We found 31159 price guide item(s) matching your search

Wells Brimtoy (UK) No.146 Dennis tinplate fire engine, scarce example finished in red, yellow plastic escape ladder and brown plastic spoked escape wheels, friction drive, with ringing bell (VG)

An 18th Century style medium oak drawer leaf refectory table and eight chairs, 20th CenturyThe table with a simulated plank and cleated top above two draw leaves, raised on ring turned tapering legs with plain cross stretchers, along with a set of eight conforming ladder back dining chairs, table 160cm extending to 220x79x84cm.

Four 18th/19th Century elm rush seat country chairsEach with a rail back above three turned spindles over an envelope rush seat raised upon ring incised tapering front legs with pad feet and turned front cross stretchers, along with a ladder back rush seat chair and a simulated bamboo rush seat chair, 93cm approximately.

A set of six 18th Century style ladder back kitchen chairs, 20th CenturyEach chair with a five rung back above an envelope rush seat raised on turned front legs with pad feet, ring turned baluster front cross stretcher and plain rear legs of square section, 100cm high.

A 19th Century beechwood ladder back rocking chairThe rail back with two rows of three turned spindles above an envelope rush seat, flanked by outswept arms,raised upon cylindrical front legs with a baluster ring turned front cross stretcher and mounted on rockers along with a rattan seated stool and a beech rattan seat elbow chair. (3) rocking chair 103cm high.

An unusual late 19th Century child's oak rocking chairThe top rail with a central circular inlaid panel depicting a young girl with her toy dog, above outswept arms over an envelope rush seat, supported on ring turned front legs and mounted on rockers along with a 19th Century stained beech wood ladder back rocking chair with an envelope rush seat and ring incised front legs, heights 71cm and 97cm.

Oak Ladder Back Chair, Mahogany Stool and another Stool with Bergere Seat

Oriental Bamboo Ladder, approx. 340cms high

Dinky Toys - a good lot of unboxed early models to include a Trojan van, 'Brooke Bond Tea' (excellent), a further red Trojan van (playworn), Petrol Tanker 'Castrol' (playworn), Studebaker # 172 (playworn), red Delivery van # 280, Johillco Fire Engine, (lacking driver figure, fireman, bell and ladder) and a later model - [7]

A good dark oak refectory-style dining table together with a set of six matching ladder back and green leather upholstered chairs (2 + 4)

BIN, LADDER, IRONING BOARD

Three rush seated ladder back chairs and a plank seated ladder back chair (4).

An Ercol draw leaf refectory type dining table and six ladder back chairs with padded seats and turned front legs, length of table when not extended 137cm.

A 19th century ladder back rush seated elbow chair, a pair of Victorian balloon back ebonised, mother of pearl inlaid bedroom chairs with embroidered seats above turned splayed front supports and a later painted example (4).

A cream painted console table with pine top above three short drawers, height 80cm, three similarly painted stools and a ladder back rush seated chair (5).

An early 19th century mahogany dining table raised on ring turned supports to brass caps and castors, formerly an extending table but now with fixed top, length 113.5cm and four wavy ladder back chairs (5).

A late 19th/early 20th century ebonised ladder back chair with canvas upholstery on turned front supports and stretcher, height 102cm. CONDITION REPORT: Wear to ebonised finish throughout, upholstery is stained, faded and worn with recently applied MDF supporting board beneath the seat, also evidence of recent repainting/varnishing.

A large oak plank top refectory table with cleated ends, ring turned and block supports and central stretcher, 320 x 110cm with a set of twelve wavy ladder back oak dining chairs with padded stuffover seats and turned front legs to pad feet, bearing plaque under the table 'Arighi Bianchi Macclesfield, by the royal oak' (13).

A 19th century country ladder back chair with rush seat on ring turned front legs to pad feet, a further spindle back elbow chair and another ladder back chair, both with rush seats (3).

A modern cream pained rectangular table with wrought iron and glazed top, on fluted baluster legs, 129 x 85cm, and a set of six rush seated ladder back chairs (7).

Distressed grey painted finish ladder back open arm elbow chair, standing on pad supports united by stretchers Condition:

A set of six G Plan teak wood ladder back dining chairs, raised on tapering legs united by stretchers with stuffed brown velour fabric seat pads 

A London Armoury Company Volunteer Pattern Three Band .577 Calibre Snider Rifle by James Kerr & Co., 54 King William Street, London, the 75.5cm steel barrel stamped L.A.C. with London proof marks to the left side at the breech, with hinged ladder rear sight, the top of the receiver stamped 3 and with SNIDER PATENT, the lock plate faintly stamped with crown/VR and maker's name, the walnut full stock with steel barrel bands, brass trigger guard later engraved with Devanagari lettering, with brass butt plate and steel cleaning rod, lacks sling swivelsAction works, holds at full and half cock. Pitting to metalwork is quite deep. Bore is pitted. Bruising to stock

A Triplett & Scott Repeating Carbine by the Meriden Manufacturing Co., .50 calibre rimfire, the 56cm round steel barrel with hinged ladder rear sight, the whole released with a button and revolving to the right for loading, the left side of the breech stamped KENTUCKY, the left side of the receiver stamped MERIDEN MNFG.CO., MERIDEN, CONN., over the tubular magazine which extends into the stock, the back strap stamped TRIPLETT & SCOTT PATENT DEC.6 1864, the walnut fore-end with barrel band, the walnut stock with steel sling swivel, one missing from the heel, with curved butt plate

A Victorian Tower 1853 Pattern Three Band Percussion Rifle-Musket, the 99cm steel barrel with hinged ladder rear sight, various inspectors stamps and Sold Out of Service arrows, the lock plate faintly stamped with crowned VR cypher, 1857 TOWER and small crowned arrow, the full walnut stock with three steel sprung lock barrel bands, brass fore-end tip, trigger guard and butt plate, the left side of the breech stamped THOMAS, the right side of the butt stamped 2 with PIMLICO 1866 roundel enclosing Sold Out of Service arrows, with steel sling swivels, leather sling and steel ramrodStrong action works, holds at full and half cock. Orange rust pitting to metalwork, and deeper pitting to the lock plate. Bruising to the stock.

A US Civil War Smith Patent .50 Calibre Percussion Breach Loading Carbine, the 55cm round barrel octagonal at the breech, with hinged ladder rear sight, the left side of the breech stamped MANUFACTURED BY MASS.ARMS CO., CHICOPEE FALLS and ADDRESS POULTNEY & TRIMBLE, BALTIMORE, USA, SMITH'S PATENT, JUNE 23 1857, with saddle bar and ring, walnut half stock with iron butt plateAction works. Metalwork and bore pitted. Some replacement screws. Bruising and scratching to stock

A Calisher & Terry 30 Bore Breech Loading Percussion Carbine, the 54.5cm blued steel barrel stamped TERRY'S PATENT 30 BORE, with hinged ladder rear sight, the lock plate with traces of crown cypher and stamped CALISHER & TERRY 1869, walnut full stock with case hardened steel fore-end tip and barrel band with sling swivel, blued trigger guard and butt plate with hinged cap box, with steel ramrod (Metalwork reblued and refinished)

A Gwyn & Campbell .52 Calibre Type 1 ''Grapevine'' Falling Block Carbine, numbered 4320, the 50.5cm round steel barrel octagonal at the breech, surmounted by a hinged ladder rear sight, the right side of the receiver stamped UNION RIFLE, the lock plate stamped GWYN & CAMPBELL PATENT 1862 HAMILTON O., with sling ring and bar to left side, combination double scroll trigger guard/loading lever, walnut stock with curved steel butt plate

A 19th Century .450 Percussion Breech-Loading Monkey Tail Carbine with Whitworth Rifling by John Reeves & Co., numbered 1047, the 60cm browned steel barrel with hinged ladder rear sight, stamped WHITWORTH RIFLING, the monkey tail stamped MANUFACTURED BY JOHN REEVES & CO, the right side of the breech block stamped J.R.& CO. within an elliptical panel TRADE MARK, walnut full stock with semi pistol grip, single barrel band, steel sling swivels, with steel ramrod, the steel butt plate with hinged patch box

A Sharp's New Model 1863 .52 Calibre Breech Loading Percussion Carbine, numbered 63541, the 56cm blued steel barrel faintly stamped NEW MODEL behind the hinged ladder rear sight, the right side of the receiver stamped C.SHARP'S PAT. OCT.5TH 1852, the upper section stamped R.S.LAWRENCE' PAT. APRIL 12TH 1859, the left side stamped SHARP'S PAT. SEPT. 12TH 1848, with combination trigger guard/loading lever, walnut fore-end and stock with iron barrel band, saddle bar and ring and butt plate

An early to mid 20th century pair of rush seated ladder back chairs, a conforming carver (3)

An oak dining table, fitted frieze drawer, on square supports, 64" x 35", three similar ladder back dining chairs and a similar bench

GPO Slingsby ladder

Six rush-seated oak ladder back dining chairs (5+1) with bobbin stretchers

Seven Corgi Classics diecast model fire engines American La France Aerial Ladder Truck 97324, AEC Pump Escape Fire Engine 97356, AEC Ladder Fire Vehicle 97385, AEC Pumper 97357, AEC Ladder Bristol 97386, AEC Ladder Staffordshire 97352 and American La France Carnegie 97323, some limited edition, all in original boxes

Four Corgi Classics limited edition diecast model fire engines and fire engine sets, American La France Aerial Ladder Truck 97321, Nottingham AEC Pump Escape Fire Engine 97355, La France Scottdale & South River Fire Vehicles 97331 and Cardiff AEC Ladder Fire Vehicle 97385, all in original boxes

FLAT PACK 4 STEP LADDER WITH HANDLE

A SET OF 6 LADDER BACK CHAIRS

SINGLE WOOD LADDER

2 boxed Corgi Fire engines. Boston E-One Rescue and E-One 75ft ladder Bartlett, Illinois

An orange metal and wooden step ladder.

Set of five oak ladder backed dining chairs with drop-in seats and bobbin turned legs, four single chairs and an elbow chair. (5)(B.P. 24% incl. VAT)

19th Century fruit wood ball and rail backed rocking armchair with rush seat, together with a 19th Century stained ash ladder backed armchair with rush seat. (2)(B.P. 24% incl. VAT)

A set of 4 French ladder back and cane seated dining chairs.

A set of 8 reproduction oak ladder back dining chairs,with rush seats and turned legs, (6+2).

A painted octagonal tea table and a Vintage painted pine ladder.

Furniture, to include a drop end sofa, a set of four chairs a wire rack, ladder, blue painted cabinet and table

A set of six mahogany dining chairs in George III style, including two armchairs, together with two ladder back dining chairs

A set of eight elm and ladder back dining chairs each with rush seat, 20th century

An Edwardian mahogany and fan inlaid wine table, 27.5cm diameter, a similar period mahogany cake stand and a pair of rush seated ladder back chairs (4).

A Vintage Four Step Library Ladder, 115cm Long

A Set of Four Framed Oak Seated Ladder Back Dining Chairs

An Aluminium Step Ladder

Early 20th century oak open arm chair, ladder back and rush seat on turned support, together with oak hanging coat rack, with central circular mirror, L.104cm

A set of four white painted ladder back bar stools with rush seats

A rush seated and ladder back elbow chair; and one other rush seated chair

Four rush seated ladder back chairs

LADDER BACK SIDE CHAIRS, a pair, George III mahogany circa 1770 with stuff over seats, each 57cm x 50cm x 97cm H. (2)

A Lego point of sale shop display advertising cabinet for the City series. Featuring sets 60107, 60118, 60116 and 60128. Fully made and assembled for display. The cabinet with lights (require batteries) and rotating fire engine ladder. Measures approx; 39cm x 59cm x 38cm. 

A Georgian oak drop leaf table, oval surface, kick legs, turned supports and stretchers, 115 by 46.5 (142cm extended) by 70cm high, together with four 19th century oak country ladder back dining chairs, with rush seats and turned supports, each 49.5 by 43 by 96cm high. (5)