There are 151062 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribeA COLLECTION OF LATE VICTORIAN CRESTED GLASSWARE, each item engraved with the Crest of the Ogg family originating from Fife and the East Coast of Scotland. The Crest is described in Fairbairn's "Book of Crests" as 'within two arms couped at the shou lders erect and embowed, vested Azure, cuffed Or, holding between the hands a thistle purple, a wreath of oak leaves vert', glass comprised small carafe, 10 x ice plates, 3 x salts and 9 x assorted glasses
An Arts & Crafts oak, marquetry, and brass mounted sideboard, the central section with two pairs of paneled cupboard doors, flanked by two single cupboards with moulded tops and marquetry panel doors, in the manner of Liberty, h. 111 cm, w. 286 cm, d. 49 cm CONDITION REPORT: Two pieces of moulding missing from the top. One piece of plinth missing. Staining and marks to surface. General wear and tear. Item splits into three parts for transport.
Stamps GB, a small but interesting collection of early items to include a Penny Red on part wrapper with clean Burton on Trent 152 Duplex, 1980 Post Office Jubilee, 5 x 1d lilac on cover; two international covers, QV & KEVII postal stationary, a fiscally used item and a 1911 first aerial flight postcard - Sepia colour with London postmark. (13 Items)
Fang reliquary box topped with a figure also two Luba / Hemba Calabash figures, the tallest item measures 39cm high All lots in this Tribal and African Art Sale are sold subject to V.A.T. Therefore £100 hammer price will have Buyers premium on top and also an extra £20 in V.A.T. Condition report: see terms and conditions
Two Yaka figures, Songye Nkisi and rattle, Luba/Hemba rattle and a panel, and a Fang box, the tallest item measures 33cm high All lots in this Tribal and African Art Sale are sold subject to V.A.T. Therefore £100 hammer price will have Buyers premium on top and also an extra £20 in V.A.T. Condition report: see terms and conditions
Collection of items, to include an unusual Lobi pipe, two other pipes one modelled as an aeroplane, a flute and another hollow figure, the largest item measures 26cm high All lots in this Tribal and African Art Sale are sold subject to V.A.T. Therefore £100 hammer price will have Buyers premium on top and also an extra £20 in V.A.T. Condition report: see terms and conditions
Collection of items carved in various tribal styles, to include a heddle pulley, small figure, comb, pot lid, equestrian figure, a root or burr wood mask, and a carving of a figure in a bed. the largest item measures 18cm high All lots in this Tribal and African Art Sale are sold subject to V.A.T. Therefore £100 hammer price will have Buyers premium on top and also an extra £20 in V.A.T. Condition report: see terms and conditions
Two Bar Egypt & Sudan Campaign Medal Group Awarded to Private S Davis Army Hospital Corps, consisting of Egypt & Sudan 1882-89 with clasps The Nile 1884-85 and Kirbekan, named in the correct style “4995 PTE D DAVIS AHC” and 1882 Khedives star. The medals have been mounted in a glazed wooden frame along with a Victorian crowned shako badge, cast white metal martingale badge and Medical Staff Corps brass badge (possibly reproduction). Frame measures 39cm x34cm. Frame has not been opened to inspect the reverse of any item.
WW2 British Military Issue “Dirty Dozen” Manual Wind Wristwatch by Record, black dial with broad arrow stamp, second hands dial to the lower section. Stainless steel casing with broad arrow stamp to the reverse and W.W.W L26982 544829. Circular hole to the Perspex front and scratches. Item appears to be working however we would advise all interested parties to view the item in person. Item sold as a collectors item only and not as a working instrument.
Hier Spricht die NSDAP Enamel Sign / Plaque, being a fine example of the black enamel square sign with white enamel NSDAP style eagle to the centre, red and white writing to the centre of the sign. Some enamel loss and rusting to the edges, corners and top section of the sign. Item displays well. Measures 66cm x 81cm.
WW2 British Airborne Forces Combat Worn Leather Strap Paratroopers Combat Helmet, superb untouched example of an Airborne forces combat helmet. This example retains its original camouflage net which has been damaged by a bullet / shrapnel damage which has cut through and pierced the top of the shell and cut through the top of the steel helmet. Inside the helmet is the original liner with the leather sweatband being stamped BMB 1943 and with size mark 7 3/8. The early leather straps are complete but show some wear and cracked in places. Helmet is dusty and untouched. Item was recently discovered and has never been offered on the market before. A fantastic example of a British paratrooper combat helmet which has seen combat.
Kriegsmarine Coastal Artillery Greatcoat, green woollen double breasted greatcoat with large collar and slash lower pockets. Olive green painted Kriegsmarine issue buttons with single embroidered shoulder strap. Turn back cuffs and false belt section to the reverse. Original half grey cloth lining to the interior. Some service wear, moth damage and some buttons missing. Ideal item for display.
Scarce 20th Middlesex (Artists) Rifle Volunteers Officers Field Service Cap, grey cloth body with white piped top section, curtain piped in silver twist wire, silver wire knotted central ball with silver (not hallmarked) rifle volunteers strung bugle and two white metal buttons with the Mars and Minerva heads with scroll underneath having Artists within. Interior with Hawkes & Co tailors mark. Some service wear to the interior but a very scarce item of headdress.
Rare Swastika Section Removed From Focke-Wulf 190 (FW-190), black painted swastika with white border on green / blue aluminium panel. Factory produced rivet holes across a section of the panel. Reverse of the panel with stud marks. Crudely cut out example. Measures 47cm x 47cm. These items were popular souvenirs taken at the end of WW2 when RAF Squadrons were based at German air fields, many aircraft were scrapped and as a result items like this were cut from the sections and mounted in mess halls and ATC halls. Vendor states that the section is from the Starboard side of the FW-190 tail fin. And due to not having any black border around the white section of the swastika, this dates the item to 1944-45. The item has been in a personal collection for the last 40 years and has never before been offered on the collectors market. Vendor states that the section was removed from an ATC hall in Kent during the late 1960’s / early 1970’s. The Focke-Wulf 190 was a single seater fighter aircraft designed by Kurt Tank. It was introduced into service in 1941 and was the favoured aircraft of many Luftwaffe fighter pilots. The aircraft was used by Fighter Squadrons as a Day Fighter, Fighter Bomber, Ground Attack aircraft and as a Night Fighter.
Scarce Limited Edition[Casement (Sir Roger)] Singleton-Gates (P.) & Girodias (M.) The Black Diaries, An Account of Roger Casement's Life and Times with a collection of his Diaries and Public Writings. Thick roy 8vo L. (The Olympia Press) 1959. First Lim. Edn. No. 1493 (1500). Profusely illustrated, orig. cloth, & d.w. prospectus & another item loosely inserted. (1)
Harbison, Potterton & Sheehy, Irish Art and Architecture, lg. 4to L. 1978; Curran (C.P.) Dublin Decorative Plasterwork, folio L. 1967; Mc Donnell (Joe) Irish Eighteenth - Century Stuccowork.. lg. 4to D. 1991; Casey (C.) Lucey (C.) Decorative Plasterwork in Ireland and Europe, D. 2012; Williams (J.) A Companion Guide to Architecture in Ireland, D. 1994; & 1 other item. (6)
Co. Kilkenny: Valuation of Tenements, Barony of Crannagh, Unions of Callan, Kilkenny, and Urlingford, Barony of Shillelogher, Union of Kilkenny & Barony of Knocktopher, folio 1850, hf. cloth; Census of Ireland, 1881, Province of Leinster - County & City of Kilkenny, folio D. 1881, blue wrappers; & 1 other item. As a lot. (3)
Co. Cork: Early document on paper, dated October 1703, and signed by William and Charles Fitzgerald confirming that they have received the sum of £250 from Edward Riley for renouncing any claim on the lands of Glynane Condon and Ballyfin in Co. Cork. An attractive and frameable early item, with various seals, one depicting a sower and the motto AV Plus Fidelle ('to the most faithful'). As a m/ss., w.a.f. (1)
[O'Kelly (Sean T.)] A white metal cigarette Case, hallmarked and with engraved inscription, "To my friend Sean T. O'Ceallaigh from Frank P. Walsh, Paris, June 6th 1919" Scarce. (1)* Frank P. Walsh was one of three delegates from the American 'Friends of Irish Freedom who arrived in Paris in April 1919, with the aim of helping the Irish delegates (headed by Sean T. O'Ceallaigh) to obtain a hearing at the Peace Conference following the First World War. They were not successful in that aim, but generated much helpful publicity for the Irish cause. They received passports in the name of the Irish Republic from Sean T., who was the Republican envoy to the Peace Conference. Frank Walsh was a distinguished American politician, a former chairman of the U.S. National War Labour Board. An important association item. (1)
Irish National Aid & Volunteers Dependants Fund: Catalogue of Gift Sale.. at the Mansion House Dublin 20th - 21st April, no year (but probably 1917), with Adelaide Street, loosely inserted, 8vo, D. (W. Warren) ptd. wrappers. V. good. (1)* Interesting ephemeral item, listing some wonderful Irish Historical Items, to include Robert Emmett's Wallet, and also the block on which he was beheaded etc.
British Parliamentary Papers: Irish University Press Reprints, Population - The Census of Ireland, 1841, Vols. 2, & Vols. 12, 13, 14, 1851 Census, together 4 vols. folio Shannon 1968 - 1970, mor. backed; also Post and Telegraphs, Vols. 6 & 7, 2 vols. folio Shannon 1971, full cloth; & 1 other item, a reprint. (7)
Autographed Copy[Stack (Austin)] Gaughan (J. Anthony) Austin Stack: Portrait of a Separatist, 8vo D. (Kingdom Books) 1977. First Edn. Signed by Author, illus. cloth, & d.w. Very good copy. (1)* With an original photograph of Stack & his wife in their garden, which features in the book, and another item loosely inserted. Scarce. (1)
ALIEN RESURRECTION (1997) - Dr Wren (J.E. Freeman) Animatronic Bust A bust of Dr. Wren (J.E. Freeman) used in Jean-Pierre Jeunet’s sci-fi horror sequel Alien: Resurrection. The USM Auriga’s lead scientist met an unusual death courtesy of Purvis’ (Leland Orser) chest-burster aboard mercenary ship the Betty, a special effects bust facilitating the gruesome special effect. The upper body torso has no arms and is constructed from dense foam and dressed with a red long sleeved top under a green jumper, covered with copious prop blood. The silicone face is set in a screaming expression and also features faux-blood and hand-punched hair. It rests on a hollow fibreglass shell with a hole through the forehead and back of the skull. Inside are remnants of the mechanical device used to thrust the chest-burster (not present). It remains in good condition with some small tears to the silicone around the forehead. Dimensions: 30 cm x 55 cm x 60 cm (12" x 21 ½" x 23 ½") As this item contains mechanical components, every effort has been made to describe them accurately; however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance. VAT Status - Margin
INDIANA JONES & THE KINGDOM OF THE CRYSTAL SKULL (2008) - Irina Skalko’s (Cate Blanchett) Stunt Pistol Irina Skalko’s (Cate Blanchett) Kotare TT-33 stunt pistol from Steven Spielberg’s Cold War action-adventure Indiana Jones and the Kingdom of the Crystal Skull. The Communist agent carried her Kotare pistol throughout the film, with this stunt version used for scenes in which a hero pistol was not required for filming. Made of hard rubber, the pistol is cast from a real Norelco-made TT-33 pistol and features many intricate cast-in details, including full serial numbers and production markings. The weapon is finished in black with red paint for the safety and metallic faux-silver for the breech. The pistol displays some minor wear to the paint finish from production use. Dimensions: 19.5 cm x 3.5 cm x13 cm (7 ¾" x 1 ½" x 5 ¼").Ownership of this item is restricted for UK residents to those who are registered re-enactors, galleries, or individuals in film, television or theatre production. Please inquire for further details. It is solely the buyer’s responsibility to check, prior to bidding, the legal status of this prop within their own country and its importation therein. VAT Status - Margin
IRON MAN 2 (2010) - Light-Up Hammer Drone RT Unit A light-up Hammer Drone RT (repulse transmitter) unit from Jon Favre au’s superhero sequel Iron Man 2. Ivan Vanke (Mickey Rourke) designed miniaturized arc reactors for Justin Hammer’s (Sam Rockwell) drones, while held in a military weapons research facility. Painted in metallic shades of faux-silver, this RT unit is made of resin and is wired with seven LED lights that are powered by a 9-volt battery. The prop is outfitted on the bottom with additional wires used as dressing. The piece shows minor wear due to production use, but remains in very good condition. Dimensions: 20 cmx 18 cm x 6 cm (8" x 7" x 2 ½") As this item contains electronic components, every effort has been made to describe them accurately, however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance. VAT Status - OMEGA
NEVER SAY NEVER AGAIN (1983) - Underwater Flashlight An underwater flashlight from Irvin Hershner’s spy thriller Never Say Never Again. James Bond (Sean Connery) and Felix Leiter (Bernie Casey) used underwater torches when they infiltrated Largo's (Klaus Maria Brandauer) underground facility beneath a desert oasis. This heavy torch features a metallic casing with a ribbed handle bolted to the side. The piece includes a non-functional HECO charger for its rechargeable HECO energy block. The set shows wear to the casing due to production use and age, and remains in fair condition. Dimensions: 39 cm x 13 cm x 17 cm (15½" x 5" x 6 ½") As this item contains electronic components, every effort has been made to describe them accurately; however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance. VAT Status - OMEGA
JAMES BOND: TOMORROW NEVER DIES (1997) - James Bond's (Pierce Brosnan) SFX Flare An SFX flare from Roger Spottiswoode's action-thriller Tomorrow Never Dies. James Bond (Pierce Brosnan) ignites numerous flares while investigating the sunken British frigate, the HMS Devonshire. For safety reasons, the prop department built flares that used air and light to simulate the burning of a real flare. This prop is wired by the production to light-up during water photography and consists of an acrylic rod that has a foam wrapped handle and a rubber cap. The handle includes a strip of yellow tape, and the removable cap is fitted with a metal ring. Protruding from the bottom of the handle is an electrical taped servos switch that leads to a wrapped black cord that fed along Brosnan's body to a hidden power pack. This prop shows minor wear due to production use, but remains in good condition. Dimensions: 20 cm x 33 cmx 5 cm (8" x 13" x 2") As this item contains electronic components, every effort has been made to describe them accurately; however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance. VAT Status - OMEGA
THE MATRIX (1999) - Neo (Keanu Reeves) SFX Bug Insertion Rig A special-effects rig from the Wachowskis’ sci-fi action film The Matrix. The crew used their special effects rig in the scene in which Neo(Keanu Reeves) had a bug planted inside him through his navel by the Agents. Created using a body cast of Reeves for continuity in the scene, the piece is composed of a torso made of fibreglass, with a realistic silicone skin and foam thighs. The skin is finished in natural flesh tones, with hand-punched hairs on the chest and belly. A hole for the bug insertion mechanism is situated at the navel. Mechanical controls attached through the neck allowed the piece to move realistically during filming. A silicone bug skin finished in grey paint is also included, along with a pair of black trousers to complete the presentation. The rig displays some wear to the silicone and the assorted wire controls from use. Dimensions (body): 60 cm x 90 cm x 22 cm (23 ¾" x 35 ½" x 8 ¾") As this item contains mechanical components, every effort has been made to describe them accurately; however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance. VAT Status - Margin TRIANGLE
THE MATRIX (1999) - Close-Up Oversized "Bug" Device An oversized 'Bug' device from the Wachowskis’ sci-fi action film The Matrix. The agents used their Bugs on Neo (Keanu Reeves) as they attempted to discover the whereabouts of Morpheus (Laurence Fishburne). This particular version was created for close-up use. The Bug is made of machined aluminium, with a brass base and spring detailing for the device’s 'tail'. A section of clear plastic reveals electronics within. It has a bare metal finish for the body, with black paint applied to the spring. The spring shows some signs of paint wear and some light corrosion around the brass core, however overall it remains in good condition and is supplied with a Warner Brothers certificate of authenticity. Dimensions: 16 cm x 3 cm x 3 cm (6" x 1 ¼" x 1 ¼") As this item contains electronic components, every effort has been made to describe them accurately; however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance. VAT Status - Margin
MEMENTO (2000) - Leonard's (Guy Pearce) Mementos Leonard's (Guy Pearce) memory aids from the Christopher Nolan Oscar®-nominated thriller Memento. Leonard used his collection of mementos to combat his inability to create new memories, with each item a memory of past events or instructions. The note about Dodd (Callum Keith Rennie) screen matches to the scene in which it is written by Natalie (Carrie-Anne Moss). The set is made up of a Ferdy’s Bar coaster with a motel address written in black ink on the reverse, a note written in black ink on white paper, a Polaroid photo of Dodd with handwritten notes on both sides, a Polaroid photo of Jimmy (Larry Holden) and a pharmacy bag with instructions to meet Natalie. Distressed for use with stains, creases and signs of natural production wear, the set remains in good condition. Dimensions (largest piece): 13 cm x 13 cm (5" x 5") VAT Status - Margin
PACIFIC RIM (2013) - Chuck Hansen’s (Robert Kazinsky) Striker Eureka Jaeger Drivesuit Chuck Hansen’s (Robert Kazinsky) Striker Eureka Jaeger Drivesuit from Guillermo del Toro’s sci-fi adventure Pacific Rim. Hansen’s drivesuit was specifically designed for Hansen to wear when co-piloting the Striker Eureka Jaeger. Drivesuits for the film were designed by Kate Hawley and built by esteemed effects house Legacy Effects, with components of the suit digitally modelled to fit the actor exactly. This suit was designed to reflect the character’s Australian nationality and piloting role, with nozzles and gauges on the left where they would connect to the larger workings of the Jaeger. The drivesuit consists of a fabric body suit with urethane armour components. The neck, codpiece and back spine piece are all made of rubber, with the latter hiding the zip running down the back. The black spandex gloves feature circuit details and a top knuckle light, although these lights and those throughout the suit’s armour are no longer connected to a power source. The boots are trainers encased in a urethane shell, and the entire body is finished with a grey and green camouflage paint scheme featuring unique details, such as the bulldog decal and tally of Kaiju slain. The rear sections of the helmet detach via magnets to facilitate dressing, with the head lights still functional. The helmet’s side air nozzle was removed during production, and replacement production-made components have been installed. The suit includes costume elements named for both Robert Kazinsky and his stunt double, as costume pieces were frequently mixed and matched between suits on set. The suit displays intentional distressing but the components overall remain in good condition. The suit is presented on a custom-made mannequin. Dimensions (displayed): 36 cm x 66 cm x185 cm (14" x 26" x 73") As this item contains electronic components, every effort has been made to describe them accurately; however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance. VAT Status - OMEGA
PALE RIDER (1985) - Clapperboard A clapperboard from Clint Eastwood's western Pale Rider. This clapperboard consists of an acrylic slate with a wood clapper mounted on top with metal hardware. The acrylic slate is painted with black outlined boxes to divide the slate into fields for production, scene, take, director, camera and date. The clapperboard has blue stenciled lettering noting the production as 'PALERIDER', the director as 'C. Eastwood', camera as 'B. Surtees', and the date‘27-9-84'. This item shows minor wear due to production use, with slight scuffs to the paint and wood, however the piece remains in very fine condition. Dimensions: 28 cm x 24 cm x 3 cm (11"x 9 ½" x 1") VAT Status - OMEGA
THE ROCK (1996) - Captain Hendrix's (John C. McGinley) Trembler Device A trembler device from Michael Bay’s action film The Rock. Disenchanted Marine Force Recon Captain Hendrix (John C McGinley) set up his tremblers in Alcatraz prison to prevent infiltration through the sewage tunnels. Movement of the tremblers alerted General Hummel (Ed Harris) to the arrival of Commander Anderson’s (Michael Biehn) SEAL team, resulting in the shower room massacre. Made of metal with a plastic battery housing at the rear, the piece has a plastic ball suspended between two arms. The mounts are spring-loaded, allowing the ball to vibrate when knocked. Wires run from the ball to the battery pack. A non-functioning LED is mounted at the rear. The trembler displays some wear from use, including scratches and marks to the battery pack and spherical core. Dimensions: 6.5 cm x 7.5 cmx 7.5 cm (2 ½" x 3" x 3") As this item contains electronic components, every effort has been made to describe them accurately; however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance VAT Status - Margin
STAR TREK: VOYAGER (1995-2001) - Captain Janeway (Kate Mulgrew) Borg Costume Captain Janeway's (Kate Mulgrew) Borg assimilation costume from the sci-fi television series Star Trek: Voyager. The Captain wore her robotic costume in the season seven episode 'Unimatrix Zero'. After being assimilated by the Borg, Janeway and her crew fought the Borg Queen from within and released a virus into the Collective in order to keep the members of Unimatrix Zero free. The costume is comprised of a leotard worn over a jumpsuit, with matching booties. The biomechanical decoration is made of foam rubber, painted in black, copper and metallic grey hues. All garments have zip closures and the leotard incorporates Velcro to help hide the fastenings. Inside are 'Voyager' labels with 'Kate Mulgrew' written in black ink. A hidden compartment on the back conceals two 9V batteries (not supplied) that power a number of coloured LEDs across the front and back in a flashing sequence. The paint has begun to flake away in the hip area and there are cracks to the paint elsewhere, but otherwise the costume remains in good condition. As this item contains electronic components, every effort has been made to describe them accurately; however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance VAT Status - Margin
STAR TREK: NEMESIS (2002) - Kolaran Rifle A Kolaran rifle from Stuart Baird's Star Trek: Nemesis. This rifle was made for a Kolaran armoured car which pursued Jean-Luc Picard(Patrick Stewart) after he landed on Kolarus III to investigate a mysterious signal. Painted with a dark camouflage, the rifle is made of a variety of materials including foam, resin, and wood. Green fabric and cord has been wrapped around numerous places, including the barrel, top plate and dual grips. This item shows some wear due to production use, with one panel of the top plate broken off, however it remains in good condition. Dimensions: 102 cm x32 cm x 23 cm (40" x 12 ¾" x 9") VAT Status - OMEGA
STAR WARS - EP IV - A NEW HOPE (1977) - Master Replicas Darth Vader Commemorative 18K Gold-plated FX Lightsaber A limited edition 18K gold-plated Darth Vader FX lightsaber created by Master Replicas. One of only fifty in existence, this rare gold-plated lightsaber was issued to key staff members at Master Replicas following their success selling one million Darth Vader Force FX Lightsabers. The replica has a polycarbonate blade permanently attached to a special gold-plated grip, and incorporates motion sensor driven sound-effects powered by three AA batteries. This item, which originates from a former senior member of Master Replicas staff, comes in its original packaging, complete with sealed display mounts and original instructions. This item remains in very good condition. Dimensions: 116 cm x 13 cm x 10 cm (45 ½" x 5" x 4")As this item contains electronic components, every effort has been made to describe them accurately; however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance. VAT Status - OMEGA
STARSHIP TROOPERS (1997) - Federation Corvette Transport Model Miniature and Rodger Young Printed Drafting A Federation Corvette Transport model miniature and printed drafting from Paul Verhoeven’s sci-fi action film Starship Troopers. Named after famed visual-effects artist Greg Jein, this Corvette miniature is made of resin and styrene. Constructed by Sony Pictures Imageworks 'Thunderstone model shop, the miniature has been outfitted with fibre optic cabling which illuminates the ships damage from the Battle of Klendathu. The piece is painted Army green with dark shading around the production distressing, and includes the UCF ID number 193 on both sides of the front of the ship. The model includes a support beam fixed to the side of the ship where it was mounted during production. Paired with the model are two pieces of printed drafting of the Rodger Young Corvette Transport. The drafting shows the famed ship from all angles, with each piece of drafting made of two pages taped together at the centre. The set shows minor wear due to production use and age, but remains in fine condition. Miniature dimensions: 33 cm x 51 cm x 22 cm (13" x 20" x 8 ½"); drafting dimensions: 53 cm x 43 cm x 1 cm (21" x 17" x ¼")As this item contains electronic components, every effort has been made to describe them accurately; however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance. VAT Status - OMEGA
SUDDEN IMPACT (1983) - Clapperboard A clapperboard from Clint Eastwood's action-thriller Sudden Impact. This clapperboard consists of an acrylic slate with a wood clapper that is mounted on top with metal hardware. The acrylic slate is painted with black outlined boxes to divide the slate into fields for production, scene, take, director, camera and date. It has both painted black stencilled lettering and dry erase notation, indicating the production as 'Sudden Impact', the scene '768', director 'Clint Eastwood', camera 'Bruce Surtees’ and the date '17 June 1983'. This item shows minor wear due to production use with slight scuffs due to the dry erase markings and wood, however the piece remains in very fine condition. Dimensions: 28 cm x 24 cm x 3 cm (11" x 9 ½" x 1") VAT Status - OMEGA
TEAM AMERICA: WORLD POLICE (2004) - Remote-Control Team America Hummer H2 A remote-control Team America Hummer H2 vehicle from Trey Parker’s Team America: World Police. This bespoke remote-control miniature car is one of the smaller scale vehicles created for the production, and resembles a heavily armoured Hummer H2. This version was made for the chase sequence in Cairo, and features half-body action figures of Chris in the driver seat and Joe in the passenger seat. The piece is painted in colours representational of the red, white and blue of the American flag, and includes white stars as sticker logos. The R/Ccar has guns at the front, roof-mounted rockets, and rocket boosters on the sides of the vehicle. The piece has red and blue alarm lights attached in front of the sun roof, which are powered by a 9-volt battery. This version of the Team America Hummer does not have attached license plates, and the rockets do not feature the Team America logo. Paired with the car is a 1.4GHZ transmitter and an Onyx200 battery charger. The lot shows some wear due to production use, but overall remains in good condition. Car Dimensions: 23 cm x 51 cm x 22 cm (9" x 20" x 8 ½"); remote control dimensions: 9 cm x 14 cm x 28 cm (3 ½" x 5 ½" x 11"); charger dimensions: 23 cm x 11 cm x 5 cm (9" x 4 ½" x 2")As this item contains electronic components, every effort has been made to describe them accurately; however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance. VAT Status - OMEGA
TERMINATOR 3: RISE OF THE MACHINES (2003) - Full Size T-X Endoskeleton A full size T-X endoskeleton from Jonathan Mostow’s sci-fi action film Terminator 3:Rise of the Machines. The T-X was the villain of the film, sent by Skynet to destroy the members of the Human Resistance. It was a highly intelligent and formidable adversary that was able to reprogram other machines, as well as effectively kill humans. This unique full body endoskeleton, made by Stan Winston Studios, was the only one created for the production. Stan Winston Studios was a well-known special effects company that worked on many Hollywood blockbusters including Jurassic Park and Aliens, and they participated in the creation of all the cyborg machines throughout the original Terminator series. This piece was also exhibited in the Studio’s display room. The T-X is a female skeletal form, constructed from black, chrome-impregnated resin that covers a steel and aluminium cable controlled armature. It displays plastic and metal pipes and hydraulics throughout to give a realistic machine resemblance, as well as a skull-like head with slanted eyes and a hinged jaw. It features blue LED lights in the eyes, torso and left arm that are controlled by an external power pack with a worldwide power adaptor. The left arm’s LEDs fire sequentially to create a pulsing effect. The right arm has a four-pronged 'hand', which was one of the weapons made available to the T-X. The endoskeleton displays intentional production distressing throughout, with painted rust details, scratches and scuffs. It shows signs of minor wear, and repairs are evident on the right arm prongs where glue residue is present. The T-X comes on a custom-made display stand. It is accompanied by a 12" x 8" lobby card used in the promotion of the movie. Dimensions: 61 cm x 61 cm x192 cm (24" x 24" x 75 ½")As this item contains electronic components, every effort has been made to describe them accurately; however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance. VAT Status - Margin
TERMINATOR 3: RISE OF THE MACHINES (2003) - T-X (Kristanna Loken) Animatronic Arm The T-X's (Kristanna Loken) animatronic arm from director Jonathan Mostow’s sci-fi action sequel Terminator 3: Rise of the Machines. The T-X used her arm device to override and control other electronic systems and machines throughout the film. Made by Stan Winston Studios, the realistic arm is made of silicone, with metal rod reinforcement and internal support for the joints in the hand. The robotic fingertip, which has a screw fitting 'spike’ extension that attaches to the end, contains blue LEDs. Cables run from the arm to control units allowing control of blue LEDs in the finger, the motor and life-like movement in the index finger and wrist. The silicone shows signs of age throughout, with impression marks, paint wear and small tears. Are paired tear on the upper arm has traces of glue residue that remains sticky. The piece comes in an original production-used carry case with Stan Winston Studios markings. Dimensions(arm): 73 cm x 9 cm x 9 cm (28 ¾" x 3½" x 3 ½")As this item contains electronic components, every effort has been made to describe them accurately; however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance. VAT Status - Margin
VAN HELSING (2004) - Van Helsing's (Hugh Jackman) Hero Functioning Crossbow Van Helsing's (Hugh Jackman) hero crossbow from Stephen Sommers’ horror adventure film Van Helsing. Van Helsing was given his gas-powered automatic crossbow by its inventor Friar Carl (David Wenham), and used it in his battle with the brides of Dracula (Richard Roxburgh), killing the vampire Marishka (Josie Maran) after dipping its arrows in holy water. The intricately made weapon was produced by Applied Effects and features a machined-metal body with fold-out plastic bow arms, wooden grips and resin ram’s head detailing. Additional resin detailing is applied to the butt stock’s faux-gas tank and along the bow arms, with metal crosses in the pistol grip. The crossbow’s drum magazine is made of metal and plastic, with individually finished and fixed arrows within. The bow strings are bound together and finished to look like taut, wound leather. Fully functional, the chain-driven action is powered by a 12-volt battery located in the butt stock, which powers the weapon through a connector between the stock and the pistol grip. Pulling the trigger drives a chain which simulates the firing of the bow string, with the spring-loaded magazine rotating with each movement of the action. The weapon disassembles into three components with folding bow arms and sights. The weapon displays only minor scratches to the metal body through use on the production and is supplied in its own custom-made transit case. . It is accompanied by a 16" x 11" poster used in the promotion of the movie. Dimensions (assembled): 90 cm x 81 cm x 27 cm (35.5" x 32" x 10 ¾")As this item contains electronic components, every effort has been made to describe them accurately; however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance. VAT Status - Margin
CHARLIE AND THE CHOCOLATE FACTORY (2005) - Packaged Wonka Bars A box of Wonka bars from the fantastical adaption of Charlie and the Chocolate Factory directed by Tim Burton. Boxes of Wonka bars were used early in the film as people around the world embarked on a hunt for the five elusive Golden Tickets. The box itself is made from cardboard featuring four colourful sides each displaying the 'Wonka' logo. Inside the box are twelve wrapped Wonka bars including nine Triple Dazzle Caramel, two Whipple-Scrumptious Fudgemallow Delight and one Chilly Chocolate Creme. Each bar is made of brown plastic and features a 'Wonka' stamp on the individual chocolate pieces. The bars are wrapped in silver foil with colourful wrappers and feature a printed seal reading "Win a trip to Wonka's Chocolate Factory" and nutritional facts and ingredients on the back. The box displays slight scuffs to the corners due to use, however overall the set remains in very good condition. Dimensions(box): 19.5 cm x 17.5 cm x 9.5 cm (7 ½" x 6 ¾" x 3 ¾")This lot is supplied with a Warner Bros. certificate of authenticity in place of a Prop Store certificate. Payment plan on this item is restricted to a duration of one month. Please contact us for further information. VAT Status - DAGGER
CHARLIE AND THE CHOCOLATE FACTORY (2005) - Set of Wonka Bars A set of Wonka bars from the fantastical adaption of Charlie and the Chocolate Factory directed by Tim Burton. Wonka bars were used during early scenes as people around the world frantically hunted for the five elusive Golden Tickets. The set is comprised of an unwrapped Wonka bar and three wrapped Wonka bars, including a Whipple-Scrumptious Fudgemallow Delight, Chilly Chocolate Creme and a Triple Dazzle Caramel. Each bar is made of brown plastic and features a 'Wonka' stamp on the individual chocolate pieces. The bars are wrapped in silver foil with colourful wrappers featuring a printed seal reading "Win a trip to Wonka's Chocolate Factory", and the back of the wrapper shows printed nutritional facts and ingredients. Each bar remains in very good condition. Dimensions (per bar): 19 cm x 9 cm x 1.5 cm (7 ½" x 3 ½" x ¾")This lot is supplied with a Warner Bros. certificate of authenticity in place of a Prop Store certificate. Payment plan on this item is restricted to a duration of one month. Please contact us for further information. VAT Status - DAGGER
CHARLIE AND THE CHOCOLATE FACTORY (2005) - Wonka Factory Bike A Wonka factory bike from the fantastical adaption of Charlie and the Chocolate Factory directed by Tim Burton. Wonka factory workers rode bikes as they posted signs announcing Willy Wonka’s (Johnny Depp) contest allowing the finders of five Golden Tickets a tour of his legendary chocolate factory. Based on a modified VéloSoleX motorised bicycle, the bike displays a bright red frame and fender skirts, with a small two-stroke engine located at the front. The bike features a black leatherette seat and distinctive white Wonka 'W' vinyl decals located on either side of the back fender, with a small yellow Wonka-branded license plate reading '3' secured to the rear. A metal tin filled with resin to imitate the appearance of glue is secured to the top of the back fender, with a wooden paintbrush held within it. While the bike is in motion, the pedals operate a small motor which allows the glue tin to rotate in a circle. The left-side Wonka decal is coming away slightly from the fender, however overall the bike remains in good condition. Dimensions: 165 cm x 46 cm x 107 cm (65" x 18 ¼" x 42 ¼")This lot is supplied with a Warner Bros. certificate of authenticity in place of a Prop Store certificate. Payment plan on this item is restricted to a duration of one month. Please contact us for further information. The bike is sold in a static ‘rolling only’ condition and is drained of all fluids. As this item contains electronic components, every effort has been made to describe them accurately, however no guarantee or warranty is made as to the functionality or lifespan of those components. It is entirely incumbent on the new owner to satisfy themselves as to their use and maintenance. VAT Status - DAGGER
BATMAN BEGINS (2005) - Batman's Batsuit Batman's Batsuit from the superhero action film Batman Begins, directed by Christopher Nolan. Bruce Wayne (Christian Bale) wore his Batsuit as he battled the Scarecrow (Cillian Murphy) and his mentor, Ra’s al Ghul (Liam Neeson), to save Gotham City from destruction. In the film, the Batsuit was created from mothballed military research equipment housed in the Applied Sciences Division of Wayne Enterprises, run by Lucius Fox (Morgan Freeman), who helped update the design. The design was superseded by a refined Batsuit in The Dark Knight. The costume was designed by Academy Award®-winner Lindy Hemming, with cowl and armour sculpts by Julian Murray. The design of the suit drew inspiration from more recent comic iterations of the Dark Knight’s iconic costume, though the construction was very similar to previous film iterations created under Tim Burton and Joel Schumacher. The cowl was specifically sculpted to fit Bale’s face as snugly as possible, while the cloak was designed to flutter lightly behind Batman as he moved. Hemming would later receive a BAFTA Award®-nomination for her contribution to The Dark Knight. The costume’s key components are Batman’s trademark cowl (marked'194' internally), and a body suit made up of figure-hugging torso armour and separate leg and abdominal armour cast over a mesh-fabric leotard with zip-up stirrups. A groin piece with a box fitted to protect the performer during the film’s fight sequences was worn under the rubber utility belt(marked 'Buster rubber' internally), which is finished in faux-brass paint and secured with cable ties at the rear. A lightweight faux-velvet cape is secured to the costume’s chest. The bracers – both left-handed versions– are made of black vinyl, with rubber blades along the forearms. Both the torso armour and belt are emblazoned with the signature bat symbol. A pair of rubber gloves and black leather boots (size 9) complete the outfit. The costume displays some wear from use and age, with small cracks and tears present in the foam rubber of the cowl and upper body armour, and some loose stitching on the left glove. The Batsuit is presented on a mannequin for display purposes. This lot is supplied with a Warner Bros. certificate of authenticity in place of a Prop Store certificate. Payment plan on this item is restricted to a duration of one month. Please contact us for further information. VAT Status - DAGGER
THE DARK KNIGHT RISES (2012) - Gotham Rogues Uniform A Gotham Rogues player uniform from the action film The Dark Knight Rises, directed by Christopher Nolan. The Rogues’ players wore their uniforms in the game against Rapid City Monuments that was explosively interrupted by Bane (Tom Hardy) and the League of Shadows. Made by Under Armor, the uniform consists of a yellow, silver and black Rogues jersey with number 53 and the name ‘Palmer’ on the back (XL); a pair of matching trousers(3XL) with belt and towel; a pair of cleats (UK size 9 and 11 ½); gloves; game socks and sweatbands. Douglas body armour is worn under the jersey, with a helmet made by Schutt. An unworn long-sleeved shirt (2XL) is also included. The costume displays light wear with marks and stains on the gloves. This lot is supplied with a Warner Bros. certificate of authenticity in place of a Prop Store certificate. Payment plan on this item is restricted to a duration of one month. Please contact us for further information. VAT Status - DAGGER
THE DARK KNIGHT RISES (2012) - Gotham City Police Department Badge A Gotham City Police Department badge from the action film The Dark Knight Rises, directed by Christopher Nolan. GCPD badges were a key element of Gotham Police uniforms as they battled the forces of Bane (Tom Hardy) and the rejuvenated League of Shadows. The GCPD badge is finished in metallic faux-silver paint and mounted on a plastic backing board with a medal bar, enamelled in red, blue and white with the number ‘1986’ at the centre, fitted above. A safety pin is hot glued on the reverse to secure the pinto the officer’s uniform. The badge displays some scratches to the medal bar from use. Dimensions: 2.5 cm x 6 cm x 10 cm (1"x 2 ½" x 4")This lot is supplied with a Warner Bros. certificate of authenticity in place of a Prop Store certificate. Payment plan on this item is restricted to a duration of one month. Please contact us for further information. VAT Status - DAGGER
Loading...
![Scarce Limited Edition[Casement (Sir Roger)] Singleton-Gates (P.) & Girodias (M.) The Black Diaries, An Account of Roger Case](https://cdn.globalauctionplatform.com/00da67b0-260a-42d6-827a-a67800aa4360/552acd4f-9ea1-4754-a97f-a67b00b50ddb/468x382.jpg)
![[O'Kelly (Sean T.)] A white metal cigarette Case, hallmarked and with engraved inscription, "To my friend Sean T. O'Ceallaigh](https://cdn.globalauctionplatform.com/00da67b0-260a-42d6-827a-a67800aa4360/da068fbf-cc57-4b1c-a502-a67b00b73943/468x382.jpg)
![Autographed Copy[Stack (Austin)] Gaughan (J. Anthony) Austin Stack: Portrait of a Separatist, 8vo D. (Kingdom Books) 1977. Fi](https://cdn.globalauctionplatform.com/00da67b0-260a-42d6-827a-a67800aa4360/2166b0c3-7e9a-449c-baa3-a67b00b54a30/468x382.jpg)
