There are 66890 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribeFive small boxes, a silver and tortoiseshell circular example, London 1911; two Greek silver coloured pill boxes, each engraved a name; a white alloy navette shape double sided box, inset with Chinese mother of pearl gaming counters; and one formed as a cabin trunk Visit www.dnfa.com for condition reports.
A mahogany cased longcase clock, the hood with swan-neck pediment and arched glazed door flanked by tapering turned columns, the trunk with arched door flanked by plain quadrant columns, and panelled plinth flanked by stop chamfers, raised on turned feet, the 8-day movement having an arched dial painted with figures representing the Continents, with subsidiary seconds and calendar dials, inscribed Thos. Russel, Lancaster, circa 1797-1832, 237cm high.
A Victorian oak and mahogany cased longcase clock, the hood with reverse swan-neck pediment and arched glazed door flanked by lotus carved and rope-twist columns, the trunk with shaped top to the door flanked by conforming split pillars, and crossbanded plinth, the 8-day movement having a painted dial with views of Netby Abbey, subsidiary seconds dial and calendar aperture, signed J. Jarvis (?), Whitchurch, circa 1840, 226cm high.
A Fine Quality 18th Century Mahogany Moonphase Eight Day Longcase Clock. The brass dial having decorative pierced & gilt brass spandrels to the corners, a silvered chapter ring signed Rob Wright, Kennoway and encircling an engraved centre with calendar aperture and subsidiary seconds dial. The arched top housing a painted moon roller. The flame mahogany hood having a swan-neck pediment above scrolling blind fret-work panels and a glazed door flanked by Corinthian stop fluted columns. The sides having a mirrored arches decorated with astrigal beading. The long trunk door with egg finial above the base raised on ogee bracket feet. 86 ins (219 cms) in height.
A 19th Century Mahogany Eight Day Long-case Clock. The 14 inch (35.5 cm) wide painted dial signed C.Roberts Leeds and having subsidiary seconds & calendar dials, decorated with sprigs of plums to the spandrels and a rural scene in the arch depicting a riverside Inn with man on road in the foreground and men boating in the distance. The swan-neck pediment surmounted by a brass globe & eagle finial with spired globe finials either side above the baluster turned side columns. The broad cross-banded trunk inlaid with stringing & decorative bands, housing a short, peaked wave-topped door edged in lip moulding flanked by canted sides. 90½ ins (230 cms) in height.
A Fine Quality Eight Day Walnut Longcase Clock. The brass dial bordered by gilt brass spandrels, with a silvered chapter ring engraved Rich Penny, London, encircling a matted centre housing a subsidiary seconds dial & calendar aperture . The arched top richly engraved with scrolling foliage and centred by a decorative mount of two winged cherubs holding a crown. The hood having an arched top cavetto moulded cornice above two columns with gilt capitals flanking the glazed door. The well figured burr veneered case having a long trunk door with a moulded edge. Standing 86½ ins (220 cms) high, 21¼ ins (51.5 cms) wide, 9¾ ins (25 cms) deep.
A Pair of Royal Doulton Collectors Plates "Anne Boleyn" and "Catherine of Aragon", also a Royal Staffordshire Clarice Cliff style fruit bowl depicting woodman, a Sylvac jug in form of a tree trunk mounted with rabbit motif, and a 19th century lustre bulbous jug having raised multicoloured figure and bird decoration (5)
A 19th Century longcase clock, by Craven Lyon, Bridlington, the eight day movement with arched painted dial having Roman numerals, seconds dial and date aperture, shell painted spandrels and a rustic figure scene with children offering a baby to two ladies to the arch, in mahogany case, the hood with eagle and ball brass finials on swan neck pediment having gadrooned edge on baluster turned columns, the arched trunk door flanked by gadrooned pilaster on moulded panelled base and splayed feet, 96" high
William Flint, Ashford. A mahogany longcase clock, the eight-day duration movement striking the hours on a bell, the 11in. painted arched dial having black Roman numerals, subsidiary seconds and date dials, blued steel decorative hands and signed within the arch with the maker's name 'Wm. Flint, Ashford', the falseplate to the dial embossed with the dial maker's name 'Walker & Hughes, B/ham', the mahogany case having an arched trunk door, plain base with a shaped plinth, Kentish hood cresting, plain hood pillars with brass capitals and surmounted by three ball and spire finials, height 212cm. * William Flint was born in 1787, the son of William Snr, also a clockmaker to whom he was apprenticed and is recorded as working in Ashford, Kent until his death in 1871. * Walker & Hughes were working in Birmingham from 1811 until 1835.
J. Dumvile, Alderley. An oak and mahogany longcase clock, the thirty-hour duration movement striking the hours on a bell with an outside countwheel, the 12in. square brass dial engraved with Roman hour numerals, Arabic minute numerals and diamond markings with rococo style cast brass spandrels to the four corners, the dial centre having dummy winding holes, date aperture, engraved floral decoration and signed with the maker's name 'Jno Dumvile, Alderley', with blued steel hands, the flat topped oak case having mahogany crossbanding, the base having canted corners and a raised, shaped panel, with quartered fluted columns to the trunk and further fluted pillars, with cast brass capitals to the hood, having a decorative gilt and blue painted frieze to the top, height 206cm. * John Dumville is recorded as working at Nether Alderley, Cheshire. He died in 1797.
A late 17th century walnut and floral marquetry month going longcase clock, the twin train movement with recoil escapement striking the hours on a bell, , the 11" brass dial signed to the lower margin 'Joseph Knibb Londini Fecit', with chevron engraved perimeter and cherub mask spandrels around a silvered Roman chapter ring enclosing a matted centre with date aperture, the hood with caddy top, blind fretwork friezes and spire finials above a long trunk door with central armorial of a crown supported by griffins, on a stepped apron with bracket feet, the whole inlaid flower-filled jardinieres and perched birds within line inlaid and trailing vine borders (movement significantly adapted). 236cm high
AN OAK AND MAHOGANY 30 HOUR LONGCASE CLOCK the 28cm (11in) square painted dial with Roman numerals and calendar aperture, the chain driven 4 pillar movement with anchor escapement and outside countwheel, striking on a bell, the case with broken swans neck pediment, turned pillars, long trunk door, plain plinth and bracket feet, 212cms high (with pendulum and weight)
A LACQUERED LONGCASE CLOCK, WILLIAM STAPLETON, London, the 30cm (11.75in) broken arch brass dial with silvered chapter ring, Roman numerals, Arabic five minute intervals, finely matted centre, seconds dial, calendar aperture, pierced gilt brass urn and foliage spandrels, silvered medallion in the arch signed as above, flanked by inverted dolphin spandrels, the 5 pillar movement with anchor escapement, rack striking on a bell, the case with pagoda shaped pediment on turned pilasters, broken arch long trunk door, panelled plinth and bracket feet, the door Chinoiserie decorated with figures and pagodas, 226cms high (plinth reduced, brass cased weights, pendulum, crank key and case key)
A MAHOGANY LONGCASE CLOCK, HENRY JOHN FOY, TAUNTON the 30cm (11.75in) square brass dial signed in the centre as above with Roman numerals, Arabic five minute intervals, seconds dial, calendar aperture and engraved scrolling spandrels, the four pillar movement with anchor escapement rack striking on a bell, the case with moulded pediment, long trunk door and plain plinth, 198cms high (with pendulum, weights and crank winding key)
A part built 3 inch scale model of a 'Savage Little Sampson' live steam traction engine, being a single cylinder steam tractor/agricultural engine. The model is approximately 75% completed with many parts included to complete the build. It comes with a full set of drawings, gears have been cut, most main parts have been assembled. cylinder 1 1/2" bore by 2 1/2" stroke, linkages to be completed,trunk guide, steering fitted but drive chains not fitted, open crank and eccentrics, spoked flywheel, water pump fitted but not eccentric drive, chimney, straked wheels, brake gear not fitted. Castings and parts are still available commercially for this model. Boiler: The traction engine is fitted with an unused 'Franklin & Bell' steel boiler Number.FB473. Hydraulic tested to 250psi on the 7th of December2001. Working pressure 125 psi. Certificate of Conformity dated the 4th of December 2001.
A George III mahogany and satinwood inlaid longcase clock, the hood having a swan neck pediment and blind fret carved decoration between turned pilasters, housing an arched brass dial with a silvered chapter ring and subsidiary second dial between brass spandrels, signed Norman Macpherson, Edinburgh, the trunk enclosed by an arched door inlaid with an urn on a stepped plinth base
An early 19th century mahogany 8-day longcase clock, maker Alexander Crawford of Scarborough, the arched painted dial with Roman and Arabic numerals, subsidiary seconds and date dials, floral spandrels, the hood with swan neck pediment, the trunk with arched door and pedestal base on bracket feet, 218cm high
Loading...
