We found 566841 price guide item(s) matching your search
There are 566841 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
566841 item(s)/page
Lot 754
Corgi Toys two boxed Film related cars, Corgi Toys 261 James Bond Aston Martin D.B.5 from the Film “Goldfinger” gold body, with working ejector seat, rear bullet screen, retractable machine guns, complete with opened secret instructions, leaflet with two bandit figures, missing cloth lapel badge, model is in very good used original condition, inner display card has plain orange base, in very good bright original condition, some slight age wear, outer-box is in fair to good original condition, Corgi Toys 497 The Man From Uncle Gun Firing “Thrush Buster” Oldsmobile, metallic blue, cast wheels, cast spot lights, in very good used original condition, with inner packing card, Missing original 'Waverly' ring and card ring to roof, inner card display stand is in good condition but missing end flaps on one end and an poor outer box with missing end flaps. (2 items).
Lot 97
A FRENCH LOUIS XV ORMOLU CARTEL TIMEPIECEJEAN-BAPTISTE BAILLON, THE CASE POSSIBLY BY JEAN-JOSEPH DE SAINT-GERMAIN, PARIS, MID 18th CENTURYThe four columnar pillar single train movement now with anchor escapement regulated by disc bob pendulum with silk suspension, the backplate with pillars pinned at the rear and signed J.B. Baillon AParis to lower edge, the 5.5 inch slightly convex white enamel Roman numeral dial signed J'N BAPTISTE, BAILLON to centre within chapter ring incorporating raised gilt fleur-de-lys half hour markers and with Arabic five minutes beyond the minute track, with very fine scroll pierced and engraved gilt brass hands set behind hinged convex glazed cavetto moulded cast gilt brass bezel, the case richly cast with generous stylised foliate scrolls with fluted pierced architectural rococo surmount over a series of full-height open leafy floral sprays entwined at the base and rising to envelop the sides, incorporating flowerhead decorated brass lattice grille fret infill behind the foliage and with further mesh panels beneath the dial, the rear flush-finished incorporating hinged circular panel to access the movement, (previously with silent-pull quarter repeat mechanism - now removed).52cm (20.5ins) high, 27cm (10.5ins) wide, 12cm (4.75ins) deep. Jean-Baptiste Baillon was the third generation in a family of clockmakers to carry his name and became one of the most celebrated Parisian clockmakers of the mid 18th Century. In 1727 he was received as 'Valet de Chambre-Horloger Ordiniaire de la Reine' and was elevated to 'Premier Valet' after the death of Claude Martinot in 1744. By this time he was working from Place Dauphine (from 1738) but relocated to Rue Dauphine in 1751. In 1753 Ferdinand Berthoud described Baillon's workshops as the 'finest and richest Clock Shop'. Baillon employed the leading case makers of the day including J. B. Osmond, Jean Joseph de Saint-Germain and B. Lieutaud. Jean-Baptiste Baillon died in 1772, by this time he also held the position of 'Premier Valet de Chambre-Horloger Oridinaire de la Dauphine' and Marie-Antoinette. The form and detailing of the generous rococo scrollwork within the case of the current lot, together with the inclusion of flowerhead decorated lozenge grille frets, are comparable to related features on a case attributed to Jean-Joseph de Saint-Germain, for an important musical clock by Baillon, which was sold at Artcurial, Paris, 20th May 2019 (lot 33). Jean-Joseph de Saint Germain was born in Paris 1719 and by the mid 1740's had become established at rue Saint-Nicolas where he was described in a trade directory as a 'master in chasing, modelling and founding, makes and sells all kinds of boxes and bases in tortoiseshell, gold, bronze, cabinet fittings, fire irons, grills, chandeliers, girandoles, pendulum bases, cartel clocks of all kinds, elephant, lion, bull and other wax models at a fair price'. Perhaps his most famous product were his rhinoceros clocks which were much favoured by the French Royal family which were modelled on an animal named Clara who was imported into Rotterdam by the Bengal Director of the VOC in 1741 and toured Europe until her death in 1758. Jean-Joseph de Saint-Germain retired in 1776.
Lot 233
A FINE AND RARE PAIR-CASED VERGE FUSEE STRIKING CLOCK-WATCHTHOMAS TOMPION, LONDON, CIRCA 1697, THE DIAL AND CASES LATERThe gilt full plate movement with three tulip and two narrow vase pillars pinned through the backplate, the fusee going train with scroll-pierced stop-iron block and verge escapement regulated by sprung three-arm balance with Tompion type regulation, the locking plate controlled strike train with fine scroll pierced and engraved standing barrel, foliate sculpted steel detent gates and sounding via a hammer positioned beneath the spring barrel on a bell fitted to the interior of the case, the backplate with symmetrical foliate scroll pierced and chased cock decorated with a female mask at the junction with the conforming pierced foot, flanked by silvered regulation disk set within further applied engraved fretwork opposing silvered countwheel with concentric leaf engraved centred and numbered divisions, next to signature Tho: Tompion, London with number 83 engraved just above the concentric ring-turned blued steel strike stop-work wheel partly concealed by the balance cock, now with slightly convex white enamel Roman numeral dial incorporating twin gold collected winding holes to centre and arcaded minute ring with Arabic five minutes above the hour numerals, with fine sculpted gold beetle and poker hands, now in silver-gilt inner case with pierced and engraved scrolling foliate decoration to rear, suspension post and ring at twelve o'clock and fitted with convex glass to bezel, with a leather covered gilt brass outer case with crisp mouldings to bezel surround and waist.The pillar plate 35mm (1.375ins) diameter; the outer case 5.5cm (2.125ins approx.) diameter. Provenance: The property of a private collector, purchased Sotheby's New York sale of The Thielmann Collection of Watches, Clocks and Scientific Instruments 26th June 1989 (lot) 301 for $2,750 USD. Previously in the Wertheimer Collection. Thomas Tompion has often been referred to as the 'father of English clock and watchmaking'. When considering the legacy of his work and influence on subsequent generations, such a compliment is justly deserved. Born in Ickwell, Suffolk in 1639 Thomas Tompion appears to have developed an affinity for metalworking from his father, also named Thomas, who worked as a blacksmith. By 1670 Tompion had moved to London and was working in the clock and watchmaking trade. Although there is no record of his apprenticeship or whether he received any formal training prior to moving to London, he quickly became established and obtained his freedom of the Clockmaker's Company in late 1671. His early clocks demonstrate a close working relationship with the Fromanteel, East and Knibb workshops. Around this time Tompion became friendly with eminent mathematicians and scientists such as Robert Hooke and Jonas Moore - perhaps the most progressive and inventive minds of the day. Such associations lead to Royal commissions, firstly from Charles II for whom Tompion is known to have made one of the earliest balance-spring watches in 1676 and later William III who ordered numerous clocks to furnish his various palaces throughout his reign. As well as being an extremely talented artisan Tompion was also commercially minded, cleverly introducing serial numbering for his watches and clocks from around 1681/2. This, as well as maintaining a high degree of refinement in both the design and construction of his clocks and watches, ensured the highest level of exclusivity for clients purchasing from him. In around 1701 Thomas Tompion took a former apprentice, Edward Banger, into partnership. Banger was originally apprenticed to Thomas Ashby in 1687 but was transferred over to Tompion and gained his freedom of the Clockmaker's Company in 1695. He was clearly a talented maker (when considering the few examples signed by Banger alone) however a serious problem between him and his former master caused the partnership to come to an abrupt end in 1707-8 for reasons unknown. On Banger's departure Tompion reverted to working alone until he found confidence in George Graham who had been engaged as a journeyman for Tompion since 1696. Graham's character had already been given the seal of approval by Tompion who allowed him to marry his niece, Elizabeth, in 1704; however it still would be a few years before Tompion would take Graham into partnership which he eventually did in 1711. Thomas Tompion died in November 1713 leaving the business to George Graham who maintained the same exacting standards and became famous in his own right with notable achievements including the development of the deadbeat escapement for pendulum clocks and the cylinder escapement for watches. Of Tompion's known surviving work as recorded by Jeremy Evans in Evans, Jeremy, Carter, Jonathan and Wright, Ben THOMAS TOMPION, 300 YEARS only twenty-one clock-watches are noted. Three of these are signed by Tompion in partnership with Edward Banger and of the remaining eighteen only around four retain their original dials and cases. An almost identical movement, The Bridgeman Tompion Clock-watch (numbered 73 and dating to 1696), is illustrated by Evans, Carter and Wright on page 58. Condition Report: Movement is in fine clean fully working condition having being recently conserved with following work done (as per the watchmaker's worksheet):Movement overhauled, cleaned, lubricated; case and dial cleaned.Replacement locking lever spring and screw made and fitted using existing crew and steady pin holes.New mainspring fitted.New strike spring fitted.Various screws renewed with hand-made replacements.Fusee pivot upper bushing re-bushed, wear in strike train addressed.Central bell-mounting boss repaired and fitted with new securing screw.Cracked blade to the locking gate renewed with a hand-made replacement.All the above work has been executed to the highest standard hence with any replaced screws matching the originals in shape and quality and repairs very sensitively executed. The dial enamel has a slight crescent-shaped crack to the edge above the X numeral otherwise is free from visible faults. The inner case is in fine original condition but with overall noticeable thinning to the gilding. The outer case is in good original condition with only minor scuffs to the leather covering and some rubbing to the gilding.Watch has a winding key included. Condition Report Disclaimer
Lot 237
A FINE GEORGE III GOLD PAIR-CASED POCKET WATCH WITH CYLINDER ESCAPEMENT AND CALENDARTHOMAS MUDGE, LONDON, 1763The gilt full plate single fusee movement with four square section baluster pillars pinned through the backplate, scroll-pierced stop-iron block and cylinder escapement regulated by sprung three-arm steel balance with Tompion type regulation, the backplate with fine asymmetric foliate scroll pierced and engraved balance cock with faceted diamond endstone, canted leaf-bordered rim and grotesque mask at the junction with wedge-shaped relief engraved foot, flanked by silvered regulation disc set within adjacent applied scroll engraved panel infill opposing signature Tho's Mudge, London and numbered 182, with gilt brass dust cover similarly signed Tho's Mudge, London and slightly convex white enamel Roman numeral dial incorporating rare date-of-the-month aperture to centre, Arabic five minutes to outer track and with sculpted steel beetle and poker hands, the gold inner case applied with suspension post and ring at twelve o'clock, fitted with convex glass to bezel and marked for London 1763 maker P.M, the associated outer case marked for London 1752 maker Mb. The pillar plate 3.5cm (1.375ins approx.) diameter; the outer case 5cm (2ins) diameter. Thomas Mudge was born in Exeter, Devon in 1717 and was apprenticed to George Graham before setting himself up in business at 151 Fleet Street, London in 1748. At around the time of the death of his former Master in 1751, Mudge was joined in partnership by a fellow former apprentice of Graham, William Dutton, who is recorded in Baillie, G.H. Watchmakers & Clockmakers of the World as apprenticed in 1738 and gaining his freedom of the Clockmakers' Company in 1746. The business subsequently traded from 148 Fleet Street and Mudge, whilst in partnership with Dutton, rapidly acquired a reputation as one of England's outstanding watchmakers. In around 1755, if not earlier, Mudge invented the detached lever escapement, which he first applied to a clock, but when incorporated into a watch became the greatest single improvement ever applied to them. In 1765 Mudge published the book Thoughts on the Means of Improving Watches, Particularly those for Use at Sea, and the following year, alongside Dutton, was elevated to Liveryman. In around 1771 Thomas Mudge retired to Plymouth in order to spend more time to pursue his development of a marine timekeeper. The first of these went on trial in 1774 where it performed superbly leading to an award of 500 guineas. Mudge went on to complete two others in 1779 in the continuing attempt to satisfy the increasingly difficult requirements set by the Board of Longitude. They were tested by the Astronomer Royal, Nevil Maskelyne, and declared as being unsatisfactory. There followed a controversy in which it was claimed that Maskelyne had not given them a fair trial. A similar controversy had arisen when John Harrison had been denied the full amount of the 1714 prize by the Board of Longitude. Eventually, in 1792, two years before his death, Mudge was awarded £2,500 by a Committee of the House of Commons who decided for Mudge and against the Board of Longitude, then headed by Sir Joseph Banks.The cylinder escapement was developed in around 1695 by Thomas Tompion and further refined by George Graham in 1726. This new escapement was perhaps the first developed exclusively for watch work and, as well as being a better rate keeper, the cylinder escapement also allowed movements to be made more compact (due to the escapement operating in one plane only). However, being a form of frictional rest escapement, the cylinder escapement was prone to relatively heavy rates of wear hence was less reliable than the verge (until hardened steel escape wheels and ruby cylinders were developed later in the 18th century). Condition Report: Movement is in clean working condition with strong gilding and minimal marks to the backplate. The escape wheel appears to be a service replacement otherwise all appears original and the calendar is operational. The dust cover is original and in good condition with only very slight oxidation to blued steel slide. The dial has some slight chipping around the thumb lever to the lower edge; the hands are original and very nicely finished. The inner case is in good condition with relatively light age-related wear however the bezel appears to be very slightly different in colour so may well be a very well-made replacement and the glass appears relatively recently fitted. As catalogued the outer case is associated but is a very good fit.There is no winding key present. Condition Report Disclaimer
Loading...-
566841 item(s)/page