A LARGE DAMASCUS 'LOBED ROUNDEL' TILE, OTTOMAN SYRIA, LATE 16TH CENTURY underglaze painted fritware, the lobed medallion containing central flower head issuing spiralling tendrils with further flowers and terminating in saz leaves, on cobalt blue ground decorated with floral arabesques, mounted, 31.5 x 31cmProvenance: Property of a European Collector (see lot 8 for further details). Acquired Christopher Gibbs, 26 March 2002.Published: Arthur Millner, 'Damascus Tiles', London 2015, fig.6.68, p.273.This design appears to have been modelled on an Iznik prototype, decorated in sealing wax red and emerald green, as seen in the Topkapi Palace and 'Blue Mosque' in Istanbul. A slight variation in the design here, however, is the way the strapwork around the roundel runs off the tile to link with adjacent tiles. For other versions of this pattern, see lots 79 & 80.
We found 66009 price guide item(s) matching your search
There are 66009 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
66009 item(s)/page
A diamond single stone ring, the emerald-cut diamond claw set between tapered baguette-cut diamond shoulders, white precious metal mounted, principal diamond weight approximately 1.40ct, remaining total diamond weight approximately 0.15ct, ring size ODiamonds are well matched, bright and lively, with estimated VS2 to SI1 clarity and H to I colour, assessed mounted. The principal diamond and one of the outer diamonds have bluish fluorescence under LWUV. Principal diamond dimensions approximately 7.8mm length x 5.5mm width (depth unknown due to setting). The mount and setting have general surface wear, with scuffs and nicks/chips. The shank has been re-sized and has two associated solder joins. Metal standard is untested and the mount is indistinctly stamped '10%'. Width of setting 14.6mm. Height of setting 7.3mm. Gross weight approximately 5.7gm.
An emerald panel brooch, naturalistically modelled as an undulating feather, with textured decoration, highlighted with a line of graduated circular mixed-cut emeralds, 18ct two colour gold mounted, with London import marks for 1963, length 6.4cmEmeralds have slightly variable light to mid hues, most stones containing fracture, fissure and mineral inclusions, some of which are surface-reaching. Emeralds have surface wear, scuffs and nicks/chips and graduate from approximately 2.5mm to 1mm in diameter. The brooch mount has surface wear, scuffs and nicks, with small areas of solder that are presumed to be part of manufacture. The clasp is functioning. Marks have light wear. Gross weight approximately 8.8gm.
A diamond single stone ring, the emerald-cut diamond in four claw setting, between baguette-cut diamond set shoulders, white precious metal mounted, indistinctly stamped 'PLATINUM', principal diamond weight approximately 3.10ct, remaining total diamond weight approximately 0.15ct, ring size MAccompanied by a Diamond Mini Report issued by AnchorCert, stating that the principal diamond has L colour and VS clarity, report no. 20061680, provided April 2023 The principal diamond is bright and lively but drawing a yellowish tint, with estimated L colour and VS1 to VS2 clarity, assessed mounted. Principal diamond dimensions approx. 9.8mm length x 7.2mm x 4.9mm depth. Shoulder set diamonds are well matched, bright and lively, estimated VS2 to SI1 clarity and H to J colour, assessed mounted. The ring mount has general surface wear, scuffs and nicks/chips, with some rubbing to the sides of the setting gallery and to the sides of the shank, and is likely to be mid 20th century in date. Overall width of setting approximately 1.4cm. Height of setting from base to tip of principal stone approximately 6.5mm. Metal standard is untested. Gross weight approximately 4.4gm.
A diamond single stone ring, the emerald-cut diamond in four claw setting, between tapered baguette-cut diamond set shoulders, white precious metal mounted, with sprung inner hoop, dimensions of principal diamond approximately 11.6mm length x 8.5mm width x 5.6mm depth, total weight of tapered baguette-cut diamonds approximately 0.50ct, ring size approximately SAccompanied by a Diamond Certificate issued by HRD, stating that the emerald-cut diamond weighs 5.06ct, with VVS1 clarity, I colour and nil fluorescence, dated 17 January 2006, certificate no. 06000957002. Please note that this report is over 10 years old and may require updating.Accompanied by a Memorandum of Purchase and a Valuation for Insurance issued by McKenna & Co., London, both dated 16 April 2007. Scuffs, scratches and small chips/nicks to the setting and mount, commensurate for use. The tapered baguette-cut diamonds are well matched, bright and lively, with estimated VS1 to VS2 clarity and I to J colour, assessed mounted. Some traces of grease and dirt residue to setting, would benefit from professional cleaning/polishing. Metal standard is untested. Gross weight approximately 6.9gm.
A pair of emerald and diamond cluster ear studs, each oval mixed-cut emerald bordered by round brilliant-cut diamonds, 18ct white gold mounted, maker's mark HM LD, total diamond weight approximately 0.15ct, length 0.55cmLight surface wear throughout, marks are clearly struck. The butterflies are tight fitting. Some scuffs and nicks to emeralds, which also contain surface-reaching fractures, mineral and fissure inclusions. Diamonds are well matched and bright. Gross weight approximately 1.1gm.
An emerald and diamond cluster ring, the rectangular step-cut emerald claw set within a border of round brilliant and baguette-cut diamonds, white precious metal mounted, total diamond weight approximately 0.50ct, ring size NDiamonds are well matched, bright and lively, occasional stones with chips/fractures, estimated VS2 to P1 clarity and H to J colour, assessed mounted. Diamonds range from approximately 0.04ct to 0.05ct each in size. The emerald is heavily included with fractures, fissures and mineral inclusions, some of which are surface-reaching, and has a light to mid-green hue. The emerald has surface wear, scuffs and nicks/small chips, measuring approximately 7.5mm length x 6.9mm width x 3.5mm depth. Surface wear, scuffs and nicks to mount. Worn marks to shank. Length of setting 1.45cm. Metal standard is untested. Gross weight approximately 4.8gm.
A white gold aquamarine and diamond ring,an emerald cut aquamarine claw set to plain collet to the centre, with two graduated baguette diamonds on each side, channel set to stepped collets, to tapered shoulders and a plain shank, tested as approximately 18ct gold, 2.97g. Finger size PBuying this gemstone ring at auction could save up to 0.42 tonnes of CO2e compared to buying new. Condition ReportSome inclusions to the pavilion of the aquamarine, visible to the naked eye.Aquamarine size 9.8 x 7.1mmEvidence of previous sizing.
A Portuguese silver and gold, emerald and diamond brooch pendant,with a circular cabochon emerald rub set to the centre, to a surround of rose cut diamonds in silver collets, with gold split pearl leafy stems and milled wire decoration on each side, and diamond set fleur-de-lys above and below. A silver outer frame with rose cut diamonds, bead set to a scalloped edge. With brooch and pendant fittings. Marked on pin 18K with town mark for Porto, 16.18g, 42mm x58mmCondition ReportTarnish to the frame.Wear and abrasion to the cabochon emerald.Pin a little bent and slightly loose in the roller catch.Wear to the silver collets.Diamonds and split pearls all present.Some rose cut diamonds are chipped and some are unpolished.
Three pairs of 9ct gold earrings,comprising a pair of 9ct gold hollow stud earrings, five alternating plain and machine engraved tubes, to post and single butterfly fitting, 23 x 15mm, common control mark, a pair of 9ct gold ruby and diamond stud earrings, to post and butterfly fittings, 19 x 4mm, common control mark and a pair of 9ct gold emerald and diamond stud earrings, approximately 10 x 10mm, London 1968, 8.27g total (6)Condition ReportMaker's mark ALD, SJ.Settings slightly dirty, would benefit from a gentle clean.Marks/scratches to surfaces.
A 9ct gold emerald and diamond cluster ring,an oval mixed cut emerald to the centre, with a round mixed cut emerald on either side, all bead set to the rhodium plated ring head, to a surround of round brilliant diamonds bead set to the scalloped border, to solid shoulders and a plain shank. Birmingham 1990, 2.07g.Finger size P½Condition ReportChips and abrasions to the emerald.Various scratches and marks to the ring head.The rhodium plating is wearing off to reveal the original yellow gold colour.
An emerald green mead or champagne glass, c.1750-60, the cup bowl moulded with gadroons, raised on a plain stem and conical foot, some nibbling and a small repair to the foot, 11.5cm.Cf. Woolley and Wallis, 16th June 2021, lot 82 for an identical example from the Terence C Woodfield Collection.
An emerald and diamond 9ct gold ring, the three graduated round cut emeralds within a border of diamonds in a cluster design, set within a 9ct gold mount with carved shoulders and plain polished shank, total emerald weight estimated 0.27 carats, stamped 'GJ' Birmingham 1984, ring size P, 1.5gms
An emerald and diamond yellow metal ring, the central oval cut emerald in a surround of round cut diamonds, set within a white metal mount with round cut emerald set shoulders, and plain polished shank, stamped '375' with control marks, total emerald weight estimated 0.36 carats, ring size O, weight 2.2gms (untested)
A diamond and emerald 18ct gold three stone ring, the central rectangular cut emerald with round cut diamond to each side set in white metal and 18ct yellow gold setting, total emerald weight estimated 0.40 carats, total diamond weight estimated 0.20 carats, ring size P, stamped for CG&S, Birmingham 1976, 3gms Condition report: The claws to the emerald are a little low, may need re-tipping at some point in the future.The ring would also benefit from a clean. No split, cracks or repairs visible to the shank. Hallmarks are crisp and clear. General wear seen to the gold where it has been worn and used. Emerald has visible inclusions seen with x10 loupe but is a good green colour. A few nibbles are seen to facet edges and general rubbing seen to the table.
An emerald and diamond necklace, a pear shaped emerald 9 x 6mm, four claw set and surrounded by twenty-eight brilliant cut diamonds extending up into the 2mm gauge satin finish flexible necklace, overall length 45cm, gross weight 22g.Condition report:Please see further images uploaded to our website.Total weight of diamonds approximately 1.40 carats. The necklace tests as white gold, probably 18 carat.
Four gemset necklets and one gemset pendant on white metal chains, to include tanzanite and diamond, Brazilian emerald, rhodolite garnet, and other gemstones, gemstone necklet size ranging from 23mm to 44mm diameter, all in white metal marked 925, on white metal chains marked 925, ranging from 42cm to 44cm, three necklets with CoAs, some boxed.Qty: 5
A tanzanite solitaire ring, the rectangular emerald cut stone four claw set in an all yellow metal mount ring size J, 3.5mm wide flat shank with split shoulders, 375 stamped inside shank, dimensions of stone 11.74 x 8.1 x 5.3mm, gross weight 4.7g.Condition report:There is abrasion to several crown facet edges and damage to the side of the table. The stone is loose in its setting. There is a crack to the base of the shank. Please see additional uploaded images.
An emerald and diamond cluster ring, the rectangular step cut emerald, claw and collet set in yellow metal and surrounded by forty-four old, Swiss and 8 cut diamonds arranged in two tiers of white metal setting testing as silver, yellow metal shank and fleur-de-lys shoulders testing as gold, ring size N, size of cluster 18 x 6.5mm, gross weight 8.6g.Condition report:There is abrasion to the crown facet edges and a scratch to the table on the emerald. All stones are present and secure. There are some fine surface scratches to the shank, consistent with wear. Please see additional uploaded images of the ring.
An emerald and diamond square cluster ring, a 5.8mm square cut emerald, set with four double claws and surrounded by twelve brilliant cut diamonds, in a yellow and white metal mount ring size M, cluster 14.5mm diameter.Condition report:There is abrasion to the crown facet edges, some very small chips and scratches to the crown facets, and some small chips to the girdle. There are some fine surface scratches to the shank, consistent with wear. There is also an indistinct hallmark on the outside of the shank. Please see additional uploaded images.
An emerald and diamond ring, the rectangular step cut emerald 9.5 x 8.2mm, four claw set with five 8 cut diamonds to top and bottom and five baguette cut diamonds to each side, in an all white metal mount ring size N, shank marked 18K. gross weight 6.5g.Condition report:All stones are present and secure. There are some very small chips and scratches to the emerald's crown facets, some abrasion to the facet edges, and some small chips to the girdle. There is also a surface-reaching fracture to one side of the table. One diamond has a small chip to the girdle. There are some fine surface scratches to the shank, consistent with wear, and evidence that the ring has been resized. Please see additional uploaded images.
A cultured pearl ring, the 4.8mm pearl peg set on a yelow metal mount with floral chased shoulders ring size M, 585 stamped inside shank; a three stone emerald ring size K, spaced by five small diamond, one missing, gross weight of lot 5g.Condition report:There is a continental stamp to the outside of the shank on the emerald and diamond ring.
A pale citrine dress ring, the rectangular emerald cut stone, 20x15mm, claw set in an all yellow metal mount ring size adapted to size Q with a coil of base metal around the shank.Condition report:Please see further images uploaded to our site.Stone all good except two very small nibbles next to two claws, and as mentioned in the description the metal coiled around the shank, claw settings all good.
A 9ct white gold and emerald necklace and matching earrings, the emerald flowerhead pendant, with integrated bale stamped 375 and 9k, 15mm diameter, with white gold chain and clasp stamped 375, together with a pair of matching 9ct white gold and emerald earrings, each approx. 8.8mm diameter, each stamped 375, 4.1g gross
An emerald and diamond ring, the square step cut emerald, collet mounted with a surround of single cut diamonds in millegrain border, with a single diamond to each shoulder and plain band, marks worn, tests as approx. 18ct gold, size S, 2.2gLight wear throughout, more so to the lower half of the band. Emerald is a bright grassy green with reasonable clarity. Some surface rising fractures - not stability affecting. Diamonds bright, lively and well matched.
Art Deco emerald and diamond ring with a rectangular step cut emerald measuring 3.7mm x 2.5mm flanked by six single cut diamonds and two baguette cut diamonds to the shoulders on 18ct white gold shank. Ring size P.Good condition commensurate with age. Lively bright stones of good colour and clarity. Estimated total diamond weight approximately 0.20cts. Not hallmarked but the shank is stamped 18ct. The cluster measures approximately 9mm x 6.8mm. Weight approximately 2.7 grams.
-
66009 item(s)/page