A full-size Deadite soldier figure from Sam Raimi's comedy horror sequel Army of Darkness. In the film's finale, Ash J. Williams (Bruce Campbell) led the forces of the living against the army of deadites that Evil Ash (Bruce Campbell) raised to destroy them.The static figure is made of latex, foam and resin over a metal armature. It is painted in dark earthy colors to simulate rotted flesh, bone, and rusted armor. Bits of weathered cloth and resin armor have been used to dress the figure, which also features a helmet and carries a sword. The lot is in good overall condition with some signs of wear from production and age, including deterioration to the foam rubber and paint chipping. Dimensions: 69" x 14" x 9" (175 cm x 35 1/2 x 23 cm)Special shipping required; see notice in the Buyer's GuideEstimate: $1,200 - 1,800 Δ
We found 62920 price guide item(s) matching your search
There are 62920 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
62920 item(s)/page
A stormtrooper helmet from George Lucas' Star Wars: A New Hope. The stormtrooper is one of the most enduring and recurring designs in the Star Wars films, and was originally designed by Ralph McQuarrie and sculpted by Liz Moore.Approximately 56 standard helmets were created by hand from high-density polyethylene for filming, though only a small number still exist today. The helmets were all finished with glossy white paint, and additional linework and vent details were painted in by hand.This helmet is a rare example that retains its original first-film painted finish, with the original grey frown (it was not repainted for The Empire Strikes Back as others were.) The ears, mic tips and chinstrap are also original to the film. A replica green eye lens and black rubber strips around the forehead and neck have been added for aesthetic completion.Some of the original paintwork has cracked and worn away, most notably on the top, and there is fraying on the chinstrap. There is a crack on the right temple. Helmets with their original first-film paint finish and original ear pieces are exceedingly rare; less than five are believed to exist in private collections, including this never-before-offered example.Estimate: $60,000 - 80,000
A Spartan costume from Zack Snyder's historical action epic 300. King Leonidas (Gerard Butler) led his greatly outnumbered army of elite Spartan warriors against the invading forces of King Xerxes of Persia (Rodrigo Santoro).This lot includes a helmet, gauntlets, greaves, sandals, briefs, a cape, a shield, and a spear. The helmet is made of rubber with foam padding, painted to look like weathered bronze, and includes the name of stunt performer Mike Dopud handwritten inside. The matching gauntlets and greaves are made of urethane with foam padding and leather straps; and have the names of stunt performers Cody Laudan and Ryan Watson, respectively, written inside. The sandals, briefs, and the arm straps for the cape are made of brown leather, while the cape's buckle is bronzetone fiberglass and the cape is red-dyed canvas. The bronzetone, vacuum-formed plastic shield is weathered with simulated blood spatter and battle damage; while the rear of the shield features a brown canvas backing, leather and nylon straps, and a leather-bound handgrip. The spear is made of leather-wrapped wood, production-weathered, with a urethane head and resin rear, both painted gray to appear like dark metal. The lot is in good overall condition with some wear from production and age, including tearing in the back of the helmet, the front and back of the shield loosening from each other, the buckle loosening from the cape, and scuffing throughout.Special shipping required; see notice in the Buyer's GuideEstimate: $6,000 - 8,000
A production-made B-wing pilot helmet with a hand-painted blast shield from Richard Marquand's Star Wars: Return of the Jedi. The Rebel Alliance's B-Wing fighter pilots wore their helmets while trying to take down Death Star II during the Battle of Endor. Some B-wing pilot helmets were seen with visors or blast shields.This production-made helmet features an initial paint finish and a leatherette trim, and is constructed of vacuform plastic. There is an electronic cable connector present as dressing, and "A A" is marked on its interior. The painted and detailed blast shield component is also included. The lot is in good overall condition with some signs of use, including scuffed paint and stains to the helmet's interior. Dimensions (helmet): 11" x 8" x 8" (28 cm x 20.5 cm x 20.5 cm); (shield): 8" x 8" x 3" (20.5 cm x 20.5 cm x 7.75 cm)Estimate: $8,000 - 10,000
A production-made B-wing pilot helmet with an unpainted blast shield from Richard Marquand's Star Wars: Return of the Jedi. The Rebel Alliance's B-Wing fighter pilots wore their helmets while trying to take down Death Star II during the Battle of Endor. Some B-wing pilot helmets were seen with visors or blast shields.This production-made helmet features an initial paint finish and a leatherette trim, and is constructed of vacuform plastic, with loose wiring on the helmet intended to connect to a microphone. Also included is the unpainted blast shield. The lot is in fair overall condition with some signs of use and the shield torn at the center. Dimensions (helmet): 11" x 8" x 8" (28 cm x 20.5 cm x 20.5 cm); (shield): 8" x 11" x 3" (20.5 cm x 28 cm x 7.75 cm)Estimate: $8,000 - 10,000
A production-made Endor rebel trooper helmet from Richard Marquand's Star Wars: Return of the Jedi. Rebel troopers wore standard-issue, camouflage-friendly helmets during the Battle of Endor. This production-made but unfinished helmet is constructed of vacuformed plastic hand-painted green with a yellow arrow, red and black stripes, and splotchy white spots on the exterior, as well as brown paint and several pieces of tape applied to the interior. Its open-top, ring-shaped design was conceived by ILM model maker Paul Huston for the film. The helmet is in good overall condition with some adhesive residue on the interior and scuffed paint throughout. Dimensions: 11 1/2" x 9 1/2" x 4" (29.25 cm x 24.25 x 10.25 cm)Estimate: $10,000 - 15,000
A stunt Boba Fett (Jeremy Bulloch) helmet casting from the production of Richard Marquand's Star Wars: Return of the Jedi. After collecting the bounty on Han Solo's (Harrison Ford) head, Solo accidentally disabled Fett's jetpack and dropped the bounty hunter directly into the Sarlacc Pit. This two-piece white vacuformed plastic casting for a stunt version of the helmet as designed by Joe Johnston is production-made and unpainted. The pieces are joined together at the center with bits of adhesive residue around the ears. The vac-form helmet was made in consideration for stunt usage, but flexible rubber helmets were ultimately used instead. This helmet is in good overall condition with a few small dents and some liquid stains to the interior. Dimensions: 10 1/2" x 10 1/2" x 10 1/2" (26.75 cm x 26.75 cm x 26.75 cm)Estimate: $20,000 - 30,000
Pieces of Lando Calrissian's (Billy Dee Williams) skiff guard helmet test components from the production of Richard Marquand's Star Wars: Return of the Jedi. Calrissian disguised himself as one of Jabba the Hutt's barge guards to help free Han Solo (Harrison Ford) from carbonite. This set of six eggshell-color resin pieces are components from the monstrous face mask element of the skiff guard helmet, and were made during the design phase. "Lando Skiff Test" and the initials "T.C." are carved into the back of the large piece. The set exhibits some chipping and some adhesive putty residue from production, but it remains in good overall condition.Dimensions (largest): 7 1/2" x 5" x 2 1/2" (19 cm x 12.75 cm x 6.5 cm);(smallest): 1 1/4" x 3/4" x 1/2" (3.25 cm x 2 cm x 1.5 cm)Estimate: $1,500 - 2,500
A Stormtrooper costume from the Disney Plus sci-fi series Star Wars: The Mandalorian. Stormtroopers appeared throughout the series in costumes created by the 501st Legion, a fan group dedicated to creating screen-accurate Stormtrooper suits.This costume, a 501st original later worn during production, includes a hand-painted plastic helmet with a tinted green visor, a pair of plated plastic shoulder armor pieces with connected elastic straps, a plated plastic front and back body armor piece with a snap-button closure, a pair of rubber gloves with dense rubber plates, a plastic, polyester, and leather belt, a pair each of plastic thigh and leg armor, and a pair of leather Requisite boots (U.K. size 43), all in the signature Stormtrooper white with black and metallic details. A metal-studded leather blaster holster is also included, though holsters were removed from costumes and not used during filming of the show.The costume is in good overall condition with visible cracks throughout from wear, some frayed elastic, and bending to the visor.Estimate: $8,000 - 10,000
A Resistance soldier combat uniform with a helmet and weapon from James Cameron's sci-fi action sequel Terminator 2: Judgment Day. In the year 2029, Resistance soldiers battled against Skynet's machines in the rubble of post-Judgment Day Los Angeles.The uniform consists of a dark gray, cotton-blend jumpsuit with an elastic waist, zip-front, collar snap, various pockets throughout, and a sewn-on patch reading "L NF-54-863." Attached to the jumpsuit is a section of ribbed nylon-blend padding that covers the right chest, left shoulder, and wraps around the collar with a Velcro fastening. The metal helmet is painted dark gray to match the uniform, and features added details such as knobs and switches, a padded interior, a microphone with a long audio plug, and a pair of prop night-vision goggles on adjustable arms that allow them to be raised and lowered. Inside the helmet is a piece of tape with the number "8" handwritten on it and labels including one listing the month and year as "NOV 1990." The prop gun is a plastic Muzzelite bullpup stock with an attachable scope. The lot is in good overall condition with some wear from production and age, including scuffs and cracks to the plastic elements of the helmet and gun, loose wires in the helmet, Ruger parts and ammunition clip missing from the gun, and extensive staining to the jumpsuit both from intentional distressing and general wear.Contains electronics; see electronics notice in the Buyer's GuideEstimate: $4,000 - 6,000
Leonard "Wolfman" Wolfe's (Barry Tubb) fighter pilot helmet from Tony Scott's action drama Top Gun. Wolfman wore his helmet while attending Top Gun and participating in several combat missions as Rick "Hollywood" Neven's (Whip Hubley) Radar Intercept Officer.This helmet is constructed of resin painted red and affixed with five yellow, blue, white, and silvertone star insignia stickers. It features a stencil residue reading "WOLFMAN  ," a tinted plastic visor, black leatherette padding, a Velcro chin strap, an incomplete breathing cable affixed on the left side, and two metal tags labelled "Flight Suits, LTD. El Cajon, California." Handwritten inside the helmet are the words "Top Gun", "Sun Down" (crossed out), and "Merlin #2", implying that the helmet was intended to be Sun Down's (Clarence Gilyard Jr.) or Merlin's (Tim Robbin's) at one point. The helmet is in good overall condition with various signs of wear, including cracking to the padding, tears to the stickers, and damaged paint throughout.Dimensions: 10" x 10" x 11" (25.5 cm x 25.5 cm x 28 cm)Estimate: $8,000 - 10,000 Δ
Pete "Maverick" Mitchell's (Tom Cruise) fighter pilot helmet from Tony Scott's action drama Top Gun. Renegade pilot Maverick wore his helmet while attending Top Gun and participating in several combat missions with his RIO, Nick "Goose" Bradshaw (Anthony Edwards).This real-world flight helmet was decorated specifically for the character and is affixed with Maverick's signature silvertone, red, and yellow striped eagle insignia stickers. It features "Maverick" stickered in white on the front and reverse, a tinted plastic adjustable visor, black leatherette padding, a Velcro chin strap, and two metal tags labeled "Flight Suits, LTD. El Cajon, California." A green rubber oxygen mask and tube is included to complete the display, but is not original to the film. The helmet is labeled "Maverick - #1" underneath the interior padding in a manner consistent with all documented original Top Gun helmets. It includes a signed letter of authenticity from Jim Tyson, the costume supervisor on the film, detailing the creation of the film's helmets, their various whereabouts after production, and confirming that this helmet was one of only three made specifically to fit Tom Cruise himself.  The helmet exhibits various signs of wear, including scratching to the paint and stickers, as well as some cracking padding and resin, but remains in good overall condition.Dimensions: 10" x 10" x 11" (25.5 cm x 25.5 cm x 28 cm)Estimate: $50,000 - 70,000
Marcus Corvinus' (Tony Curran) armored costume from Len Wiseman's action-horror sequel film Underworld: Evolution. Corvinus was the founder of the Death Dealers and progenitor of the entire Vampire species. He wore his armor in battle during the early 13th century.The costume consists of metal torso armor, shoulder armor, arm armor, and hand armor, with black leather gloves and black leather straps. It also includes studded black leather pteruges over a matching black skirt, pointed silvertone metal boots with greaves, and a silvertone metal helmet with long black and brown hair, braided strands, and two faux brown fur ornaments. All of the metal armor includes decorative line work and the letter "M" on either side of the helmet. Most of the armor is labeled for "Marcus," with a single label for "Mike" and one for "Soren." The lot is in excellent overall condition with minimal wear from production outside of the intentional weathering.Estimate: $2,000 - 3,000
An Alliance foot soldier's armor with a sword and shield from Legendary Pictures' video game adaptation Warcraft. After seven human kingdoms of Azeroth formed an Alliance with the dwarves, elves, and gnomes against the invading orc Horde, their foot soldiers wore armor into battle. This set of armor consists of a tufted, foam-padded resin helmet labeled "BID;" two padded leather and resin pauldrons numbered "11/12;" a two-piece, padded flexible resin and leather cuirass marked "40" and "50;" a chain-link and Spandex zip-up tunic with leather cuffs; a pair of padded resin and leather vambraces; a pair of brown, plated resin and leather gloves; a plated resin fauld with a leather and metal buckle; a brown leather belt; a pair of resin-plated urethane and rubber boots (US size 9); a resin sword with a blue urethane gem in the hilt; and a rubber shield with leather straps, all in blue and silvertone Alliance colors. The set is in good overall condition with signs of wear throughout, including scuffing and some grime.Estimate: $7,000 - 9,000
Attica, Athens 510-505 BC,Ar tetradrachm, 17.69g, archaic period. O. head of Athena right, wearing crested helmet and earring, R.Owl standing to right with AOE to right, olive spray in upper field to the left, all within incuse square. Sear 1837. Very fine and centrally struck in high relief (1)Footnotes:Ex Seaby's 1960's.For further information on this lot please visit Bonhams.com
Sicily Syracuse 344-317 BC,Ar stater, 3rd Republic, weighs 8.67g. O. Pegasus flying left, R.head of Athena right, wearing Corinthian helmet. G.C.V 961 variety. S.N.G 711. Extremely fine with golden toning. (1)Footnotes:Ex Triton VIII 89.This lot is subject to the following lot symbols: ** VAT on imported items at a preferential rate of 5% on Hammer Price and the prevailing rate on Buyer's Premium.For further information on this lot please visit Bonhams.com
Greece, Anactorium 300-250 BC,Ar stater, weighs 8.48g. O. Pegasos flying left with pointed wing. AN monogram below. R. head of Athena left, wearing Corinthian helmet. G.C.V 2254 variety. Good very fine. (1)This lot is subject to the following lot symbols: ** VAT on imported items at a preferential rate of 5% on Hammer Price and the prevailing rate on Buyer's Premium.For further information on this lot please visit Bonhams.com
Athens 5th century BC,Ar tetradrachms (2) O. head of Athena right, wearing crested helmet. R. owl standing right with olive twig and crescent AOE to right. G.C.V 2526. Both very fine. (2)This lot is subject to the following lot symbols: ** VAT on imported items at a preferential rate of 5% on Hammer Price and the prevailing rate on Buyer's Premium.For further information on this lot please visit Bonhams.com
Nero AD 54-68,Ae's (9) including dupondi. R. Roma seated left; Victory advancing left; Asses, R. temple of Janus (3); Victory alighting left; Quadrans, owl on altar; Column with helmet. Fine to very fine. (9)This lot is subject to the following lot symbols: ** VAT on imported items at a preferential rate of 5% on Hammer Price and the prevailing rate on Buyer's Premium.For further information on this lot please visit Bonhams.com
Indian Army, Late Victorian Headdress Badges,17th Bengal Infantry unmarked silver pagri badge, 13th Madras Infantry heavy gauge die-cast bronze helmet badge, 7th Madras Infantry gilding metal with yellow cloth centre backing, 56th Bengal Native infantry, large size thin gauge sheet brass numerals,56', typical 'Indian' style pierced brass fasteners (raised in 1824, mutinied at Cawnpore in 1857), Bombay Pioneers gilding metal, 2 x 9th Madras Infantry, gilding metal, very good condition. (7)For further information on this lot please visit Bonhams.com
Cnut,Penny, 0.99g, York, helmet type, BMC XIV, bust left wearing pointed helmet, R.short cross voided, broken annulet enclosing pellet in each angle, CETEL MO EOFR*IC (N.787; S.1158). Very fine or better. (1)This lot is subject to the following lot symbols: ** VAT on imported items at a preferential rate of 5% on Hammer Price and the prevailing rate on Buyer's Premium.For further information on this lot please visit Bonhams.com
Cnut,Penny, 1.06g, helmet type, BMC XIV, diademed bust left, with sceptre, R.short cross with annulets in each angle (N.787; S.1158). Small split, otherwise fine or better. (1)This lot is subject to the following lot symbols: ** VAT on imported items at a preferential rate of 5% on Hammer Price and the prevailing rate on Buyer's Premium.For further information on this lot please visit Bonhams.com
Cnut,Penny, 1.08g, helmet type, BMC XIV, bust left wearing pointed helmet, R.short cross voided, broken annulet enclosing pellet in each angle (N.787; S.1158). Small splits, otherwise very fine. (1)This lot is subject to the following lot symbols: ** VAT on imported items at a preferential rate of 5% on Hammer Price and the prevailing rate on Buyer's Premium.For further information on this lot please visit Bonhams.com
British Military Headdress Badges,fine quality period issues, including Victorian period items; R.Marine Artillery Helmet Grenade; Army Hospital Corps Shako, Plate 1861-68; Army Ordnance Corps, large shield pattern. Cap Badges (Vict) Border, Dorsetshire, South Staffs, Devons, 20th Hussars, 7th Hussars, Royal Fusiliers, APC, Yorkshire Regt, Home Counties Reserve Regt, Rifle Brigade (small size), 13th Hussars, 19th Hussars (single scroll). Good selection of Edwardian period & WW1 issues. Two large size K/C period Royal Navy Officers' Cap Badges, Fincastle's Horse, 31st Coy Imperial Yeomanry, NACB cap Navy Army Service Women Canteens 1917, East Kent Yeomanry, Silver cap badge by JRGs etc. (74)For further information on this lot please visit Bonhams.com
Star Wars Emperor Palpatine Cold-Cast Porcelain Bust, by Legends In 3 Dimensions, Riddell Stormtrooper Miniature Helmet, in original boxes, two scratch built Episode 1 Pod Racers mounted on wooden bases and three hand painted large scale resin figures on stands, two bronzed, F-E, pod racers with some damage, boxes F-G (7)
A Collection of Metalwares to include Three Branch Candelabra (Re-soldered) Helmet Shaped Salt, Lidded Butter Dish with Cow Finial, Tudor Mint The Powerful Dragon Ornament, Kingfisher Ornaments, Rosebowl, Photo Frame, Horse and Fence Card Holder, Boxed and Loose Cutlery, Boxed Letter Opener Etc
-
62920 item(s)/page