We found 460315 price guide item(s) matching your search
There are 460315 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
460315 item(s)/page
A mid 19th Century French four-glass mantel clock the gilt brass case with door to front and back fitted a white enamel dial with Roman numerals signed Henri Moine, Galerie de Valois 124 Palais Royal, the eight day movement striking on a bell No 5391 and signed Henrie Moine Paris on the back plate, 38cm (15") high
A LATE 19TH CENTURY MAHOGANY CASED LANCET MANTEL CLOCK the French eight day movement striking on a gong, the white dial with Arabic numerals and pierced gilt metal hands, signed C.W Boothby, Scarborough, the case inlaid with satinwood strap work, flowers and harebell be-ribboned swags around the dial with fretted sound panel to each side, on a moulded plinth raised on four gilt metal bun feet, 33cms high
** A 19TH CENTURY FRENCH GILT METAL PORTICO CLOCK of eight day movement striking the hour and half hour on a bell, the drum shape case with an enamel 11cm dial, signed Sacre a Paris, eagle and foliate cresting, supported on fluted circular pillars, on an oval base raised on turned feet (previously under a glass dome) 41cms high
A 19TH CENTURY PARIS GILDED BRASS FOUR GLASS CARRIAGE CLOCK with hour and five minute repeat, striking on a gong, the silver chapter ring with Roman numerals signed John Hall, Paris with blued steel hands, the facia and side panels with gilt metal filigree of birds amongst trailing leafage, the back plate stampedG L in an oval, 20cms high over handle, in original leather case with sliding front inscribed 'The Moving finger writes, and, having writ, moves on'.
A 19TH CENTURY GILT METAL AND MARBLE MANTEL CLOCK of eight day movement striking on a bell, the enamelled dial with blue Roman numerals and black Arabic numerals, stamped to the back plate ÒMedaille d'Argent, Venic.... et ci”, the oval case surmounted by a bronze figure of a satyr playing cymbals, on toupie feet, 40cms high.
A FRENCH BOULLE AND ORMOLU BRACKET CLOCK of eight day striking movement signed Vincenti, the cast dial with enamel Roman cartouche chapters and outer seconds ring, over a pierced figural spandrel signed Balthazar Paris, the caddy top case with flambŽ finials, telamon mounts and raised on four toupie feet, 59cms high.
A LATE 18TH CENTURY MAHOGANY LONGCASE CLOCK of 8 day movement, the 27.5cms brass dial with silver chapter ring and Roman numerals, seconds dial and date aperture, the spandrels cast as cherubs and leafage; the pagoda hood with three re-painted ball finials, glass door flanked by reeded and brass inlaid pilasters, the trunk with long door above a moulded panel and shaped apron, on bracket feet 228cms high.
A 19TH CENTURY MAHOGANY LONGCASE CLOCK of 8 day striking movement, lacking bell, the 30.5cms brass dial with calendar dial to the arch, the chapter ring with black painted Roman numerals, cherub head and trailing leaf cast spandrels, the dial bears engraving 'Windmill, London'; the associated continental case having a rectangular hood with arched cornice above the glass door, flanked by reeded pilasters, the trunk door with applied moulding, on reeded supports with shaped feet, 234cms high.
A late 18th/early 19th Century long cased clock, the square brass dial with scroll mask spandrels with brass chapter ring, Roman numerals, dial inscribed John Richars Wisbech, eight day movement with seconds hand and date aperture, the square hood with twin pilasters over heavily carved long door and carved base
An ebonised cased self-recording aneroid barometer/weather station Mottershead & Co, Manchester, late 19th century The single fusee eight-day timepiece movement with 7 inch circular silvered Roman numeral dial with subsidiary seconds dial and signed MOTTERSHEAD & CO. MANCHESTER to centre opposing an aneroid barometer similarly signed to centre, with rotating paper scale lined barograph drum driven by the clock and with pencil pointer linked to the aneroid barometer and moved by the timepiece to mark the paper scale every hour, in glazed front case with moulded base and applied with ivorine trade plate to apron, lacking thermometer and barometer hand, 42cm high, 67cm wide, B.C. Ref. 288. Illustrated in Banfield, Edwin BAROMETERS Aneroid and Barographs page 113. Mottershead & Co are recorded by Banfield as working in Manchester circa 1870-90.
A mahogany cased portable barograph Short & Mason, London, second quarter 20th century With thirteen-part vacuum chamber within gilt finish brass armature operating inked pointer for the rotating paper scale lined drum housing seven-day lever clock movement MANUFACTURED BY THE HORSTMAN GEAR CO. LTD., the latched hinged two-glass cover with brass carrying handle, on plain plinth base with spare pointer drawer to one end and pad feet, 32cm wide, B.C. Ref 295. Illustrated in Banfield, Edwin BAROMETERS Aneroid and Barographs page 129.
A cast iron combination wall clock and barometer with thermometer J.J. Wainwright & Co, Birmingham, late 19th century The clock with eight-day bell-striking movement and white enamel Roman numeral dial set into a waisted foliate cast case with Fahrenheit and Reaumur scale mercury thermometer to upright and aneroid barometer with 3.75 inch white paper circular register signed J.J. WAINWRIGHT AND CO. Birmingham with brass setting pointer to glass to the oak leaf and urn surmount decorated crest, 67cm high, B.C. Ref. 283. Illustrated in Banfield, Edwin BAROMETERS, Aneroid and Barographs page 97.
An ebonised and brass cased desk clock barometer Negretti & Zambra, London, late 19th century The timepiece with eight-day French cylinder movement and white circular Roman numeral dial opposing a conforming aneroid barometer with mercury tube Fahrenheit thermometer signed NEGRETTI & ZAMBRA, LONDON to the ivory scale mounted onto scroll profile ebonised stand with ogee moulded and stepped base, 19cm high, B.C. Ref. 285. Illustrated in Banfield, Edwin BAROMETERS Aneroid and Barographs page 99. The firm of Negretti & Zambra are recorded by Banfield as working from circa 1850 when the partnership between Enrico Negretti and Joseph Warren Zambra was formed.
A William & Mary walnut cistern tube stick barometer in the manner of John Patrick Unsigned, circa 1695. With arched pediment and fretwork upright flanked by twist turned columns above silvered herringbone border and foliate engraved two-part break-arch scale with brass setting pointer above cavetto moulded throat and exposed tube flanked by crossbanded veneers and cavetto moulded edge above fretwork flared side panels and half-round ring-turned cistern cover with ogee moulded underside, 120cm high, B.C. Ref. 2. Illustrated in Banfield, Edwin BAROMETERS Stick or Cistern Tube page 17. The decorative hood superstructure which incorporates spiral twist columns emulates the design of longcase clock from the end of the 17th century and bears similarities to examples depicted in John Patricks advertisement of circa 1710 reproduced in Goodison, Nicholas English BAROMETERS 1680-1860 page 48. Although this configuration appeared to be popular well into the first two decades of the 18th century, Banfield suggests (BAROMETERS Stick or Cistern Tube page 18) that the use of fretwork in the case indicates a date prior to 1700.
A George III oak bulb cistern tube stick barometer Dominick Manticha, London, circa 1780. With shallow cavetto moulded cornice above arch top glazed foliate decorated paper scale signed Manticha Fecit, LONDON with simple brass pointer and flanked by turned pilasters, the plain trunk with concealed tube above longcase clock form plinth base enclosing the cistern, 93cm high, B.C. Ref. 33. Illustrated in Banfield, Edwin BAROMETERS Stick or Cistern Tube page 85. Dominick Manticha is recorded by Banfield as working from 11 Ely Court, Holborn, London 1781-1805. The paper scale utilises the same basic print as the scale signed A. Routledge used on Lot 139).
A Regency mahogany mercury wheel barometer with timepiece Hudson, Greenwich, circa 1820. The 10 inch circular silvered register calibrated in inches and with star engraved centre beneath 4 inch circular white Roman numeral clock dial, arched Fahrenheit scale alcohol thermometer and swan neck pediment, the rounded base with spirit level signed HUDSON GREENWICH and ivory setting pointer adjustment disc, 109cm high, B.C. Ref. 130. Illustrated in Banfield, Edwin BAROMETERS Wheel or Banjo page 53. The firm of Hudson & Son are recorded by Banfield as working circa 1800-1900, they were instrument makers to the Admiralty, the Royal Naval College and the Royal Observatory.
A fine William IV large rosewood mercury wheel barometer with timepiece French, London, circa 1830. The 12 inch circular silvered register calibrated in inches and with star engraved centre beneath 6 inch silvered Roman numeral clock dial signed French Royal Exchange, London to centre and with regulation slot at 12 oclock fronting a circular pillar single fusee movement with platform lever escapement to front-plate, with bowfronted Fahrenheit scale mercury thermometer and hygrometer to the break-arch pedimented case above, the cavetto moulded base with spirit level repeat signed FRENCH ROYAL EXCHANGE and with ivory setting pointer adjustment disc, 125cm high, B.C. Ref. 156. Illustrated in Banfield, Edwin BAROMETERS Wheel or Banjo page 89. Santiago James Moore French is recorded by Banfield as working from his Royal Exchange address 1810-40. He was primarily a clockmaker specialising in small high quality mantel clocks.
A George II mahogany cistern tube stick barometer James Verrier, North Curry, circa 1750. With three brass ball finials to the ogee moulded break-arch pediment and frieze above glazed conforming shaped-top foliate engraved silvered double scale with herringbone border, titled SOMMER and WINTER and inscribed Fair if rise and Foul if Fall above signature Jams Verrier, North Curry to lower margin, the Winter scale with brass setting pointer adjusted via a brass disc to the right-hand side of the trunk, flanked by turned three-quarter pilasters with brass capitals and bases above cavetto moulded throat and recessed exposed tube to the trunk, the square panel base with moulded upper and lower edges and centred with a turned rosette, 105cm high, B.C. Ref. 9. Illustrated in Banfield, Edwin BAROMETERS Stick or Cistern Tube pages 46 and 47 and described on page 49. James Verrier is recorded by Banfield as working in North Curry, Somerset circa 1750. A.J. Moore records him in THE CLOCKMAKERS OF SOMERSET 1650-1900 as working 1752-1774 and describes him as a maker of very fine clocks. Moore also reproduces an account of a clock described in Western Flying Post July 28th 1755 which appears to be perpetually driven by either changes in temperature or possibly barometric pressure. The form of this particular barometer strongly resembles that of a longcase clock, perhaps reflecting Verriers primary occupation. The scale is unusually annotated with Changeable against 29 inches rather than at the usual 29.5 inches, Banfield suggests that this may either be an honest error by the maker or specifically made to compensate for the original owner living at around 500 feet above sea level.
A Regency oak and mahogany bulb cistern tube stick barometer J. Pozzi, Oswestry, circa 1825. With moulded cornice above festoon swag engraved silvered scale signed J. Pozzi, Oswestry above concealed tube and longcase clock form plinth base enclosing the cistern, 93cm high, B.C. Ref. 51. Illustrated in Banfield, Edwin BAROMETERS Stick or Cistern Tube page 109. J. Pozzi is recorded by Banfield as working in Oswestry, Shropshire circa 1815-35.
A fine and rare George II walnut syphon tube wheel barometer John Hallifax, Barnsley, circa 1730. With stepped caddy pediment above moulded cornice and book-matched veneers to trunk centred by a 7.5 inch circular register calibrated in inches and also divided 0-30 corresponding to the decimal divisions of the barometric inches, the foliate engraved brass centre signed John Hallifax Barnsley Inv:t fecit, within ogee moulded bezel above applied recording ring with two blued steel pointers to the rounded base, 114cm high, B.C. Ref. 119. Illustrated in Banfield, Edwin BAROMETERS Wheel or Banjo page 18. John Hallifax is recorded by Banfield as being born in 1694 and dying in 1750. His father was the vicar of Springthorpe, Lincolnshire. It is probable that John Hallifax moved to Barnsley to set up business as a clockmaker, where he became very highly regarded within the locality soon after his fathers death in 1711. Perhaps the best known barometers from Hallifaxs workshop are those that take the form of a longcase clock (see following Lot), however several of the current examples form are known, perhaps the best known being one presently housed at the Victoria & Albert Museum which is illustrated and described in Goodison, Nicholas English BAROMETERS Part II Some Important Makers and Retailers page 158. The current example benefits from having an attractive stepped caddy pediment rather than the simple domed pediment seen on almost all other known examples and the relatively restrained design is enhanced by the use of book-matched veneers on the trunk.
A fine inlaid mahogany longcase clock form syphon tube dial barometer J. Hallifax, Barnsley, circa 1770. With swan neck pediment and turned hood pilasters flanking hinged break-arch glazed door enclosing a 6 inch brass register with matted centre within silvered ring calibrated in inches and also divided 0-30 corresponding to the decimal divisions of the barometric inches, the angles with mask and scroll cast spandrels beneath circular boss signed J. Hallifax BARNSLEY Inv. & fecit flanked by conforming mounts, the trunk with cavetto moulded throat above two floral oval paterae centred inlaid panels divided by circular inset brass recording chapter ring centred by an eight-pointed parquetry star, the plinth base with conforming panel inlay centred by a marquetry rosette, 112cm high, B.C. Ref. 120. Illustrated in Banfield, Edwin BAROMETERS Wheel or Banjo page 20 and described on page 22. John Hallifax is recorded by Banfield as being born in 1694 and dying in 1750. The business was continued by his fifth son, Joseph, who died in 1762, his fourth son, George, had moved to Doncaster by 1750 where he set up business as a clockmaker, twice becoming Mayor. John Hallifax produced many examples of this highly individual form of barometer throughout the first half of the 18th century, almost all surviving examples are veneered in walnut and have stepped caddy pediments to the hood. See Goodison, Nicholas English BAROMETERS Part II Some Important Makers and Retailers pages 157-159. Banfield suggests that this barometer was possibly made by George Hallifax using surplus components after his brother Josephs death in 1762.
A Regency mahogany large mercury wheel barometer with timepiece Matthew Woller, Birmingham, circa 1820. The 12 inch circular silvered register calibrated in inches and signed M. WOLLER Birmingham to the sun and moon engraved centre beneath ivory setting pointer adjustment disc, 4 inch circular white enamel Arabic numeral clock dial and brass edged arched Fahrenheit scale mercury thermometer, with hygrometer to the rounded base, 116cm high, B.C. Ref. 131. Illustrated in Banfield, Edwin BAROMETERS Wheel or Banjo page 53. Matthew Woller is recorded by Banfield as working from 51 Edgbaston Street, Birmingham 1801-28. The clock is a thirty-hour verge coach clock type timepiece movement with fusee and pierced balance bridge to the gilt backplate signed Mattw Woller.
A rare George III mahogany mercury dial barometer Chamberlain, Portsea, circa 1810. With swan neck pediment above 8.25 inch square silvered register calibrated in inches and signed Chamberlain, Portsea to the vitruvian scroll engraved centre above bone setting pointer adjustment disc, hygrometer and arched-top Fahrenheit scale alcohol thermometer to the straight trunk with cavetto moulded underside to base, the case with ebony and box line borders, 108cm high, B.C. Ref. 135. Illustrated in Banfield, Edwin BAROMETERS Wheel or Banjo page 57. Chamberlain is recorded by Banfield as working in Portsea circa 1800-20. Banfield suggests that this form of barometer was designed in the form of, or perhaps to accompany, a longcase clock.
A rare George III mahogany mercury dial barometer Samuel Bregazzi, Derby, circa 1815. With swan neck pediment above 6 inch circular silvered register calibrated in inches signed S. BREGAZZI, Derby and with Fahrenheit scale alcohol thermometer to centre above bone setting pointer adjustment disc to throat and straight trunk, the square base with cavetto moulded underside, 102cm high, B.C. Ref. 136. Illustrated in Banfield, Edwin BAROMETERS Wheel or Banjo page 58 and described on page 55. Samuel Bregazzi is recorded by Banfield as working 1816-circa 1845 from Queen Street, Derby. Banfield suggests that this form of barometer was designed in the form of, or perhaps to accompany, a longcase clock.

-
460315 item(s)/page