub set to the centre, to surround of brilliant cut diamonds, grain set to a scalloped edge, to tapered shoulders and a plain shank, tested as approximately 18ct gold, cluster 9.4 x 13.7mm, 4.96g.Finger size L¼Condition report: Surface marks/scratches to mount.Slight wear to setting edges.Shank slightly thinner at base.
A gold diamond daisy cluster ring, with seven brilliant cut diamonds, with a stated total weight of 0.50ct, all set to tapered shoulders and a flat section shank, marked 9k, tested as approximately 9ct gold, cluster 7.8mm diameter, 2.29g.Finger size QCondition report: Surface reaching inclusions to some of the diamonds.Some very minor surface marks/scratches to mount.
A diamond cluster ring, a brilliant cut diamond claw set to the centre, to surround of off-set curved collets, with eight cut diamonds grain set to scalloped edges, with wire basket, the white head to yellow solid tapered shoulders and a plain shank, tested as approximately platinum and 18ct gold, head approximately 15mm diameter, 3.66g.Finger size O-P approximatelyCondition report: Shank slightly oval. Head and shank not entirely aligne with each other, the head is at an angle.Surface reaching inclusions to the centre diamond.Surface marks/scratches to mount.Some wear to the gallery, and to two wires in particular.Head of ring a little dirty, would benefit from being cleaned.
A gold diamond cluster ring, with a brilliant cut diamond claw set to the centre, to tiered rows of eight cut diamonds, all claw set, with open shoulders and a flat section shank, tested as approximately 14ct gold, 2.27g.Finger size P¼Condition report: Surface reaching inclusions to some of the diamonds.Minor surface marks/scratches to mount.Solder join visible at base of shank.
A platinum diamond cluster ring, a brilliant cut diamond, with two smaller brilliant cut diamonds at each side, all rub set, to outer border of brilliant cut diamonds, semi-rub and grain set, with a total stated diamond weight of 1.01ct, to tapered shoulders and a 'D' section shank, marked PT950, tested as approximately platinum, 6.10g.Finger size N½ Condition report: Jewellers unsold stock, no damage or repairs.Some very minor surface marks/scratches to the shank.
A white gold diamond daisy cluster pendant, with seven brilliant cut diamonds, with a stated total weight of 0.50ct, all set to an articulated 'V' shaped bale, suspended on a filed curb link chain with bolt ring clasp, tested as approximately 9ct gold, pendant 15mm long, chain 460mm long, 1.26gCondition report: Surface reaching inclusions to some of the diamonds.
A white gold diamond and fancy coloured diamond pendant, a brilliant cut diamond daisy cluster to the centre, to lobed collets each grain set with black, blue, yellow, orange or green fancy coloured diamonds, treated, to articulated 'V' bale, suspended from a curb link chain with bolt ring clasp, marked 375, pendant 17mm long, chain 460mm long, 1.84gCondition report: Jewellers unsold stock, no damage or repairs.
A white gold diamond pendant, the openwork circular pendant channel set with baguette and tapered baguette cut diamonds, to concealed suspension loops, suspended on a filed curb link chain with bolt ring clasp, marked 9k, tested as approximately 9ct gold, pendant 20mm diameter, chain 460mm long, 1.97gCondition report: Surface reaching inclusions to the diamonds.
A white gold diamond pendant, the circular openwork pendant with a row of graduated baguette cut diamonds channel set to the bottom half, with rows of brilliant cut diamonds grain set above and below, to concealed suspension, on a filed curb link chain with bolt ring clasp, marked 9k, pendant 26mm diameter, chain 460m long, 3.90gCondition report: Surface reaching inclusions to the diamonds.
A white gold diamond ring, the tapered slightly concave head, pavé set with eight cut diamonds, with a stated total weight of 1.50ct, to tapered shoulders and a plain shank, tested as approximately 9ct gold, head 17.5mm wide at widest point, 8.05g.Finger size M LECondition report: Surface reaching inclusions to the diamonds.Minor surface marks to mount.
Three gold wedding rings, to include an 18ct gold flat section wedding ring with hand engraved pattern, 6mm wide, London 1887, a 9ct gold wedding ring, 6mm wide, Birmingham 1970, and a 9ct gold wedding ring, 2.6mm wide, London 1945 (3)18ct gold - 3.82g, 9ct gold - 5.62g totalFinger size R½ LE, P, L½Condition report: Surface marks/scratches to all.Wear to engraving of 18ct gold ring.The thinner 9ct gold ring has worn edges, was possibly worn against another ring.
A gold ring, by Georg Jensen, no. 1098, with two hollow lozenges to the head, damaged, to a tapered shank, marked 18k 750, 5.67g.Finger size JCondition report: Surface marks/scratches to gold.Shank thinner at base.Hollow head has worn through in a number of places - one side of the head has worn through, possibly where it has been worn against another ring, and the corners of all the lozenges.
Drei silberne Ringe, 14. - 18. Jhdt. Ein spätbyzantinischer Ring, die kantige Schiene mit Kreisaugendekor. Auf der runden Platte ein graviertes Sternmotiv. Ein Siegelring aus dem 17. Jhdt., auf den Schultern der Schiene halbplastische Engelsköpfe. Die achtkantige Siegelplatte mit Blume und Monogramm „KN“. Ein Bauernring aus niederlötiger Legierung oder Zinn(?) mit rotem Schmuckstein aus Glasfluss. Größe 25 bis 33 mm.Zustand: IIThree silver rings, 14th - 18th century Ein spätbyzantinischer Ring, die kantige Schiene mit Kreisaugendekor. Auf der runden Platte ein graviertes Sternmotiv. Ein Siegelring aus dem 17. Jhdt., auf den Schultern der Schiene halbplastische Engelsköpfe. Die achtkantige Siegelplatte mit Blume und Monogramm „KN“. Ein Bauernring aus niederlötiger Legierung oder Zinn(?) mit rotem Schmuckstein aus Glasfluss. Größe 25 bis 33 mm.Condition: II
Zwei steinerne Mauerhalterungen für Gefangene oder Pferde, 17. Jhdt. Ausdrucksstark geschlagener Türkenkopf mit aufgezwirbeltem Bart und weit aufgerissenen Augen, im Mund ein schmiedeeiserner Ring, der Wandzapfen angesetzt. Länge 33 cm, Gewicht 10,47 kg. Dazu ein ähnlich gearbeiteter Löwenkopf, Länge 30 cm, Gewicht 7,56 kg.Zustand: II -Zwei steinerne Mauerhalterungen für Gefangene oder Pferde, 17. Jhdt. Ausdrucksstark geschlagener Türkenkopf mit aufgezwirbeltem Bart und weit aufgerissenen Augen, im Mund ein schmiedeeiserner Ring, der Wandzapfen angesetzt. Länge 33 cm, Gewicht 10,47 kg. Dazu ein ähnlich gearbeiteter Löwenkopf, Länge 30 cm, Gewicht 7,56 kg.Condition: II -
An 18th Century oak case 30 hour longcase clock the square brass dial engraved “Phil Avenell, Farnham” and with single hand the chapter ring marked with Roman numerals and fleur de lis, with pendulum and key 196.5cms high. Viewing/collection at West Woodlands BA11 5ES. Payment at Standerwick BA11 2QB. No booking required. Lots to be collected within 7 days.
Loading...
