There are 19703 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribeAn early freelance model of a road roller, built by Mr J E Davies of Swindon and having worm steering, driver s seat, fuel tank and small air cooled I/C engine, tool box and canopy. The model comes with a water bowser on spoked wheels with wooden block brakes, hand operated water pump and spring mounted hitch. Roller measurements: Length 30cm. Width 16cm. Height 20cm.
A fine exhibition quality 1 inch scale model of a Burrell Gold Medal showman road tractor Lady Ruby , built by Mr K.W.Williams of Doncaster and being a two speed showman tractor of compound design with a copper boiler, the fittings including a water gauge, pressure gauge, safety valve, blower, clack and blowdown valves, drain cocks, copper pipework, ratchet mechanical lubricator, crosshead guides, Stephenson's link reverse, eccentric driven feed pump and bypass, solid flywheel with wooden block brake and belt drive to electric generator, the chassis details including spoked wheels with fitted rubber road tyres, worm and roller chain steering, damper, cable drum with fairleads, hand brake to back wheels, fitted belly tanks, lifting hose and brass olivers supported sign written canopy with extension chimney, The model finished in red and black lined paintwork with polished brightwork. Length 52cm. Height 34cm. No boiler history available. * Awards: The National Model Engineering and Modelling Exhibition 2000 1st Certificate. The Centenary Model Engineering Exhibition 1907 -2007. Engineering Section A4 Silver Medal. Please Note: The silver medal is being sold with the model.
An approximate 1 inch scale model of a steam road roller, built by the late Mr Ivor Dolling of Chesham, for display purposes only with boiler having mock water sight glass, pressure gauge, regulator, direction control and hand operated brake. The single cylinder with cross-head guides, safety valve, worm and chain steering, winch, fairleads and miniature bucket. The model finished in green and black paintwork with fitted polished brass boiler bands and canopy. Sign written Chesham Urban District Council . Length 59cm. Width 21cm. Height to top of canopy 29cm. The roller comes together with a glazed pine display case.
A well-engineered 1 ½ inch scale model of a 'Royal Chester' Allchin Traction engine, built by the late Mr Ivor Dolling of Chesham with single cylinder, being a two speed general purpose engine. The engine has a copper boiler with fittings including water gauge, pressure gauge, safety valve, blower, clack and blowdown valves. Engine details include cylinder approximately 1 inch bore x 1 ½ inch stroke, drain cocks with operating lever, ratchet mechanical lubricator, trunk type crosshead guide, Stephenson's link reverse, eccentric driven feed pump and bypass, two road speeds and spoked flywheel. Pickering type governor, chassis details include spoked straked wheels, worm and roller chain steering, spud pan, damper, cable drum, fairleads, water lifter, hand brake to second shaft, wooden footboard and tool box. The model is finished in red and black paintwork with polished steel brightwork and comes together with a set of miniature hand tools, funnel, axle jack and road lamps. Length 66cm. Width 30cm. Height to top of chimney 44cm. No boiler History available.
A fine exhibition quality 1 ½ inch scale model of an Allchin Agricultural Traction engine 'Royal Chester', with two road speeds, single cylinder general purpose engine. The engine has a silver soldered copper boiler with fittings including water gauge, pressure gauge, safety valve, blower, clack and blowdown valves. Polished brass boiler bands. Engine details include cylinder approximately 1 inch bore x 1 ½ inch stroke, drain cocks, mechanical lubricator, trunk type crosshead guide, Stephenson's link reverse, eccentric driven feed pump and bypass, two road speeds and spoked flywheel having lined finish. Pickering type governor with belt drive from crank, chassis details include spoked straked wheels with polished brass hub caps, worm and roller chain steering, spud pan, damper, cable drum, fairleads, water lifter, hand brake to second shaft, wooden footboard and tool box. The model is finished in red and black paintwork with fitted road lamps. Width 16 ½ inches x length 26 inches (42cm x 66cm).
An exhibition standard and award winning 2 inch scale model of a Fowler live steam Showmans engine 'Princess', built by the award winning late Mr Alec Hadfield of Sidmouth from Plastow castings and drawings, The copper boiler with fittings including sight glass, pressure gauge, safety valve, blower, clack and blowdown valves. Cylinder bores 1 â…œin and 2in with 2inch stroke, solid flywheel, drain cocks with associated pipework, Stephenson's link reverse, eccentric driven feed pump and bypass, two road speeds. Pickering type governor, whistle. Chassis detail include spoked straked wheels with rubber tyres fitted, worm and roller chain steering, cable drum with fairleads, hand brake, water lifter, belly tanks. The model finished in red, black and yellow paintwork with brass mounts and brass olivers supporting canopy sign written Alec Hadfield - Engineering- Sidmouth. Devon. Length 108cm. Width 39cm. Boiler History: Past boiler history. Southern Federation of Model Engineering Societies Boiler Certificate No. 1780. Expired 3rd of February 2002. Hydraulic pressure 150 psi. Working steam pressure 100 psi. Quantity of past boiler certificates. -360 PLEASE NOTE: All boiler history records and references made in this catalogue are made for guidance only and the auctioneers are not able to convey any guarantee s or warrantee s as to the safety of the boilers or their present condition. * The late Alec Hadfiled is regarded by the Taunton Model Engineering club as one of their finest members, winning almost every award the club ever presented and supporting the club for many years.
A finely engineered 3 inch scale model of an Allchin Agricultural Traction Engine Royal Chester , built by the late Mr Patrick Avery of Ashbourne, Derbyshire being a scaled up version of the famous W.J.Hughes 1 ½ inch scale model. It is a single cylinder, two speed general purpose agricultural engine. The engine has a copper silver soldered boiler with fittings including protection cased water sight-glass, steam pressure gauge, safety valve, blower, clack and blowdown valves. Engine details include single cylinder approximately 2in bore x 3in stroke, lever operated drain cocks and associated pipework, ratchet mechanical lubricator, trunk type crosshead guide, Stephenson's link reverse with graduated lever control, eccentric driven feed pump and bypass, two road speeds and spoked flywheel, chassis details include spoked straked wheels, worm and roller chain steering, spud pan, damper, cable drum, fairleads and hand brake to second shaft. The model is finished in red and black lined paintwork with polished brass boiler bands and hub caps. Length 127cm. Width 55cm. Height to top off chimney 87cm. Comes together with drawings for boiler but no boiler history was available.
A Worcester L'Amour pattern coffee cup, ribbed handle, after an engraving by Robert Hancock, with a courting couple, her maid standing behind and a gardener with roller, the verso with Garden Statuary pattern, the interior with black line, c.1758-65Vendor's Note : This is a rarer variation of the normal the fountain is missing to the left and a gardener is rolling the lawn to the right. The little dog still in front. Condition Report: Speckles to base, some to body. Manufacturing blemish.
A Worcester L'Amour pattern tea bowl and saucer, after an engraving by Robert Hancock, with a courting couple, her maid standing behind, the verso with Neptune fountain and roller, a swan to the interior, 12.2cm diam, c.1764Provenance: The Sir Jeremy Lever Collection, Part II, Bonhams; The McWilliams Collection Condition - Light wear. Two minor firing stresses to each piece. Condition Report: Light wear. Two minor firing stresses to each piece.
Pens: a Mont Blanc Special Anniversary Edition boxed set comprising, Meisterstuck fountain pen with 14k nib, black, a matching roller pen and two glass inkwells, with service guide bookletPlease note: we are advised that the pens do not go with the box, as they are not engraved to the clip band, have no diamond inset and have the incorrect nib. Both however are Mont Blanc pens.
R&B/BLUES US 78s - Hot collection of 11 x scorchin' original US 78s! Artists/titles are Billy 'The Kid' Emerson - Little Fine Healthy Thing (Sun 233 - V), Lonnie Lyons - Flychick Bounce c/w Far Away Blues (Freedom Recording 1507 - V), Joe Turner - TV Mama (with Elmore James here! Atlantic 1016 - nice E), Lavern Baker - Jim Dandy Got Married (Atlantic 1136 - V), Blues Rockers - Johnny Mae c/w Calling All Cows (Excello 2062 - E), Lonesome Sundown - You Know I Love You (Excello 2154 - E), Little Walter - Roller Coaster (Checker 817 - V+), Clarence 'Gatermouth' Brown - Boogie Rambler (Peacock 1505 - V+), Slim Gaillard Orchestra (Bell-Tone BT-753), Leo Parker's All Stars (Savoy 929) and The Johnny Otis Show (Capitol CL 14817).
An incredibly rare original 1980's ex- Kenner factory prototype / proof card for The Real Ghostbusters ' Fright Features ' range of action figures. This card being for Winston Zeddmore ' and Scream Roller Ghost '. Mint+, unpunched. Proof cards were used to view the final artwork design prior to full production of the card backs. Very rare. Note: Consigned from an ex-Kenner employee. Each card back remains in superb mint+ original condition, completely unused and unpunched.
A quantity of Bakelite to include; a cream and black vintage Thermos 1950's ice bucket with strainer, model no. 931, a boxed magnet electric torch, a Stadium electric torch, a desk caddy with six compartments, patent no. 797155, a Velos roller reference pad and a perpetual with notepad holder (6)
A 10-BORE FLINTLOCK SPORTING GUN BY MANTON, 44.25inch sighted browned multi-stage damascus barrel ring turned at the mid point and finely inlaid and decorated with gold stands of arms and swags, and banding at the muzzle, further inlaid in gold Manton London in scrolling Gothic script, gold lined breech, pan and touch hole, border engraved stepped lock signed MANTON and fitted with a roller frizzen, half stocked with horn fore-end cap and chequered wrist, steel mounts, the trigger guard engraved with a stand of arms and the serial no. 1653 for 1792, brass capped wooden ramrod. Of note is that serial no. 1658 is listed in The Mantons: Gunmaker's by W.Keith Neal and D.H.L. Back as being an Unmounted Single 10-Bore Barrel of 45inches, of further note is the reference to "the words on the barrel and the touch-hole are in gold, and the barrel is decorated in gold at both breech and muzzle" It is surmised that the barrel and lock were sold for mounting in India where it appears this gun was stocked.
Loading...
