dating: 1794 provenance: Anghiari, Smoothbore, two-stage, 12 mm cal. barrels, octagonal at the first part with Pistoia mark among shamrocks, then round after rings, snaphaunce flintlock with flat lock-plate, pan with sliding pan cover, cock screw with mask in high relief; partially sculpted wooden stocks with beautiful carved iron mounts, counterplates decorated with floral motifs on a granulated background, ring guard decorated en suite, butt-plates with large mask surrounded by small circles. Iron ramrods. For the dynasty of Guardiani gunsmiths see 'Historical repertory of Italian arquebusis' by B. Barbiroli, pp. 305-307. length 25.5 cm.
We found 1087795 price guide item(s) matching your search
There are 1087795 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
1087795 item(s)/page
dating: Early 19th Century provenance: France, Round, smoothbore, 21 mm cal. barrels, with slightly moulded nozzle. Worked in a single piece with boxlock-type frame, engraved with trophies and floral motifs. Cocks, batteries, ring guards, triggers, safety locks and bayonets all made of iron. Micro-checkered butts with filigree inlays. In patina, to be cleaned. length 26 cm.
dating: First half of the 17th Century provenance: Brescia, Smoothbore, octagonal, 12 mm cal. barrel with frames at the edges, signed the base with the signature 'LAZARINO COMINAZZO' of a later period; external wheel lock held by a carved frame, engraved flowers on wheel and plate. On the sides of the wheel there are two large carved cocks, placed on shaped and engraved springs. Wooden full case, folding butt, an opening button on the back. Engraved and partially pierced iron mounts. Nice little ring-guard decorated with floral motifs. Iron-tipped wooden ramrod with iron cartridge extractors. Restorations, defects and small missing parts. Rare. It deserves a proper restoration. length 110 cm.
dating: 1694 provenance: Germany, Octagonal, rifled, 13 mm cal. barrel, frame at the base, later signed and dated 'GOTTFRIED SCHIFFEL 1694', with rear sight and foresight, slightly bell-mouthed nozzle; beautiful lock with semi-internal wheel with frame carved and engraved as a snake, the lock-plate with a beautiful grotesque figure with dragon lower limbs, bow and arrow, tail shaped as a dragon's head; the large cock engraved with flowers, engraved and carved spring and spring cover, pan with pan cover and spark arrester. Lightly carved wooden stock with horn decorations, patchbox. Iron mounts, wing screws for quick girdle, anatomic ring guard, smooth and angled butt-plate equipped with support button. Set trigger. Wooden ramrod. Interesting weapon for hunting in the underwood. length 91.5 cm.
dating: first quarter of the 17th Century provenance: Brescia, Smoothbore, octagonal, 13 mm cal barrel with frame at the edges. Smooth tang. External wheel lock held with a frame a with remains of floral engravings. Two big carved hammers on the sides of the wheel, on shaped and engraved springs. Small floral engravings. Full wooden stock with faceted butt, small geometric carvings. Iron mounts partially carved or engraved with floral motifs, beautiful and richly pierced trigger guard with a carved baluster-shaped end. Complete with iron-tipped, wooden ramrod with iron cartridge extractor. Interesting screws of the lock featuring a piercing and a ring (a missing ring) to remove the lock without a screwdriver. length 122.5 cm.
dating: mid-17th Century provenance: Baltic, Octagonal, 10 mm cal. barrel, slightly bell-mouthed at the muzzle, marked 'W' at the base, provided with adjustable rear sight with carved tang and foresight; angled, smooth tang; beautiful iron wheel battery engraved and carved with floral motifs and animals, snap sliding pan cover, brass button; wooden full case richly decorated with engraved brass inlays, mother-of-pearl and bone (partially green-coloured), horn butt-plate marked 'G. F. W. P. A.', patchbox, anatomical iron ring-guard, set trigger, trigger carved as a leaf, carved-tipped iron rod. Small restorations. length 119 cm.
dating: late 18th Century provenance: Naples, Smoothbore, two-stage, 17 mm cal. barrel, octagonal at the first part with two marks among gold lilies and silver garlands, then round after rings and with swallowtailed silver foresight; smooth tang. Miquelet lock carved and engraved with floral motifs. Wooden full stock with checkered base and hand rest and grooved butt. Beautiful engraved and partially pierced brass mounts, the counterplate with a lion, the ring-guard with a palmette, the three barrel brackets pierced and engraved with floral motifs. Iron ramrod. length 143 cm.
dating: 1840 provenance: Sardinia, Smoothbore, octagonal, 11.5 mm cal. barrel engraved with sun and floral motifs, marked 'P.Bj 199', sun and foresight both of bronze; lock signed 'Barbuti', engraved and carved. Wooden stock mostly covered with steel sheets, richly engraved, carved and partially pierced with floral motifs, the counterplate with two intertwined snakes; typical butt, carved stave on the back. Long iron ring guard engraved with the date '1840'. Iron ramrod with thickened tip. Good-quality. length 143 cm.
dating: Second half of the 18th Century provenance: Bologna, Smoothbore, two-stage, 15 mm cal. barrels, round after rings, the upper one with 'PISTOIA' mark under the gold crown and with foresight; tang with two screws. Very long modern-style lock with oblique edges and carved spring, inside one is signed 'SPIRIDIONE' and the other 'BACULINI' (working mechanism). Beautiful briarwood half case (small lacking parts) sculped with lilies and floral motifs, the butt on the right side with two grooves, only one groove on the opposite side; very fine bronze mounts, engraved and partially pierced with floral motifs, the ring-guard with monogram. Under the butt there is a small rosette containing a needle to clean the vents. Two engraved and pierced barrel brackets. Horn-tipped wooden ramrod with iron cartridge extractors. For Spiridione Baculini see Barbiroli page 77 length 139 cm.
dating: circa 1700 provenance: Bologna, Smoothbore, roundbarrel, 13 mm cal. barrel, with rings and frames and slightly carved at the base, rib on the entire length, moulded muzzle and foresight. Large tang with sight and remains of engraved floral motifs. Rounded plate lock with brass pin provided with a lever on the left side which, with a single rotation (about 250 degrees), cocks the hammer, triggers the bascinet, lowers the batterie and introduces the ball and the powder into the powder chamber. Wooden butt and briarwood fore-end (small defects and missing parts), steel mounts, the counterplate shaped as an 'S', ring-guard carved at the edges and with remains of engraved decorations, the butt-plate can be opened (the opening mechanism needs revision), with powder and ball magazines marked 'P' and 'B', the powder one has a closing screw. Iron-tipped wooden ramrod. Provenance: Collection of the Counts of Stanhope Chevening, Kent.Sotheby's sale on November, 6th 1992.A model with similar butt can be found at the Tojusmuseet, nr. 147 p. 28 plate 30.One of the rare shotguns signed by Giacomo Berselli. The system is often called the Lorenzoni system but it is more likely that the Berselli dynasty invented this revolutionary system. Beautiful model of an Italian repeating gun, provided with a system called 'all back', created and signed by Giacomo Berselli. See several models, both of pistols and guns, provided with this mechanism, in 'I Primi Fucili a Ripetizione' by Gianoberto Lupi, Editoriale Olimpia 1976.For Giacomo Berselli see Barbiroli p. 109/110. length 118.5 cm.
dating: about 1690 provenance: Sezze, Smoothbore barrel, two-stage, 16 mm cal. barrel, octagonal at the first part with a base decorated with a raised frame and engraved floral motifs, then sixteen-faceted (partially with pitting) at the second part and with a muzzle ring equipped with a foresight. Large tang with sight. Rounded plate lock with brass pin provided with a lever on the left side which, with a single rotation (about 250 degrees), cocks the hammer, triggers the bascinet, lowers the batterie and introduces the ball and the powder into the powder chamber. The large tang with broad rear sight, engraved with floral motifs like the butt-plate and the other mounts of the lock, the mount above the pin (and under the cup) signed 'DIAMANTE A SEZZE'; the lever with safety lock; powder gate and ball opening. Briarwood stock and fore-end (with old stock restorations), beautiful iron mounts engraved with floral motifs, partially carved and pierced, some inlaid. The butt plate can be opened with a button, carved and pierced iron barrel bracket. One of the rare signed shotgun of the Berselli / Lorenzoni system with an even rarer signature. The system is often called the Lorenzoni system but it is more likely that the Berselli dynasty invented this revolutionary system. A fine model of an Italian repeating gun, provided with a socalled 'all back' system. See several models both of pistols and guns, provided with this mechanism, in 'I Primi Fucili a Ripetizione' by Gianoberto Lupi, Editoriale Olimpia 1976.For Giacomo Berselli see Barbiroli p. 109/110.For Diamante see Barbiroli, supplementary volume, p. 74. length 142 cm.
dating: late 17th Century provenance: Sedan, Smoothbore, four-stage, 15 mm cal barrel, octagonal at the first part and engraved with a warrior, a trophy and a figure with spears, after a 16-faceted segment decorated with grooves, two round parts divided by a ring and a band of flowers with a small face in the center, front sight; tang with remains of engravings, the rear sight made of two small parts of the stock. Flintlock signed 'PAUL POULCE A SEDAN' (not entirely legible) under the spring, the plate with very fine carvings with a grotesque figure between floral motifs and a mask on the tang, all in bas-relief, the hammer decorated en suite and with screw carved as a lion's head. Wooden full stock, the base with antique breakage and a very fine restoration. Beautiful mounts carved and pierced with masks, grotesque figures and floral motifs. Horn-tipped, wooden ramrod. For Paul Poulce see 'Der Neue Stöckel', vol. II, page 978. The great gunmaker is documented from 1700 to 1720 circa. length 158 cm.
dating: 1780 - 1800 provenance: Madrid, Smoothbore, two-stage, 16.5 mm cal. barrel, octagonal at the first part with gold-inlaid Spanish marks among lilies and under cross, then round after a ring and acanthus leaves with (incomplete) silver swallowtailed foresight; engraved tang; engraved and carved lock provided with a gold-inlaid mark. Full stock (small lacking parts) with grooved butt and iron mounts, the ring-guard signed 'FRAN.CO TARGARONA'. Two pierced barrel brackets. Horn-tipped wooden ramrod with iron cartridge extractors. For Francesco Taragona see 'Der Neue Stöckel', vol. II, p. 1266. The skilled gunsmith became Court gunsmith in 1792. length 123.5 cm.
dating: Early 19th Century provenance: London, Smoothbore, two-stage barrel, octagonal at the first part with frame engraved at the base marked 'LONDON' and with two marks of the test bench in the lower part, then round after a large ring with a circular bell-mouthed nozzle decorated with two thin rings. Engraved tang. Flintlock signed 'TWIGG', engraved en suite and with anti-friction, sealing systems and safety lock. Wooden full stock, checkered at the base and with engraved iron mounts, the ring guard and the butt-plate with Union Jack. Brass-tipped wooden ramrod. length 75 cm.
dating: circa 1800 provenance: London, Smoothbore, two-stage, 11 mm cal. barrel, twisted and finished, octagonal at the first part with engraved frame at the base followed by the signature 'W. PARKER GUNMAKER LONDON', then round after rings and provided with foresight; elegant lock signed 'PARKER', finely engraved with a snake and with a lowered edge engraved with sun and geometric motifs, the cock decorated with floral motifs; pan with magazine provided with lid and sealing batterie, placed on the steel pin and held by a brass mount on the barrel side provided with an opening for bullets and powder decorated with the figure of the wind and floral motifs, finely held by the tang engraved with sun rays and floral motifs at the rear, provided with a small lid engraved and numbered '2' for the mount of bullets which can be opened by a tiny side button; the lower part of the pin is held by an iron mount containig the trigger and the ring-guard which is engraved with a hound with birds. Loading lever on the left side, which cocks the hammer with a single rotation (of about 250 degrees), triggers the bascinet, lowers the batterie and introduces the ball and the powder into the powder chamber, the pin cover on this side is finely engraved with floral motifs. Indian walnut wooden stock (small restoration dating back to the time of use), checkered on the back, small lateral iron gate engraved and covered with a brass frame to load the powder, iron butt-plate engraved with hound and floral motifs. Below siver medallion with monogram 'ANG' and number '2'. Provenance: The Visser Collection, Sotheby's Part II, 3 June 1991, lot 83.Literature: 'Pistols of the World' by Claude Blair, pages 54/55, plates 490/494'Feuerwaffen II', Arne Hoff, Braunschweig 1969, pages 286-294. length 114 cm.
dating: Mid 19th Century provenance: Birmingham, Smoothbore, three-stage, 18 mm cal barrel, octagonal at the first part and signed 'WARD & SONS FINE TWIST', then round after a sixteen-sided segment and a ring, with front sight, marks of the Birmingham test bench and '12'; engraved tang. Half wooden stock with checkered palm rest and handle; engraved iron mounts. Wooden ramrod with metal mounts. length 123.5 cm.
dating: Mid 19th Century provenance: Pistoia, Smoothbore, two-stage, browned, 18 mm cal. barrel, engraved with floral motifs at the base, octagonal at the first part with two gold-inlaid marks among three lilies by a gunsmith from Pistoia (Tuscany, Italy), then round after smooth rings and a beaded one, with silver swallowtailed foresight; engraved tang; backward spring lock engraved with floral motifs. Half stock with checkered, fishbone hand rest and base, butt finely sculpted with a dragon in the lower part and with a trophy on the left side, iron mounts decorated en suite, the butt plate with closed magazine and opening button. Press secure-lock behind the ring-guard. Brass-tipped ramrod with iron cartridge extractor, silver barrel bracket. length 82 cm.
dating: provenance: USA, Group of four rifled 32RF cal barrels, browned and marked 'ELLIOTS PATENTS MAY 29 1860 -OCT. 1. 1861' on the right and and 'MANUFACTURED BY E.REMINGTON & SONS. ILION. N.Y.' on the right, serial number '1.xxx' ( the second number is not clearly legible), with front sight, cal; smooth frame, ring trigger, ebony grips. Working mechanism. length 13.5 cm.
dating: 18th Century provenance: Germany or Austria, Round, smoothbore, revolving, 7 mm cal. barrel, with raised ring at the base, rear sight and foresight; wooden full stock and fore-end, slightly sculpted with floral motifs and with wooden ring-guard, two mother-of-pearl inlaid decorations shaped as a sun. Iron mounts engraved with floral motifs. At the bottom of the butt pin to load the air magazine. Trigger and set trigger. length 115 cm.
dating: Mid 19th Century provenance: Suhl, Smoothbore, round, 15 mm cal. barrels of fine damask, engraved at the base, rib marked 'I. V. FUNK & SÖHNE IN SUHL' in gold, silver foresight, below marked with serial number '5977', 'SUHL' and with marks; long tang finely engraved and with sight. Backward spring locks decorated with partially gilded and silver-plated hunting scene among floral motifs. Wooden butt checkered at the herringbone base, iron mounts decorated en suite, the tang of the ring-guard is made of sculpted wood. Iron-tipped wooden ramrod with iron cartridge extractors. length 123.5
dating: about 1880 provenance: USA, Round, rifled barrel (barely visible rifling, pitting), with address and patents, adjustable rear sight and front sight, marks of the London test bench and marked '44 W. C. F.' at the base; smooth frame with mark of the London test bench; serial number '403xxxB', tang with model; saddle ring. Wooden butt (small restoration) and fore-end. length 98.5 cm.
dating: 16th/17th Century provenance: Italy, Smoothbore, three-stage, iron barrel, carved with irregular patterns in bas-relief on a granulated background at the first part, smooth at the central part with a ring at the edges; bell-mouthed nozzle carved as a monster's head and engraved with stars. Folded tang. Enlarged vent converted to percussion. length 66 cm.
dating: 1897 provenance: Denmark, Round, rifled, 8 x 58R cal. barrel, marked 479xx', ring nut with foresight and club guide for the bayonet, adjustable rear sight with same serial number and '99' under crown; bolt with model inscription 'M. 89,' 'GEVAERFABRIKEN KJOBENHAVN 1897' and same serial number. Long, wooden stock, at the right butt brass medallion marked '9R 4327,' iron mounts. length 133
dating: 18th Century provenance: England, Round, smoothbore, 18 mm cal. barrel, with ring at the base and various English marks including 'RW' and '16' under crown, foresight; tang marked 'CION 27'; lock marked 'Y2' under crown and 'TOWER'; full wooden stock (restorations) with brass mounts, iron ramrod. length 143 cm.
dating: about 1880 provenance: Kingdom of Italy, Round, rifled, 17 mm cal. barrel, with various marks and 'PORRO MILANO N11,' with foldaway rear sight, foresight and clutch for the bayonet, nozzle with ring nut; sliding-revolving bolt, the trigger mechanism needs revision. PA' marking; full wooden stock with restorations, iron mounts and ramrod. length 126.5 cm.
dating: Mid 19th Century provenance: Brescia, Smoothbore, round, 18 mm cal. barrel, with octagonal base marked 'MF' and with another unreadable mark, ring nut with foresight and clutch for the bayonet; tang with rear sight; backward spring lock marked 'BORDONI BRESCIA.' Full wooden stock with brass and iron mounts, iron ramrod. length 108 cm.
dating: about 1870 provenance: Kingdom of Italy, Round, rifled, 18 mm cal. barrel, (clean bore, clearly visible rifling), with serial number '23xx,' with adjustable rear sight, nozzle with ring nut provided with clutch for the bayonet (marked 1124 and with various marks) and foresight; bolt with various marks, the mechanism needs revision. Full wooden stock with brass mounts and iron ramrod. length 109 cm.
dating: Mid 19th Century provenance: Turin, Round, smoothbore, 17.5 mm cal barrel with octagonal base marked 'B.no' and 'C.P', with clutch for the bayonet and front sight; tang provided with rear sight. Lock with remains of the Turin manufacture marks under Savoy mark. Wooden full stock with iron mounts and brass trigger guard. Hilt with saddle ring on the left side. The spring of the first barrel bracket is missing. Butt-plate marked '5685' and with another mark.Iron ramrod and socket bayonet. length 114 cm.
dating: first quarter of the 19th Century provenance: Turin, Round, smoothbore, 17 mm cal. barrel, octagonal at the base marked 'CT', 'Bno', 'F' and 'P', foresight on ring nut marked '03', clutch for the bayonet; tang with model. Lock marked 'R.a Manif.a di Torino' in italics, brass pan. Wooden full stock with stamps on the grip scales, mounts, ramrod and iron socket bayonet. Some marks, the butt-plate with remains of marking. White leather strap. length 110 cm.
dating: 1819 provenance: Turin, Smoothbore, round, 17,5 mm cal. barrel, with octagonal base, marked '1819,' 'F,' 'P,' with Savoia mark and another mark, foresight at the ring nut, clutch for the bayonet; tang with model. Lock signed 'R.a Manif.a of Turin' in italics. Brass tang. Full wooden stock with various stamps 'CP,' '47,' 'BI,' and others. Iron mounts, ramrod and socket bayonet with various marks. White leather strap, probably of later period. length 149.5 cm.
dating: about 1820 provenance: Sardinian Kingdom, Smoothbore, round, 17 mm cal. barrel, octagonal at the base provided with Piedmontese marks, barrel bracket with foresight; flintlock marked 'FABB.A R.A IN TORINO,' brass pan. Wooden full stock with iron mounts and ramrod. Butt plate marked '653' and with a mark. The counterplate part with a long shaft and saddle ring. length 108 cm.
dating: Third quarter of the 19th Century provenance: USA, Round, rifled, 52 cal barrel, with remains of the marks 'SHARPS RIFLE MANUFG CO HARTFORD CONN.' and 'NEW MODEL 1863'. Refreshed browning. Foldable and adjustable rear sight. Breech loading frame marked with Sharps patents of 1848 and 1852 and Lawrence of 1859. Tang with serial number 'C 29xx'. Wooden butt and fore end with iron mounts, guide for the saddle ring (missing), opening and loading lever on the trigger guard. Working mechanism. length 99 cm.
dating: Third quarter of the 19th Century provenance: USA, Round, rifled, 44 centerfire cal barrel (visible rifling, with light pitting), marked with the address and patent, provided with rear sight and front sight. Brass frame, serial number "84xxx" and marks "C" and "S" behind the lever. Wooden butt-stock (few woodworm holes) with brass mounts, an escutcheon with a crown without monogram under the butt. The rare Brass-tipped ramrod in three pieces inside the butt. Saddle ring. Rare. length 99.5 cm.
dating: 1850/60 provenance: Germany, Smoothbore, round, 15 mm cal. barrel, with octagonal base, with remains of browning, high foresight, nozzle with ring; tang with rear sight; forward spring lock with safety lock; half wooden stock (restorations) with brass and iron mounts, trigger guard with finger support. Suspension ring. length 39
dating: 1852 provenance: Austria, Smoothbore, round, 17 mm cal. barrel, with slightly legible mark; tang with remains of engravings; lock with imperial mark and date '852'; wooden stock with brass mounts, all marked '66,' only the butt-plate marked '5', with suspension ring. length 43 cm.
dating: 1848 provenance: Turin, Smoothbore, two-stage, 17 mm cal. barrel with two slightly legible marks (Charles Albert) and date '1848' at the base; lock with Turin manufactory markings; wooden stock with iron mounts and suspension ring. Born without ramrod. length 35 cm.
dating: 1848 provenance: Turin, Smoothbore, two-stage, 17 mm cal. barrel, with two slightly legible marks and date '1848' at the base; lock with few remains of Turin manufacture markings; wooden stock with iron mounts and suspension ring. Born without ramrod. Complete with string. length 35 cm.
dating: about 1870 provenance: Kingdom of Italy, Round, rifled, 11 mm cal. barrel, high foresights; smooth, six-shot cylinder, with mark; frame with serial number '42XX,' marked 'G. GLISENTI / BRESCIA,' ACCIAJO FUSO' and 'G.G.' Extractor and loading gate. Grip with wooden grips embossed with the letters 'DS'; ring for the strap. Working mechanism. length 31.5 cm.
dating: 1915 provenance: Brescia, Octagonal, rifled, 10,4 cal. barrel, with foresight. Grooved, six-shot cylinder, frame marked 'TOSCHI CASTELLI BRESCIA 1915' (the first word double-marked) and with lion mark; checkered, wooden grips. Suspension ring. length 26 cm.
dating: about 1880 provenance: Brescia, Rifled, octagonal, 10 mm cal. barrel, with foresight; grooved, six-shot cylinder, smooth frame with mark 'GLISENTI' and 'BRESCIA' divided with a Sabaudo shield, serial number 'U 250,' fully browned (refreshed), wooden grips, suspension ring. length 28.5 cm.
dating: about 1880 provenance: Kingdom of Italy, Octagonal, rifled, 11 mm cal barrel, provided with front sight and 'SA' mark; six-shot grooved cylinder; frame marked 'MN108', 'GLISENTI BRESCIA', 'FB' under crown, 'CA' and another mark; provided with side extractor and loading gate; checkered wooden grips; girp with ring for the strap. Working mechanism. Rare. length 31 cm.
dating: 1893 provenance: Germany, Round, rifled, 11 mm cal. barrel, with octagonal base, with foresight, bearing two serial numbers and marks. Grooved, six-shot cylinder. Iron frame marked 'ERFURT 1893.' Serial number '18xx.' Screws and other items numbered. Safety lock with lever on left side. About 50% of antique browning. Smooth, wooden grips. Ring for the strap. length 28
dating: 1887-1890 provenance: USA, Round, rifled, 20' barrel, with foresight and folding and adjustable rear sight, company marking and patents up to 1887, in two lines, caliber inscription '44 Cal. ' at the base. Bore to be cleaned, visible rifling. Frame with lower tang featuring the serial number '57xxx' Working mechanism. Remains of browning, some pitting. Iron fore-end. Walnut butt. Saddle ring on the left side. length 94 cm.
dating: about 1855 provenance: England, Six-shot, 10 mm cal barrel/cylinder group with grooves and marks of the Birmingham test bench; frame of oval section signed 'J. R. COOPER'S PATENT' among floral engravings. Lower hammer with ring trigger. Wooden grips. length 20 cm.
dating: about 1855 provenance: Belgium, Group of four round, smoothbore, numbered, 9 mm cal barrels made of damask; frame of almost round section, finely engraved with floral motifs, lower hammer with ring trigger. Black wooden grips, frame marked 'MARIETTE BREVETE'. length 18.5 cm.
dating: about 1855 provenance: Belgium, Group of six round, smoothbore, 9 mm cal barrels in damask, with numbers; frame of almost round section, finely engraved with floral motifs, lower hammer with ring trigger. Black grips made of grooved wood, the frame marked 'MARIETTE BREVETE' and with serial number '15xx', iron mounts decorated en suite. length 21 cm.
dating: about 1870 provenance: France, Round, smoothbore, 9 mm cal barrel with front sight; six-shot cylinder engraved with floral motifs; frame engraved en suite and with serial number '32xx'. 75% of browning. Loading gate and ring trigger. Wooden grips, suspension ring. length 26.5 cm.
dating: about 1855 provenance: Belgium, Six-shot, 8 mm cal barrel/cylinder group; the central pin can be unscrewed to load the gun. Frame of oval section finely engraved with floral motifs on geometric motifs, black wooden grips. Lower hammer with ring trigger provided with folding finger support, frame marked 'MARIETTE BREVETE'. Very rare with rimfire and folding finger support. length 20.5 cm.
dating: provenance: Nuremberg, Smoothbore, two-stage, 12 mm cal. barrel, the first part octagonal with monogram 'P D' on the lateral sides, with a snake at the center, after a round ring and with slightly bell-mouthed nozzle; lock with external wheel, the lock plate with deep Nuremberg mark and 'KS' mark divided by a hare (Stöckel 8335, page 1254 found on a wheel gun around 1560/70). Carved spring, sliding pan cover. Stock entirely made of smooth iron, the pommel with straight base, curved towards the trigger guard. Replaced, iron ramrod. length 37 cm.
dating: 16th Century provenance: Nuremberg, Smoothbore, two-stage, 10 mm cal. barrel, the first part octagonal with remains of engravings at the base and Nuremberg mark on the left side, after a round ring with remains of engravings; lock with external wheel covered by a convex, circular shield, the lock plate with Nuremberg mark and one with crossed keys (Regensburg?); spring, safety lock and cock with engravings. Snap sliding pan cover. Stock entirely made of iron, with sphere-shaped pommel and belt hook. Ramrod also made of iron. Areas with pitting. Rare. length 25 cm.
dating: circa 1700 provenance: Northern Europe, Smoothbore, two-stage, 14.5 mm cal barrels, octagonal at the first part and decorated with brass plates engraved with floral motifs, then round, after a brass-coated ring; engraved brass rib with front sight; locks with external wheel and brass covering and engraved with floral motifs, sliding snap pan cover. Marked 'BK'with a clover inside. Fruit wood stocks with deer-horn mounts, iron trigger guards decorated with a brass plate en suite. Horn-tipped, wooden ramrods. length 50.5 cm.
dating: Late 16th Century provenance: Dresden, Smoothbore, two-stage, 15,5 mm cal. barrel, first octagonal, after round, with a carved ring at the girdle, the base with frame and star marks in three groups of three (Stöckel nr. 5889, vol. II, p. 1478); lock with flat lock plate with external wheel, engraved springs, with safety lock and snap sliding pan cover. Full stock made of blackened wood, scales engraved with bone inlays; sphere-shaped pommel with a bone medallion at the center bearing the Saxon royal coat of arms. Bone-tipped wooden ramrod and iron cartridge extractor. length 57 cm.

-
1087795 item(s)/page