A pair of fire opal and diamond ear pendants, each faceted pear-shaped fire opal drop surmounted by a line of round brilliant-cut diamonds in millegrain collet settings, white precious metal mounted, on later screw-back fittings stamped '9ct', (one single-cut diamond later replaced), total diamond weight approximately 0.25ct, length 3.6cmCondition report: The fire opals have vibrant deep orange hues, one slightly longer in length and one slightly wider in length. Both fire opals have surface wear, scuffs and nicks/chips. Both of the fire opals have white residue visible at the junctions to the caps, possibly where they have been glued in place. Dimensions of fire opals approximately 12mm length x 8.7mm width and 11mm length x 9mm width respectively. Diamonds are well matched, bright and lively, with estimated VS1 to SI2 clarity and H to K colour, assessed mounted. The single-cut diamond is likely to be a later replacement. The mounts have surface wear, nicks and scuffs. The screw-back fittings are later replaced and have dark solder joins at the junctions with the upper diamond settings. Both fittings are functioning. Metal standard of the mounts is untested. Gross weight approx. 4gm.
We found 137169 price guide item(s) matching your search
There are 137169 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
137169 item(s)/page
A pair of diamond set ear clips, each shaped oval panel centred with a pavé set cluster of graduated round brilliant-cut diamonds, within a textured abstract border, on hinged clip fittings, white precious metal mounted, total diamond weight approximately 0.90ct, length 2.2cmCondition report: Diamonds have slightly variable colour and clarity, some stones with surface-reaching fractures, estimated SI1 to P2 clarity and H to K colour, assessed mounted. The mounts have general surface wear, scratches, nicks and scuffs, with areas of porosity. The hinged clips have some deeper chips/scuffs and are functioning. Metal standard is untested. Gross weight approx. 18.7gm.
A pair of chalcedony and diamond cufflinks, each circular cabochon chalcedony bordered by single-cut diamonds, white precious metal mounted, total diamond weight approximately 0.48ct, panel diameter 1.3cmCondition report:Surface wear, scuffs, light scratches and nicks to the cabochons and mounts, commensurate for use. One of the cufflinks has two fine splits to the fitting. The cabochons have a bluish shimmer to a greyish/whiteish ground and measure approximately 8.5mm in diameter and 5mm in depth. Diamonds are well matched, bright and lively, occasional stones with small nicks/chips, the remaining diamonds with estimated VS2 to SI2 clarity and H to K colour, assessed mounted. Metal standard is untested. Gross weight approx. 8.5gm.
A sapphire and diamond pendant necklace, designed as a crescent-shaped panel with central cluster, the principal cushion-shaped sapphire bordered by old and single-cut diamonds, between channels of alternating similarly cut sapphires and diamonds, adapted with a later trace-link back chain stamped '9C', total diamond weight approximately 0.45ct, pendant width 4.2cm, necklace length 46cmCondition report: Sapphires are well matched, of mid purplish-blue hues, with good transparency and areas of whiteish colour zoning visible under magnification. One of the smaller outer sapphires is chipped, the remaining sapphires have light facet edge abrasion. Largest sapphire dimensions approx. 5mm length x 4.5mm width x 2.5mm depth. Diamonds are mostly well matched, bright and lively. One of the smaller outer diamonds is chipped, the remaining diamonds have estimated VS2 to SI2 clarity and H to K colour, assessed mounted. Length of central cluster approx. 9.5mm. The crescent has surface wear, scuffs, nicks and patchy tarnishing/firestaining, with wear to the tips and edges of the settings. Some of the claws may require re-tipping. The crescent is likely to originally have been a brooch and has been adapted as a necklace with a later added chain. The chain has light surface wear and the clasp is functioning. Metal standard is untested. Gross weight approx. 9.3gm.
A synthetic sapphire and diamond line bangle, of hinged oval hollow form, the graduated oval mixed-cut synthetic sapphires spaced by trios of old-cut diamonds, above a scroll pierced gallery, yellow precious metal mounted, total diamond weight approximately 1.20ct, inner diameter 5.6cmCondition report: The synthetic sapphires are mostly well matched, of mid to dark-blue hues, and contain small bubble inclusions when viewed under magnification. The synthetic sapphires graduate from approximately 7.5mm to 9.5mm in length and all have surface wear, scuffs, nicks and occasional small chips. Diamonds have variable colour and clarity but give an overall lively appearance, some stones with chips/fractures and most stones with eye visible inclusions, with estimated SI2 to P2 clarity and I to K colour, assessed mounted. Diamonds graduate from approximately 0.02ct to 0.10ct in weight. The mount has general wear, scuffs, scratches and nicks throughout, commensurate for use, and the tongue clasp is tight fitting. The back of the bangle has a solder repair and the tips of the claw settings are worn, some requiring re-tipping. Metal standard is untested. Gross weight approx. 17.8gm.
A diamond circlet brooch, circa 1920-30, the reeded circlet applied with two entwined scrolled and millegrained channels of graduated old-cut diamonds, suspending a cushion-shaped old-cut diamond drop in claw setting, two colour precious metal mounted, principal diamond weight approximately 0.65ct, total diamond weight approximately 1.10ct, length 3.75cmCondition report: Diamonds have variable colour and clarity but give a mostly bright and lively appearance. The principal diamond measures approx. 5.4mm length x 5.3mm width x 3.7mm depth and has two outer chips, with estimated P2 clarity and J colour, assessed mounted. Four of the other diamonds have pronounced brownish/greyish tints and are heavily included, one with a surface-reaching fracture. The remaining diamonds have estimated SI2 to P2 clarity and H to K colour, some stones with small chips/surface-reaching fractures. The mount has surface wear, scuffs and nicks commensurate for use, with wear to the tips of the claw setting. The fitting is currently functioning. The mount is not marked and metal standard is untested. Gross weight approx. 7.5gm.By repute, this piece was commissioned in the 1920s using diamonds from an earlier piece. Thence by descent.
An aquamarine and diamond three stone ring, the circular mixed-cut aquamarine claw set between two pear-shaped brilliant-cut diamonds, 18ct white gold mounted, total diamond weight approximately 0.40ct, ring size N½Condition report: The aquamarine has heavy scuffs, chips and scratches and requires re-polishing. Of light greenish-blue hue, it measures approx. 9mm diameter x 5.5mm depth. Diamonds are well matched, fairly bright and lively, with estimated I to K colour and SI1 to SI2 clarity, assessed mounted. The ring mount is modern, with scuffs, scratches and nicks/chips throughout, heavier to the shank, commensurate for regular use. Both sides of the setting have small grooves worn in to the gallery, due to wear against another ring. The shank has been re-sized with a later added section. Maker's mark 'MP'. Gross weight approx. 4.6gm.
A late Victorian/Edwardian diamond crescent brooch, designed as a line of graduated old-cut diamonds, above a scalloped gallery, the reverse with vacant threaded aperture and later brooch fitting, gold and silver mounted, total diamond weight approximately 1.60ct, length 6.5cmCondition report: Diamonds have slightly variable colour and clarity, some stones drawing light yellowish tints and with surface-reaching fractures/chips. One of the outer diamonds has a chip to the edge which penetrates into the stone. Estimated SI1 to P2 clarity and I to K colour, assessed mounted. Weight of largest diamond approx. 0.40ct, measuring approx. 4.8mm length/width x 2.6mm depth. Weight of smallest diamond approx. 0.025ct. The mount has general surface wear, scuffs, nicks and scratches, with traces of porosity to the sides of the setting and thinning to the edges of the setting, which may require re-tipping/repairing. The brooch fitting and safety chain are later added and the mount would have originally had a detachable fitting, which is no longer present. Metal standard is untested. Gross weight approx. 5.4gm.
A sapphire and diamond cluster ring, designed as an abstract spray of circular mixed-cut and navette-shaped sapphires, framed by graduated round brilliant-cut diamonds, 18ct two colour gold mounted, with London import marks for 1975, total diamond weight approximately 0.30ct, ring size OCondition report: Scuffs and small nicks/chips to sapphires, which have slightly variable mid to dark blue hues, some stones with areas of colour zoning. Diamonds are well matched, bright and lively, occasional stones with possible small nicks to the surface, estimated VS1 to SI2 clarity and I to K colour, assessed mounted. General surface wear and patchy tarnishing to mount. Marks are clearly struck, maker's mark is 'C&F'. Gross weight approx. 4.6gm.
A diamond panel bracelet, designed as a series of navette-shaped panels, each millegrain set with a line of single and rose-cut diamonds, spaced by individual old brilliant-cut diamonds in millegrain collet settings, white precious metal mounted, total diamond weight approximately 1.20ct, length 17.5cmCondition report: Several of the panels are mis-shapen and have been knocked/dinged to the side, affecting the symmetry of the outline on these panels. Each of the panels has areas of thinning and wear to the edges of the millergain setting, with occasional small splits/nicks, and have areas of sharpness under touch. The individual collet settings have surface wear and the bracelet has scuffs, scratches and nicks throughout, commensurate for use. Some of the panels/collets have been solder repaired to the connecting links. The clasp appears to be of more yellowish hue and is functioning, with a filed area to one side, and the safety chain is later added. The principal collet set diamonds are well matched, bright and lively, but two of the diamonds have surface chips. The remaining principal diamonds have estimated VS2 to SI2 clarity and H to K colour, assessed mounted. Weight of principal diamonds approx. 0.08ct each. Smaller diamonds have variable colour and clarity, some stones with fractures/chips, but give a fairly lively appearance. Metal standard is untested and the bracelet is not marked. Gross weight approx. 6.5gm.
A blue zircon and diamond dress ring, the rectangular step-cut blue zircon in claw setting, between millegrain set shoulders of old and rose-cut diamonds, two colour precious metal mounted, total weight of old-cut diamonds approximately 0.25ct, ring size approximately ICondition report: The zircon has a mid greenish-blue hue, with chips and abrasion to facet edges and scuffs/scratches to the surface. The zircon measures approx. 10.7mm length x 7.8mm width x 6.5mm depth. Diamonds have variable facet symmetry and are fairly lively, but three of the old-cut stones have chips/surface-reaching fractures, with estimated J to K colour and SI2 to P2 clarity, assessed mounted. The outer rose-cut diamonds have a typically greyish, fractired appearance. The mount has a two colour shank (white interior/yellow exterior) and there is a worn mark, possibly 'PT'. The mount has scuffs, scratches, nicks and chips throughout, commensurtae for use, and the shank is off-round, with a solder join to the back. Solder joins are present at junctions within the setting, presumed to be part of manufacture. Metal standard is untested. Gross weight approx. 4gm.
A late Victorian/Edwardian half pearl and diamond crescent brooch, the row of graduated half pearls edged with old and single-cut diamonds, above a scalloped gallery, gold mounted, stamped '15CT', with later clasp fitting, (half pearls untested for origin), total diamond weight approximately 0.20ct, length 3.5cmCondition report: Half pearls are well matched, of creamy-white hues, all with surface wear. Some of the half pearls have linear scuffs, ripples and subtle fractures to the nacre surface. Half pearls graduate from approximately 4.2mm to 1mm in diameter. Diamonds have slightly variable colour and clarity but give an overall lively appearance, some stones with chips/fractures, estimated SI1 to P2 clarity and H to K colour, assessed mounted. Largest diamond weight approx. 0.04ct. The mount has general surface wear, nicks, scuffs and scratches, with a filed area to the inside. The visor safety clasp is later replaced and the pin/safety catch are currently functioning. Metal standard is untested. Gross weight approx. 8.1gm.
Two Victorian turquoise set dress rings, the first with turquoise and half pearl flowerhead clusters, 18ct gold mounted, hallmarked for Birmingham 1868, later inscribed to interior, the second with a turquoise and red stone flowerhead cluster, between turquoise set openwork foliate shoulders, gold mounted, (half pearls untested for origin), ring sizes K and L respectively (2)
A late Victorian/Edwardian diamond and gem set insect bar brooch, modelled with an old-cut diamond set cluster abdomen, thorax, wings and head, accented with cabochon ruby eyes, to a knife-edge bar with bouton pearl terminals, gold and silver mounted, (pearls untested for origin), total diamond weight approximately 0.40ct, length 3.25cmCondition report: Diamonds graduate from approximately 0.01ct to 0.08ct in weight and are mostly well matched with a bright and lively appearance, some stones with chips and surface-reaching fractures, estimated SI1 to P2 clarity and H to K colour, assessed mounted. The cabochon ruby eyes are scuffed and the bouton pearls have scuffs, nicks and surface blemishes. There is a fine seam/split to the base of the brooch pin hinge and the mount has general surface wear, commensurate for age and use, and patchy tarnishing. The pin is currently functioning. Metal standard is untested. Gross weight approx. 2.9gm.
A late Victorian diamond heart pendant, pavé set with a cluster of graduated cushion-shaped old and single-cut diamonds, bordered by rose and lasque-cut diamond points, above a scalloped gallery, the detachable bale highlighted with a trio of further old-cut diamonds, gold and silver mounted, suspended from a later trace-link chain, principal diamond weight approximately 0.80ct, total diamond weight approximately 3.50ct, pendant length 3.8cmCondition report: The principal diamonds are mostly well matched, bright and lively, some stones containing small mineral and fracture inclusions. Some of these inclusions are surface-reaching. Estimated H to K colour and VS2 to P1 clarity, assessed mounted. The largest diamond measures approx. 5.5mm in length x width and 4.4mm depth. Bordering smaller diamonds have more variable colour and clarity, some stones drawing greyish/brownish tints and with small surface chips/fractures. The mount has signs of general wear, with chips and scuffs throughout, thinning and occasional small splits to the edges of the setting and patchy wear to the tips of the grains. Gold and silver standard is untested and the mount is unmarked. Gross weight of pendant approx. 4.9gm. The later chain has surface wear and a replaced clasp that is not functioning. The chain is untested as gold/gilt metal, length 62cm. Gross weight of chain approx. 1.1gm.
A diamond cocktail ring, centred with a round brilliant-cut diamond in double claw setting, enclosed by crossover channels of marquise-cut diamonds in part collet settings, white precious metal mounted, (one diamond loose), principal diamond weight approximately 1.50ct, total diamond weight approximately 2.20ct, ring size NCondition report: The principal diamond is bright and lively, with a small pale surface-reaching fracture to the table facet that is difficult to see, estimated SI2 clarity and J to K colour, assessed mounted. Principal diamond dimensions approx. 7.6mm diameter x 4.3mm depth. Outer diamonds have slightly variable colour and clarity but give an overall lively appearance, with estimated SI1 to SI3 clarity and I to L colour, assessed mounted. Outer diamonds graduate from approximately 0.05ct to 0.02ct in weight. One of these diamonds is loose and will require re-setting. The ring mount has general wear, scuffs, scratches, nicks and chips throughout and the shank would benefit from re-polishing. The edges of the outer crossover settings have patchy wear and the central claws have been re-tipped. There is considerable build up of grease and dirt to the setting, which requires cleaning. Metal standard is untested. Gross weight approx. 7.8gm.
A diamond single stone ring, the round brilliant-cut diamond in eight claw setting, 18ct two colour gold mounted, diamond weight approximately 1.25ct, ring size MCondition report: The diamond is bright and lively, drawing a light yellowish tint, with estimated K to L colour and VS2 to SI1 clarity, assessed mounted. The ring mount is modern with light surface wear, and has been re-sized to the shank. Gross weight approx. 3.1gm.
A diamond full hoop eternity ring, set throughout with Swiss-cut diamonds, the white precious metal mount with French dog's head mark for platinum, total diamond weight approximately 0.80ct, ring size JCondition report: Diamonds have slightly variable clarity and colour but give a bright and lively appearance. Occasional stones have chips/fractures commensurate for regular use, the remaining diamonds have estimated VS1 to P1 clarity and H to K colour, assessed mounted. Each diamond weighs approx. 0.03ct. The mount has surface wear, scuffs, nicks and scratches throughout, with patchy thinning to the edges of the settings. The dog's head mark is rubbed. Metal standard is untested. Width of band approx. 2.4mm, depth approx. 1.6mm. Gross weight approx. 1.4gm.
A sapphire and diamond five stone ring, the alternate cushion-shaped sapphires and old-cut diamonds in millegrain collet settings, above a scalloped gallery, two colour precious metal mounted, total diamond weight approximately 0.25ct, ring size OCondition report: Sapphires are well matched, of mid to dark-blue hues with areas of faint whiteish colour zoning, all with surface abrasion, scratches, scuffs, chips and nicks. Largest sapphire measure approx. 4mm width x 3.5mm length x 2.4mm depth. Diamonds are well matched and lively but draw a light yellow tint, with estimated VS2 to SI2 clarity and K to M colour, assessed mounted. General surface wear to mount, with abrasion to the sides of the setting and thinning/occasional small splits to the edges of the collets. Solder seams to back of shank, probably due to re-sizing. There is a worn mark to the shank, possibly 'P?'. Metal standard is untested. Gross weight approx. 2.7gm.
WW1 Austrian Steel Combat Helmet, nice example of an Austrian steel combat helmet retaining much of the original light brown paint finish to the exterior and interior of the shell. Helmet with metal liner band and three leather liner pads. Original Austrian style chinstrap still attached. Stamped to the interior dome with the letter “K”. Overall a very good example.
An unmarked white gold diamond eternity ring, set with modern round brilliant-cut diamonds, total diamond content approx 0.75ct, settings test as 18ct, band width 3.1mm, size K, 4.5gNo damage or repair, all stones present, diamonds range in colour and some are tinted yellow with a few small internal fractures only visible through a loupe, settings lightly abraded, unmarked but test at 18ct
A Continental 14ct rose gold jade and pearl cluster ring, relief floral shoulders, setting height 21.3mm, size approx K, 5.4g No damage, all stones present, settings slightly worn on high points and lightly abraded all over with a join mark on back of shank, mark slightly rubbed, engraved 14k
A modern platinum 0.4ct Princess-cut solitaire diamond ring, diamond weight calculated from measurements: 4.30mm x 4.11mm x 2.92mm, colour approx J/K, clarity approx I1/I2, setting height 5.4mm, size P, 4gNo damage, diamond is relatively bright and fiery with 1 large internal fracture just under the table, settings quite worn with a section added on the back of the shank, hallmarks clear, stamped 900
A modern platinum solitaire diamond ring, 6-claw setting with diamond set shoulders and engraved bridge and shank, total diamond content approx 0.15ct, size K, 5.7gNo damage or repairs, all stones present, diamonds bright white and fiery, settings lightly abraded, marks clear, engraved pt950
A modern 9ct gold citrine and diamond dress ring, set with oval rose-cut citrine and modern round brilliant-cut diamonds, total diamond content approx 0.4ct, size K, 5gNo damage or repairs, all stones present, citrine has slightly rubbed facet edges, diamonds bright and white with a few internal inclusions, settings lightly abraded, hallmarks clear, stamped 375
A modern 18ct gold diamond band ring, channel set with double-row of modern round brilliant-cut diamonds, total diamond content approx 0.2ct, band width 4.1mm, size K, 3.8gNo damage or repairs, all stones present, diamonds bright white and fiery, settings very lightly abraded, hallmarks clear, stamped 750
An 18ct gold diamond square cluster ring, set with Princess-cut diamonds, total diamond content approx 0.5ct, setting height 7mm, size K, 5gNo damage or repairs, all stones present, diamonds relatively bright with a couple of tiny inclusions, settings lightly abraded, hallmarks clear, laser engraved 750
A modern 14ct white gold diamond bridal engagement ring set, comprising oval halo cluster and half eternity, set with oval mixed-cut and round brilliant-cut diamonds, total diamond content approx 1.05ct, by Neil Lane, halo setting height 11.6mm, size K, 5.7g total (2)No damage or repairs, all stones present, diamonds bright white and fiery, settings very lightly abraded, hallmarks clear, laser engraved 585
A late 20th century 18ct gold diamond cluster flowerhead ring, set with modern round brilliant-cut diamonds, total diamond content approx 0.28ct, setting height 9.4mm, size K, 2gNo damage or repairs, all stones present, diamonds bright white and fiery, settings very lightly abraded, hallmarks clear, stamped 750
A modern 14ct white gold diamond bridal engagement ring set, comprising halo cluster and half eternity, set with emerald and modern round brilliant-cut diamonds, total diamond content approx 1.51ct, by Neil Lane, halo setting height 8.5mm, size K, 6.4g total (2)No damage or repair, all stones present, diamonds bright white and fiery with no obvious inclusions, settings very lightly abraded, hallmarks clear, laser engraved 585
A 20thC walnut cased Ekco All electric radio TRG502 radiogram, 200-250 volts with E K Cole label, 38cm high, 59cm wide, 36cm deep, with other accessories, bulbs, Phillips box and others, etc. (a quantity)WARNING! This lot contains untested or unsafe electrical items. It is supplied for scrap or re-conditioningonly. TRADE ONLY
THREE BRACELET WRISTWATCHES (3)Comprising; a Chalet gold rectangular cased wristwatch, the caseback detailed 14 K, on a gilt metal fronted expanding metal bracelet, a Winegartens London 9ct gold cased lady's wristwatch, Birmingham 1977, on an expanding metal bracelet and a Tissot lady's wristwatch, on an associated 9ct gold braceletThe Tissot bracelet watch hand adjustment is very erratic and is not properly working, the springs to the bracelet are very worn, links gappy and floppy, gross weight of wristwatch 16.9 gms, when wound watch is ticking. Hairline scratches to caseback, dial and hands in good condition
A TITUS GOLD CIRCULAR CASED LADY'S WRISTWATCH AND ELEVEN FURTHER MOSTLY LADY'S WRISTWATCHES (12)The Titus wristwatch with a circular jewelled lever movement, detailed to the caseback exterior 18 K 0,750, gross weight excluding movement, but including dial cover 6.4 gms, a gold rectangular cased lady's wristwatch, detailed to the caseback exterior 14 K 0,585, a Halcyon Days Enamels lady's openfaced fob watch and nine mostly lady's wristwatches, including Jackson and Seiko Quartz
A GOLD CASED, KEYLESS WIND, OPENFACED FOB WATCHWith an un-signed gilt cylinder movement, gilt metal inner case, the floral decorated gilt dial with black Roman numerals, the case with engraved decoration, detailed within the caseback 18 K, case diameter 28.3mm, gross weight 20.1 gms, (the top suspension bow lacking)
A GROUP OF JEWELLERY (8)Comprising; a cultured pearl, coral and carved jade necklace, a single row necklace of cultured pearls, on a gold clasp, detailed 14 K, a Victorian mourning brooch, a silver miniature pendant compact, a heart shaped pendant locket detailed silver and three further itemsProvenance: Hylda and Lewis Gilbert, Sheldrake Place, London. Lewis Gilbert (d.2018), the celebrated film director, producer andscreenwriter, best known for his 007 James Bond movies and Alfie.
A GOLD AND LAPIS LAZULI SIGNET RING AND FOUR FURTHER RINGS (5)The lapis lazuli signet ring crest and motto seal engraved, detailed 14 K, ring size J and a half, gross weight 8.2 gms, a white gold ring, claw set with an oval jade, with carved and pierced decoration, detailed 9 CT, a gold ring claw set with a cut cornered rectangular step cut citrine, detailed 14 CT, ring size Q, a synthetic ruby and colourless zircon set three stone ring and a gold and silver, colourless gem set full eternity ring, detailed 9 CT SIL
Loading...-
137169 item(s)/page