A 19TH CENTURY DIAMOND CLUSTER PENDANT, centred with a pear-shaped drop of cushion-shaped old-cut diamonds in pinched collet setting, spaced by rose-cut diamond points, within an openwork surround of graduated similarly cut diamonds, surmounted by diamond set foliage, gold and silver mounted, (fitting possibly later), total weight of old-cut diamonds approximately 0.80ct, length 2.4cm Condition report: Old-cut diamonds are well matched, bright and lively, but some have chips and surface-reaching fractures, with estimated SI1 to P2 clarity and H to K colour, assessed mounted. Largest diamond weight approx. 0.40ct. The lasque-cut diamonds have a greyish, fractured appearance. Surface wear and patchy tarnishing to mount, patchy thinning to the edges of the settings. The pendant may previously been part of a larger jewel. Gross weight approx. 2gm.
We found 137169 price guide item(s) matching your search
There are 137169 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
137169 item(s)/page
A PINK TOURMALINE AND DIAMOND PANEL RING, the rectangular pierced and millegrain panel centred with a circular mixed-cut pink tourmaline, bordered by graduated old brilliant, Swiss and single-cut diamonds, above a pierced gallery, white precious metal mounted, stamped 'Platinum', total diamond weight approximately 0.35ct, ring size N Condition report: The tourmaline measures approximately 4.8mm in diameter and has surface scuffs, chips and scratches. Diamonds are well matched, bright and lively, but one of the brilliant cuts has a large chip that penetrates through to the pavilion of the stone. This stone may need replacing. Remaining diamonds have estimated VS2 to P1 clarity and H to K colour, assessed mounted. There is a split to the base of one shoulder, patchy wear to the edges of the setting and solder joins to the shank. Length of panel approx. 1.5cm. Date of manufacture unknown, metal standard untested. Gross weight approximately 4.3gm.
A DIAMOND SINGLE STONE PENDANT, the heart-shaped brilliant-cut diamond in four claw setting, surmounted by a heart-shaped bale, white precious metal mounted, stamped '750', on a fine curb-link chain stamped '14k', diamond weight approximately 1.60ct, pendant length 1.55cm Condition report: The diamond has pale surface-reaching fractures and chips/naturals to the faceted girdle, with estimated SI2 to P1 clarity and J to K colour, assessed mounted. The pendant mount has a scuff across the heart-shaped panel and a solder join/repair to the back. The chain has surface wear, an extension section and the clasp is loose fitting. Metal standard is untested. Gross weight approx. 4.5gm.
AN EMERALD AND DIAMOND CLUSTER RING, the rectangular step-cut emerald claw set within a border of old-cut diamonds, between pierced and tapered diamond set shoulders, two colour precious metal mounted, total diamond weight approximately 0.60ct, ring size M½ Condition report: The emerald has a light green hue and contains fracture, fissure and small mineral inclusions. Some of the fractures are surface-reaching. The emerald has scuffs and scratches throughout and chips/nicks to facet edges, and measures approx. 6.2cm length x 5.4mm width x 3.2mm depth. The outline of the emerald is slightly irregular. Diamonds are well matched, bright and lively, occasional stones with small surface-reaching fractures, estimated VS2 to SI3 clarity and H to K colour, assessed mounted. The ring mount has surface wear, patchy rubbing to the tips of the claws and some of the claws may require re-tipping. The shoulders and back of the shank have solder joins. The setting measures approx. 12.5mm length x 11.5mm width. Metal standard is untested. Gross weight approx. 3gm.
A DIAMOND CIRCLET BROOCH, designed as a row of cushion-shaped old-cut diamonds in pinched collet settings, spaced by similarly set lasque-cut diamonds, two colour precious metal mounted, in Carrington & Co Ltd retailer's case, total weight of old-cut diamonds approximately 0.80ct, diameter 2.6cm Condition report: Old-cut diamonds are well matched, bright and lively, some stones with surface-reaching fractures and chips, with estimated H to K colour and SI1 to P3 clarity (due to chips), assessed mounted. Lasque-cut diamonds have variable colour and clarity, some greyish in appearance, some fractured or chipped, one stone possibly replaced. The mount has general wear and patchy tarnishing, with scuffs, nicks and chips. The pin is functioning but the safety catch may be later replaced. Metal standard is untested but possibly a gold/silver combination. Gross weight approx. 4.5gm.
A DIAMOND PANEL BROOCH, of whorl design, centred with a round brilliant-cut diamond in eight claw setting, enclosed by bands of graduated old-cut diamonds, white precious metal mounted, principal diamond weight approximately 0.90ct, total diamond weight approximately 2ct, diameter 3.2cm Condition report: The principal diamond is bright and lively, with estimated VS2 to SI1 clarity and I to J colour, assessed mounted. Bordering diamonds are well matched, bright and lively, occasional stones with surface-reaching fractures and chips, estimated VS2 to P2 clarity and H to K colour, assessed mounted. The mount has general surface wear, some scuffs and chips, with fine seams/splits to the back of the central claw setting, and dark solder joins at the junction to the brooch pin, which is later replaced but functioning. Solder seams are also visible at junctions within the panel. Metal standard is untested. Gross weight approx. 11.3gm.
A DIAMOND STAR BROOCH, centred with a tiered cluster of old-cut diamonds, bordered by rays of smaller old, single and lasque-cut diamonds, two colour precious metal mounted, with vacant threaded aperture and later brooch fitting, total diamond weight approximately 0.65ct, length 3cm Diamonds are well matched, bright and lively, some have surface-reaching fractures and chips, with estimated SI1 to P2 clarity and H to K colour, assessed mounted. Largest diamond weight approx. 0.10ct. The mount has surface wear, patchy thinning to the edges of the setting and tarnishing. The pin is later added, difficult to operate and the safety clasp doesn’t fully open. The mount has a vacant threaded aperture for prior use of a detachable fitting. Metal standard is untested but possibly a gold/silver combination. Gross weight approx. 4.2gm.
A BLACK OPAL AND DIAMOND CLUSTER PANEL BROOCH, the oval cabochon black opal collet set within a foliate border of graduated pear-shaped and cushion-shaped old-cut diamonds, white precious metal mounted, in fitted retailer's case, opal dimensions approximately 28mm length x 14.5mm width x 9.7mm depth, total diamond weight approximately 4.70ct, length 5cm Condition report: The opal has a varied play of colour, with shades of green, orange and yellow to a bluish ground, and has light surface wear, with occasional nicks and scuffs. Diamonds are well matched, bright and lively, with estimated VS2 to SI2 clarity and H to K colour, assessed mounted, some stones drawing light yellowish tints. The largest pear-shaped diamonds measure approx. 8mm length x 6mm width x 3.7mm depth each. The largest cushion-shaped diamonds measure approx. 5.2mm in length/width x 2.6mm - 3.6mm depth. The mount has light surface wear and scuffs and the clasp is functioning. Metal standard is untested. Gross weight approx. 13.8gm. The case has exterior scuffs.
A DIAMOND STAR BROOCH, of abstract design, the tiered cluster of graduated old and single-cut diamonds in claw settings, two colour precious metal mounted, largest diamond weight approximately 0.35ct, total diamond weight approximately 3ct, length 4.8cm Condition report: Diamonds have variable colour and clarity, some stones with chips and surface-reaching fractures, estimated SI 1 to P3 clarity and H to K colour, assessed mounted. General surface wear to mount, clasp is functioning. Gross weight approx. 18.5gm .
A PAIR OF BLACK OPAL AND DIAMOND CLUSTER EAR STUDS, each oval black opal cabochon claw set within a border of single-cut diamonds, on post fittings, two colour precious metal mounted, total diamond weight approximately 0.50ct, length 1.6cm Condition report: One of the opals has a slightly darker blue body colour. Both have variable greenish play of colour, with surface scuffs, scratches, nicks and pitting. The opals measure approx. 12.8mm x 9.2mm and 13.3mm x 9mm in length x width each. Diamonds are well matched and fairly bright, occasional stones with surface-reaching fractures and small nicks/chips, estimated VS2 to P1 clarity and H to K colour, assessed mounted. The mounts have general surface wear, with patchy thinning to the edges of the settings. Both posts are mis-shapen and the butterflies do not match. Metal standard is untested. Gross weight approx. 4.5gm. The case has staining to the cushion and scuffs to the exterior finish.
A DIAMOND CLUSTER RING, centred with a line of graduated baguette-cut diamonds in claw settings, bordered by a row of similarly set graduated round brilliant-cut diamonds, 18ct two colour gold mounted, total diamond weight approximately 1.80ct, ring size O Condition report: Diamonds are well matched, bright and lively, with estimated VS1 to SI2 clarity and H to K colour, assessed mounted. The setting requires a comprehensive clean. The mount has general surface wear. Gross weight approx. 8.6gm.
AN ART DECO AQUAMARINE AND DIAMOND PENDANT, the kite-shaped step-cut aquamarine drop in collet setting, bordered by similarly set old brilliant-cut diamonds, below a tapered linear surmount of old and single-cut diamonds, two colour precious metal mounted, on a later fine ropetwist-link chain stamped '10k', total diamond weight approximately 0.80ct, pendant length 4.9cm Condition report: The aquamarine has a light to mid greenish-blue hue with good transparency and light facet edge abrasion, measuring approx. 18mm length x 12.5mm width x 6.7mm depth. Diamonds are well matched, bright and lively, with occasional surface-reaching fractures and chips, estimated VS1 to P2 clarity (due to chips) and H to K colour, assessed mounted. The mount has light surface wear and patchy tarnishing, with small dark solder joins at junctions within the frame. The chain is later, of very fine gauge with surface wear, and the clasp is functioning. Metal standard for the pendant and chain is untested. Gross pendant weight approx. 3.7gm.
AN ART DECO DIAMOND AND GEM SET BRACELET, designed as a tapered line of articulated rectangular panels, each millegrain set with an old-cut diamond bordered by faceted synthetic sapphire batons, white precious metal mounted, with foliate engraved sides and clasp, stamped 'D&H', largest diamond weight approximately 0.23ct, total diamond weight approximately 3.30ct, length 17.5cm Condition report: Diamonds are mostly well matched and fairly bright and lively, but some stones contain surface-reaching fractures and chips, with estimated VS2 to P2 clarity and H to K colour, assessed mounted. The smallest diamond weight is approximately 0.07ct. Synthetic sapphires have slightly variable blue hues, some stones with curved colour zoning visible to the eye, all with light surface abrasion. The bracelet fully articulates and has surface wear throughout, but some of the connecting rivets have been solder repaired, with dark solder to the sides of affected links. Engraved decoration is crisply defined. One diamond appears to have been glued back in position, with glue residue to the back of the setting. Bracelet width tapers from approx. 10mm to 8.5mm. The clasp and safety catches are functioning. Metal standard is untested. Gross weight approx. 24gm.
A PAIR OF DIAMOND CLUSTER EAR STUDS, each designed as a flowerhead cluster of round brilliant-cut diamonds in claw setting, on post fittings, 18ct white gold mounted, total diamond weight approximately 0.30ct, diameter 0.55cm Condition report: Diamonds are bright and lively, but some of the stones contain surface-reaching fractures/chips, estimated I to K colour and SI1 to P2 clarity, assessed mounted. The earring mounts are modern with light surface wear. Gross weight approx. 1.5gm.
A DIAMOND FULL HOOP ETERNITY RING, set throughout with old and Swiss-cut diamonds, white precious metal mounted, total diamond weight approximately 0.75ct, ring size N Condition report: Diamond are mostly well matched, fairly bright and lively, but some stones have surface-reaching fractures and chips, with estimated VS2 to P3 clarity (due to chips) and H to K colour, assessed mounted. The mount has surface wear, with some thinning and flatness to the edges of the setting and tips of the grains. Width approx. 2.8cm. Metal standard is untested. Gross weight approx. 3.1gm.
A DIAMOND CLUSTER PANEL BROOCH/PENDANT, designed as a flowerhead cluster of graduated cushion-shaped old-cut diamonds in pinched collet and grain settings, spaced by rose and lasque-cut diamond points, with detachable brooch fitting, two colour precious metal mounted, largest diamond weight approximately 1ct, total diamond weight approximately 3ct, diameter 2.55cm Condition report: Diamonds are mostly well matched, fairly bright and lively, but the principal stone and some outer stones contain surface-reaching fractures and small chips, with estimated SI1 to P2 clarity and H to K colour, assessed mounted. The mount has surface wear and patchy tarnishing, the pin is functioning, but the safety catch may be later replaced. There is a small hole/pit to the side of the mount, near the pendant fitting. Metal standard is untested, but possibly a gold/silver combination. Gross weight approx. 8gm.
A DIAMOND FULL HOOP ETERNITY RING, set throughout with round brilliant and old-cut diamonds, white precious metal mounted, total diamond weight approximately 1.60ct, ring size N½ Condition report: Diamonds are generally well matched, bright and lively, some stones with chips and surface-reaching fractures, estimated SI1 to P2 clarity and H to K colour, assessed mounted. Surface wear to mount, some thinning to the edges of the setting and tips of the grains. Metal standard is untested. Gross weight approx. 4gm.
A DIAMOND PANEL RING, the openwork octagonal panel centred with a trio of round brilliant-cut diamonds in collet settings, bordered by single-cut diamonds, between similarly cut diamond set scrolled bifurcated shoulders, 18ct white gold mounted, total diamond weight approximately 0.80ct, ring size Q Condition report: Diamonds are generally bright and lively but contain surface-reaching fractures and small chips, with estimated VS2 to P2 clarity and H to K colour, assessed mounted. The setting requires cleaning. The mount is modern with general wear, scuffs and nicks. The shank has worn a little thin to the back, is out of shape and has been re-sized. Gross weight approx. 6.2gm. Panel length approx. 1.85cm.
A CHINESE CLAIR-DE-LUNE GLAZED TAPERING VASE, LIUYE ZUN LATE QING DYNASTY The slender body surmounted by a cylindrical neck which rises to a flared rim, decorated to the exterior with a subtle pale blue glaze, the base with a six character Kangxi mark in underglaze blue, with paper labels for Sydney L Moss and the K W Woollcombe-Boyce Collection, 16.9cm. Provenance: from the collection of Dr Edward M Brett (d.2018), Hampstead.
An early 20th century diamond bracelet, the striated pierced baton links with cut down collet set old brilliant cut diamond spacers, approximately 1.35 carats total, 19cm long, 15.4g grossCondition Report: Unmarked, but in our opinion higher carat gold, platinum to the front, the diamonds I clarity, colour estimated I-K. The clasp in working order, some light surface wear to the settings.Condition Report Disclaimer
A Belle Époque diamond and seed pearl necklace, circa 1910, the pierced foliate circular panel set with old cut and rose cut diamonds, approximately 2.30 carats total, suspended from a woven lattice of seed pearls, to pierced quatrefoil rose and old mine cut diamond set panels, unsigned, the necklace section 35cm long, seed pearl and circular panel drop 13cm long, 32.6g grossCondition Report: Top principal diamond approximately 0.75 carats I-j colour, clarity I- surface reaching fracture to one side of the stone and some large chips to the girdle, seen in setting, central diamond approximately 0.75 carats, a deeper stone colour K-L, clarity I, large naturals to one side of the crown. there is a solder repair to the top of the panel wither the suspensory hook fits in, and a few further small patches of solder visible to the reverse, possibly from manufacture. Seed pearls well matched in colour, the stringing appears ok.Panel 3.9cm diameterCondition Report Disclaimer
A single stone diamond ring, the marquise cut diamond weighing 3.74 carats within a claw setting, to tapered baguette cut diamond shoulders, finger size M 1/2Condition Report: Colour estimated K, clarity VS2/SI1, small clear mineral inclusion to one side of the table, very close to the crown facets, there is a small surface reaching fracture at a tip, partially hidden by the setting, there is also a chip to the girdle near one of the tips. Diamond assessed in setting. Approximately 16.4mm x 7.9mm x 4.8mmCondition Report Disclaimer
An early 20th century diamond toi et moi crossover ring, circa 1910, the old brilliant cut diamonds in eight claw removable screw settings, weighing 2.35 and 2.79 carats, to old mine cut diamond set shoulders, finger size L 1/2, 7.5g gross, in a dark burgundy leather ring box with gold tooling, stamped M. Rauline 32 Ave de L'Opera, ParisCondition Report: The principal diamonds are both removable from the setting, and could be worn in a necklace by family repute, however it doesn't have any other fittings, the screw in settings are very subtle and well made, and hold the stones securely, the diamond colour estimated J-K, one stone is VS1, the other SI, there is a mineral inclusion that was previously hidden under the claw, a couple of small nicks to the crown facets, assessed in setting. One with minimal fluorescence the other with low fluorescence. The setting has some light wear commensurate with age and use.Condition Report Disclaimer
An early 20th century diamond bracelet, the graduated millegrain set old cut diamonds with shaped millegrained links between, approximately 4.55 carats total, 19.3cm long, 10.8g grossCondition Report: One of the links and diamond is a poorer replacement, the diamond is an I2/3 clarity, M colour eight cut diamond in a setting which is not millegrained. The old cut diamonds are varying in clarity mostly SI-I1, colour mostly I-K . The clasp has had a new tongue, but it is in working order. There is a shaped link which has traces of old glue around two of the diamonds. The bracelet is flexible, it has wear commensurate with age and use. Condition Report Disclaimer
A diamond floral spray brooch, the leaves and flower heads set with graduated old cut diamonds, approximately 6.10 carats total, 6.3cm long, 17.6g grossCondition Report: The diamonds are all present and correct, bright and lively, colour estimated H-K, clarity varying from VS-I. The setting has light wear commensurate with use, brooch fitting in good working order.Condition Report Disclaimer
A scrolled diamond dress ring, the pierced bombé dress ring set with brilliant cut diamonds, approximately 5.08 carats total, stamped 750 with Italian control marks, finger size MCondition Report: Laser engraved with diamond carat weight, clarity mostly VS-SI, colour I-K, diamonds bright and lively. Some light wear, a few scratches to the back of the shankCondition Report Disclaimer
A diamond three stone ring, the graduated brilliant cut diamonds in four claw settings, approximately 1.04 carats total, the shank stamped 750 with Italian control marks, finger size N, 4.6g grossCondition Report: The diamonds weights 0.31; 0.39; 0.34 central diamond colour K-L, sides H-I, clarity SI. Minimal wear to settingsCondition Report Disclaimer
An French Art Nouveau early 20th century amethyst dress ring, circa 1900, the mixed cut amethyst with a trio of claws to each canted corner, the claws to tapered fan like panels with a scalloped gallery between, the shank numbered 700 with rubbed French poincons, finger size K, 9.1g grossCondition Report: There is wear and some thinning to the claws, particularly the middle claws, one claw has had the tip worn back, although the stone is still secure, the shank has wear from use, there are the faint rubbed remains of the makers mark and gold standard marks, there are also some further polished knocks to the shank towards the shoulders, Numbered 700 on the inside of the shank, sadly no signature. The setting is 18 carat gold. There are a few light scratches and nibbles to the amethyst table and crown, but no major cracks or chipsCondition Report Disclaimer
Piaget, ref. 8148 K 51, a lady's 18 carat gold bracelet watch, no. 415891, circa 1980, quartz movement, 9 jewels, cal. 8P, gilt dial, Dauphine hands, screwed down case back with four screws, stamped with 750 common control mark, on a Piaget 18 carat gold block link bracelet with snap clasp, case, dial, movement, crown and clasp signed, width 20mm, bracelet 14.5cm Condition Report: Movement is currently functioning. Movement appears to be in a generally good condition with little sign of previous intervention when viewed under a 4x loupe. Dial appears to be in a generally good condition with no marks visible when viewed under a 4x loupe. Hands appear to be in a generally good condition.Glass appears free of significant scratches or marks when viewed under a 4x loupe. Case shows light scratches and marks. Crown has light scratches when viewed under a 4x loupe. Bracelet has light scratches and some signs of light stretching to links. Clasp is currently functioning and appears to be in good condition. Bracelet measures approximately 14.5cm including case.50g grossThis lot does not come with box or papers.Dreweatts 1759 do not guarantee the working order or accuracy of any lots sold. Due to opening of the case back we recommend this watch is re-sealed by a qualified technician to ensure any stated water resistance is achieved.If you should have any further questions regarding this lot, please contact the Watch Department on 01635 553 553 or at watches@dreweatts.com Condition Report Disclaimer
A single stone diamond ring, the brilliant cut diamond weighing 3.86 carats, within an eight claw setting, within a pierced scrolled gallery, finger size 0 1/2, 5.2g grossCondition Report: The diamond is bright and lively. Colour estimated J-K, P1, some small mineral inclusions under the table, an incipient cleavage crack to one side of the stone and a curving internal fracture near a claw. The setting has wear commensurate with use, one claw may benefit from retipping, but the stone is still secure in the setting. Condition Report Disclaimer
AQUAMARINE RING. A bespoke ring, set a large rectangular, stepped cut aquamarine stone. Unstamped white coloured metal setting & shank. Size of stone: 13mm x 10mm. Size K. Please note that all items in this auction are previously owned & are offered on behalf of private vendors. If detail on condition is required on any lot(s) PLEASE ASK FOR A CONDITION REPORT BEFORE BIDDING. The absence of a condition report does not imply the lot is perfect.WE CAN SHIP THIS LOT, but NOT if part of a large, multiple lots purchase.
MAGNUS MAXIMUS. Two silver rings by Magnus Maximus Designs of Frizington, Cumbria. One ring set with amethyst quartz, the other with iron pyrites. Each stamped with maker's mark & Scottish hallmarks. Amethyst size J/K, the other size O/P. Please note that all items in this auction are previously owned & are offered on behalf of private vendors. If detail on condition is required on any lot(s) PLEASE ASK FOR A CONDITION REPORT BEFORE BIDDING. The absence of a condition report does not imply the lot is perfect.WE CAN SHIP THIS LOT, but NOT if part of a large, multiple lots purchase.
GOLD RINGS. An 18ct. gold band. Size K/L. Approx. 4.9g. Also, a 9ct. gold band. Size Q/R (approx. 1.4g). Please note that all items in this auction are previously owned & are offered on behalf of private vendors. If detail on condition is required on any lot(s) PLEASE ASK FOR A CONDITION REPORT BEFORE BIDDING. The absence of a condition report does not imply the lot is perfect.WE CAN SHIP THIS LOT, but NOT if part of a large, multiple lots purchase.
GOLD RING. A high purity gold ring, set a row of se en square cut pink stones, possibly synthetic rubies. Stamped marks. Size K. Please note that all items in this auction are previously owned & are offered on behalf of private vendors. If detail on condition is required on any lot(s) PLEASE ASK FOR A CONDITION REPORT BEFORE BIDDING. The absence of a condition report does not imply the lot is perfect.WE CAN SHIP THIS LOT, but NOT if part of a large, multiple lots purchase.
EMERALD RING. An 18ct. gold emerald & diamond cluster ring. Size K/L. Approx. 4.5g. Also a pair of 9ct. gold, emerald & diamond cluster ear studs. Please note that all items in this auction are previously owned & are offered on behalf of private vendors. If detail on condition is required on any lot(s) PLEASE ASK FOR A CONDITION REPORT BEFORE BIDDING. The absence of a condition report does not imply the lot is perfect.WE CAN SHIP THIS LOT, but NOT if part of a large, multiple lots purchase.
Loading...-
137169 item(s)/page