We found 31159 price guide item(s) matching your search
There are 31159 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
31159 item(s)/page
A Swedish M1870 Rolling Block Carbine, obsolete 12mm calibre, the 46cm barrel with hinged ladder rear sight, stamped E.S. T.N. over a crowned C. the left side stamped 2361, the right side of the receiver stamped with crowned C 1877, the left side stamped J.P. W.N. 2361, with saddle bar, with walnut full stock, the muzzle band stamped 2361, 86cm. Action works. Fine brown pitting to metal. Stock has two vacant holes below muzzle band and a square patch to the left side of the butt.
A Mauser Model 1871 Bolt Action Carbine, 11mm, the 51cm round barrel octagonal at the breech and stamped OESTERR.WAFFFB.GES., numbered 7157B, with hinged ladder rear sight, the left side of the receiver stamped K.Mod.71, the right side 1876 1877, with numerous proof marks, walnut half stock with tapered fore-end, 99cm. Action works. Grey patching to metalwork. Rifling quite crisp, but flaws towards the muzzle. Bruising to stock, with a patch to the underside of the butt.
A Mauser Model '71/'84 Bolt Action Rifle, 11mm, the 82cm blued round barrel octagonal at the breech and stamped with crown over SPANDAU, numbered 8451, with hinged ladder rear sight, straight-handled bolt, the left side of the receiver stamped J.G.Mod.71/84, the right side 1887, with numerous proof marks, walnut full stock with three blued barrel bands, concealed magazine tube within the fore-end and stacking spigot at tip, with sling swivels, 129cm. Action works. Minor bruising to stock, otherwise in good clean condition
A Remington Rolling Block Military Rifle, with reblued finish, the 92cm round barrel with hinged ladder rear sight, teh left side stamped R at the breech, the upper tang marked E.REMINGTON & SONS. ILION. N.Y. U.S.A./PAT. MAY 3D 1864 MAY 7TH JUNE 11TH NOV. 12TH DEC. 24TH 1872/DEC. 31ST 1872 SEPT. 9TH 1873 JAN. 12TH MARCH 18TH 1874, the walnut full stock with three barrel bands, two sling swivels and crescent shape butt plate, with steel cleaning rod, 131cm. Action works. Rifling crisp. Re-blued. Stock refinished. Wear to bluing of frame.
A Victorian Percussion Three Band Rifle by the London Armoury Company, the 97cm round barrel with hinged ladder rear sight, stamped L.A.C. and with inspector's marks, the lock plate with crowned V, crowned arrow, 1860/L.A.Co., the walnut full stock with chequered grip and fore-end, with brass fore-end tip, trigger guard and butt plate, steel sling swivels, lacks ramrod, 140cm. Action works, holds at full and half stock. Grey/brown pitting to metalwork. Rifling worn. Bruising to stock. Ramrod missing
A Victorian Snider-Enfield Mk.II * Three Band Rifle Musket, .577 calibre, the 93cm round barrel with hinged ladder rear sight, various proof marks and War Department markings, the front of the breech block stamped II/*, the lock plate with crowned VR, 1862/ENFIELD and crowned arrow, the walnut full stock with brass fore-end tip, trigger guard and butt plate, the right side of the butt with rounded stamped R crown M ENFIELD, the left side stamped DC within a diamond/300/297, with steel sling swivels and cleaning rod, 138cm. Action works, holds at full and half cock. Grey/brown patching to metalwork. Bruising to stock and brass furniture. Pitting to cleaning rod. Wear to rifling
A Victorian Snider-Enfield Mk.II ** Three Band Rifle Musket, .577 calibre, the 93cm round barrel with hinged ladder rear sight, various proof marks and War Department markings, the left side later scratched 019-18-0690, the front of the breech block stamped II/*/*, the lock plate with crowned VR, crowned arrow/1867/ENFIELD, the walnut full stock with brass fore-end tip, trigger guard and butt plate, the right side of the butt with rounded stamped R crown M ENFIELD/1, with steel sling swivels and cleaning rod, 139cm. Action works, holds at full and half cock. Some wear to rifling. Brown patching to metalwork. Left side of barrel later scratched 019-18-0690. Bruising to stock with two chips to the fore-end along the ramrod channel.
A Victorian Snider-Enfield Mk.III Two Band Rifle Musket, .577 calibre, the 78cm round barrel with hinged ladder rear sight and bayonet lug to right of muzzle, various proof marks and War Department markings, the front of the breech block stamped III, with chained snapcap, the lock plate with crowned VR, crowned arrow/ 1871/ ENFIELD, SR,7, and crowned arrow, the walnut full stock with steel furniture, the right side of the butt with rounded stamped R crown M ENFIELD/1 and Sold Out of Service arrows, the left side stamped DC within a diamond, the top stamped 37/139, with steel sling swivels, cleaning rod and buff leather sling, 124cm. Action works, holds at full and half cock. Rifling crisp except for orange rust pitting at muzzle end. Grey/brown patina to barrel with some patching to other metal fittings. Bruising and small chips to stock.
A Victorian Martini-Henry Mk.II .450 Service Rifle, the 84.5cm round barrel with hinged ladder rear sight and various proof marks, the right side of the receiver with crowned V.R./ENFIELD/1878/crowned arrow/II, the walnut full stock with two barrel bands, teh right side of the butt stamped with roundel of R crown M ENFIELD enclosing WD arrow/II/1, with steel sling swivels and cleaning rod, 124cm. Action works. Rifling quite deep, but with pitting. Grey patching and pitting to metalwork. Bruising and scratching to stock
A Victorian Martini-Henry .450 Service Rifle, the 85cm round blued barrel with hinged ladder rear sight, stamped BPE 1536, with Birmingham proof marks and 52, the walnut two band full stock with steel bayonet lug, butt plate, two sling swivels and cleaning rod, 127cm. Action works. Rifling crisp. Some wear to bluing. Bruises to stock, with chips behind the frame, a split to the left fore-end and butt.
A Victorian Martini-Henry .450 Service Rifle, the 85cm round blued barrel with hinged ladder rear sight, stamped 588 to the right side, the left side with Birmingham proof marks, 52 and 1184, the left side of the action with Martini's commercial patent mark, the walnut two band full stock with steel bayonet lug, butt plate, two sling swivels and cleaning rod, 127cm. Action works. Crisp rifling. Minor pitting to barrel surface, but bluing is good. Some wear to bluing of receiver. Minor bruising to stock.
A Victorian 1853 Pattern .577 Calibre Percussion Rifle Musket, the 99cm rifled barrel with hinged ladder rear sight, various inspector's marks and Sold Out of Service arrows, the lock plate with crowned VR, crowned arrow and 1856, walnut full stock with three barrel bands with sprung catches, brass trigger guard and butt plate marked LC/K/41, with steel sling swivels and ramrod, 140cm. Action works, holds at full and half cock. Deep pitting to barrel particularly at the breech and the nipple lug. Bruising to stock.
A Victorian Snider-Enfield Mark II ** Three Band Rifle to the 1st Battalion, 24th Regiment, .577 calibre, the 93cm barrel with hinged ladder rear sight and various inspector's marks, the front of the breech block marked **/II, the lock plate with crowned VR, 1860/ENFIELD, arrow, crowned arrow, the walnut full stock with brass fore-end tip, trigger guard and butt plate, the tail engraved 1B/24/271, the left side of the butt with Sold Out of Service arrows, the right side with faint ENFIELD roundel, all metal parts with inspector's marks, with steel cleaning rod, sling swivels and buff sling, 137cm **The 24th Regiment of Foot used these rifles in South Africa in the 1870's. Action works. Black/brown patching to metalwork. Some pitting to bore. Bruising to stock.
A Martini-Henry .577/450 Cavalry Carbine by the Braendlin Armoury, the 55.5cm round barrel marked on the left side FOR .577/450 CASE, 52 between Birmingham proof marks and crowned E, the right side marked HENRY'S PATENT B 8118, with hinged ladder rear sight, the right side of the action with Martini's commercial patent mark, the left side with Braendlin mark of crossed lances over 11212, MARTINI'S PATENT, set with saddle ring and bar, the walnut stock with tapering and rounded fore-end, the right side of the butt stamped 0365, 95.5cm . Action works. Some dirt/pitting to the crisp rifling. Some wear to the browned metalwork, with small scratches/bruises to the sides of the barrel. Some bruising to the stock.
A Late 19th Century Nepalese Martini Action Rifle, .450/577, the 84.5cm with hinged ladder rear sight, with plain receiver, the under-lever and tang of the receiver inscribed in Nepalese script, the wood full stock with similar inscriptions (said to have belonged to Chandra Rana, Prime Minister of Nepal in the 1930's); a Turkish Flintlock Carbine, the wood full stock with brass barrel bands and studded decoration; an Afghan Matchlock Rampart Gun, the wood full stock painted red (3-af)
A set of eight Regency ebonised dining chairs by John Gee, each with a pierced ladder back inset with a gilt rosette, above a cane seat, on sabre legs, the rails stamped with various initials, including 'JG', 'FF', 'A', 'D', comprising: a pair of open armchairs and six side chairs. (8)click here to view the page turning catalogue
A 20th Century oak refectory table, the three plank top on shaped and fretted end supports with trestle feet and plain stretcher, 73ins x 33ins x 30.5ins high, a pair of oak rush seated armchairs, the plain backs with shaped crestings, on turned uprights with bun finials, shaped arms on turned and part reeded front legs and stretchers, and four oak ladder back rush seated dining chairs in the "Lancashire" manner, on turned front legs and stretchers
Mats Jonasson (b. 1945) crystal glass sculpture of Father Christmas, signed and inscribed 'Merry Christmas to Manfred 1981/Mats', 20 cm high. Together with two colourless glass Christmas tree decorations; and a hexagonal colourless glass paperweight, reverse relief decoration of boy with ladder (4)
Tipp & Company-Tippco (German) Scarce Tinplate Fire Engine, red body, tin printing, yellow extending ladder, four seated fireman, Dunlop cord balloon tyres, bell, lamp to front, in very good condition, working clockwork motor (repair to clockwork motor housing on base) Approx. 25cms (9 ½ inches) long, complete with original lidded box, in fair to good condition, with label to lid.

-
31159 item(s)/page