There are 1087795 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribeA collection of 19th century and later fob seals, comprising five hardstone and stone set fob seals, of varied design, and a further example, (seal missing), suspended from a split ring, largest fob seal length 3.3cmCombined gross weight approximately 79.3gm (some or all items may be gilt metal mounted)
A diamond two stone crossover ring, the round brilliant-cut diamonds in eight claw settings, two colour precious metal mounted, stamped '18CT PLA', total diamond weight approximately 1.50ct, ring size MBoth diamonds contain dark mineral and fracture inclusions, some of these inclusions surface-reaching, with scattered chips/nicks to the girdle of each stone. Estimated P2 to P3 clarity and J to K colour, assessed mounted. Average diamond dimensions approximately 5.8mm diameter x 3.8mm depth. The ring mount has general surface wear, the shank has been re-sized and some of the claws have been re-tipped. Metal standard is untested. Gross weight approximately 3gm.
A collection of jewellery, comprising an amethyst and half pearl pendant necklace, stamped '9CT', a dog bar brooch, stamped '15CT', a further bar brooch, stamped '9CT', a 22ct gold wedding band, a 9ct gold bangle, a signet ring, a dress stud, signed TIFFANY & CO. and stamped '18K', three panel brooches, and a white metal curb-link bracelet, (half pearls untested for origin), necklace length 41cm (11)Approximate gross weights only: pendant necklace 3.6gm, dog bar brooch 5.8gm, heart bar brooch 1.7gm, wedding band 6.3gm, bangle 10.3gm, signet ring 3.7gm, dress stud 1gm, agate brooch 18.3gm, ceramic brooch 17gm, fossil brooch 34.5gm, bracelet 51.5gm
A gem set dress ring, the oval cabochon blue stone in collet setting, between single-cut diamond set shoulders, 9ct gold mounted, together with a garnet single stone bar brooch, also 9ct gold mounted, ring size N, brooch length 5.1cm (2)Approximate gross weights only: ring 4.2gm, brooch 4gm
A diamond cocktail ring, designed as a tiered cluster of pear and marquise-cut diamonds in claw settings, between graduated baguette-cut diamond set crossover shoulders, white precious metal mounted, stamped 'PL' and numbered, total diamond weight approximately 3.30ct to 3.50ct, ring size approximately K Diamonds are well matched with a bright and lively appearance, graduating in size from approximately 0.60ct for the largest pear-shaped diamond to 0.02ct for the smallest baguette-cut diamond, estimated VS1 to SI2 clarity and H to J colour, assessed mounted. The ring mount is likely to be mid to late 20th century in date and has surface wear, scuffs and nicks/chips throughout. Length of setting 3cm, height of setting approximately 0.9cm. Metal standard is untested. Gross weight approximately 11gm.
A sapphire and diamond cluster ring, the rectangular step-cut sapphire millegrain collet set within a border of single-cut diamonds, two colour precious metal mounted, total diamond weight approximately 0.12ct, ring size L½The sapphire has a mid to dark blue hue with faint whiteish colour zoning and is chipped to one corner, with surface wear to the remainder of the stone. Sapphire dimensions approximately 4mm length x 3.5mm width. Diamonds are well matched and fairly bright, occasional stones with small chips/nicks. The ring mount has signs of general wear and the shank has worn a little thin. Metal standard is untested. Length of setting 0.8cm. Gross weight approx. 2gm.
A pink tourmaline, sapphire and diamond cocktail ring by Rodney Rayner, the oval cabochon pink tourmaline enclosed to each shoulder by three pavé set petals of round brilliant-cut diamonds and circular mixed-cut sapphires, 18ct white gold mounted, hallmarked for London 2003 with maker's mark RHR, total diamond weight approximately 0.25ct, ring size approximately N - OLight surface wear, scuffs and nicks/small chips to the mount and gemstones, commensurate for occasional use. The pink tourmaline contains multiple fracture, fissure and needle inclusions, some that are surface-reaching, and measures approximately 21mm length x 14.4mm width x 8.4mm depth. Sapphires are well matched, of steely-blue hues, occasional stones with faint colour zoning and small inclusions. Diamonds are mostly well matched, bright and lively, estimated VS1 to SI1 clarity and H to K colour, assessed mounted. Hallmarks and the maker's mark are clearly struck. Gross weight approximately 17.3gm.
A late Victorian diamond five stone ring, the graduated old-cut diamonds in scalloped gypsy style setting, 18ct gold mounted, with interior inscription dated 1885, numbered 5323, total diamond weight approximately 0.55ct, ring size SDiamonds graduate from approximately 0.22ct to 0.06ct in size and are well matched with a bright and lively appearance. Some stones have girdle chips, estimated SI1 to P1 clarity and I to K colour, assessed mounted. The ring mount has general surface wear, scratches and scuffs and the shank has been re-sized, with a later added section inserted between the hallmarks, which are partially worn. The maker's mark appears to be 'G. BRO'. The band tapers in width from 6.4mm to 3.6mm in width. Gross weight approx. 4.3gm.
A collection of jewellery, comprising two 9ct gold mounted shell cameo brooches, a further shell cameo brooch, a diamond single stone ring, stamped '18CT PLAT', a 22ct gold wedding band, a 9ct gold claddagh ring, and a ropetwist-link chain, the clasp stamped '9CT', first ring size M (7)Approximate gross weights only: 9ct gold mounted cameo brooches combined 23gm, other cameo brooch 11gm, diamond ring 2.3gm, wedding band 4.8gm, claddagh ring 2.5gm, chain 8.9gm
Two boulder opal dress rings, the first with a navette-shaped cabochon boulder opal in fluted collet setting, with Dutch leaf gold mark, the second with a circular cabochon boulder opal in pinched collet setting, between scrolled shoulders, yellow precious metal mounted, ring sizes approximately P and M½ respectively (2)Gross weights only approximately: first ring 4.6gm, second ring 2.7gm (metal standards are untested)
A diamond and ruby cluster ring, the old brilliant-cut diamond in millegrain collet setting, bordered by scissor-cut rubies, between diamond set shoulders, white precious metal mounted, (rubies untested for natural/synthetic origin), principal diamond weight approximately 1.55ct, ring size O½The diamond is lively and fairly bright, drawing a pronounced yellow tint, with a chip to the side crown facets and two surface-reaching fractures, estimated P2 clarity (due to chip/fractures) and tinted colour, assessed mounted. Principal diamond dimensions approximately 7.4mm diameter x 4.7mm depth. Shoulders set diamonds are fairly bright. Rubies are well matched, of fairly vibrant pinkish-red hues with areas of faint colour zoning and surface wear. Rubies are untested for natural/synthetic origin due to their small size. The ring mount has surface wear and is inscribed '1.72 CT'. Metal standard is untested. Diameter of cluster setting 11.3mm. Gross weight approximately 2.9gm.
A diamond single stone ring, the old-cut diamond in eight claw setting, two colour precious metal mounted, stamped '18CT', diamond weight approximately 0.65ct, ring size MThe diamond is drawing a yellowish tint but has a lively and fairly bright appearance, with estimated L to M colour and SI1 clarity, assessed mounted. Diamond dimensions approximately 5.5mm diameter x 4mm depth (diamond outline is off-round). The ring mount has surface wear and has worn slightly flat to the sides of the shank and setting. Metal standard is untested. Gross weight approximately 2.6gm.
A diamond and gem set dress ring, of trifurcated design, set with pairs of cushion-shaped old-cut diamonds and triangular mixed-cut rubies, (rubies untested for natural/synthetic origin), framed by old-cut diamond points, yellow precious metal mounted, total diamond weight approximately 1.60ct, ring size M½Principal diamonds are bright and lively, both with facet edge abrasion, one stone with a central dark mineral inclusion, estimated SI2 to P1 clarity and L to M colour, assessed mounted. The prinicpal diamonds measure approximately 6.2mm length x 4.6mm width x 3.8mm depth and 5.2mm length x 5mm width x 4.1mm depth respectively. Some of the smaller old-cut diamond points are chipped/fractured. Rubies have pinkish-red hues and are heavily abraded with scuffs, scratches and chips/nicks. The ring mount has general surface wear, with a split and thinning to the base of the setting, a repair to the centre of the setting and patchy wear to the claws. Metal standard is untested. Length of setting 1.7cm. Gross weight approximately 4.8gm.
A collection of jewellery, comprising a citrine and white enamel navette-shaped panel brooch, a belt-shaped panel brooch, a turquoise and diamond half hoop ring, stamped '18CT', and a pair of turquoise-coloured cabochon ear pendants, first brooch length 3.2cm (4)Approximate gross weights only: first brooch 5.5gm, second brooch 5.5gm, ring 2gm, ear pendants 3.2gm
An 18ct gold signet ring, hallmarked for Birmingham 1918, with maker's mark D&F for Deakin & Francis, initialled, ring size approximately Q½General surface wear, scuffs, nicks/chips and pitting throughout, commensurate for age and use. Hallmarks are clearly struck. Gross weight approximately 8.2gm.
A sapphire and diamond cluster ring, the circular mixed-cut sapphire claw set within a border of old-cut diamonds, above a scalloped gallery, two colour mounted, stamped '18CT', total diamond weight approximately 0.40ct, ring size O½The sapphire has a milky purplish-blue hue with areas of straight and angular whiteish colour zoning that are just visible to the unaided eye. The sapphire has small chips, scuffs and surface wear, measuring approximately 7.9mm diameter x 6.3mm depth. The sapphire is untested for origin and treatments. Diamonds have variable colour and clarity, some stones with a slightly greyish hue and chips/fractures, estimated SI2 to P3 clarity and I to tinted colour, assessed mounted. The mount has considerable wear to the setting and some of the claws/setting tips may require repair. The setting may be a gold/silver combination but is untested as such. The shank appears to be later replaced, with solder joins present at the junctions to the setting. The shank has been re-sized and has surface wear throughout. Gross weight approximately 3.7gm.
A sapphire and diamond half hoop ring, the graduated oval and cushion-shaped mixed-cut sapphires spaced by lasque-cut diamond points, yellow precious metal mounted, stamped '18CT', together with a 9ct gold wedding band, ring sizes M and N½ respectively (2)Approximate gross weights only: first ring 3.2gm, second ring 2.1gm
Two diamond dress rings, of similar design, each a tapered band with fluted shoulders, pavé set with round brilliant-cut diamonds, two colour precious metal mounted, ring sizes O½ and Q (2)First ring (size O½): general surface wear, scuffs and chips/nicks to mount. Patchy dark staining to interior. Shank is stamped '14K'. Diamonds are slightly graduated and well matched, bright and lively in appearance, occasional stones with small surface nicks. Estimated VS2 to SI2 clarity and H to J colour, assessed mounted. Total diamond weight approximately 1.50ct. Metal standard is untested. Gross weight approximately 14gm. Second ring (size Q): general surface wear, scuffs and chips/nicks to mount. The shank has been re-sized with a later added section and has associated dark solder joins, with further patchy dark staining to the mount interior. Diamonds are slightly graduated and well matched, fairly bright and lively in appearance, occasional stones with chips/fractures. Estimated SI1 to P2 clarity and I to K colour, assessed mounted. Total diamond weight approximately 1.50ct. Metal standard is untested. Gross weight approximately 13.3gm.
A diamond three stone ring, the round brilliant-cut diamonds in claw setting, two colour precious metal mounted, together with a blue stone and diamond dress ring, 18ct white gold mounted, and a ruby and white stone half hoop ring, 9ct white gold mounted, first ring total diamond weight approximately 0.20ct, ring sizes M and L (3)Approximate gross weights only: first ring 2.2gm, second ring 3.6gm, third ring 2.4gm
A ruby and diamond cluster ring, the circular mixed-cut ruby claw set within a pierced surround of single-cut diamonds, between similarly cut diamond set foliate shoulders, white precious metal mounted, total diamond weight approximately 0.20ct, ring size approximately K - LThe ruby has a pinkish-red hue and contains fracture, fissure and mineral inclusions that are in some cases visible to the unaided eye, measuring approximately 4.8mm diameter x 4mm depth. The ruby has scattered small chips and surface wear, and is set slightly off-centre to the setting. Diamonds have slightly variable clarity, some stones with chips and fractures. One of the shoulder set stones is split/damaged and another stone is a later brilliant-cut replacement. The ring mount has general surface wear, patchy thinning to the tips of the claws and settings, and the shank has worn very thin. The gallery, shoulders and shank have areas of solder, possibly due to repair. Metal standard is untested. Diameter of cluster setting 1.1cm. Gross weight approximately 2.5gm.
A two colour precious metal chain fob, of fancy curb-link design, with possible Vienna assay office marks, suspending a glazed locket pendant, chain length 13cm, pendant length 2.25cmGeneral surface wear, scuffs and nicks to chain and pendant, commensurate for use. The chain fittings have initial 'A' marks possibly for Vienna and indistinct maker's marks, possibly 'B&F'. The pendant loops have patchy thinning and initial 'A' mark. The swivel clasp is functioning, the bolt ring clasp is a little loose. Metal standard is untested. Gross weights approximately: chain 18.8gm, pendant 4.3gm.
A diamond dress ring, the crossover band highlighted with an old-cut diamond of brown tint in collet setting, (diamond untested for natural colour), accented with two smaller similarly set old and single-cut diamonds, 18ct two colour gold mounted, maker's mark GG, total diamond weight approximately 0.35ct, ring size Q½The mount is of modern manufacture, with surface wear, scuffs and nicks throughout. Solder joins are present at junctions within the setting, presumed to be part of manufacture. The diamond of brown tint contains surface-reaching fracture inclusions and weighs approximately 0.30ct; we are unable to provide an estimated clarity grading due to the saturation of the colour tint. This diamond is untested for natural/treated colour. Smaller diamonds are relatively bright and lively. Hallmarks are clearly struck. Gross weight approximately 3.3gm.
An abstract silver dress ring designed by Astrid Fog for Georg Jensen, the hollow three dimensional panel designed as a triangular prism, to a tapered hoop, signed and stamped '925S DENMARK', numbered 158, ring size MShallow ding to one edge of panel and further scuffs, nicks and chips throughout the mount, commensurate for use. Marks are clearly struck. Panel length 3.25cm. Gross weight approximately 18gm.
An 18ct gold fancy-link chain by Theo Fennell, stamped '750', together with a fancy-link bracelet, stamped '10kt', a 9ct gold and stone set ring, and a pair of similarly set ear studs, chain length 40.5cm (4)Approximate gross weights only: chain 4.7gm, bracelet 6.5gm, ring 3.4gm, ear studs 1.8gm
An Indian enamel and diamond set archer's ring, the shaped mount applied with a trio of flowerhead clusters of lasque-cut diamonds in foiled closed-back settings, framed by similarly set foliage, to a blue enamel ground highlighted with gilt foliage and pale blue borders, the interior decorated with further polychrome enamel flowerheads and foliage, ring size approximately S - T
A diamond cluster ring, centred with a radiant-cut diamond of yellow tint (untested for natural colour), framed by round brilliant-cut diamonds in claw setting, between two similarly set trilliant-cut diamonds, white precious metal mounted, stamped 'Pt', principal diamond weight approximately 1ct, remaining total diamond weight approximately 0.70ct, ring size N½Accompanied by retailer's Certificate of Valuation dated 15 February 2005 The principal diamond has a pronounced yellow tint (untested for natural colour) and contains a cluster of fracture inclusions to one side, with estimated SI2 to P1 clarity, assessed mounted. Principal diamond dimensions approximately 5.8mm length x 5.15mm width x 3.7mm depth. Remaining diamonds are well matched, bright and lively, with estimated VS2 to SI2 clarity and H to I colour, assessed mounted. Trilliant-cut diamonds weigh approximately 0.15ct each. Brilliant-cut diamonds weight approximately 0.025ct to 0.03ct each. The mount appears to be relatively modern, with surface wear throughout and solder seams to the base of the setting and shoulders. Length of cluster setting 1.1cm. Metal standard is untested. Gross weight approximately 8.2gm.
A synthetic gem set bracelet, designed as a series of circular mixed-cut synthetic colour change sapphires in claw settings, framed by beads and scrolled wirework, yellow precious metal mounted, together with a smoky quartz single stone pendant, also yellow precious metal mounted, and an 18ct gold wedding band, bracelet length approximately 18cm, pendant length 4.85cm (3)Approximate gross weights only: bracelet 44.7gm, pendant 17.2gm, ring 2.9gm (bracelet and pendant are untested for metal standard)
A diamond three stone ring, the graduated round brilliant-cut diamonds in eight claw settings, white precious metal mounted, principal diamond weight approximately 0.70ct, total diamond weight approximately 1.50ct, ring size PDiamonds are well matched, bright and lively, with estimated SI2 to P1 clarity and H to J colour, assessed mounted. Diamond dimensions approximately: centre stone 6mm diameter x 3.2mm depth; outer stones 5.1mm diameter x 2.7mm depth each. The mount appears to be relatively modern and has general surface wear, with some deeper scuffs to the base of the shoulders/setting and to the shank. The shank is indistinctly marked and metal standard is untested. Gross weight approximately 6.2gm.
A ruby and diamond cluster ring, the circular mixed-cut rubies and brilliant and single-cut diamonds in claw setting, 18ct two colour gold mounted, hallmarked for London 1975, together with two diamond and half pearl set bar brooches, and a diamond set panel brooch, (half pearls untested for origin), ring size I (4)Approximate gross weights only: ring 2.9gm, bar brooches combined 5.7gm
A diamond five stone ring, the graduated old brilliant-cut diamonds in claw setting, two colour precious metal mounted, stamped '18CT', total diamond weight approximately 0.35ct, ring size Q½One of the outer diamonds is a later modern brilliant-cut replacement. Diamonds are fairly well matched and lively, graduating in size from approximately 0.12ct to 0.03ct, one of the stones with a chip to the side. Remaining diamonds have estimated SI1 to P1 clarity and I to L colour, assessed mounted. The shank and setting are worn and some of the claws have been re-tipped. Metal standard is untested. Gross weight approximately 2.2gm.
An emerald and rock crystal dress ring by John Donald, the abstract textured panel enclosing a carved rock crystal flowerhead, with central circular mixed-cut emerald accent, framed by beaded wirework, 18ct gold mounted, signed JAD and hallmarked for London 1992, accompanied by a pair of similarly set ear clips by John Donald, each abstract textured panel enclosing a carved rock crystal flowerhead, with central cabochon emerald accent, on clip fittings, signed JAD, with partial London hallmarks, ring size N, ear clips length 1.65cm (2)Ring: general surface wear, scratches, scuffs, nicks and chips to the mount and gemstones, commensurate for use. The setting and gallery have an irregular surface texture that is inherent to the design. The emerald contains typical fracture, fissure and mineral inclusions, some of these surface-reaching. Hallmarks and the maker's mark are clearly struck. Width of setting 1.25cm. Gross weight approximately 6gm. Ear clips: general surface wear, scratches, scuffs, nicks and chips to the mount and gemstones, commensurate for use. The settings have an irregular surface texture that is inherent to the design. The emeralds contain typical fracture, fissure and mineral inclusions, some of these surface-reaching. Hallmarks are positioned to one of the fittings and are worn/mis-struck, and so we are unable to confirm the gold standard. Part of the date letter is present, possibly for 1966. The maker's mark has patchy wear. Both clips are functioning. Gross weight approximately 5.7gm.
A diamond three stone ring, the graduated old-cut diamonds in claw setting, two colour precious metal mounted, together with a yellow precious metal wedding band, stamped '18CT', and a white metal stone set ring, first ring size O½ (3)Approximate gross weights only: first ring 2gm, second ring 3.6gm
A late 18th century ivory and enamel memorial ring, the oval ivory panel painted to depict a maiden gesturing towards a funerary urn on plinth, inscribed 'LIFE HOW SHORT', framed by a weeping willow tree, within a black enamel border inscribed 'AARON MORRITT OB 29 APR 1793 AE 43', between tapered foliate engraved shoulders, together with an agate and purple stone double cluster brooch, (later fitting), ring size approximately L, brooch length 3.3cm (2)Ivory registration no. FP25K67V Ring: crazing, surface wear and dust/dirt residue to ivory miniature panel, with scuffs, scratches and nicks to glazing above. Small chips/nicks and scuffs to enamel inscription. Panel measures approximately 2.8cm length x 1.8cm width. The ring mount has surface wear, with solder seams visible at junctions to the panel reverse and shoulders, and is untested as gold/gilt metal. Engraved decoration has patchy light wear. Gross weight approximately 5.8gm. Brooch: The central agate cabochons are foil-backed and the purple stones are possibly foil-backed pastes, all with considerable abrasion, scuffs and chips to the surface. Mount is two-colour with considerable wear and tarnishing, untested as silver/gold/gilt metal. Fittings are later replaced/added. Gross weight approximately 8.2gm.
A collection of jewellery, comprising a red and white stone half hoop ring, 18ct gold mounted, a blue and white stone half hoop ring, stamped '18CT', a diamond set gypsy ring, 18ct gold mounted, two further stone set dress rings, a fancy-link bracelet, suspending two charms, a pair of ear pendants, a gilt metal locket pendant, and a pendant on chain, first ring size K (9)Approximate gross weights only: first ring 1.8gm, second ring 2.5gm, third ring 2.5gm, two further rings 2gm combined, bracelet 5.7gm, ear pendants 2gm (metal standards for non-hallmarked items are untested)
A ruby and diamond half hoop ring, centred with a line of cushion-shaped rubies, between two rows of old-cut diamonds, spaced by lasque-cut diamond points, yellow precious metal mounted, total diamond weight approximately 1.30ct, ring size KRubies are well matched, of pinkish-red hues, most stones containing fractures, 'silk' and mineral inclusions and faint colour zoning. All rubies have surface wear, scuffs and nicks/small chips. Average ruby size approximately 3.5mm length x 2.5mm width. The old-cut diamonds are well matched, bright and lively, some stones with small nicks/chips, estimated H to K colour and SI1 to P1 clarity, assessed mounted. These diamonds slightly graduate from approximately 0.10ct to 0.13ct each. Lasque-cut diamonds have a typically greyish, fractured appearance. The mount has surface wear, with some rubbing to the claws. Metal standard is untested. Setting dimensions approximately 1.9cm length x 1.05cm width. Gross weight approximately 5.8gm.
Two pietra dura panel brooches, each depicting a floral spray, together with a pietra dura pendant, of similar design, a shell cameo brooch, depicting a male portrait profile, a seed pearl and turquoise-coloured cabochon cluster ring, and a seed pearl cluster pendant, (all seed pearls untested for origin), ring size approximately M (6)Approximate gross weights only: square pietra dura brooch 5.8gm, oval pietra dura brooch 4.8gm, pietra dura pendant 2.9gm, cameo 1.7gm, ring 4.5gm, seed pearl pendant 4.3gm (all metal standards are untested).
An emerald and diamond five stone ring, alternately set with round brilliant-cut diamonds and oval mixed-cut emeralds in collet settings, 9ct yellow gold mounted, maker's mark WNM, total diamond weight approximately 0.60ct, ring size RDiamonds are well matched, bright and lively, estimated SI1 to SI2 clarity and H to J colour, assessed mounted. The central diamond weighs approximately 0.30ct, each of the outer stones weigh approximately 0.15ct. Emeralds are well matched but heavily included with fractures, fissures and mineral inclusions, some of these inclusions surface-reaching. Both emeralds have scuffs and nicks/chips, each measures approximately 5.5mm length x 4mm width. The mount is modern with general surface wear and hallmarks are partly worn but just legible. Gross weight approximately 4.7gm.
An amethyst single stone dress ring, the oval fancy-cut amethyst in collet setting, above a scroll pierced gallery and shoulders, yellow precious metal mounted, ring size L½The mount is of relatively modern manufacture, with general surface wear, scuffs and nicks throughout and areas of pitting/porosity. The amethyst has a mid pinkish-purple hue with light surface wear, measuring approximately 20mm length x 16.5mm width x 11.5mm depth. Metal standard is untested and the mount appears to be unmarked. Gross weight approximately 16.6gm.
A diamond set band ring, the slightly tapered band applied with a wishbone-shaped panel of graduated round brilliant-cut diamonds, two colour precious metal mounted, indistinctly stamped '18K', total diamond weight approximately 0.95ct, ring size approximately LDiamonds are well matched, bright and lively, graduating in size from approximately 0.15ct to 0.015ct. One of the larger diamonds is a little loose in the setting and one of the smaller diamonds is chipped. Remaining diamonds have estimated SI1 to P1 clarity and H to J colour, assessed mounted. The ring mount has general wear, scratches, scuffs and chips/nicks, measuring 1.6cm width at the front and 1.2cm width at the back. Metal standard is untested. Gross weight approximately 14.7gm.
A diamond three stone ring, the graduated old-cut diamonds in illusion settings, two colour precious metal mounted, total diamond weight approximately 0.30ct, ring size M½Diamonds are well matched, tinted in hue but with a lively appearance and localised facet edge abrasion, estimate SI1 to P1 clarity and K to M colour, assessed mounted. The diamonds weigh approximately 0.18ct and 0.06ct each.The ring mount has general surface wear and would benefit from cleaning. The shank has been re-sized and marks are indistinct. Metal standard is untested. Gross weight approximately 3gm.
A blue topaz single stone ring by Catherine Best, signed CEB and stamped '750', accompanied by maker's case and certificate, together with a blue stone bracelet, stamped '375', two 9ct gold and blue stone dress rings, and a gate-link bracelet, first ring size M, first bracelet length 19.3cm (5)Approximate gross weights only (metal standards are untested): first ring 6gm, first bracelet 12.2gm, 9ct gold dress rings combined 4.2gm, second bracelet 6.2gm
A late Victorian 18ct gold half hunter pocket watch, the white enamel dial with Roman numerals and subsidiary seconds dial, to a keyless wind movement signed Army & Navy Cooperative Society Ld, 117 Victoria Str., London, S.W., the case with blue enamel chapter ring, hallmarked for London 1887, with interior long service presentation inscription for the Metropolitan Police dated 1891, the dial, movement and case numbered 4259, accompanied by a belcher-link chain with clasp stamped '9C', suspending a T-bar and 9ct gold mounted bloodstone and carnelian swivel fob, initialled, watch case diameter 4.9cm, chain length 31cm (2)Watch only: surface wear, scuffs and nicks/chips to dial. Dings to base of case. between hinges. General surface wear, scuffs, scratches and chips/nicks to case, slight gapping to sides when cover/back are closed. Tool marks to case sides and back. Heavy wear to marks on top loop, thinning to top loop, remaining hallmarks are clearly struck. Patchy wear to case numbers. The movement currently runs when wound but is untested for working order, which cannot be guaranteed. Gross weight approximately 108.5gm.Gross weight of chain, t-bar and swivel fob combined approximately 20.2gm.
A diamond panel ring, the openwork foliate panel of graduated cushion-shaped old-cut diamonds spaced by smaller old-cut diamond accents, between tapered wirework shoulders, two colour precious metal mounted, indistinctly stamped '14K', total diamond weight approximately 1.90ct, ring size LDiamonds have slightly variable colour and clarity, some stones with surface-reaching fractures/chips and yellowish colour tints, estimated I to L colour and SI1 to P2 clarity, assessed mounted. Diamonds graduate from approximately 0.40ct to 0.02ct in size. The mount has fine splits to the gallery beneath the setting and areas of solder repair to the setting/gallery, with general surface wear, scuffs and nicks/chips throughout. Metal standard is untested. Length of panel 3.3cm. Gross weight approximately 8.1gm.
A diamond three stone ring, the slightly graduated round brilliant-cut diamonds in claw settings, two colour precious metal mounted, total diamond weight approximately 0.90ct, ring size ODiamonds have a lively appearance, the centre stone drawing a pronounced yellowish tint, with estimated K to N (tinted) colour and VS1 to SI1 clarity, assessed mounted. Diamond dimensions approximately: 4.7mm diameter x 2.6mm depth (centre stone) and 4.4mm diameter x 2.5mm depth (outer stones). The ring mount has general surface wear, with re-tipping to the claws, and the shank has been re-sized. Metal standard is untested. Gross weight approximately 1.7gm.
A collection of jewellery, comprising a Victorian shell cameo brooch, carved to depict the portrait profile of a bacchante, a diamond single stone bar brooch, stamped '15CT', an open face fob watch, stamped 'K18', (glass and hands deficient), a red stone cluster panel brooch/pendant, glazed verso, a two colour dress ring, of modernist design, stamped '750', a cameo cluster ring, stamped '9CT', a pair of gilt metal lorgnettes, a gilt metal glazed locket pendant, and a hardstone panel brooch, first brooch length 5.25cm (9)Approximate gross weights only: cameo brooch 15.8gm, single stone bar brooch 2.6gm, fob watch 29gm, cluster panel brooch/pendant 14.8gm, two colour dress ring 4.4gm, cameo cluster ring 3.5gm, gilt metal lorgnettes 25.8gm, a gilt metal locket pendant 10.7gm, hardstone panel brooch 3.5gm
A yellow quartz single stone dress ring by Esther Eyre, the oval fancy-cut yellow quartz framed by vine leaves and tendrils, 18ct gold mounted, hallmarked for London 2004 and signed EME, accompanied by maker's case, ring size Q½The mount has general surface wear, scuffs and nicks throughout and areas of porosity, with small splits/chips/creases to each of the shoulders, mostly evident to the underside of the mount. The yellow quartz has a greenish-yellow hue with light surface wear and is slightly loose in the setting, measuring approximately 24.5mm length x 17.5mm width x 13.2mm depth. Hallmarks and the maker's mark are clearly struck. Gross weight approximately 18.4gm.
A collection of antique and later jewellery, comprising a pietra dura panel bracelet and loose panel, (damaged), a banded agate bead bracelet and loose panel, a pair of Victorian ear pendants, on possibly later screw-back fittings, (drops deficient), a memorial panel brooch, a diamond set watch ring, (glass damaged), a glazed locket pendant on chain, a shell cameo brooch (fitting deficient), and a single stone dress ring, loose pietra dura panel length 5cm (10)Approximate gross weights only: ear pendants 8gm, locket pendant on chain 6.4gm, cameo brooch 2.8gm, watch ring 7.9gm, single stone ring 5.4gm (all untested as gold/gilt metal)
A collection of jewellery, to include a ruby and diamond half hoop ring, 18ct gold mounted, a pair of star ear studs by Catherine Best, stamped '375', accompanied by maker's certificate, (butterflies deficient), a 22ct gold wedding band, an 18ct white gold wedding band, five 9ct gold and stone set dress rings, a pair of elephant ear studs, stamped '18C', a 9ct gold locket pendant on chain, a cultured pearl single strand necklace, and assorted further dress rings, earrings, etc., (half pearls untested for origin), first ring size M (qty)Approximate gross weights only: ruby and diamond half hoop ring 2.6gm, star ear studs 2gm, 22ct gold wedding band 3.9gm, 18ct white gold wedding band 3gm, five 9ct gold and stone set dress rings combined 11.3gm, elephant ear studs 5.8gm, locket pendant on chain 3.2gm, cultured pearl necklace, and assorted further dress rings and earrings combined 31gm
A gilt metal cased wristwatch by Omega, the circular white enamel dial with black and red stylised Arabic numerals and subsidiary seconds dial, to a jewelled manual wind movement numbered 6338386, case numbered 7090996, on a later unassociated strap, together with a wedding band, stamped '22CT', and a green stone bar brooch, watch case width 2.6cm (3)Watch movement only: runs when wound but is untested for working order, which cannot be guaranteedApproximate gross weights only: ring 4.7gm, brooch 4.8gm
A collection of jewellery, comprising a charm bracelet, the 9ct gold fancy-link bracelet suspending a collection of 9ct gold and yellow metal charms, to include a cupid and a motor car, together with a diamond three stone ring, a cluster pendant on chain, a 22ct gold wedding band, and a simulated pearl necklace, bracelet length approximately 18.5cm (5) Approximate gross weights only: charm bracelet 24.5gm, three stone ring 1.2gm, pendant on chain 1.2gm (pendant is 9ct gold mounted), wedding band 4.1gm
A ruby and diamond cluster ring, the navette-shaped cluster centred with an oval mixed-cut ruby bordered by old-cut diamonds, between pierced and tapered shoulders, yellow precious metal mounted, total diamond weight approximately 0.30ct, ring size OScuffs and nicks/small chips to ruby. Diamonds are well matched, fairly bright and lively, some stones with surface-reaching fractures and chips, estimated I to K colour and SI1 to P1 clarity, assessed mounted. General surface wear to mount, some thinning to shank. Metal standard is untested. Gross weight approximately 2.4gm.
A collection of antique and later dress rings, comprising a green stone and half pearl cluster ring, with pierced and engraved scrolled shoulders, a black enamel and half pearl panel ring, stamped '15', a diamond and red stone gypsy ring, 15ct gold mounted, (one stone deficient), a posy style band ring, with later added cluster panel, and a blue and white stone cluster ring, stamped '9CT', (half pearls untested for origin), first ring size O (5)Approximate gross weights only (metal standards untested): first ring 2.2gm (shank split), second ring 1.6gm, third ring 2.1gm, fourth ring 3.2gm, fifth ring 1.8gm
An amethyst and diamond dress ring, the graduated oval mixed-cut amethysts spaced by trios of round brilliant-cut diamonds, 18ct gold mounted, hallmarked for London 2018, together with an amethyst single stone ring by Catherine Best, signed and stamped '375', ring sizes L and N (2)First ring: General surface wear to mount. One of the central claws has been pushed to the side and some of the other claws are a little worn. Amethysts are well matched with surface wear, scuffs and nicks. Diamonds are well matched, bright and lively, estimated SI1 to SI2 clarity and H to J colour, assessed mounted. Total diamond weight approximately 0.20ct. Hallmarks are clearly struck, maker's mark possibly 'J&P'. Gross weight approximately 4.7gm. Second ring: surface wear, nicks and scuffs to mount and amethyst. Metal standard is untested. Gross weight approximately 4.8gm.
An amethyst single stone dress ring, the oval mixed-cut amethyst in collet setting, above a foliate scroll decorated gallery and shoulders, 18ct gold mounted, ring size QThe mount is of relatively modern manufacture, with splits to the base of the gallery, general surface wear, scuffs and nicks throughout. The amethyst has a light purple hue with surface wear commensurate for use, measuring approximately 19mm length x 16mm width x 10.3mm depth. Hallmarks have patchy wear, the date letter is indistinct and there appears to be no maker's/sponsor's mark. Gross weight approximately 20.5gm.
An 18ct gold half hunter pocket watch by Jump, London, the white enamel dial with Roman numerals and subsidiary seconds dial, to a keyless wind ¾ plate movement, dial and movement signed, the case with blue enamel chapter ring, inscribed to dust cover and monogrammed, numbered 645, accompanied by maker's gilt tooled leather fitted box signed Jump, 93 Mount Street, London, initialled 'H.M.', case diameter 4.85cmScuffs and surface wear to dial and glass. General surface wear, scuffs, scratches and chips/nicks to case, with shallow dings to the sides. Some of the marks are heavily worn and there appears to be no date letter. The cover and case back close fairly tightly. The movement currently runs when wound but is untested for working order, which cannot be guaranteed. Gross weight approximately 101.5gm. Signs of wear to box interior and scuffs/losses to exterior finish, the box cover doesn't close tightly.
A ruby and diamond ring and earrings suite, of matched design, each centred with an oval cabochon ruby in collet setting, within a pavé set surround of round brilliant-cut diamonds, two colour precious metal mounted, the ring stamped '18K', the earrings on post and hinged clip fittings, indistinctly stamped '14', total diamond weight of ring approximately 2ct, total diamond weight of earrings approximately 3.50ct, ring size L½, earrings length 1.65cm (2)Of relatively modern manufacture, with surface wear, scuffs and nicks to all pieces, commensurate for use. One of the earrings has two small chips/splits to the side of the central collet setting. The earring fittings are functioning. Rubies are well matched, of slightly purplish-red hues, heavily included with rutile needles and surface-reaching fissures and fracture inclusions, giving an opaque appearance. The rubies have surface wear and pitting, with scattered scuffs and small chips. Average ruby dimensions approximately 8.6mm length x 6.7mm width (depth of cabochons varies). Diamonds are well matched, bright and lively, some stones with dark mineral and fracture inclusions, occasional stones with surface chips. Estimated SI1 to P2 clarity and mostly H to J colour, assessed mounted. Diamonds graduate from approximately 0.015ct to 0.04ct in size. Metal standard of all items is untested. Gross weights approximately: ring 6.7gm, earrings 9.9gm.
A 19th century memorial brooch, the shaped rectangular panel centred with a plaited hairwork compartment, framed by a black enamel inscription and double row half pearl borders, the reverse with inscription dated 1834, together with a similarly set memorial ring, 18ct gold mounted, (half pearls untested for origin), brooch length 3cm, ring size O (2)Approximate gross weights only: brooch 8.8gm, ring 4.4gm
Loading...
