WESTLEY RICHARDS A 12-BORE BOXLOCK EJECTOR, serial no. 15208, circa 1895, 30in. nitro reproved fine damascus barrels, the rib engraved 'WESTLEY RICHARDS. 170. NEW BOND ST. LONDON.', and '1' at the breech end, 2 1/2in. chambers, the extractors individually serial numbered, bored approx. true cyl. choke in both, scroll-back treble-grip action, Westley Richards patent toplevers engraved 'WESTLEY RICHARDS PATENT EJECTOR' and '1', automatic safety with gold-inlaid 'SAFE' detail, the action flats marked with ANSON & DEELEY'S PATENT' use number 13491, and 'DEELEY'S PATENT EJECTOR' use number 4883 (for Deeley patent ejector No. 4289 of 26th March 1886), fine acanthus scroll engraving with ornate bordering, retaining very slight traces of colour-hardening and finish, the triggerguard with a small game scene of a hare darting, 14 3/4in. figured stock, fore-end with Deeley & Edge patent release catch and horn finial, weight 6lb. 7oz.. S2 - Sold as a Section 2 Firearm under the 1968 Firearms Act
We found 116099 price guide item(s) matching your search
There are 116099 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
116099 item(s)/page
WESTLEY RICHARDS A 12-BORE TOPLEVER SINGLE-BITE SNAP-ACTION BAR-IN-WOOD HAMMERGUN, serial no. 11916, circa 1870, 30in. nitro reproved damascus barrels, the rib engraved 'PATENT. WESTLEY RICHARDS. 170 NEW BOND ST. LONDON.', 2 3/4in. chambers, bored approx. true cyl. in both, Westley Richards patent toplever, non-rebounding sidelocks with dolphin hammers of pinfire form, bar-in-wood, the fore-end meeting at the knuckle in a crab joint, border and partial scroll engraving, 14 1/2in. stock with 1/2in. wooden extension and steel buttplate, fore-end with crosspin release and sculpted horn finial, weight 7lb. 1oz.. S2 - Sold as a Section 2 Firearm under the 1968 Firearms Act
WILLIAM POWELL & SON A 12-BORE 1864 PATENT BAR-IN-WOOD LIFT-UP TOPLEVER ROTATING SINGLE BOLT SNAP-ACTION HAMMERGUN, serial no. 5083, circa 1873, 30 1/8in. black powder reproved damascus barrels, the rib engraved 'WILLIAM POWELL & SON. 13 CARRS LANE. BIRMINGHAM.', 2 1/2in. chambers, bored approx. true cyl. choke in both, action incorporating William Powell patent lift-up toplever, patent no. 1163 of 7th May 1864, use number 1368, carved percussion fences, broad strikers, bar-in-wood, rebounding sidelocks with flat sided hammers, border engraving, 14 1/4in. stock including steel buttplate (crack at hand), fore-end with cross-pin release catch and horn finial (chipped), weight 7lb. 1oz.. S2 - Sold as a Section 2 Firearm under the 1968 Firearms Act
WESTLEY RICHARDS A 12-BORE 1865 PATENT BAR-IN-WOOD TOPLEVER HAMMERGUN, serial no. 4615, circa 1870, 30in. nitro reproved damascus barrels, the rib engraved 'PATENTED OCTOBER 10TH 1865. WESTLEY RICHARDS & CO. LONDON.', 2 1/2in. chambers, bored approx. true cyl. choke in both, single-bite snap action with Westley Richards patent toplever, removable striker bars, flat stamped 'Patent 1211', rebounding sidelocks with dolphin hammers, bar-in-wood, the fore-end meeting at the knuckle in a crab joint (with insert repair), bold acanthus scroll engraving, bright and blued finish, 14in. well figured stock (cast on for the left shoulder) including steel buttplate, Deeley and Edge patent fore-end release catch, horn finial, weight 7lb. 8oz.. S2 - Sold as a Section 2 Firearm under the 1968 Firearms Act
A JAPANESE NAGINATA POLEARM, circa 1800, with curving 18in. blade signed on both sides of the tang, false edged to the majority of the back edge, short 'hi', the blade darkly stained but with visible 'hamon' extending around the 'kissaki', single 'mekugi-ana' to the 17 1/4in. tang, copper 'habaki', small oval iron 'tsuba' and fitted with a faceted wood shaft decorated in crushed mother of pearl at the head, copper mounts and carved finial to the tail, approx. 104in. overall. This bladed product is not for sale to people under the age of 18. By bidding on this item you are declaring that you are 18 years of age or over.Please be aware that we are unable to send edged weapons or bladed products by postal courier to a UK residential address (Offensive Weapons Act 2019)
A JAPANESE NAGINATA POLEARM, the blade possibly pre 1800, the curving 15 3/4in. blade signed on left side of the tang, false edged to the majority of the back edge and darkly stained, two 'mekugi-ana' to the 6 1/2in. tang, copper 'habaki' (traces of silvering), small oval iron 'tsuba' and fitted to a black laquered oval wood shaft of late Edo period decorated in crushed mother of pearl at the head, copper mounts, painted 'mon' to both sides near lower mount and carved finial to the tail, approx. 97 3/4in. overall. This bladed product is not for sale to people under the age of 18. By bidding on this item you are declaring that you are 18 years of age or over.Please be aware that we are unable to send edged weapons or bladed products by postal courier to a UK residential address (Offensive Weapons Act 2019)
A GERMAN PRE WORLD WAR TWO NATIONAL HUNTING ASSOCIATION TYPE KNIFE, STANDARD MODEL, UNSIGNED, circa 1937, with 13 1/2in. single-edged blade etched on the right side with running deer in a woodland setting together with standing stags and hunting dogs, the reverse similar but with running stags and standing boar and deer, silver plated shell guard, cross-guard moulded in the form of hooves turned forwards and aft, natural stag grip, the front with applied National Hunting Association silver emblem, carved pommel-cap with moulded acorn finial, complete with its blue-green leather scabbard with silver plated mounts and acorn shaped frog button, the chape mount engraved 'JAGDKLUB HANNOVER WURFTAUBENSCHIESSEN, 9.5.37' (possibly added later), 20 1/4in. overall in scabbard. This bladed product is not for sale to people under the age of 18. By bidding on this item you are declaring that you are 18 years of age or over. Please be aware that we are unable to send edged weapons or bladed products by postal courier to a UK residential address (Offensive Weapons Act 2019)
A 12-BORE FLINTLOCK BRASS-BARRELLED BLUNDERBUSS, UNSIGNED, no visible serial number, English circa 1790, with plain round 11 7/8in. thick-walled brass barrel, moulded band at breech, London proofs and obscured maker's mark, squared iron solid top-tang, plain iron bevel-edged lock with swan-necked cock and semi rainproof pan, roller frizzen-spring, walnut full-stock coarsely chequered at the wrist (losses to wood around lock and rear of tang, cracks and repairs along fore-end with further small losses), plain brass furniture with triple-stepped top-spur to heel-plate, rolled edges to the trigger guard, acorn finial and replacement ramrod, weight approximately 5 1/2 lbs., overall length 27 1/4in..
KETLAND & CO, LONDON A 16-BORE FLINTLOCK IRON-BARRELLED BLUNDERBUSS WITH SPRUNG-BAYONET, no visible serial number, circa 1795, with banded octagonal to round 13 5/8in. barrel, flared and banded muzzle, the top left hand side-flat at breech with London proofs and 'T.K.' maker's mark, folding triangular form fluted bayonet mounted to top of barrel and released via a pull-back catch on the tang, flat, slightly curved lock with stepped tail and signed 'KETLAND & CO.' in script below the pan, no roller to frizzen spring, swan-necked cock, walnut hand-rail full-stock, brass furniture including heel-plate with top-spur, double roll-edged guard with acorn finial and ramrod throat and pipe, original horn tipped wood ramrod with worm end, weight approximately 5 1/2lbs., overall length 29 1/4in..
BASS, LONDON A 20-BORE FLINTLOCK BRASS-BARRELLED BLUNDERBUSS PISTOL WITH SPRUNG BAYONET, no visible serial number, circa 1815, with banded octagonal to round 8in. barrel, flared and banded muzzle, the top-flat at breech signed 'LONDON', folding triangular form fluted bayonet mounted to top of barrel and released via a pull-back catch on the tang, Birmingham proofs, flat, slightly curved bevel-edged lock with stepped tail and signed 'BASS' below the pan, sliding safe behind the swan-necked cock, roller frizzen spring, walnut full-stock with smooth bag-shaped butt, brass furniture including double roll-edged guard with acorn finial and brass tipped wood ramrod, weight approximately 2 1/8lbs., overall length 13 3/4in..
G & J DEAN, LONDON A FINE 16-BORE PERCUSSION DOUBLE-BARRELLED SPORTING-GUN, serial no. 6201, circa 1852, with expertly rebrowned 30in. damascus barrels signed on the top-rip 'GEORGE & JOHN DEAN, 30 KING WILLIAM ST. LONDON BRIDGE', engraved border and detail to the colour hardened breech-block, fully scroll engraved top-tang, border and scroll engraved bar-action locks signed by the maker and featuring hunting dogs to both sides and retaining strong amounts of possibly renewed colour, border and scroll engraved dolphin-headed hammers, walnut half-stock chequered at the wrist, engraved iron furniture, the top-spur of heel-plate engraved with a further hunting dog, engraved pineapple finial and complete with its original brass-mounted ebony ramrod, 46in. overall.
W. PARKER, LONDON A .650 PERCUSSION HEAVY OVERCOAT PISTOL OF CONSTABULARY FORM FOR RENOVATION, serial no. 62, circa 1800 with later conversion to percussion via drum & nipple, 4 1/2in. octagonal barrel with applied fore-sight and traces of a London address, solid top-tang, large screwed plug to the drum (nipple damaged, drum out of line), flat lock with radiused tail and signed 'W. PARKER' below the drum, removed safe behind the slab-sided replacement hammer (mainspring at fault), walnut full-stock with semi slab-sided bag-shaped butt (cracks and losses to left side of fore-end), brass furniture, the trigger-guard bow engraved 'DISM'D HORSE PATROLE', the pineapple finial engraved '62' and replacement ramrod, overall length 10in., weight approximately 1 1/4lbs..
G. BATES AN 8-BORE SINGLE-BARRELLED SIDELOCK NON-EJECTOR, serial no. 3457, circa 1895, 37 3/8in. nitro reproved bold damascus barrel, short sight rib engraved 'G. BATES. EASTBOURNE.' (rubbed), 4 1/4in. chamber, bored approx. full choke, treble-grip action, automatic safety, cocking-indicator, border engraving, the sideplate with a pond scene of duck and bullrushes with beaded bordering, bright and blued finish overall (possibly nickel-plated), 14 1/4in. figured pistolgrip stock with steel pistolgrip-cap and including 1in. rubber recoil pad, fore-end with grip-catch release and horn finial, weight 11lbs. 12oz.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
J. & W. TOLLEY AN 8-BORE SINGLE-BARRELLED ROTARY-UNDERLEVER HAMMERGUN, serial no. 6907, circa 1890, 32 7/8in. nitro reproved bold damascus barrel engraved 'J. & W. TOLLEY. MAKERS. 1. CONDUIT ST. REGENT ST. LONDON.', and with wave cut short sight rib, treble-grip action with Jones patent rotary underlever, carved percussion fence, rebounding back-action lock, border engraving, reblued furniture, 13 3/4in. semi-pistolgrip stock with domed horn pistolgrip-cap and 3/4in. rubber recoil pad, fore-end with Deeley & Edge patent release and horn finial, weight 8lbs. 8oz.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
WESTLEY RICHARDS & CO. A .577 (3IN.) CORDITE 'MODEL 1897' TAKE-DOWN FALLING-BLOCK SPORTING RIFLE, serial no. 34459, circa 1902, 27in. detachable cordite proof barrel of rarer octagonal form, incorporating patent no. 9711 of 18th May 1894, use number 340, with the Westley triangle at the breech end, file cut top flat with ornately decorated best quality block-mounted open sights with white metal sight lines and marked for 100, 200 and 300 yds. (for the Indian market), the block with scroll and matt detailing with engraved shell designs to the top, block mounted bead fore-sight with flip-up moonsight and folding protector hood, the left side of the barrel engraved 'WESTLEY RICHARDS & CO. LONDON.', 'FOR 3IN. CASE .577 BORE', the right side with ''W.R. PATENT DETACHABLE BARREL 340', L. B. Taylor patent automatic tang safety, patent no. 10068 of 24th May 1894, use number 221, with gold-inlaid 'SAFE' detail, cranked underlever, acanthus scroll border engraving, the left side with the makers name in a scrolling banner, brushed finish, 14in. well-figured pistolgrip stock with engraved steel pistolgrip-cap (with trap), sling swivels and including 3/4in. distressed rubber recoil pad, fore-end with Deeley & Edge patent release and horn finial, the fore-end iron marked 'PATENT 9711', weight 9lbs. 1oz.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament * Please note this item is subject to 5% VAT on the hammer price.
J. RIGBY & CO. A .250 (ROOK) TOPLEVER SINGLE-BARRELLED HAMMERLESS ROOK RIFLE, serial no. 42735, circa 1887, 26in. black powder only octagonal barrel with file cut top, open sights with two folding leaf sights with white metal sight lines and marked for 50, 100 and 150 yards, bead fore-sight, the left side with 'J. RIGBY & CO.' and '.250', the right side with '72. ST. JAMES'S ST. LONDON & DUBLIN', rounded bar action with teardrop fences, manual side safety (at fault) with gold-inlaid 'SAFE' detail, non-selective ejector, acanthus scroll engraving, retaining traces of original colour-hardening, 14 3/4in. well-figured pistolgrip stock with engraved steel pistolgrip-cap and steel buttplate, Hackett snap fore-end with horn finial, weight 5lbs. 2oz.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
RICHARD HOLLIS. LONDON, A RARE CONVERTED 14-BORE TOPLEVER HAMMERGUN BY W. MACLAUCHLAN, no visible serial number, converted from muzzle-loading, 28 3/4in. nitro reproved bold damascus barrels, the rib engraved 'RICH'D HOLLIS. LONDON.' in gothic script, Rev. John Somerville's patent safety no. 5026 of 4th November 1824, use no. 65, including flat-fronted trigger-guard with sprung safety locking the triggers, non-rebounding back-action locks, border and acanthus scroll engraving, retaining traces of colour-hardening and finish, the triggerguard engraved 'SOMERVILLE'S PATENT NO. 65 BY W. MACLAUCHLAN.', 14 1/2in. figured stock (insert repair to right overhorn) including fully engraved steel buttplate, Hackett-type snap-on fore-end with horn finial, weight 8lbs. 3oz.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
S. GRANT A .360 (ROOK) SINGLE-SHOT SIDELEVER HAMMER ROOK & RABBIT RIFLE, serial no. 210, circa 1870, 25in. octagonal black powder only barrel, with matted sight flat engraved 'S. GRANT. 67A ST. JAMES' STREET. LONDON.', dove-tailed bead fore-sight, standing notch rear-sight with two folding leaf sights marked 50, 80 and 100 yards and with white-metal inlaid sight-lines, blued non rebounding central hammer, side-lever, border and acanthus scroll engraving retaining traces of colour-hardening and finish, 14 1/4in. figured pistolgrip stock including steel buttplate, smooth horn pistolgrip cap, splinter fore-end with horn finial and cross-pin release catch, weight 5lbs. 9oz.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
HOLLAND & HOLLAND A .360 (ROOK) THOMAS 1871 PATENT SINGLE-BARRELLED TOPLEVER HAMMER ROOK RIFLE, serial no. 6609, for 1881, 28 1/4in. black powder only octagonal barrel with file cut top flat, open sights with three folding leaf sights, white metal inlaid sight lines and marked '50', '100', '150' and '200', bead fore-sight, the sides engraved 'HOLLAND & HOLLAND' to the left and '98. NEW BOND ST.. LONDON.' to the right, some external pitting, offset toplever, carved percussion fence, rebounding back-action lock with high spurred hammer (catching fence), action with John Thomas patent barrel bolting mechanism, patent no. 3091 of 15th November 1871, fine border and acanthus scroll engraving, retaining traces of original finish (some exterior rusting in places), 14 3/4in. figured pistolgrip stock with steel pistolgrip-cap and buttplate, fore-end with crosspin release (crosspin escutcheons rusted), and repaired horn finial, weight 5lb. 9oz.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
W.W. GREENER AN 8-BORE 1880 PATENT FACILE PRINCEPS NON-EJECTOR, serial no. 31897, with additional 10-bore (2 7/8in.) barrels, circa 1887, 34in. nitro reproved 'WWG' marked bold damascus barrels, the rib engraved 'W.W. GREENER. 68 HAYMARKET. LONDON. WINNER AT THE LONDON GUN TRIALS 1875, 1877, 1878 & 1879', the breech end with PATENT TREBLE WEDGE FAST'; extra later 32in. nitro reproved Greener trade mark steel barrels, the rib engraved 'W.W. GREENER. 68 HAYMARKET. LONDON. GREENER'S WROUGHT STEEL INDESTRUCTABLE BY GUNPOWDER' and with intermediate bead sight; each set of barrels with individual fore-end with Deeley & Edge patent release and horn finial, large W.W. Greener patent treble-grip action, patent no. 930 of 2nd March 1880, manual side safety, un-engraved bar the makers name in a scroll flourish to the sides, retaining slight traces of original colour-hardening, 14 7/8in. semi-pistolgrip stock (missing grip escutcheon) including 7/8in. rubber recoil pad, weight 12lb. 12oz. (8-bore barrels) and 11lb. 4oz. (10-bore barrels). Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
PRESENTED TO H.H. THE NIZAM OF THE DECCAN BY H.R.H. THE PRINCE OF WALES J. PURDEY A .360 BLACK POWDER EXPRESS DOUBLE-BARRELLED ROTARY-UNDERLEVER HAMMER RIFLE, serial no. 9165, for 1875, 27in. black powder only damascus barrels, the rib engraved 'J. PURDEY 314 1/2, OXFORD STREET, LONDON. TO H.H. THE NIZAM OF THE DECCAN. FROM H.R.H. THE PRINCE OF WALES. K.G. G.C.S.I. 1876', open sights and two folding leaf sights with white metal sight lines and marked '50', '100' and '150', Jones patent rotary-underlever, carved percussion fences, non-rebounding back-action locks with carved bolted hammers, fine acanthus scroll engraving, retaining traces of original colour-hardening and finish, 14 1/2in. well-figured stock with cheekpiece, sling eyes and steel buttplate, large gold escutcheon engraved with the Prince of Wales crest, diminutive fore-end with cross-pin release and horn finial, weight 7lbs. 11oz., in its re-lined brass-cornered oak and leather case with lift-out tray and provision for cartridge storage, with assorted associated reloading tools and the lid outer marked 'H.H. THE NIZAM 360 EXPRESS'. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
A .380 PINFIRE SINGLE-SHOT POCKET-PISTOL, UNSIGNED, serial no. 41, French circa 1850, with round brushed bright tapering 2 3/4in. break-open rifled barrel, St. Etienne proofs, squared borderline and checkerboard engraved open iron action featuring central panels of American scrollwork and stars at the intersection of each checker, central hammer, Lefaucheux forward-facing swing under-lever opening, walnut fluted grip with mouldings at the head and faceted iron pommel with ball finial, concealed automatic trigger, overall length 7 1/4in.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
A SILVER IONA CADDY SPOON, the tapered finial with Celtic design, maker's marks for Iona, Alexander Ritchie, silver marks for Edinburgh, length 120mm, approximate gross weight 32 grams (Condition Report:- detail on hallmark and design worn, repair to bowl where it meets the handle, possible replacement bowl)
CONTINENTAL CERAMICS, to include two Zsolnay, Hungary floral and gilt vases, No.5220/069, height 6.5cm and 5838/069, height 11cm, a Vallauris Pottery plate stand, and matching pitcher (chip to pitcher spout) and four tumblers (5), two Russian ornamental tea/coffee pots (one chipped finial), height 19cm, and twelve Bradex Russian themed collectors plates
Vier Fibeln, ein Bronzehenkel und eine Bleiplombe, römisch, 1. - 3. Jhdt. Eine silberne Omega-Fibel mit Nadel. Durchmesser 2,8 cm. Drei bronzene Tierfibeln, davon zwei Pferdefibeln. Zwei mit Nadel. Länge 2,6 - 3,7 cm. Ein Bronzehenkel einer Kanne. Die untere Attasche in Form eines Medusenhauptes. Schöne Patina. Länge 17 cm. Ein Bleisiegel mit Kaiserbüste im Profil nach rechts. Länge 2,3 cm. Provenienz: Aus dem Nachlass eines süddeutschen Sammlers.Zustand: II -Four Roman brooches, a bronze handle and a lead seal, 1st - 3rd century A.D. A silver omega brooch with pin. Diameter 2.8 cm. Three bronze brooches in the form of animals, two of them horses. Two with needle. Length 2.6 - 3.7 cm. A bronze handle of a jug. The lower finial in the shape of a Medusa's head. Beautiful patina. Length 17 cm. A lead seal with emperor's bust in profile to the right. Length 2.3 cm. Provenance: From the estate of a South German collector.Condition: II -
Early 20th century Sterling tea set, comprising of creamer, tea pot and lidded sugar pot, all marked hallmarked sterling Shreve, Crump & Low. Each piece is mongramed.Teapot, wooden finial and handle, Hinged lid. monogramed, stands on oval foot.Marked inside lid, Sterling, D120. Foot: 1 3/8 Pints Shreve, Crump & Low , Sterling and hallmarks for Birmingham.Height 16cm Weight: 4100gCreamer sterling, oval foot, monogramed Foot marks: 3/8 Pints Shreve, Crump & Low , Sterling and hallmarks for Birmingham.Height: 14.9cm Weight: 300gSugar pot with lid marked Sterling.:monogramed wooden finial is damaged. Height: 14.8cm Weight: 170g
Teekanne auf Rechaud, im Louis Philipp Stil, um 1860-1870, Silber 13 Lot, Feingehalt, punziert, gedrungene Birnform, godroniert, Beindetails, Knauf aus reliefierten Weinreben, Höhe 37 cm, Gesamtgewicht ca. 1800 g, Unterseite der Kanne mit Lötstelle, Echtheitsurkunde anbeiTeapot and rechaudLouis Philippe style, ca. 1860-1870, 13 lot silver, hallmarked with fineness, of globular form with gadrooning, bone details and grapevine relief finial, height 37 cm, total weight ca. 1,800 g, soldered repair on the underside of the teapot, includes certificate of authenticity
Bronzeschwert mit ScheibenknaufLuristan, 1. Jtd. v. Chr., Bronze, Griff aus einem Rundstab mit 2 Scheiben, Länge 57 cm, grüne Patina, eine Scheibe beschädigt, altersbedingte SpurenBronze sword with a disc shaped finialLuristan, 1st millenium B.C., bronze, handle formed from a cylindrical rod and two discs, length 57 cm, green patina, one disc damaged, age related wear
A VICTORIAN BLUE JASPERWARE CHEESE DOME, decorated with putti playing musical instruments and borders of oak leaves, with an acorn finial. 25.5cm highThe absence of a Condition Report does not imply that a lot is without imperfections. Please note carefully the exclusion of liability for the condition of lots contained in the Conditions of Sale.Ingrained surface dirt, some losses to the raised design including the head of a putto, various firing cracks to design.
A CHINESE YIXING STONEWARE TEAPOT, the six-sided body moulded with shi-shi and other motifs, the cover with foo dog finial, bears impressed seal mark. 11cm high, length approx. 20cmThe absence of a Condition Report does not imply that a lot is without imperfections. Please note carefully the exclusion of liability for the condition of lots contained in the Conditions of Sale.Build-up of surface dirt, light surface wear and scratching, good overall
A CHINESE BRONZE KORO AND COVER, the body decorated with reserves of figures spaced by clouds and Ho Ho birds, with Ho Ho bird mask handles and raised on three tall scrolling supports, the pierced cover with a lion dog finial, 31cm high; AND A PAIR OF CHINESE BRASS CENSERS, the bodies decorated with reserves of characters and lion masks, with loop handles and raised on tripod supports, 15cm high (3)The absence of a Condition Report does not imply that a lot is without imperfections. Please note carefully the exclusion of liability for the condition of lots contained in the Conditions of Sale.The legs of the bronze censer have been repaired. One of the brass censers has two or three tiny cracks to the rim.
A 20th Century Scottish 1828 pattern Infantry Officers basket hilted sword. The sword having a dome pommel with ball finial, leather and wire wrapped grip, basket hilt with heart piercing and fabric tassels. The ricasso marked with a six point star and the double fullered blade etched with scroll work. Housed in a steel scabbard with suspension rings. Measures approx 103cm.
An original George VI 1827 pattern British Light Infantry / The Rifles regiment officers sword. The sword having a dome shaped pommel with ball finial and textured wire wrapped grip. The pierced half-basket guard having the regimental bugle below the Royal crown. The ricasso marked with the 6 pointed ' proved ' star and scrollwork engraving. Housed in a brown leather scabbard. Measures approx 100cm.
Late 19th century metal hanging wall clock by Japy Freres, the cream dial with Roman and Arabic numerals and flanked by gilt floral handles, the single train movement with makers mark, the circular metal case painted with flowers and having gilt metal floral mounts, on gilt metal hanging chain, 35.5cm high (including finial and base but not chain)
French rouge marble 8 day clock garniture by Japy Freres striking a bell on hour and half hour, clock with urn finial and gilt metal mounts, flanked by two brass and marble single sconce garniture., pendulum present, Clock 44cm h, 25cm W, and garniture h 33cm Provenance: Private and extensive collection of over 100 clocks sent in for sale by the executors of a local deceased estate.
French marble and polychrome painted cast metal mantel clock with classical lady and cherub with basket of flowers, enamel dial, and Arabic numerals bearing plaque Printemps, Floeuri par l et F Moreau, Med' d'or with pendulum 35cm h x 43.5cm x 15cm and a metal mantel clock with urn finial, two train movement , enamel Roman numerals h37cm, w30cm d12cm Provenance: Private and extensive collection of over 100 clocks sent in for sale by the executors of a local deceased estate.
French Black slate mantel clock , two train movement, gilt metal urn finial, drum movement signed Courtecuisse , Lille, striking on a bell on the hour and half hour black dial gilt Roman numerals 46cm h, x w31cm d16cm with pendulum and another similar smaller drum movement H and F Paris Provenance: Private and extensive collection of over 100 clocks sent in for sale by the executors of a local deceased estate.
Two reconstituted stone planters, H33cm and H32cm, together with a bread bin, reconstituted stone garden plaque of a cherub, two reconstituted stone urns on plinth bases, H29cm, reconstituted stone pineapple finial, reconstituted stone garden plaque of a lady, small reconstituted stone pagoda, and reconstituted stone base, H25cm
Bernard Cuzner. A silver spoon with hammered heart-shaped bowl and stem, the foliate intertwined finial (a/f) terminating in an amethyst cabochon. Maker's mark: BC (Bernard Cuzner), Birmingham, 1905. 30 grams. * Bernard Cuzner (1877-1956) teacher and designer from the early 1900s, he became Head of the Department of Metalwork at the Birmingham School of Art in 1910. He was influenced in his early career by Cattermole-Smith and Gaskin. He was also a designer for W.H. Haseler and Liberty from very early in his career, author of the "Silversmith's Manual" first published in 1935 and again in 1949 with numerous reprints and an important contributor to Arts and Crafts flatware.
An 18thC Old Sheffield Plated coffee pot, the domed hinged lid with a gadrooned edge and flame finial, a double scroll carved ebony handle, leafage capped spout and low foot with gadrooned edge, late 1760's, an electro plated George III rococo style coffee pot, a George I style electroplated coffee pot of 'lighthouse' form with hinged domed cover, faceted goose neck spout and carved 'S' scroll handle and two others in the early /mid 18th century style. (5)
Loading...-
116099 item(s)/page