We found 7979 price guide item(s) matching your search

Refine your search

Year

Filter by Price Range
  • List
  • Grid
  • 7979 item(s)
    /page

Lot 511

An autojumblers lotincluding some Rudge parts (crankcases numbered ?2003 - the first letter is indistinct), assorted engine, gearbox, and clutch components; clutch parts, toolbox, sprung pillion seat, Smiths 80mph speedometer with drive gearbox and cable, and sundry items, condition and completeness unknown, close inspection advised. (Qty)This lot is subject to the following lot symbols: ◊◊ £25 + VAT uplift and storage at £5 + VAT per lot per dayFor further information on this lot please visit Bonhams.com

Lot 57

1958 Royal Enfield 248cc CrusaderRegistration no. USY 778Frame no. 10794Engine no. 2387 and S 4909Introduced in 1956, the all-new Crusader 250 was unusual in having a unitary construction engine at a time when most British machines still employed a separate gearbox, and in placing the camshaft drive outboard of the primary chain on the engine's left-hand side. The gears were housed in their own compartment at the rear of the streamlined crankcase casting, which also contained the engine oil tank in typical Enfield fashion. The cycle parts consisted of an open-type swinging-arm frame, telescopic front fork and 17' wheels at front and rear. Over the next decade numerous variations were produced on the Crusader theme, culminating in the Continental GT of 1964. Owned by the collection since March 2006, this Crusader is offered with a V5C Registration Certificate.Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 58

1963 Royal Enfield 248cc CrusaderRegistration no. 462 GAX (see text)Frame no. 16350Engine no. 12870Introduced in 1956, the all-new Crusader 250 was unusual in having a unitary construction engine at a time when most British machines still employed a separate gearbox, and in placing the camshaft drive outboard of the primary chain on the engine's left-hand side. The gears were housed in their own compartment at the rear of the streamlined crankcase casting, which also contained the engine oil tank in typical Enfield fashion. The cycle parts consisted of an open-type swinging-arm frame, telescopic front fork and 17' wheels at front and rear. Over the next decade numerous variations were produced on the Crusader theme, culminating in the Continental GT of 1964. There is no V5C Registration Certificate with this Lot; however, the registration '462 GAX' is listed in the HPI database. Nevertheless, rospective purchasers should satisfy themselves with regard to this motorcycle's registration status prior to bidding.Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 59

2008 Royal Enfield 350cc BulletRegistration no. LJ08 BXUFrame no. ME3BABSB47C731048Engine no. 7B731048KRoyal Enfield revived the Bullet name in 1948 for a sensational new 350cc sports bike with swinging-arm rear suspension. The newcomer featured an overhead-valve engine that housed its dry-sump oil tank in a compartment in the rear of the crankcase, to which the four-speed gearbox was rigidly bolted in a form of semi-unitary construction. Production of both 350 and 500 Bullets ceased in 1962, though the model was taken up for manufacture under licence in India in the 1970s and continues in production there in much-improved form today. We are advised that this Indian-built Bullet has covered only 12 miles from new. The machine was sold new to the collection in March 2008 by Richardson's Motorcycles of Ripley, Surrey and has recorded only 12 miles since delivery (purchase invoice on file). The machine is is offered with an owner's manual and old/current V5C Registration Certificates.Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 60

2004 Royal Enfield 350cc BulletRegistration no. OU04 SYVFrame no. ME35ABDB43C630712Engine no. 3-B-630712HRoyal Enfield revived the Bullet name in 1948 for a sensational new 350cc sports bike with swinging-arm rear suspension. The newcomer featured an overhead-valve engine that housed its dry-sump oil tank in a compartment in the rear of the crankcase, to which the four-speed gearbox was rigidly bolted in a form of semi-unit construction. Confusingly, this Bullet's accompanying MoT check sheet records some 'mileage' totals in miles and others in kilometres, the most recent entry being dated 6th May 2014 at 8,699km, while the totals indicate a possible change of speedometer. The machine was acquired by the last registered keeper in December 2014 and is offered with a V5C Registration Certificate. It should be noted that a clerical error has resulted in the engine number being incorrectly recorded in the V5C.Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 608

1963 MV Agusta 50cc Liberty SportFrame no. MVL 812838Engine no. MV-L-812676Although best known for their racing and road-going four-cylinder four-strokes, MV Agusta built lightweights throughout its manufacturing career and in its early days listed small two-strokes and even a scooter. Indeed, between 1955 and 1959 they listed a moped and in 1962 introduced the 50cc Liberty, an ultra-lightweight sports roadster. The Italian Highway Code no longer required such machines to have pedals, and the Liberty was aimed squarely at youngsters who wanted something more stylish than the traditional step-thru moped. A four-stroke in a field dominated by two-strokes, the Liberty featured a three-speed twistgrip-change gearbox at first while 1967-onwards models had a foot-change four-speeder. Turismo, Sport, and Super Sport versions were available. Nicely presented, this Liberty was restored by its late owner in 2018 and is believed to have been a runner when placed in dry storage. The engine turns over with some compression. The machine is offered with a Certificato per Ciclomotore (registration document). There is no import paperwork with this Lot. The vendor has had the machine running recently.Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 610

c.1966 MV Agusta 125cc GTL Racing MotorcycleFrame no. MVGTL 659356Engine no. MV-654164Disappointed by poor sales of its 1960 line-up, which featured newcomers with engines displacing 99, 235 and 300cc respectively, MV returned to traditional capacity classes in 1961, launching the all-new Centomila in 125 and 150cc variants. They were powered by an overhead-valve four-stroke single built in unit with a four-speed gearbox, which went into MV's familiar set of lightweight cycle parts. At the 1965 Milan Show the 125/150 range was updated with five-speed gearboxes, the 125 being offered in two guises: GT with 8bhp engine, and the more sporting GTL, which had 9.6 horsepower on tap. Apparently cosmetically restored, this 'racerised' five-speed GTL carries AMRRC scrutineering stickers (undated) and a Race Day pass for Armoy in 2013, while the tank has been signed by Giacomo Agostini. The machine boasts a Dell'Orto R2709 carburettor and Smiths tachometer and is believed to have electronic ignition. A concours entrant at the 2019 'Festival of 1000 Bikes', this machine is a runner and was last ridden at Brands Hatch at an 'Italian Day' in 2018. Ideal for Historic parading, the machine is offered with a photocopy parts book and NOVA notification printout. The vendor has had the machine running recently.Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 612

1972 MV Agusta 125 GTL Super SportFrame no. MV GTL 660189 SEngine no. MV-657766In 1961 MV Agusta launched the all-new Centomila in 125 and 150cc variants. The Centomilas were powered by an overhead-valve four-stroke single built in unit with a four-speed gearbox (five speeds arrived in November 1965 on the successor GT/GTL models) which went into MV's familiar set of lightweight cycle parts. Unlike their immediate predecessors, the Centomila range (renamed GT/GTL in 1964) would prove to be an immense commercial success for the Italian firm, effectively keeping it afloat in difficult times. A comprehensive re-style in 1969 saw the GT/GTL emerge with lower, sleeker fuel tanks and a much more modern look, as seen here. This GTL displays a total of 2,770 kilometres on the odometer and would respond well to detailing. We are advised that the engine was rebuilt during restoration in 2018/19, and that the wheels were refurbished, and new tyres fitted at the same time. The engine turns over with compression and the gears engage. The machine is offered with a NOVA Acknowledgement (VIN missing 'S' suffix) and its original Italian libretto and other paperwork. The vendor has had the machine running recently.Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 614

1960 MV Agusta 99cc Checca GT ExtraFrame no. MV.GTE 580325Engine no. S-580509MV Agusta's only new introduction for 1960, the Checca was offered in two engine capacities: 83cc and 99cc, its single-cylinder overhead-valve power unit being based on that of the 125 introduced for the previous year. Built in unit with a four-speed gearbox, the Checca engine went into MV's familiar set of lightweight cycle parts. Three models were offered: the 83cc GT; 99cc GT Extra; and 99cc GT Sport, the latter featuring a slightly more powerful engine. A relatively inexpensive route to MV ownership and a potentially most rewarding project, this apparently original and un-restored Checca should be a fairly straightforward restoration (there is no speedometer). Offered with a photocopy maintenance and operation manual. There is no import paperwork or any other documentation with this Lot. The vendor has had the machine running recently.Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 62

c.1948 Swallow 122c Gadabout MkIRegistration no. not registered (see text)Frame no. None visibleEngine no. 641/22405Better known as a manufacturer of high quality sidecars, and the origins of the Jaguar car company, Blackpool-based Swallow announced the Gadabout scooter in 1946, with production commencing the following year. The Gadabout was powered initially by a 122ccc Villiers engine with three-speed gearbox, which was mounted in a sturdy frame, the side tubes of which served as exhaust pipes. The box-shaped body was topped by a slab-like seat, behind which sat the fuel tank, above the rear wheel. There was no suspension as such, apart from the compliance of the 4.00x8' tyres. A MkII version with leading-link fork was introduced for 1950, and the Gadabout continued in production into 1951, latterly alongside the 197cc Major version. This Gadabout's HPI check reveals that the registration 'LPJ 794' has lapsed and is no longer associated with this machine, which is offered without documents.Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 643

1980 Moto Morini 344cc '3½' SportFrame no. K-20498Engine no. none visibleBefore the arrival of its family of 72-degree v-twin roadsters, Morini's reputation had rested mainly on its highly successful double-overhead-cam single-cylinder racers. An entirely different approach was adopted for the v-twins: each cylinder's two valves were pushrod-operated by a single camshaft while the combustion chambers were located, not in the flat-faced cylinder heads, but in the piston crowns. Coupled to a six-speed gearbox, this superb motor's performance belied its lack of capacity, endowing the lightweight, nimble-footed Morini with a top speed of around 100mph. Sport and Strada (touring) versions were made, early models having drum brakes, later ones discs. Apparently original and un-restored, this K-series '3½' Sport displays a total of 47,299km on the odometer. Imported at date unknown, the machine is offered with an invoice dated June 2019 for oil and a battery. We are advised that this motorcycle was a runner when placed in storage and that it has been cosmetically tidied up: frame painted, new pipes, etc. There is no import paperwork with this Lot. The vendor has had the machine running recently.Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 645

1956 Parilla 175cc Lusso VeloceRegistration no. JSL 696Frame no. 406129Engine no. 406129Giovanni Parrilla founded his Milan workshop in 1946, initially offering service on pumps and injectors and later that year showed his first motorcycle, an overhead camshaft 250cc model. This high-cam 175cc version was introduced in 1956, with the ability to rev to 8,000rpm and part of its restoration by the previous owner was the fitting of the sportier X1 cam and MSDS big valve cylinder head with a 22mm carburettor, plus a stronger seven-plate Ducati clutch. Very advanced for 1956, the gearbox is a cassette type that can be emoved without taking the power unit out of the frame. It was ridden successfully in the 2006 Moto Giro, providing six days of reliable enjoyment with minimal physical efort. As well as the 12-volt electronic ignition, it comes with a rare owner's handbook and instruction manual and its appearance and quality of design makes it one of the most attractive lightweights whose looks and style belie its age. For an enthusiast looking for an ideal machine for the historic class in the ever more popular Moto Giro, it warrants careful consideration. Offered with V5C Registration Certificate.For further information on this lot please visit Bonhams.com

Lot 657

Property of a deceased's estate 1977 Laverda 500cc AlpinoRegistration no. not registeredFrame no. 28120Engine no. 1273Broadening its range of models, Laverda launched the new Alpino 350/500 middleweight twins in 1977. Boasting twin overhead camshafts, four valves per cylinder, a six-speed gearbox, triple disc brakes, an electric starter and cast alloy wheels, the Alpino was state of the art for its day but handicapped, in the UK at least, by a price that pitted it against much larger machines from Japan. Relatively few were sold in the UK and they remain a rare sight in this country today. Formerly resident in Spain, this Laverda Alpino was imported by Direct Classic Imports Ltd of Holt Heath, Worcestershire and sold to the late owner on 25th May 2017 (purchase invoice on file). Also on file is an expired MoT (February 2021); a copy of the machine's Spanish registration document; and assorted DVLA correspondence (perusal recommended). Last run in January 2021, the machine is described as in generally good condition throughout. For further information on this lot please visit Bonhams.com

Lot 664

c.1929 Rudge Whitworth Four-valveRegistration no. not registeredFrame no. 33668Engine no. 54287 / 54243From the first, Rudge adopted state-of-the-art ideas, such as the inlet-over-exhaust design for cylinder heads. They followed with the Rudge-Multi variable gear, and, only three years after making their first motorcycle, won the Senior Isle of Man TT in 1914. They were early adopters of technology and were one of the first to provide a four-speed gearbox, four-valve cylinder heads, and interconnected brakes, not to mention the lever-operated centre stand. The sports model was the 499cc Ulster, so named following the firm's win in the Ulster Grand prix in 1928. Parallel four valve heads featured on the 500s and 350s from 1924, and for 1931 the four valve radial head was also adopted for some of the models. Little is known of the history of 33668, which is part of a deceased estate, except that it seems to have entered the present ownership in March 1978; although at that time it was accompanied by an unrelated log book. At the time of cataloguing, we are uncertain whether it is a 350 or 500 model. It has been standing for many years, will require extensive re-commissioning or restoration, and is sold strictly as viewed. We have no knowledge of its mechanical condition, except that the engine does not turn over. There are no documents with the machine. Prospective bidders should satisfy themselves as to the age, completeness and originality of the machine, together with the vintage and compatibility of its component parts prior to bidding.Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 666

1928 Sunbeam 347cc Model 8Registration no. RO 9522Frame no. C1241Engine no. K1242Sunbeam's entry into the motorcycle market in 1912 was innovative, featuring a two-speed countershaft gearbox, a lever operated clutch, and enclosed primary and final drives via chains. Between the wars, in the skilled hands of exponents such as Alec Bennett, Charles Dodson and the legendary rider and tuner George Dance, Sunbeam advanced their reputation in leaps and bounds, both in trials and road racing. With victories in the Senior TT in 1920, 1922, and 1929, racing success created greater demand for their products, and by the early thirties Sunbeam were lauded as producers of one of the 'quality' sporting machines of the day. In 1924, they introduced their 350 and 500 overhead-valve models numbered model 8 and 9 respectively. Originally with a centre exhaust port, and a split downtube frame to match, by 1926 this had changed to an offset single port, with twin ports as an option. Little is known of the history of 'RO 9522', which is part of a deceased estate, except that it appears to have entered the present ownership in April 1978, as detailed in the accompanying duplicate RF60 green log book dating from 24th October 1965. A single port 350, 'RO 9522' is one of the last flat tank overhead-valve models. It has been standing for many years, will require extensive re-commissioning or restoration, and is sold strictly as viewed. We have no knowledge of its mechanical condition, except that the engine does not turn over. Documentation comprises the aforementioned RF60 log book, an old-style V5C, and a letter from Hertfordshire County Council to the previous owner.Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 672

1931 Peugeot 327cc P111Registration no. not registeredFrame no. P111/31328Engine no. 91416Formerly producers of tools, coffee mills, umbrella spikes and corsetry, Peugeot commenced its long-standing connection with transportation in 1882 when it added cycle manufacture to its portfolio. A wide range of motorcycles was manufactured between the wars, one landmark development being the introduction of a range of unitary construction four-stroke singles in the mid-1920s. At this time almost all motorcycles had a separate engine and gearbox, linked by an exposed primary drive chain. Combining the engine and gearbox within a single assembly made for a compact and clean layout, which was a strong selling point for many prospective customers. Apparently, an older restoration, this unitary construction P111 sidevalve has been in storage since 2001 and will require re-commissioning before further use. The machine last ran in April 2021 and is described by the vendor as in fair/good condition. There are no documents with this Lot. For further information on this lot please visit Bonhams.com

Lot 675

1956/1958 AJS 498cc Model 20Registration no. 415 UYVFrame no. A47002Engine no. 58/20 51250By 1948, all the big makers had, or were developing, twin-cylinder designs to compete with the Triumph Speed Twin. The AJS/Matchless concern was no different, announcing the Model 20 and G9 late in 1948. '415 UYV' was acquired by the owner some years ago, at which time it was in need of work. The vendor advises that the gearbox was given to an AJS specialist to be stripped and rebuilt. He further advises that the engine was stripped and rebuilt, and the electrics were converted to 12 volts. Although substantially completed and registered, the AJS has not been run since restoration, due to pressure of work and health issues. Said to require a modest amount of finishing and commissioning, the vendor believes it will provide a fine motorcycle for a new owner. Documentation comprises a current V5C, an owners club dating letter and sundry papers.Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 692

1937 Vincent-HRD 498cc Series-A CometRegistration no. BUP 616Frame no. D1272 Rear Frame no. D1272Engine no. C420 Crankcase Mating no. 6/6• Rare Series A• Matching engine, upper frame, rear frame and gearbox• Superb restoration• Awarded Best Post Vintage machine at Stafford showAfter an initial flirtation with Swiss-made MAG engines, Philip Vincent settled on JAP engines, as his predecessor had, and introduced his trademark rear-sprung frame. A Rudge 'Python' engine was offered as an alternative to the JAP, but, unimpressed by the standard of 'bought-in' engines, Vincent and fellow engineer Phil Irving designed their own engine for 1934, with their high-camshaft layout. Initial models with this engine were the Meteor and Comet, later variations being the Comet Special and the TT model. The Rapide twin was to follow in 1936, but production lasted only until war broke out in 1939.The vendor purchased 'BUP 616' in 2007 (sales receipt on file), in complete running order, but in need of attention. He therefore set about a complete restoration of the machine to his usual high standard. The machine was completely stripped, and all the cycle parts were refurbished and repainted, as necessary. Parts were re-chromed or replaced, and the petrol tank refurbishment was entrusted to specialists Lewis and Templeton. The engine and gearbox were stripped as needed and rebuilt as necessary. The bottom end of the engine was found to be sound and, not requiring any attention, was left undisturbed. The owner advises that the cylinder head was totally refurbished. The Miller Dynomag and Amal carburettor were both reconditioned by specialists, as were the Smiths clock and speedometer. Completing the restoration in 2009, the vendor exhibited the Comet at the Stafford show in April 2009, where it was awarded Best Post-Vintage machine. The owner covered approximately 100 shakedown miles on BUP before placing the machine on display at the Lakeland Motor Museum, where it has remained since. The engine has been turned over at regular intervals and will require modest recommissioning if a new owner is to use it on the road.The history file includes photocopies of the Engine Specification Sheet and Works Order Form, which detail that this Comet was despatched on 14th February 1937 to Mr. W. Parvis, equipped with Amal carburettor, Miller Dynomag, TT handlebars, 120mph speedometer, Dunlop saddle and pillion seat. It still has the original engine, upper frame, rear frame, and gearbox, and was registered in Durham in February 1937. Other documentation accompanying 'BUP 616' includes a current V5C, an old-type V5C, an old V5, a duplicate VE60 green logbook dating from June 1970, an original instruction book, reproduction sales brochure, photocopy parts list, and various invoices and receipts, together with sundry papers.For further information on this lot please visit Bonhams.com

Lot 695

1953 Vincent 499cc Series-C CometRegistration no. BEC 692Frame no. RC/1/11172 Rear Frame no. RC/1/11172Engine no. F5AB/2A/9272 Crankcase Mating no. 74JJ/74JJ• Owned intermittently since 1977• Matching numbers example• Superb restorationThere is an apocryphal tale of the Series A twins being conceived as a result of two single-cylinder drawings being overlapped; in the same way, it could be said that the post-war single cylinder engine was brought about by the use of a rubber – removing the rear cylinder of the existing twin-pot design. In other respects, the layout was almost identical, with the same 'frameless' cycle parts being employed for the single and the twin. On the singles the rear cylinder was replaced with a cast alloy beam, and the gearbox employed was the familiar Burman item. Announced in late 1948, a few single cylinder Meteors were produced before being joined soon after by the Comet in Series C form with Girdraulic forks, as opposed to the Brampton girders on the Meteor. The Comet was a little more expensive than the Meteor, and equipped with a higher compression ratio, front propstands, and Girdraulic forks.'BEC 692' was sold new and registered on 28th July 1953 by dealers James Walker of Kendal. There were three owners before it was purchased by the present owner in 1977. Whilst he parted with the machine in 1979, selling it back to the previous owner, he then repurchased it 1999. In need of work by then, he undertook a full restoration of the machine with the assistance of talented local engineer Douglas Tyson of Keswick. Anything required in the restoration was done, and some improvements were incorporated, such as the electronic voltage regulator. Refurbishment was completed in 2000, and the owner used the machine every year thereafter, on various VOC rallies, in the Isle of Man, and on continental rallies, until it was put on SORN in 2013. Since then, 'BEC 692' has been turned over at regular intervals whilst on display at the Lakeland Motor Museum. It should only require light recommissioning before returning to road duties with a new owner.Documentation comprises a current V5C, an old V5C, an old V5, the original VE60 buff logbook, a quantity of old MoT certificates, a large quantity of receipts/invoices for parts/work, and sundry papers.For further information on this lot please visit Bonhams.com

Lot 701

1939 Zündapp KS600 Motorcycle CombinationRegistration no. not UK registeredFrame no. 0027253Engine no. 519536•Rare Zündapp OHV sports model•Zündapp sports sidecar•Last ridden circa 10 years ago•Requires re-commissioningFounded at the height of WWI to manufacture armaments, Zündapp found a new role post-war as a producer of motorcycles under the direction of new owner, Dr Fritz Neumeyer, building its first machine, a Levis-powered two-stroke, in 1921. The firm began making its own engines in 1924, selling more than 10,000 machines that year, and at the Berlin Motor Show in 1933 introduced the first of the horizontally opposed, four-stroke twins that it is best remembered for. These formed part of an extensive and diverse range of models, all but the smallest two-stroke being designated by the letter 'K' (for kardan, meaning 'shaft'). Among the models premiered were the K400 (398cc) and K500 (496cc) sidevalve twins, both of which employed designer Richard Küchen's unconventional all-chain four-speed 'gearbox' and, as the designation suggests, shaft final drive. Introduced at the same time was another Küchen design: a horizontally opposed four made in 598cc (K600) and 798cc (K800) capacities. Common to all the larger models and eminently suited to withstanding the stresses and strains imposed by travel on unmade roads, the robust frame and girder forks were made of pressed steel, an advanced feature at the time. The new Zündapp range was an enormous success, and in September 1933 the firm produced its 100,000th machine, quite an achievement after little more than a decade as a motorcycle manufacturer. Immediately prior to the outbreak of war in September 1939, Zündapp introduced an overhead-valve twin, the KS600. The latter's 597cc engine produced 28bhp, and like the rest of the larger Zündapps the KS600 featured the chain-drive 'gearbox', shaft drive, and the pressed steel frame and forks. The larger Zündapps saw service in substantial numbers with the German Army during WW2, military versions being identified by a 'W' (Wehrmacht) model suffix.Dated as of 1939 manufacture by its VIN plate, this beautiful KS600 is attached to a handsome Zündapp sports sidecar and is described by the private vendor as in 'original and un-restored' condition. Last ridden some 10 years ago, this rare German combination will require re-commissioning before returning to the road. There is no paperwork of any kind with this Lot.Footnotes:This Lot is subject to VAT on imported items at 5% on Hammer Price and Buyer's Premium, payable by the Buyer.This lot is subject to a fee of £125 + VAT payable by the Buyer, to undertake the relevant NOVA and C88 (Customs) clearance applications. Please see the Conditions of Sale for further information.This lot is subject to the following lot symbols: * N* VAT on imported items at a preferential rate of 5% on Hammer Price and the prevailing rate on Buyer's Premium.N If purchased by a UK resident, this machine is subject to a NOVA declaration, whilst the responsibility of submitting the NOVA rests with the Buyer to do so, Bonhams will facilitate the process by engaging an agent (CARS) to undertake the NOVA on the Buyer's behalf. A fee of £250 + VAT to do so will be added to the Buyer's invoice.For further information on this lot please visit Bonhams.com

Lot 706

Offered from the National Motorcycle Museum Collection 1949 Vincent-HRD 998cc Series-B Black Shadow Registration no. VAS 492Frame no. R3588B Rear Frame No. R3588BEngine no. F10AB/1B/1688 Crankcase Mating No. Q7/Q7•Matching upper frame, rear frame, and engine numbers•Delivered new to Australia•Returned to the UK circa 2002Ever since the Series A's arrival in 1937, the Vincent v-twin has been synonymous with design innovation, engineering excellence and superlative high performance. From Rollie Free's capture of the 'world's fastest production motorcycle' record in 1948 on a tuned Series-B Black Shadow to the final, fully enclosed Black Knight and Black Prince, Philip Vincent's stress on appearance and performance is legendary. His machines bristled with innovative features, offering adjustment of brake pedal, footrests, seat height, and gear-change lever. The finish was to a very high standard commensurate with the cost of the machine, which was virtually double that of any of its contemporaries.But above all else it was the 1,000cc v-twin's stupendous performance that captivated motorcyclists, whether they could afford one or not. The appeal of the Vincent, and the Black Shadow in particular, lay in its ability to out-perform just about every other vehicle on the road, and in the early post-war years there was nothing to compare with it. This was a time when the average family saloon was barely capable of reaching 70mph, and not until the advent of Jaguar's XK120 was there a production sports car that could live with the thundering v-twins from Stevenage. The outbreak of WW2 in 1939 had brought production of all Series A models to a halt, and when Vincent resumed production at the war's end it was with the all-new Series B. Its rear suspension aside, the Series A Vincent-HRD had been conventional enough: tubular steel frame, girder forks, separate gearbox, etc but with the Series B Messrs Vincent and Irving effectively established the marque's reputation for the defiance of convention in the pursuit of engineering excellence. For a start there was no 'frame' as such, merely a fabricated box attached to the cylinder heads, that served as the oil tank and incorporated the headstock and the attachment point for the rear springs. The gearbox was integral with the engine, and the swinging arm pivoted directly in the engine/gearbox casings, features commonplace today but unusual 60 years ago. Only in his retention of the pre-war Brampton girder fork did Phillip Vincent appear to be lagging behind other manufacturers, almost all of which had switched to telescopics, but this apparent shortcoming would soon be addressed by the introduction of the famous 'Girdraulic' fork.When it was introduced in 1946, the Vincent-HRD Series-B Rapide was immediately the fastest production motorcycle on sale anywhere, with a top speed of 110mph. The basic design clearly had even greater potential though, as was demonstrated by the tuned Rapide known as 'Gunga Din', ridden by factory tester George Brown, that proved unbeatable in UK motorcycle racing in the late 1940s. Private owners too had expressed an interest in extracting more performance from their machines, all of which convinced Philip Vincent that a market existed for a sports version. Despite opposition from within the company's higher management, Vincent pressed ahead with his plans and together with Chief Engineer Phil Irving, clandestinely assembled a brace of tuned Rapides. The prototypes incorporated gas-flowed cylinder heads, Comet cams, polished con-rods and larger carburettors, these changes being good for a maximum output of 55bhp despite a compression ratio limited to only 7.3:1 by the 72-octane petrol that was the best available in the UK at the time. Ribbed brake drums were fitted to cope with the increased performance, while in a marketing masterstroke Vincent specified a 5'-diameter '150mph' speedometer and black-finished engine cases for his new baby – the Black Shadow. With a claimed top speed of 125mph, soon born out by road tests, the Vincent Black Shadow was quite simply the fastest road vehicle of its day. Deliveries commenced in the spring of 1948 and only around 70-or-so Series-B Black Shadows had been made before the Series-C's introduction at that year's Earl's Court Motorcycle Show. Nevertheless, it would be 1950 before all Vincents left the factory in Series C specification, during which period references to 'HRD' were phased out. The Black Shadow was indeed a legend in its own lifetime, and in the half-century since production ceased, the esteem in which this iconic motorcycle is held has only increased, fuelling the demand among discerning collectors for fine examples of the marque, such as that offered here. This rare Series-B Black Shadow was despatched to Elder Smith in Sydney, Australia on 1st February 1949. The Vincent was later taken to New Zealand and remained there until December 2000 when it returned to Australia. Its new owner commissioned local marque specialist Terry Prince to make the machine roadworthy, which included incorporating numerous stainless steel fasteners and converting the electrics to 12-volt operation. In April 2002 the Vincent was sold to a prominent private collector in the UK and registered here as 'VAS 492' (see purchase agreement on file). It is not known when it was acquired by the NMM. Accompanying paperwork consists of a copy of the Works Order Form; a VOC Dating Certificate; an expired tax disc; and an MoT (2003-2004). There is no V5C document with this motorcycle. The machine's mechanical condition is not known; accordingly, prospective purchasers must satisfy themselves with regard to its condition, completeness, correctness, or otherwise prior to bidding.For further information on this lot please visit Bonhams.com

Lot 709

Offered from the National Motorcycle Museum Collection 1930 Brough Superior OHV 680 'Black Alpine' (see text)Registration no. JO 2055Frame no. 5/1105 (see text)Engine no. GTO/H 13694/S•The ultimate middleweight Brough•Restored in the late 1970s/early 1980s•Owned by the NMM since 1995With the SS80 and SS100 well established, it was decided to add a smaller and cheaper alternative to the Brough Superior range. JAP was already producing a 674cc sidevalve v-twin engine and this unit, redesigned with overhead valves, went into Brough's new 'Overhead 680'. Launched at the Olympia Motorcycle Show in 1926, the 'Miniature SS100', as George Brough called it, entered production for 1927. The new middleweight Brough was an instant success and for 1930 was joined by a version to higher specification. First seen at the 1929 Motorcycle Show, the newcomer was dubbed 'Black Alpine 680', a reference to the lavishly equipped SS100 Alpine Grand Sports and the fact that the newcomer boasted a distinctive all-black eggshell finish. Principal mechanical difference from the standard Overhead 680 was the adoption of the patented Bentley & Draper sprung frame. Built as a standard Overhead 680, this machine was despatched from the factory on 16th March 1931 bound for Layton's of Oxford and first owned by one Alan William Massey of Watford, Hertfordshire. The Brough Club first heard of this machine in 1981 when it was listed as owned in Birmingham.Colin Wall, the National Motorcycle Museum's restorer, discovered this Brough around 1976 in a council lockup garage. Colin was told by the seller that the machine had come from the Birmingham suburb of Handsworth where he had found it in a garden. It had a box sidecar attached and had been used by a window cleaner. Colin bought the Brough and a Sunbeam Model 2 for £900 in total, the Brough costing £700...The Brough was in very poor condition and it took five years to acquire missing parts and complete the restoration. The engine, gearbox and clutch were fully rebuilt (one of the cylinder barrels, which had cracked, being replaced) and a new fuel tank made by a craftsman in Nottingham. Extensive repairs enabled the original tinware to be retained, while the crash bars currently fitted were in place when purchased.Colin completed the rebuild in 1981 and sold the Brough to NMM founder Roy Richards around 1995. Roy wanted a machine to Black Alpine specification, so twin headlights were fitted. The Brough was started on a regular basis but not used on the road.'JO 2055' is recorded with the DVLA as being registered in June 1982 as a 1931 model. The HPI check sheet is on file but there is no V5C present. It should be noted that in addition to the original factory frame number stamp on the headstock, number '1195' has also been stamped on the front downtube, and that the gearbox is not the original to this machine. The machine's mechanical condition is not known; accordingly, prospective purchasers must satisfy themselves with regard to its condition, completeness, correctness, or otherwise prior to bidding.For further information on this lot please visit Bonhams.com

Lot 710

Offered from the National Motorcycle Museum Collection c.1932 Brough Superior Overhead 680 to Overhead 500 SpecificationRegistration no. not registeredFrame no. 5/1195Engine no. PTOC/H T3918/S (see text) Gearbox no. 7157 and 2632•In its current configuration since the 1950s•Rebuilt to running order by the early 1960s•Acquired by the NMM in 2006George Brough premiered two new sports models at the Motor Cycle Show in November 1930: the Overhead 680 and Overhead 500, the latter powered by a JAP racing engine that had first appeared at that year's Isle of Man TT races. The 500cc JAP was effectively two of the firm's racing 250 singles on a beefed-up crankcase, the cylinder heads and barrels being held down by long through-bolts as on the contemporary SS100. Cotton, Excelsior and OK-Supreme had used these engines at the TT, but having showed promise in practice, all failed during the race, sidelined by incorrectly hardened cam followers. No doubt wishing to put this embarrassing incident behind them, JAP abandoned the project and sold the remaining engines to George Brough. The new Overhead models used identical cycle parts and were available with rigid frames only, the 680 being priced at £99 15s and the 500 at £105. Only nine Overhead 500s were built, making it one of the rarest of catalogued Brough Superior motorcycles. Describing the Overhead 500, the Brough catalogue had this to say: 'Specification exactly as 'Overhead 680' with the exception of the Engine which is a specially produced 500cc Racing JAP Twin modified for high road speed and long-distance touring requirements... Capable of 85mph, this machine is convertible to a 'pukka' racing machine quite easily by the Owner.'Frame number '5/1195' left the Brough works on 4th November 1932 as part of a standard Overhead 680 model supplied to Godfrey's in London. The original registration number is not known, and the original engine has been lost, but the original gearbox is still present. By the 1950s '5/1195' had been fitted with the current 500cc overhead-valve JAP engine 'PTOC/H T3918/S'.Rebuilt to running order by the early 1960s, the Brough was sold to the NMM in 2006 by the late Brian Verrall. The machine's mechanical condition is not known; accordingly, prospective purchasers must satisfy themselves with regard to its condition, completeness, correctness, or otherwise prior to bidding. Offered with a history file.For further information on this lot please visit Bonhams.com

Lot 712

Offered from the National Motorcycle Museum Collection c.1933 Rudge 499cc TT Replica Racing MotorcycleRegistration no. not registeredFrame no. 48011Engine no. 35•One of the most desirable sports roadsters of the 1930s•An older restoration•Bronze cylinder headThe full potential of Rudge's four-valves-per-cylinder engine design was slow to emerge, but in 1928 Graham Walker's works 500 became the first motorcycle to win a road race - the Ulster Grand Prix - at an average speed in excess of 80mph, a feat that led to the introduction of the legendary 'Ulster' sports model. Early engines deployed parallel valves in a pent-roof combustion chamber, then in 1930 a trio of 350s appeared at the Isle of Man with radially-disposed valves, the new arrangement demonstrating its superiority when the Rudges finished 1st, 2nd and 3rd in the Junior TT. The next move was to produce a 'head for the 500 featuring parallel inlet valves and radial exhausts, and this semi-radial arrangement debuted on the works bikes for 1931. Chief advantage of the semi-radial valve gear was its reduced complication, but although the works 500s proved every bit as fast as before, they were beset by handling problems. Altered weight distribution caused by re-positioning the magneto behind the cylinder was diagnosed as the culprit, and the mag was promptly moved back to its original position. The TT Replica went from parallel valves in 1931 to radial in 1932 and then, finally, to the semi-radial arrangement for 1933, the last year of this model's production. Semi-radial valves were adopted for the 500cc Ulster for '33, and Rudge's top-of-the-range model would keep this arrangement until production ceased in 1939. This Rudge TT Replica's frame was built in May 1932 while the engine consists of a 1933 TTR bottom end and a 1934/1935 bronze cylinder head. The gearbox is made up from parts dating from 1930-1937 (linkage not connected) and the rear mudguard has the wrong profile. There are no documents with this Lot. The machine's mechanical condition is not known; accordingly, prospective purchasers must satisfy themselves with regard to its condition, completeness, correctness, or otherwise prior to bidding.For further information on this lot please visit Bonhams.com

Lot 713

Offered from the National Motorcycle Museum Collection 1975 Norton-Cosworth Challenge P86 750cc Racing MotorcycleFrame no. JN 1Engine no. none visible•Ultra-rare Norton works racer•No engine/gearbox internals•For display purposes onlyThe urgent need to replace its ageing Commando twin with something more modern for both road and track prompted NVT to commission a new engine design from Cosworth Engineering. First shown in 1975, the Challenge water-cooled twin borrowed heavily from Cosworth's 3.0-litre DFV V8 Formula 1 engine, yet despite a claimed maximum power output of 115-120bhp the racer's handful of outings were disappointing, rider Dave Croxford being unable to match his old Commando-powered machine's lap times. With NVT on the point of collapse, the project was shelved in 1976.Writing in Classic Bike magazine (December 1981 issue) Alan Cathcart states that of the four bikes constructed, two were sent to the USA while two remained in the UK until sold to a German entrepreneur. The latter then sold 'two engines and enough chassis bits to make a compete bike' to Norton collector Ian Sutherland, and the resulting machine was ridden by Cathcart at Donington Park's 50th Anniversary meeting in August 1981. Cathcart's Challenge looked the same as the one last ridden by Croxford, complete with Norton's own leading-axle front fork and cast-aluminium, twin-shock swinging arm. Sutherland continued with development and ridden by Rob Sewell, a revised version up-dated with Harris cycle parts came close to a 100mph lap at the Isle of Man TT. The design's full potential would not be realised until 1988 however, when Roger Marshall won Daytona's Pro Twins race on Bob Graves' Challenge-based Quantel.The Challenge offered here lacks engine/gearbox internals and thus is offered for display purposes only. Nevertheless, given that in recent years Messrs Crosthwaite & Gardiner have built pre-war Auto Union Grand Prix cars from scratch, and various individuals have recreated the legendary Moto Guzzi V8, re-manufacturing engine components for the twin-cylinder Challenge should prove comparatively straightforward should the next owner so desire. The machine's mechanical condition is not known; accordingly, prospective purchasers must satisfy themselves with regard to its condition, completeness, correctness, or otherwise prior to bidding.For further information on this lot please visit Bonhams.com

Lot 717

Offered from the National Motorcycle Museum Collection 1913 Rover 3½hp Standard 3 Speed Motorcycle CombinationRegistration no. AR 4189Frame no. S 40108Engine no. 3994 B•An older restoration•On museum display since the 1980s•Offered with Pioneer CertificateDesigned by James Starley, the Rover safety bicycle represented a breakthrough in bicycle design at the end of the 19th Century. In November 1903 the Rover Cycle Company presented its first motorcycle, an advanced design that featured a well-designed sidevalve engine, spray carburettor, robust diamond-type frame with twin front down-tubes, and excellent quality of finish. It created a lot of interest and more than 1,200 were sold in 1904. Not all of Rover's rivals could match its reliability though, and public confidence in motorcycles waned as a result, causing a downturn in sales. Rather than jeopardise its reputation, Rover stopped motorcycle production entirely, concentrating on its bicycle business and the development of a Rover car. In 1910 the motorcycle's future seemed more assured, and designer John Greenwood (later of Sunbeam fame) was commissioned to draw up a new engine. A 499cc sidevalve rated at 3½hp, the new motor incorporated spring-loaded tappets and positioned its Bosch magneto, driven by a 'silent' inverted-tooth chain, high and dry behind the cylinder. The carburettor was by Brown & Barlow and the forks by Druid. At the end of 1914 a three-speed countershaft gearbox was added, and from then until its production ceased in 1924, few changes were made to the sidevalve single. Before the finish, unitary construction overhead-valve 250cc and 350cc models were introduced, but by this time the company had decided there was more future in car production and the final Rover motorcycles were sold in 1926.This apparently well-restored Veteran Rover is equipped with the Sturmey-Archer three-speed hub gear and is attached to one of the most attractive wickerwork sidecars we have ever seen. Correspondence on file shows that the machine had been offered as a loan to the Museum in 1983 by its then owner, Jefferson Davies, to whom it had been registered in August 1957. Last taxed in July 1970 and on display since the mid/late 1980s, the Rover was licensed to the Museum on 24th September 2008. Noteworthy features include a Miller acetylene headlight; Bosch magneto; Smiths 60mph speedometer; bulb horn; Brooks saddle; AA and RAC member's badges; and Lucas rear lighting. This eye-catching machine is offered with a history file containing an old-style continuation logbook (1947); Pioneer Certificate; V5C registration document; technical/historical literature, etc, etc. The machine's mechanical condition is not known; accordingly, prospective purchasers must satisfy themselves with regard to its condition, completeness, correctness, or otherwise prior to bidding.For further information on this lot please visit Bonhams.com

Lot 718

Offered from the National Motorcycle Museum Collection 1915 New Hudson 6hp Big Six Motorcycle CombinationRegistration no. AE 6346 (see text)Frame no. 912Engine no. 1268•Rare WWI-era New Hudson•An older restoration•Three-speed countershaft gearboxBirmingham-based New Hudson started out as a bicycle manufacturer in the Victorian era. The company's first powered machine of 1903 used a clip-on Minerva engine, and this was followed by the first proper motorcycle in 1910. The first model powered by an engine of its own make arrived in 1911 and New Hudson made its Isle of Man TT debut that same year. However, major competition success eluded the Birmingham firm until Bert Le Vack took over racing development, becoming the first man to lap Brooklands at over 100mph on a 500cc machine in 1927. Le Vack's mount was powered by a development of New Hudson's own overhead-valve engine that had first appeared at the Isle of Man TT in 1924, and this handsome power unit was also used by the factory team in the 'Island' in 1927, works rider Jimmy Guthrie finishing the Senior race in second place. New Hudson announced a new range for 1931, but the onset of economic depression did little to encourage sales and in 1933 the company, by then manufacturers of Girling automotive components, ceased to build motorcycles. There was a brief return in 1940 with the New Hudson Autocycle, later built by BSA. The magnificent motorcycle combination offered here is a rare example of New Hudson's 770cc Big Six, which was a new introduction for 1913. This example has the three-speed countershaft gearbox, making it one of the more practical 'sidecar tugs' of the day. Other noteworthy features include a Bosch magneto; electric lighting with Lucas control unit; electric horn; AA member's badge; leather-faced panniers; and luggage racks (sidecar's foldable). There is no paperwork with this Lot apart from an HPI check sheet (recording the make as New Holland!). The registration 'AE 6346' is recorded in the HPI database; nevertheless, prospective purchasers should satisfy themselves with regard to this motorcycle's registration status prior to bidding. The machine's mechanical condition is not known; accordingly, prospective purchasers must satisfy themselves with regard to its condition, completeness, correctness, or otherwise prior to bidding.For further information on this lot please visit Bonhams.com

Lot 719

Offered from the National Motorcycle Museum Collection 1923 Martinsyde 495cc Motorcycle CombinationRegistration no. FE 5211 (see text)Frame no. 221285Engine no. H/221283•Late example of the marque•Extremely rare model•An older restorationThe British firm of Martinsyde was founded in 1908 when Helmuth Paul Martin and George Harris Handasyde went into partnership to build aircraft. By the end of WWI Martinsyde was Britain's third largest aircraft manufacturer, occupying sites at Brooklands and Woking. Faced with a sharp downturn in demand for its products, the firm turned to motorcycle production at the war's end having acquired the rights to an unusual exhaust-over-inlet v-twin engine, designed by Howard Newman, and an AJS three-speed gearbox. Martinsyde made its first public appearance at the 1919 Motorcycle Show at Olympia, displaying a 6hp combination powered by the 678cc version of Newman's engine. Problems caused by unsatisfactory frame components having been overcome, motorcycle production got properly underway early in 1920. The company's first machines were marketed as Martinsyde-Newmans, abbreviated to simply Martinsyde after Newman's departure. 495cc v-twin and 350cc single-cylinder models were added to the range and Martinsydes began to feature in competitions, achieving some notable successes at Brooklands and the Scottish Six Days Trial. In November 1921 Martinsyde rider H H Bowen captured the One-Hour record at Brooklands, covering 77.58 miles on the 24th and 78.13 miles on the 29th of that month. Although of unusual layout, the Martinsyde motor was nothing if not durable, its maker's advertising confidently declaring that 'You cannot tire the Martinsyde engine'. Many years after the factory's closure, Martinsydes were still setting records, their most astonishing achievement of modern times being Neil Bromilow's circumnavigation of Australia, a 9,933-mile marathon that took him 34 days to complete in 1984. Sadly, in 1922 a disastrous fire destroyed the works and Martinsyde went into liquidation, its name and remaining stock being acquired by BAT. The last complete machine was sold in 1923 and few examples - a little over 30 according to the Martinsyde Register - of the 2,000-or-so made survive today. Even rarer than the 680cc twins, this 495cc Martinsyde comes with an old-style buff logbook (issued in 1963) showing that at that time it was licensed as a solo, the change to sidecar being made shortly thereafter. The logbook confirms matching frame and engine numbers. It should be noted that the registration 'FE 5211' has lapsed and is not recorded in the HPI database; accordingly, prospective purchasers should satisfy themselves with regard to this vehicle's registration status prior to bidding. Apparently, an older restoration, the machine is offered with Martinsyde Register correspondence and a photocopied manufacturer's brochure. The machine's mechanical condition is not known; accordingly, prospective purchasers must satisfy themselves with regard to its condition, completeness, correctness, or otherwise prior to bidding. It should be noted that this machine is recorded as a 680cc model in the Martinsyde Register.For further information on this lot please visit Bonhams.com

Lot 720

Offered from the National Motorcycle Museum Collection 1921 Martinsyde-Newman 680cc Motorcycle CombinationRegistration no. KS 1316Frame no. NO 395Engine no. NO 395•Early example of the marque•Matching frame, engine and gearbox•An older restorationThe British firm of Martinsyde was founded in 1908 when Helmuth Paul Martin and George Harris Handasyde went into partnership to build aircraft. By the end of WWI Martinsyde was Britain's third largest aircraft manufacturer, occupying sites at Brooklands and Woking. Faced with a sharp downturn in demand for its products, the firm turned to motorcycle production at the war's end, having acquired the rights to an exhaust-over-inlet engine, designed by Howard Newman (also associated with Ivy motorcycles) and an AJS three-speed gearbox. Problems caused by unsatisfactory fame components having been overcome, motorcycle production got properly underway in 1919. The company's first machines, powered by Newman's unusual 680cc exhaust-over-inlet v-twin engine, were marketed as Martinsyde-Newmans, abbreviated to simply Martinsyde after Newman's departure. Smaller, single-cylinder models anda 495cc v-twin were added to the range and Martinsydes began to feature in competitions, achieving some successes at Brooklands and the Scottish Six Days Trial. Sadly, a disastrous fire in 1922 destroyed the works and Martinsyde went into liquidation, its name and remaining stock being acquired by BAT. The last complete Martinsyde was sold in 1923 and few examples of the estimated 2,000-or-so machines built survive today.This rare Martinsyde-Newman was acquired by the National Motorcycle Museum in July 2004 via the late Brian Verrall, having previously belonged to one Edward McKnight of Melrose. Noteworthy features include a Cowie speedometer; acetylene lighting; Lucas 'King of the Road' horn; and a tax disc that expired in 1928. Apparently, an older restoration, the machine is offered with an old-style V5C Registration Certificate and an HPI check sheet. It should be noted that the latter records the machine as an insurance write-off; accordingly, prospective purchasers should satisfy themselves with regard to this motorcycle's registration status prior to bidding. The machine's mechanical condition is not known; accordingly, prospective purchasers must satisfy themselves with regard to its condition, completeness, correctness, or otherwise prior to bidding.For further information on this lot please visit Bonhams.com

Lot 721

Offered from the National Motorcycle Museum Collection 1916 Alldays Allon 548cc Motorcycle CombinationRegistration no. not registeredFrame no. unable to locateEngine no. unable to locate•Rare Birmingham-built motorcycle combination•Twin-cylinder two-stroke engine•An older restoration'A new twin two-stroke of extremely interesting design is being constructed by Messrs Alldays & Onions, the makers of the well-known Allon two-stroke.' – Motor Cycling, 5th October 1915.A firm that could trace its origins as far back as the 17th Century, the Birmingham-based Alldays & Onions Pneumatic Engineering Company built its first automobile in 1898 and its first motorcycle in 1903. Car production ended around 1918 but that of motorcycles continued at the firm's Matchless works in Birmingham until the late 1920s. Early and late types were marketed as Alldays, but from 1915 to 1924 the firm's products were also known as Allons. The bulk of production consisted of the 293cc (2¾hp) Allon two-stroke. Introduced shortly before the outbreak of WWI, the Allon was one of the first British machines to feature a sloping top tube, while post-WWI versions were among the earliest to adopt saddle tanks. Prior to the Allon's introduction, the firm also offered the 'Matchless', a lightweight powered by a 269cc Villiers two-stroke engine; single-gear, direct-drive and two-speed versions were available.This magnificent Alldays Allon motorcycle combination is powered by the company's own 548cc air-cooled twin-cylinder two-stroke engine, which drives via a Sturmey Archer countershaft gearbox with chain primary and belt final drive. 'The new power unit is set across the frame and, although at first sight it might appear that this would add uncomfortably to the width of the machine, in practice it is found that the engine is very little wider than most of those designed for sidecar work,' observed Motor Cycling. Typical of the time, the brakes consist of a dummy belt-rim type at the front and an externally contracting band at the rear. Other noteworthy features of this particular machine include Binks carburettors; P&H acetylene lighting; Cowie speedometer; Lucas 'King of the Road' horn; and a single-seater sidecar of Alldays' own make. An older restoration, the machine is offered with some photocopied in-period literature. There is no registration document with this Lot. The machine's mechanical condition is not known; accordingly, prospective purchasers must satisfy themselves with regard to its condition, completeness, correctness, or otherwise prior to bidding.For further information on this lot please visit Bonhams.com

Lot 722

Offered from the National Motorcycle Museum Collection 1925 SEAL 980cc Family Motorcycle CombinationRegistration no. MB 9768 (see text)Frame no. 780Engine no. KTC/E 2859 (see text)•Unusual motorcycle/car hybrid•JAP v-twin engine•One of only two known survivors'The first of its kind and still miles ahead. The comforts of a car at the cost of a motorcycle combination.' – Seal Motors Limited.The SEAL (the initials stand for 'Sociable Economical And Light') was produced by Seal Motors Ltd in Hulme, Manchester. Seal's clever idea was to place the combination's controls, including the car-type steering wheel, in the sidecar, the unoccupied motorcycle being used solely to provide motor power and two of the three wheels. The chassis was an integral design rather than the separate bolted-together arrangement of the traditional motorcycle and sidecar combination, and thus a good deal more efficient, while a detachable sheet-steel fairing kept the engine and gearbox free of dirt. Early models had tiller steering and were powered by a 770cc JAP v-twin engine with belt final drive and a Sturmey Archer hub gear, while later models, such as that offered here, featured a 980cc JAP, a three-speed countershaft gearbox and chain final drive. Two-, three- and four-seater versions were made. Capable of accommodating two adults and a couple of small children, the cosy SEAL Family model was certainly sociable and at around 5cwt was light for a four-seater vehicle. Contemporary advertising claimed that the SEAL was the cheapest family model on the road, offering fuel consumption of 50-60 miles per gallon and road tax of £4 per year. 'Who would ride on a saddle exposed to all weather and road mud? No one, only those who do not know the Seal,' declared its proud maker. Unfortunately, the SEAL was not a cheap buy when compared to the opposition, which included 'proper' light cars like the immensely popular Austin Seven Chummy. How many were made is not known.The SEAL offered here is one of only two known to survive and is pictured in The Beaulieu Encyclopedia of the Automobile (Volume 3, page 1429). The machine is offered with an old-style continuation logbook (issued 1946); assorted correspondence; and some photocopied in-period literature. The logbook shows that the vehicle was previously fitted with a different JAP engine (the current engine dates from 1922). It should be noted that the registration 'MB 9768' has lapsed and is not recorded in the HPI database; accordingly, prospective purchasers should satisfy themselves with regard to this vehicle's registration status prior to bidding. The machine's mechanical condition is not known; accordingly, prospective purchasers must satisfy themselves with regard to its condition, completeness, correctness, or otherwise prior to bidding.For further information on this lot please visit Bonhams.com

Lot 726

Offered from the National Motorcycle Museum Collection 1905 Rex 8hp TricarRegistration no. EL 3480Frame no. 10221Engine no. A52•Early tricar from one of Britain's premier makes•Acquired by the NMM in 2001•An older restoration'In 1903 a motorcycle-based tricar was made, becoming more car-like in 1904 when it was called the Rexette. This had a seat for the driver instead of a saddle, a water-cooled single-cylinder engine and a 2-speed gearbox. In 1905 it became even more car-like, with a steering wheel and brakes on all three wheels.' – The Beaulieu Encyclopedia of the Automobile, Volume 3.An innovative marque from the time of its inception in 1899 as a motor manufacturer, Rex demonstrated its first motorcycle in 1900 while continuing to make automobiles and tricars. The Coventry-based firm was soon active in all types of motorcycle competition, including the inaugural 1907 Isle of Man TT where Billy Heaton's sprung-fork Rex finished 2nd in the twin-cylinder class. Prior to that Rex had exploited the valuable publicity that accrued from the popular long-distance events of the day, in particular the famous Lands End to John O'Groats journey between the most southerly and northerly parts of mainland Britain. Brothers Billy and Harold Williamson were in charge of Rex at this time, as managing and sales directors respectively, and it was the latter who in 1904 established a new record for this 880-mile marathon, which in those days involved travel over rough, un-surfaced and often treacherous roads. Riding a 3¼hp (approximately 380cc) Rex, Williamson took 48 hours 36 minutes, which included lengthy stops to repair punctures, beating the existing mark by 2½ hours. Rex continued manufacturing its own power units until the early 1920s, after which proprietary engines became the norm. By this time neighbours Coventry Acme had been taken over and in the next few years the ranges were rationalised, the 'Rex-Acme' name being adopted in 1921. In 1923 the firm signed rising star Walter Handley, a move that would set Rex-Acme on the road to racing success in Grands Prix and at the Isle of Man TT. With some justification the firm incorporated the 'Three Legs of Man' into its tank badge. Handley's 1927 Senior win was to prove Rex-Acme's swansong TT victory, for despite all its racetrack successes the firm became a casualty of the Depression, and although there was a brief revival was gone for good by 1933. Dating from the firm's Edwardian heyday, this 1905 Rexette Tricar is powered by a water-cooled v-twin engine and features Lucas 'King of the Road' lighting. An older restoration, the vehicle was acquired by the NMM in January 2001 and is offered with an old-style V5C document. The machine's mechanical condition is not known; accordingly, prospective purchasers must satisfy themselves with regard to its condition, completeness, correctness, or otherwise prior to bidding.For further information on this lot please visit Bonhams.com

Lot 728

c.1923 Warrick Motor CarrierRegistration no. LW 8899 (see text)Frame no. 1299Engine no. 4 57•Rare commercial motorised tricycle•On museum display for many years•Offered for re-commissioning/restorationThe Warrick Motor Carrier was built by the John Warrick Cycle Company of Reading, Berkshire. Apprenticed to a gunsmith, John Warrick became a successful gun-maker himself before acquiring an agency for T W Pitt's Monarch Carrier, a tradesman's box tricycle. By 1910 Warrick's business was devoted exclusively to the manufacture of trade bicycles and tricycles. When the motorised Auto-Carrier came on the market in 1907, Warrick had no option but to respond to the obvious threat. His first move was to purchase an Auto-Carrier and have it disassembled...The three-wheeled Warrick Motor Carrier delivery van closely followed the design adopted by Auto-Carriers Ltd (later AC Cars) but with detail differences to avoid patent infringement. Like the AC, the Warrick employed a rear-mounted engine (located beneath the driver's seat), a two-speed epicyclic gearbox, chain final drive, and tiller steering. Numerous improvements were made to the design over the next two decades, including better location for the rear wheel; a switch from wood to pressed steel for the chassis frame; and the options of front wheel brakes and a reverse gear. Production ceased in the mid-1920s, though a few were assembled from stocks of existing parts, the last in 1931.This particular Motor Carrier is painted in the green and black livery of the London-based department store Debenhams, who used these Warrick vans in the 1920s. In September 1998, 'LW 8899' was sold at Brooks' auction at the National Motor Museum, Beaulieu (Lot 672). The catalogue description stated that 'We are informed that this Warrick has an air-cooled 723cc single-cylinder engine and the desirable convenience of a reverse gear,' continuing: 'the lengthy period spent in museum storage means that the car will require careful re-commissioning prior to serious use'. Unfortunately, the museum in question was not identified, but more recently it has been suggested that it was in the Isle of Man. It is understood that the purchaser at the Brooks sale was Debenhams, whose recent closure has resulted in the Motor Carrier being offered for sale today. We are further advised that 'LW 8899' was displayed in the Debenhams store in Guildford for many years. As in 1998, the vehicle will require careful re-commissioning, or possibly more extensive restoration, before further use. It is known that the two cooling fans are missing; accordingly, prospective purchasers must satisfy themselves with regard to this vehicle's originality, completeness and correctness prior to bidding. There are no documents with this Lot. The vehicle registration number has since lapsed from the HPI/DVLA database. Accordingly prospective bidders must satisfy themselves as to the VRN validity prior to bidding. For further information on this lot please visit Bonhams.com

Lot 733

Property of a deceased's estate 1937 Matchless 982cc Model X ProjectRegistration no. DXC 475Frame no. 615Engine no. 37/X 5103Founded by the Collier family in Plumstead, South London, Matchless built its first motorcycle in 1902. Matchless offered v-twin sidecar tugs from its earliest days and from 1914 concentrating exclusively on this type of machine. Production of these MAG-engined models resumed after WWI and continued into the 1920s despite the presence of a more modern Matchless-engined rival in the range. Designated 'X/2' on its launch in 1925, this 982cc sidevalve v-twin would remain in production until the outbreak of WW2, its engine being supplied to Brough Superior for use in the SS80 from 1935 onwards. While lesser models came and went, the stately Model X remained a fixture of the range, progressively updated, until 1940. The most significant upgrades along the way were introduced for 1937 when the Model X adopted a shorter frame, restyled fuel tank, and front-mounted magneto. Offered as a dismantled, part-restored project, this Model X belonged to the lady vendor's late father for almost 50 years; sadly, he passed away before he could complete its restoration, which has been professionally undertaken to a high standard. We are advised the engine and gearbox have been rebuilt; and the fuel tank, toolbox, wheels, speedometer, exhaust silences/pipes and handlebars are restored. Accompanying paperwork consists of old/current V5/V5C documents. Prospective purchasers should satisfy themselves with regard to this Lot's completeness or otherwise prior to bidding.For further information on this lot please visit Bonhams.com

Lot 738

c.1928 Rex-Acme 350cc TT SportsRegistration no. not registeredFrame no. 40322Engine no. CP 378•Vintage-era sports roadster from one of Britain's premier makes•Blackburne OHV engine•Restored to concours condition in 2020An innovative marque from the time of its inception in 1899 as a motor manufacturer, Rex demonstrated its first motorcycle in 1900 while continuing to make automobiles and tricars. The Coventry-based firm was soon active in all types of motorcycle competition, including the inaugural 1907 Isle of Man TT where Billy Heaton's sprung-fork Rex finished 2nd in the twin-cylinder class. Prior to that Rex had exploited the valuable publicity that accrued from the popular long-distance events of the day, in particular the famous Land's End to John O'Groats journey between the most southerly and northerly parts of mainland Britain. Brothers Billy and Harold Williamson were in charge of Rex at this time, as managing and sales directors respectively, and it was the latter who in 1904 established a new record for this 880-mile marathon, which in those days involved travel over rough, un-surfaced and often treacherous roads. Riding a 3¼hp (approximately 380cc) Rex, Williamson took 48 hours 36 minutes, which included lengthy stops to repair punctures, beating the existing mark by 2½ hours. Rex continued manufacturing its own power units until the early 1920s, after which proprietary engines became the norm. By this time neighbours Coventry Acme had been taken over and in the next few years the ranges were rationalised, the 'Rex-Acme' name being adopted in 1921. In 1923 the firm signed rising star Walter Handley, a move that would set Rex-Acme on the road to racing success in Grands Prix and at the Isle of Man TT. With some justification the firm incorporated the 'Three Legs of Man' into its tank badge. Handley's 1927 Senior win was to prove Rex-Acme's swansong TT victory, for despite all its racetrack successes the firm became a casualty of the Depression, and although there was a brief revival was gone for good by 1933. This Blackburne-engined Rex-Acme TT Sports was completely restored in 2020 by the current vendor. The machine had had various owners prior to purchase and was largely complete and in sound condition when found. Works undertaken included rebuilding the engine, gearbox and running gear, and nickel plating the brightwork; the result being a machine worthy of exhibition at any Concours d'Élégance. We are advised by the vendor that the Rex starts readily and is a delight to ride; indeed, he last rode it in May of this year. A full photographic record of the restoration, including 'before' and 'after' images, is offered with machine. Footnotes:This Lot is subject to VAT on imported items at 5% on Hammer Price and Buyer's Premium, payable by the Buyer.This lot is subject to a fee of £125 + VAT payable by the Buyer, to undertake the relevant NOVA and C88 (Customs) clearance applications. Please see the Conditions of Sale for further information. Lot to be sold without reserve.This lot is subject to the following lot symbols: ** VAT on imported items at a preferential rate of 5% on Hammer Price and the prevailing rate on Buyer's Premium.For further information on this lot please visit Bonhams.com

Lot 739

The property of Ewan Cameron Brough Superior SS100 1,000cc Supercharged Special Re-creationRegistration no. not registeredFrame no. (see text)Engine no. JTOS/O 62502/S•Built as an homage to Noel Pope's Brooklands solo lap record-holding Brough•Correct extended frame•Centric supercharger•JAP 8/80 Racing engine from 1938•Sturmey Archer Super Heavy Weight gearboxThis amazing machine has been built by master craftsman and engineer Ewan Cameron, whose objective was to recreate Noel Pope's Brough Superior that set the outright motorcycle lap record of 124.51mph at Brooklands 82 years ago this very same sale weekend. Incorporating many original Brough parts, this stunning machine is a formidable re-creation: running on 105-octane fuel and lubricated by Castrol R, it delivers the same power, noise and smell as the original did 80 years ago. Brough Superior devotee Ewan Cameron will be familiar to many enthusiasts as proprietor of JAP specialists, Cameron Engineering. Ewan's Brough Superior obsession began when his father Tim Cameron sat him on the fuel tank of his 1926 Brough Superior SSl00 racer: 'My very earliest childhood memory is us shooting off up the road at high speed, with noise and smells that have guided my life ever since.' The Brough was sold but R H Clark's book The Rolls-Royce of Motorcycles remained on the bookshelf, and Ewan kept returning to the section recounting how Noel Pope, riding a supercharged Brough Superior, set the solo motorcycle lap record at Brooklands on 4th July 1939 at an average speed of 124.51mph, a mark that would stand for all time. His dream was developing. In 1987, aged 17, he bought the very first parts for the project: the Brooklands Can silencers. Over the years other period-correct parts were found and fully rebuilt. These included a rare Sturmey Archer 3 speed super heavy weight racing gearbox (originally fitted to another 1928 SS100); Castle forks (repaired and re-tubed by Jake Robbins); and a 1,000cc JAP 8/80 v-twin racing engine that was once fitted to the Trimax Formula 2 racing car built by Spike Rhiando. This 1938 engine is an early version of the ultimate racing JAP, complete with correct early-specification rocker boxes; rebuilt, pressed-up crankshaft; racing con-rods and pistons; BTH magnetos; and a total-loss Pilgrim oil pump. Running on 105-octane race fuel and lubricated by Castrol R oil, the engine is fed by a pre-war Centric 260 vane-type supercharger, taken from the Farley-JAP Shelsley special racing car. The fuel tank is from a 1924/1925 Brough Superior SS80, and all other cycle parts period correct, the rear hub, foot brake and throttle being original Brough. In 2010 a chance conversation brought the remains of an SS100 to Ewan's attention. He was there the next day, pulling out the rusty components from the bottom of the owner's garden. A deal was done and Ewan then proceeded to rebuild the Brough in its current 'Pope Brooklands' form using a new-old-stock headstock obtained from Brough Superior's then owner, Alec Card. Ewan tells us that the completed machine is mechanically perfect, running beautifully, and has been ridden to the pub! The Brough and its new owner are invited to this year's inaugural Kilometre Lance Speedrace in September, which is an event additional to the famous Bernina Gran Turismo in St Moritz. Thousands of hours brought one of the most iconic racing bikes back to life that has ever existed.NB: Although its headstock is stamped '963S', this motorcycle should not be confused with the 1928 Brough Superior SS100 '963', which is recognised by the Brough Club and resides in Argentina. For further information on this lot please visit Bonhams.com

Lot 741

The property of Ewan Cameron c.1953 Phoenix-JAP 497cc Racing MotorcycleRegistration no. not registeredFrame no. TT53Engine no. JORZ/H/75745/1•Built by Ernie Barrett in the early 1950s•Ultra-rare JAP racing engine•Restored and modified by Ewan Cameron'Keen observers came across an unusual machine entered for the Oliver's Mount road race meeting at Scarborough in September when amongst the 500s was an experimental 500cc single cylinder racing JAP engine mounted in the frame of a 'featherbed' Norton. Of 80x99mm dimensions, giving a cubic capacity of 497cc, it had a light alloy cylinder head, an Alfin cylinder barrel and dry sump lubrication. The rider was E. A. Barrett, of South Tottenham.' – Jef Clew, JAP – The End of an Era.The machine offered here is one of a small series of racing motorcycles built in the early 1950s by established Isle of Man TT and short-circuit competitor, E A 'Ernie' Barrett. Ernie lived in Tottenham, North London, not far from the J A Prestwich factory, so the choice of JAP engines for his Phoenix racers was a logical one. Barrett used a frame of his own design and built machines for the 250, 350, and 500cc categories. It is not known how many were produced, but Ernie successfully rode a 250cc version to 12th place in the 1953 Isle of Man Lightweight TT. He also contested the Junior and Senior TTs in 1953 riding Phoenix-JAP machines but failed to finish in either race. Barrett's 500 Phoenix is believed to be the last single-cylinder JAP-engined machine to race in period at the IoM TT. As well as Jeff Clew's book, the Barrett Phoenix is also featured in Motor Cycling magazine's editions of 25th September 1952 and 2nd April 1953; in Excelsior and its Racing Rivals by Paul Ingham; and in the Keig Collection Volume 5. Driving via an AMC gearbox, the engine is inclined forwards in the Featherbed-style chassis, which features an Earles-Type leading-link front fork and swinging-arm rear suspension. The engine number decodes as a 497cc overhead-valve racing unit with dry sump lubrication, dating from 1951. JAP's model year began on 1st September of the preceding year and ended on 31st August, so this engine was built between 1st September 1950 and 31st August 1951. Although not original to the frame, but of the correct type, this engine is of some historical importance: it is stamped 'S.MOSS' to the drive-side crankcase, indicating that it had been supplied to or used by the late Sir Stirling Moss, most likely in a Formula 3 Cooper. Only some five or six of these engines are known to survive worldwide, and Ewan Cameron purchased this one around 25-30 years ago from sprinting legend, Ernie Woods. The frame and the Earles-type front fork came from Sid King, while the engine was only installed five years ago. Ewan restored the Phoenix-JAP himself, making the tank and seat and carrying out other modifications, which included inclining the engine in the frame (the original swinging arm, clutch and Albion gearbox are included in the sale). The project took some ten years to complete and was finished around 18 months ago. For further information on this lot please visit Bonhams.com

Lot 744

1937 Norton 490cc Model 30 InternationalRegistration no. 169 XUKFrame no. 80556 Forks No. 38754Engine no. 76069•Impeccable example of Norton's sports model•Rare fully matching numbers of engine, frame, gearbox, and forks.•Engine, gearbox and clutch rebuilt by specialist Stuart Rogers•Dating certificates from Norton Owners Club and Roy Bacon•Comprehensive record of restoration work doneThe Arthur Carroll designed overhead camshaft 'International' was the cream of the Norton company's crop from its introduction in 1931, both as a very rapid sports model and its development as a racing machine. The factory team were almost unbeatable in the 500c class in international racing through the 30s, and a glance at any racing photograph from that era will show the close likeness to the road going version until rear suspension arrived on the factory racing machines in 1937. But that single cylinder engine remained a formidable upholder of the British racing reputation until development of supercharged BMW twins and Gilera fours could outpace them as the decade drew to a close and Europe entered into a conflict that stopped racing. This outstanding period correct example of the breed was despatched from Birmingham in June 1937 to Keep Brothers of Capitol, South Africa and remained there until re-imported to the UK in April 2008. Purchased by the vendor in April 2011, it has been the subject of a complete restoration to concours standard, including an engine rebuild by the renowned Stuart Rogers and much other work by him, including an O-ring added to the kickstart shaft to prevent oil leaks that are a characteristic of the model of this period. Comprehensive details of restoration work done and bills in support are part of the accompanying records, along with a copy of the South African registration and dating certificates from both the Norton Owners MCC and author the late Roy Bacon. Searching for and fitting correct period parts such as the Andre damper, an Altette horn and a Dunlop saddle have been part of the vendor's patient development of the motorcycle to its current very high standard.The Norton wears a new silencer, and the original is part of the spares package that comes with the sale, as is the correct Amal TT carburettor while the Concentric type currently in place gives a more flexible performance. This is typical of the vendor's thorough approach that is reflected throughout the machine. It has covered only 500 miles since the work was finished and is ready to serve its new owner well as an exciting road machine, an impressive track day classic specimen or to simply grace a home where such quality and history is appreciated.For further information on this lot please visit Bonhams.com

Lot 745

c.1947 Norton 348cc 'Manx' Competition SpecialRegistration no. not registeredFrame no. 10427Engine no. B10M 11831•Built by the lady vendor's husband in the mid-1960s•Winner of the National Sprint Association's 350cc class Hill Climb Championship trophy in 1968•Offered from long-term storage•Requires re-commissioningDubbed 'Manx Grand Prix' in 1939, what would become the best-known racing motorcycle of all time had become simply 'Manx' when production resumed in 1946. Norton's over-the-counter Manx racers were much the same as their pre-war counterparts, with single-overhead-camshaft engine, 'square' cylinder head finning, upright gearbox and plunger-suspended 'garden gate' frames. Only the presence of the Roadholder telescopic front fork readily distinguished them from the '39 machines. 1949 brought the first significant change in engine specification, the Manx gaining a double-overhead-camshaft cylinder head like that enjoyed by the works bikes for many years, but the major development was the arrival of the Featherbed frame for 1951. The works' adoption of the McCandless-designed duplex-loop swinging-arm chassis the previous year had given the Nortons a new lease of life in Grand Prix racing, and Geoff Duke duly took both the 350 and 500cc world titles in 1951. The cycle parts remained essentially unchanged from then on apart from the adoption of a double-sided, twin-leading-shoe front brake for 1962. Manx engine development though, continued steadily, latterly under Doug Hele's direction, until production ceased at the end of '62, among the most significant design changes being the adoption of 'square' bore and stroke dimensions for 1954 and coarser-pitch bevel teeth in 1957.This handsome Norton competition 'special' was built in the mid-1960s for hill climbs and sprints by the lady vendor's husband, a regular competitor in such events in his native West Country and further afield. It consists of a Norton Model 18 rigid frame dating from June 1947 and a 350cc Manx engine from August of that year, the latter fitted with the later 'double knocker' cylinder head. Other noteworthy features include Morad 19' flanged alloy wheel rims; an Amal 10TT9 carburettor; and a Smiths 8,000rpm tachometer. This motorcycle has obviously been built with great attention to detail and with speed in mind, the result being a most stylish British classic. It was ridden by its owner with some success too, winning the National Sprint Association's 350cc class Hill Climb Championship trophy in 1968 (see copy photographs on file). The machine will require re-commissioning after a period of storage and thus is sold strictly as viewed. There is no paperwork with this Lot. For further information on this lot please visit Bonhams.com

Lot 746

c.1952 Norton 490cc 'International' Competition Special (See Text)Registration no. not registeredFrame no. G44367Engine no. 86720Norton first applied the name 'International' to its overhead-camshaft model in 1932. A 'racer for the road', the top-of-the-range Inter was based on the works machines but could be ordered with refinements such as lights and a kick-start-equipped gearbox. By the time production halted in 1939, the Inter was being built with a four-speed foot-change gearbox and plunger rear suspension, reappearing after the war in similar guise save for the adoption of the hydraulically-damped Roadholder front fork which replaced the pre-war girder. The model received Norton's race-developed Featherbed frame for 1953 together with an alloy cylinder barrel/head and the new 'laid down' gearbox. Expensive to make and challenged by cheaper parallel twins of comparable performance, the Inter ceased to be catalogued after 1955 but could still be obtained to special order until 1958. This handsome Norton was built in the 1970s as a competition 'special' by the lady vendor's husband, a successful sprint and hill climb competitor. It consists of a 'Garden Gate' plunger frame dating from 1952 and a 1960 International Model 30 engine. This motorcycle has obviously been built with great attention to detail and with speed in mind, the result being a most stylish British classic. The machine will require re-commissioning after a period of storage and thus is sold strictly as viewed. There is no paperwork with this Lot. For further information on this lot please visit Bonhams.com

Lot 747

1937 Norton 490cc Model 18Registration no. GME 342Frame no. 81501Engine no. 79065Newly introduced for 1923, Norton's Model 18 overhead-valve sports roadster retained its essentially Vintage characteristics until 1931 when the range was extensively redesigned, dry-sump lubrication and rear-mounted magneto being standardised, the most obvious external alteration in its appearance before then being the 'saddle' tank adopted for 1929. Numerous improvements were made to the engine throughout the 1930s, including enclosure of the valve gear, while Norton's own four-speed foot-change gearbox replaced the old Sturmey Archer in 1935. This Model 18 was acquired by the vendor from the original owner in 1988 and subsequently restored by Brian Kettle between November 1996 and August 1997. Used sparingly and always stored in a dry garage, 'GME 942' is presented in very good condition throughout and is a very useable 'older restoration' machine, having recently benefited from a magneto rewind. Last run in April 2021, the machine is offered with a most substantial history file (inspection recommended), the contents of which include a selection of photographs; instruction manuals; a dating letter; sundry bills; DVLA correspondence; and old/current V5/V5C documents. It also comes with an award for 'Pre-1945 Single – Runner Up', presented by Geoff Duke OBE at the VMCC's Norton Day in June 1998. For further information on this lot please visit Bonhams.com

Lot 750

1953 Vincent 499cc Series-C CometRegistration no. RUA 388Frame no. RC/1/11537/B Rear Frame no. RC/1/11537/BEngine no. F5AB/2A/9637 Crankcase Mating no. 38MM/38MM•Matching frame and engine•Present family ownership since the late 1960s•Not ridden since the late 1970s•Original throughoutUnlike in pre-war days, when the first (Series-A) Vincent-HRD v-twin had been created by - in effect - combining two of the existing singles, post-WW2 Vincent's approach was reversed, with the Series-B twin appearing first, in 1946, and the single-cylinder version in 1948. The latter was offered in two forms initially: Series-B Meteor and Series-C Comet. Apart from its Burman gearbox and 'missing' cylinder, the Comet followed Series-C twin lines, featuring the newly introduced Girdraulic front fork and hydraulic dampers at front and rear, while the Meteor retained the old Brampton girders. The Meteor was soon dropped but the Comet continued in production until 1954, offering the same degree of refinement as its bigger brother, albeit with reduced performance. Even so, the Comet combined a 90mph potential with excellent fuel economy, and was the ideal touring mount for the discerning rider who placed civility of manners and quality of construction above outright performance. An expensive machine to produce, the Comet did not sell as well as its maker had hoped and was dropped when the Series-D range was introduced. This matching numbers (frame and engine) Comet was manufactured in March 1953. The vendor acquired the machine from his uncle, a former technician at the Granada Television studios (now ITV) who rode it to and from work. The Vincent would sometimes be used for shows or photo shoots, and 'RUA 388' comes with a photograph of model Ebbie Haggarty draped across it, taken outside the Granada studios. Back then, Ebbie was linked with George Best, and was pictured on the front page of the Daily Mirror on 13th January 1971 kissing Manchester United's star player (see press cutting on file). Original and in un-restored condition throughout, the Comet has not been ridden since the late 1970s and has never been started while in the vendor's possession. Frame and engine numbers are matching, and the machine has not been modified. The Comet's mechanical condition is not known; accordingly, prospective purchasers must satisfy themselves with regard to its condition, completeness, correctness, or otherwise prior to bidding. Accompanying documentation consists of a V5C Registration Certificate; an old-style logbook (issued 1964); and six expired MoTs from the 1970s. Also included in the sale are a headlight and rim; filters x2; Terry's valve springs; drive chain; battery; rider's handbook; and a rear-view mirror.For further information on this lot please visit Bonhams.com

Lot 752

1947 Vincent-HRD 998cc Series-B Rapide Registration no. HDV 949Frame no. R2242 Rear Frame No. R2016 (see text)Engine no. F10AB/1/243 Crankcase Mating no. C43/C43•Present family ownership since the late 1970s•Original and un-restored•Last used in 2011When Vincent resumed production at the war's end it was with the all-new Series B. Its rear suspension aside, the pre-war Series A Vincent-HRD had been conventional enough: tubular steel frame, girder forks, separate gearbox, etc but with the Series B Messrs Vincent and Irving effectively established the marque's reputation for the defiance of convention in the pursuit of engineering excellence. For a start there was no 'frame' as such, merely a fabricated box attached to the cylinder heads, that served as the oil tank and incorporated the headstock and the attachment point for the rear springs. The gearbox was integral with the engine, and the swinging arm pivoted directly in the engine/gearbox casings, features commonplace today but unusual 60 years ago. Only in his retention of the pre-war Brampton girder fork did Phillip Vincent appear to be lagging behind other manufacturers, almost all of which had switched to telescopics, but this apparent shortcoming would soon be addressed by the introduction of the famous 'Girdraulic' fork.Introduced in 1946, the Vincent-HRD Rapide Series B was immediately the fastest production motorcycle on sale anywhere, with a top speed of 110mph. The basic design clearly had even greater potential though, which would be realised later in the form of the Black Shadow and Black Lightning models. This Series B Rapide was despatched new in September 1947 to J E Green & Co of Newton Abbot and registered in their name as 'HDV 949'. An early example, it has that model's characteristic Brampton girder forks; HRD-embossed timing cover with prominent cast-in oil ways; and imposing 8' Miller headlamp similar to that used on Series A Vincents. This machine also features the all-black brakes, confirming that it was built prior to the introduction of the spun-aluminium water excluding rings. 'HDV 949' has been in the same family's possession since the late 1970s and is presented in original and un-restored condition. We are advised by the vendor that the last work was carried out in 2008/2009 when the magneto was refurbished; the Amal carburettors overhauled; and a new clutch plate/springs and new throttle cable fitted. Last used in 2011, the Rapide has not been started recently but the engine has been turned over regularly. Accompanying documentation consists of original and continuation old-style buff logbooks; a current V5C Registration Certificate; and a VOC Dating Certificate. (It should be noted that the rear frame, although of the correct Series B type, is not original to this machine.)For further information on this lot please visit Bonhams.com

Lot 754

1954 AJS 349cc 7R Racing MotorcycleFrame no. not visibleEngine no. ANDERSON AJS 1•Purchased new by AJS works rider Rod Coleman for his brother Bob•Acquired by previous owner Colin Grant in 1990 and used only for the annual Isle of Man TT Parade Lap•Formerly part of the National Motorcycle Museum CollectionBuilt from 1948 to 1963, Associated Motor Cycles' AJS 7R - known as the 'Boy Racer' - was one of the most successful over-the-counter racing motorcycles of all time. Almost all Britain's road-race stars of the 1950s and 1960s rode a 7R at some stage of their careers, and the model remains a major force in classic racing today. Although a new design by Phil Walker, the 7R with its chain-driven overhead-camshaft was very reminiscent of the AJS 'cammy' singles of pre-war days. While - initially - not as powerful as the Velocette KTT and Junior Manx Norton, the 7R's robust and simple construction endeared it to the privateer responsible for his own maintenance. While the duplex loop frame and Teledraulic front fork remained essentially unchanged throughout production, the engine underwent almost continuous revision: the valve angle being progressively narrowed, the crankshaft made stronger and, in 1956, engine dimensions changed from the original long-stroke 74x81mm to the 'squarer' 75.5x78mm that permitted a higher rev limit. AMC's own gearbox replaced the previous Burman in 1958, while engine development continued almost to the end of production, by which time the 7R was putting out around 41bhp. According to correspondence on file, the 7R offered here was purchased new by AJS works rider Rod Coleman for his brother Bob to ride. It later passed to another New Zealander, John Anderson, who was a regular podium finisher in NZ national events. Anderson entered the Isle of Man TT races in 1957 and 1958, riding a 7R in the Junior events and a Norton in the Senior, with a best result of 6th in the 1958 Senior race. However, it is not known if this 7R was the one used by him in the Isle of Man. Previous owner Colin Grant acquired the AJS in 1990 and used it only for the annual Isle of Man TT Parade lap. He sold the 7R to the National Motorcycle Museum in June 2004 (receipt on file). The current vendor purchased the AJS at Bonhams' Winter Motorcycle Sale in December 2020 when the NMM sold some of its reserve collection. He intended to keep the 7R on display in his new house; unfortunately, his wife had other ideas and so it is reluctantly offered for sale. The machine's mechanical condition is not known; accordingly, prospective purchasers must satisfy themselves with regard to its condition, completeness, correctness, or otherwise prior to bidding.For further information on this lot please visit Bonhams.com

Lot 757

1936 Rudge 499cc SpecialRegistration no. JT 4918Frame no. 55928Engine no. 5005The full potential of Rudge's four-valves-per-cylinder design – introduced in 1924 - was slow to emerge but in 1928 Graham Walker's works 500 became the first motorcycle to win a road race - the Ulster Grand Prix - at an average speed in excess of 80mph, a feat which led to the introduction of the legendary 'Ulster' model. A variety of valve arrangements was tried across a range of 250, 350 and 500cc models, and by the mid-1930s had stabilised: the 500 Special employing a parallel layout and the Ulster a parallel/semi-radial combination. It should be noted that despite its name the Special was the touring 500, the Ulster being the sports version. Landmark developments included the enclosure of the valve-gear for 1937 and the switching of the gearchange lever from the left-hand to the right-hand side of the gearbox. A compact machine with a willing engine and powerful linked brakes, the 500 Special is a delight to ride and copes easily with present-day traffic conditions. Supplied by Huxhams of Bournemouth, this particular Rudge Special was acquired in the 1950s and ridden throughout that decade. Unused for many years, it is an older restoration that has acquired a nice patina of age. Re-commissioning and the customary safety checks will be required before returning the Rudge to the road. Accompanying documentation consists of an old-style continuation logbook (issued 1975) and a V5C document. For further information on this lot please visit Bonhams.com

Lot 761

1959 BSA 496cc Gold Star Special Registration no. SRV 610Frame no. FB31 2880Engine no. BB34 GS 96 (see text)The vendor, a world authority on BSA M24s, bought this Goldie Special in 2008. It was then dismantled and rebuilt in café racer trim. He reports that it is light, quick, and fun to ride, and that it has been used mainly as a track/parade bike. The major components are a 1959 BSA B31 frame, c.1953 believed BSA BB34GS crankcases (the engine no. is not original), RRT2 gearbox, 1939 BSA M24 crankshaft, barrel, head, & rocker box, 18' alloy rims, modern BTH electronic magneto, 10TT9 carb, 4-gallon Lyta petrol tank, single racing seat. It is road legal without lights, and is accompanied by a V5C, old style logbook, and various bills. Offered for sale only because of the vendor's ongoing health problems, light recommissioning is recommended following a period of inactivity. Prospective bidders should satisfy themselves as to the motorcycle's completeness and mechanical condition.For further information on this lot please visit Bonhams.com

Lot 762

1971 BSA 740cc Rocket 3 MARK II 5-speed Registration no. HUK 107JFrame no. PE00256A75RVEngine no. PE00256A75RVThis BSA Rocket 3 is one of only 200 built with a five-speed gearbox. The vendor, a time served BSA enthusiast and the long-term owner of another earlier Rocket 3, acquired this one in April 2014 following its restoration in 2012-13. He rates the frame, cycle parts, engine, and transmission as 'excellent'. It is believed to have been re-imported from the USA in 2012 and was first registered in the UK in November 2013. In the vendor's own words: 'Early in 1971 BSA set about building a batch of 200 Mk.2 Rocket 3s with 5-speed gearboxes for production racing homologation reasons. For the first batch of these, they used some surplus 4-speed A75R engines built and stamped in November 1970, which were converted to 5-speed with gear clusters made by Quaife. These carry the PE dating letters before the number, followed by A75R, to which they added a V to indicate the 5-speed gearbox. My bike is PE00256A75RV, and the frames were stamped to match the engine. The next batches of 5-speed engines were stamped when built, and these had the dating letters for when they were built, followed by A75V suffix without the R.' The Rocket 3 is offered for sale only because of the vendor's ongoing health problems. It has seen little use since 2018 and following this period of inactivity light recommissioning is recommended. Documents include a V5C, MOT certificates, and a few recent invoices. Prospective bidders should satisfy themselves as to the motorcycle's completeness and mechanical condition.For further information on this lot please visit Bonhams.com

Lot 769

Property of a deceased's estate 1961 Triumph 349cc 3TARegistration no. 757 BAXFrame no. not visibleEngine no. 3TA H23318Triumph re-entered the 350 class in 1957 with the introduction of the Twenty One. Its arrival ushered in Triumph's unitary construction era, which saw the engine and gearbox, previously separate components, combined within a single structure, albeit one that retained a vertically split crankcase assembly. Readily distinguishable by its Shell Blue metallic finish and 'bathtub' rear enclosure - a feature later applied to Triumph's larger models - the newcomer was renamed '3TA' in September 1958. With just 18.5bhp on tap, Triumph's smallest twin lacked the urgent acceleration of its larger brethren, but nevertheless was a capable tourer good for around 80mph while delivering excellent fuel economy. 'One of the swiftest standard British-made 350cc roadsters tested by Motor Cycling, the Triumph Twenty One combines an untiring zest for high-speed cruising with safe handling and a remarkably economical fuel consumption,' reported the 'Green 'Un'. Currently displaying a total of 49,765 miles on the odometer, the 3TA presented here is offered for restoration and sold strictly as viewed. The seat and bathtub rear enclosure are loosely attached, and the engine turns over. Accompanying documentation consists of an old-style continuation logbook (issued 1969) and an old-style V5 (issued October 1983). The machine is recorded in the HPI database. Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 774

1982 Hesketh 992cc VampireRegistration no. CPU 225XFrame no. 213Engine no. 0083Brainchild of wealthy aristocrat and Formula 1 team owner Alexander, Lord Hesketh, the Hesketh V1000 promised to be an all-new British superbike in the Vincent mould. The proposed design had all the right ingredients: 1,000cc 8-valve Weslake v-twin engine, nickel-plated Reynolds 531 frame, Brembo brakes and Astralite wheels; if only they'd got Rod Quaife to design the gearbox... Rushed into production before it was ready, the V1000 was panned by the critics - the gearbox in particular - and when the receivers pulled the plug in 1982 only 170 had been made. The sole derivative of the original V1000 was the even rarer Vampire, a super tourer equipped with fairing designed by John Mockett. Following the original company's demise, small-scale production was restarted later by successor-company Hesleydon Ltd at the Hesketh family seat at Easton Neston where, over the years, development engineer Mick Broom managed to eradicate virtually all the V1000s shortcomings. The current owner describes the machine's condition as good throughout, though with some inevitable age-related cosmetic deterioration. The Vampire last ran in 2019 and should require only minimal re-commissioning before returning to the road. Accompanying paperwork consists of a V5C Registration Certificate; MoT (expired April 2017); and the original Hesketh warranty document.For further information on this lot please visit Bonhams.com

Lot 779

1947 Douglas 348cc T35 De LuxeRegistration no. EAV 615Frame no. 1753Engine no. 1815The Bristol-based Douglas Foundry took up motorcycle production in 1907 with a machine powered by a horizontally-opposed, twin-cylinder engine, and the company would keep faith with this layout until it ceased motorcycle production in 1957. Fore-and-aft installation made for a slim machine with a low centre of gravity, and the design's virtues were soon demonstrated in competition, 2¾hp Douglas machines taking 1st, 2nd and 4th places in the 1912 Junior TT in the Isle of Man.Douglas commenced post-war production in 1947 with, naturally enough, a flat twin, though unlike the vast majority of previous models the T35 mounted its engine across the frame. The former was of unit construction, while the latter displayed even greater innovation with its swinging arm rear suspension controlled by torsion bars, and leading-link Radiadraulic front fork. Its advanced running gear endowed the Douglas with excellent handling and steering characteristics, while the willing engine, although not as quick as some 350s, could propel the 'Duggie' at up to 70mph and return 60-plus miles per gallon. The T35 was produced for little more than one season before being superseded by the updated MkIII. First registered in Scotland ('AV' is an Aberdeenshire mark), this T35 was purchased by the vendor at Bonhams' Stafford auction in April 2007 (Lot 445). The machine was restored in 2010: the gearbox being rebuilt; the magneto overhauled; the clutch relined; the wheels rebuilt with new chromed rims and stainless spokes; the seat re-covered; and a new prop stand, crash bars, luggage rack, exhaust pipe and 'waffle box' silencer fitted. Last run earlier this year and described by the private vendor as in generally excellent condition, with good engine, the machine is offered with an old-style logbook; instruction manual; parts catalogue; sundry restoration invoices; assorted MoTs and tax discs; and a V5C document, the latter incorrectly recording the frame number. Footnotes:As with all Lots in the Sale, this Lot is sold 'as is/where is' and Bidders must satisfy themselves as to the provenance, condition, age, completeness and originality prior to bidding.For further information on this lot please visit Bonhams.com

Lot 787

1958 BSA 646cc A10Registration no. not registeredFrame no. FA7 3766Engine no. DA10 2359A new '650' twin joined BSA's 500cc A7 model in 1949, the latter's engine being revised along the lines of the new design at the same time. The existing parallel twin architecture was retained for the new A10, with 360-degree crankshaft and single camshaft at the rear of the cylinder block, as was the four-speed gearbox bolted directly to the crankcase in a form of semi-unitary construction. Like the A7, the A10 was available initially with either a rigid frame or plunger rear suspension. Named 'Golden Flash', the new 650 was strikingly finished in pale beige metallic. Ever since the model's introduction enthusiasts have commonly referred to the touring A10 as the 'Golden Flash', even when it was finished in alternative colour schemes.This pristine A10 is offered for sale fresh from a 'ground upwards' restoration and has not been run since the rebuild's completion. We are advised that refurbishment carried out included a re-bore and new pistons; reground crankshaft with undersized timing-side bush; new wiring loom; rebuilt dynamo with new armature; new electrical switches, etc. It is also worthwhile noting that the original Dunlop wheel rims have been retained. All fluids should be checked before any attempt is made to start the machine. NOVA will have been completed by time of sale. Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 789

Property of a deceased's estate 1976 Honda CB200Registration no. NDF 258PFrame no. CB200-1042624Engine no. CB200E-1044936Introduced in 1973, the Honda CB200 sports roadster superseded the old CB175 and came with a tubular spine frame, twin carburettors, a five-speed gearbox, and either a drum or disc front brake. Back in 1974, Bike magazine found theirs a little slower than both the Yamaha RD200 and Suzuki GT185, though considerably more economical. 'It might not be the fastest thing around,' remarked Britain's No.1 motorcycling magazine, 'but somehow it looks and feels more like a real motorcycle than its two-stroke counterparts. It's a little bike with a big heart'. Physically smaller and lighter than Honda's contemporary 250, it must have seemed the ideal mount for lady riders and gents small in stature. Purchased new in 1976 from Peter Hammond Motorcycles of Cirencester (sales receipt on file), this CB200 has had only one owner from new and currently displays a total of 22,826 miles on the odometer. The machine was last taxed to the end of April 1989 and is offered for restoration (the engine turns over). Accompanying documentation consists of an old-style V5; expired MoT (1989); HPI check; and a 1976 owner's manual and vehicle service booklet. Sold strictly as viewed, the machine is offered with a spare fuel tank.Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 791

1974/2021 Norton 750cc Commando Production RacerRegistration no. not registeredFrame no. noneEngine no. noneThis ultimate Commando Production Racer was finished earlier this year by renowned marque specialist and former factory engineer/racer, Norman White. The machine incorporates a 1974 production frame that Norman modified to works specification by raising and off-setting the engine mounts and fitting cotter-pin strengthening to the Isolastic mounts. The wheels were built with 18' rims to give maximum choice of race rubber, and the front has Norman's twin disc brakes. The rear hub has been modified to accept Manx Norton sprockets, allowing the gearing to be changed for each circuit. Built around five years ago and originally run in a Seeley frame, the engine is based on the 1974 short-stroke works unit, with a special crankshaft and con-rods; strengthened crankcases; Steve Maney cylinder barrels; race pistons; PW3 race cam; optical race ignition system; and cylinder heads flowed to full race specification. The engine breathes via a pair of 34mm Amal smoothbore carburettors and is fitted with a large diameter high-rise race exhaust. The transmission features a five-speed gearbox with modern selection system, belt primary drive, and a diaphragm clutch. All the bodywork is from the original factory moulds held by Norman White. The engine has only a minimal mileage on its bores so is barely run-in, and the machine is described by the vendor as 'like new' throughout. It last ran in April 2021. During the build, the vendor decided to retire from racing, so the machine is now surplus to requirements.For further information on this lot please visit Bonhams.com

Lot 792

Number '8' of only 500 built 2019 CCM 600cc Spitfire BobberRegistration no. MX69 FXEFrame no. SMZHC60CP19A00619Engine no. CCM201 808066•One owner from new•Circa 900 miles from new•Factory fitted accessories/upgradesFormerly a specialist manufacturer of mainly moto-cross machinery, CCM in more recent times has reinvented itself as supplier of bespoke limited-edition motorcycles aimed at the 'hipster/custom' market. The Spitfire Bobber offered here is one such. A member of the currently nine-strong Spitfire family, its looks recall those of the cut-down 'bobber' bikes that first emerged in North America in the 1930s and 1940s. In CCM's own words: 'These were stripped back minimalist machines with all accessories removed, a 'chopped' rear and a lowered seat height making for a more compact, lighter motorcycle. It was a logical choice then to launch our own version of the Bobber, taking its underpinnings from the lean and lithe Spitfire, a bike as stripped back as a modern road legal bike can be.'The Spitfire range is powered by a 600cc water-cooled four-stroke single boasting twin overhead camshafts and fuel injection, whose 55-horsepower maximum is transmitted to the ground via a six-speed gearbox. This compact engine/transmission unit slots into a TIG-welded steel trellis frame equipped with Marzocchi USD forks and a YSS rear suspension unit, but perhaps the Bobber's most striking feature is its floating tractor-style saddle. Only 500 individually numbered Bobbers will be made, the example offered here being the eighth in the series. Number eight is considered to be a lucky number in Chinese and other Asian cultures. Sold new to the current owner in December 2019, it has covered only some 900 miles from new and is presented in commensurately good condition. Factory fitted accessories/upgrades include a second front disc brake; updated stand; Stage 1 modified ECU and battery; and billet reservoir caps. The machine also comes with a battery charger and CCM bike cover. The foregoing added around £1,000 to the circa £10,000 base price (see sales order on file). The Billet optional extras were included gratis as a goodwill gesture by CCM to compensate the owner for a delay in delivery, so there is no invoice for those (refer to the CCM web site for full price list of extras). It is understood that the two-year warranty is transferable to the next owner. Last ridden in May 2021, the machine has been used regularly, mostly for local trips, and at other times has been garaged beneath its CCM cover. The last service and warranty work was carried out in March 2020. The machine comes with a V5C registration document and its original leather wallet containing the owner's manual and service book.For further information on this lot please visit Bonhams.com

Lot 794

1928 AJS 495cc K10 with Swinging-arm ConversionRegistration no. TK 649 (see text)Frame no. to be advisedEngine no. 10/120056•Rare Vintage-era overhead-camshaft sports model•Present ownership since 1990•Offered for restorationOriginally manufacturers of proprietary engines, the Stevens brothers of Wolverhampton introduced the first AJS motorcycle in 1911. Those first AJS machines were sidevalve-engined lightweights offered with belt-drive transmission or optional all-chain drive with a two-speed countershaft gearbox. This latter feature enabled them to put up a good showing in the Isle of Man TT's new Junior Class, an event AJS would later dominate. Eric Williams scored the marque's maiden Junior TT victory in 1914, and the first post-war Junior event saw the new overhead-valve AJS in commanding form. Indeed, so good was the newcomer that Howard Davies rode it to a unique double victory the following year, winning both the Junior and Senior TTs. In 1927 AJS's works 350cc racers appeared with a new overhead-camshaft engine. The camshaft was chain driven, its distinctive cast alloy case extending forwards to the front-mounted magneto. A catalogued model from 1928, the 'cammy' AJS was built in 350 and 500cc capacities initially, dry-sump lubrication being an unusual feature of the engines, which were carried in open diamond frames. A 250cc version followed, Jimmy Guthrie winning the Lightweight TT on one in 1930. Produced for only four seasons, the AJS overhead-camshaft racers were casualties of the Matchless take-over in 1931. Purchased at a UK auction in February 1990 (invoice on file), this AJS K10 project comes with an old-style continuation logbook (1949) and a (part) old-style V5 document. However, it cannot be ascertained whether or not these documents relate to this motorcycle as the frame number has been obscured by the swinging-arm conversion. In any case, the registration 'TK 649' is not listed in the HPI database; accordingly, prospective purchasers should satisfy themselves with regard to this motorcycle's registration status prior to bidding. Overhead-camshaft racing motorcycles of the Vintage period are rare, which makes this challenging AJS K10 project an exciting prospect for the dedicated motorcycle restorer. Sold strictly as viewed.Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 795

1912 Douglas 2¾hpRegistration no. CR 6885 (see text)Frame no. 5269Engine no. 5567The Bristol-based Douglas Foundry took up motorcycle production in 1907 with a machine powered by a horizontally-opposed, twin-cylinder engine, and the company would keep faith with this layout until it ceased motorcycle production in 1957. Fore-and-aft installation made for a slim machine with a low centre of gravity, and the design's virtues were soon demonstrated in competition, 2¾hp Douglas machines taking 1st, 2nd and 4th places in the 1912 Junior TT in the Isle of Man. Douglas were quick to realise the advantages of the countershaft gearbox, its three-speed entries gaining the Team Prize in the 1914 Six Days Trial, a conspicuous success that resulted in the firm obtaining a wartime contract for the supply of military machines.This Douglas 2¾hp was restored by Doug Streeting in the 1970s. The Douglas took part in the Pioneer Run eight times and was then sold to the present owner who has completed the Pioneer Run 25 times on it, never failing to finish. The machine has not been used since 2011. Accompanying documentation includes photographs of the Douglas on the Pioneer Run; its Pioneer Certificate (no. 522); and two old MoTs. Assorted pennants and finisher's medals plus programmes and badges are included in the sale together with a spare engine (number '18021.116'). The registration 'CR 6885' is not listed in the HPI database; accordingly, prospective purchasers should satisfy themselves with regard to this motorcycle's registration status prior to bidding. Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 796

1936 BSA 249cc B2 ProjectRegistration no. FO 3086 (see text)Frame no. 4641Engine no. B2 2447During the 1930s BSA concentrated on producing a range of dependable, well-made, competitively priced motorcycles. In the decade's early years, the firm offered two B-Series machines in the 250 class: one sidevalve, the other overhead-valve. Both featured engines having vertical cylinders and magneto ignition carried in conventional cycle parts with rigid frames and girder front forks. The gearbox was a three-speed unit with hand 'change. A higher specification 'Blue Star' model was an addition for 1933, a full electrical system, originally an optional extra, became standard equipment for 1934. De Luxe versions came with the four-speed gearbox and a choice of foot or hand change. Production of the popular B-Series 250s continued to the decade's end when the range was superseded by the new C-Series quarter-litre models: the C10 and C11. Purchased in May 1981 (receipt on file), this incomplete BSA B2 is offered for restoration and sold strictly as viewed. The machine comes with an old-style buff logbook (issued 1956) and an old-style V5, both of which confirm matching numbers. The registration 'FO 3086' is listed in the HPI database; nevertheless, prospective purchasers should satisfy themselves with regard to this motorcycle's registration status prior to bidding. A spare engine, number 'HB26 368', is included in the sale. Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 8

1952 Ariel 499cc KH500 FieldmasterRegistration no. not registeredFrame no. SE384Engine no. TE723Designed by Val Page, Ariel's KH 500cc twin was produced between 1948 and 1957, starting out as the Red Hunter, becoming the Huntmaster and then the Fieldmaster, these revisions reflecting its change in role from sports roadster to tourer. At the time of its launch Ariel's new twin seemed to have a bright future. With a top speed of around 90mph, the KH was as fast as a BSA A7 or Triumph Speed Twin, and a real eye-catcher with its red-and-chrome fuel tank. A sister model, the slightly less-powerful KG Deluxe, was available in black. Although Page's design was similar in layout to that of Edward Turner's Triumph Speed Twin, using the same 63x80mm bore/stroke dimensions, it differed greatly in detail, particularly in the bottom-end arrangements. Like Triumph, the Ariel employed separate camshafts but with the pushrods at the four 'corners' of the barrel, enabling cooling air to flow unobstructed between the cylinders. A duplex chain drove the camshafts, while the transmission featured Ariel's familiar dry clutch and Burman gearbox. The KH's cycle parts had much in common with the singles': a rigid frame was standard, with Ariel's Anstey-designed rear suspension optional. The design of the tele-forks was shared with parent company, BSA. There are no documents with this Ariel Twin, which appears to be an older restoration.Lot to be sold without reserve.For further information on this lot please visit Bonhams.com

Lot 803

1974 Honda CB750K2Registration no. RVW 124MFrame no. CB750-2089976Engine no. CB750E-2733442Fifty-plus years on, it is hard to imagine the impact the Honda CB750 had on the motorcycling world when it was unveiled to a stunned public at the 1968 Tokyo Show. True, there had been plenty of four-cylinder motorcycles before, but these had been built in relatively small numbers and aimed at the wealthy few. Here for the first time was a mass-produced four within the financial reach of the average enthusiast, and one whose specification - overhead camshaft, disc front brake, five-speed gearbox, electric starter, etc - made the opposition look obsolete overnight. A trend-setting design of immense significance and one of the truly great classic motorcycles, the CB750 is highly sought after today by collectors. This Honda CB750K2 had already been fully restored when it was purchased by the current owner in 2019 (there are documents on file dating from the previous ownership detailing parts fitted, etc). Last run in May 2021, the machine is described by the private vendor as in excellent condition in every respect, benefiting from a recent service and new battery. Sadly, lack of secure storage has forced its sale. Accompanying paperwork consists of a V5C Registration Certificate and sundry restoration bills.For further information on this lot please visit Bonhams.com

Lot 805

1989 Honda VFR750R Type RC30Registration no. G420 JKYFrame no. RC30-2100025Engine no. RC30E-2100057•Original UK-delivered example•Present ownership since 2011•20,045 miles recorded•Well looked-after and used sparinglyOne of the modern era's few immediately collectible classics, the Honda VFR750R - better known as the 'RC30' - was created for just one reason: to win the World Superbike Championship, a feat it achieved in the nascent series' first two seasons of 1988 and '89. And while American Fred Merkel was bringing Honda its first two WSB crowns, Britain's Carl Fogarty used an RC30 to win the TT F1 World Championship in 1988 and '89, and the equivalent FIM Cup in 1990. No mere short circuit scratcher, the RC30 and its derivatives proved durable enough to win a hat-full of Endurance Classics too. That this latter requirement was also part of the design brief may be determined from the fact that a quick-release front fork and single-sided swinging arm - essential for speedy wheel changes - were part of an unrivalled specification that included a twin-spar alloy beam frame, 16-valve V4 engine with gear-driven cams, close-ratio six-speed gearbox and four-pot front brake callipers. Indeed, so good was the basic RC30 that well prepared privately entered examples were often able to give the works entries a run for their money. All of which did not come cheap: at the time of its launch in 1988 an RC30 cost £8,499, getting on for double the cost of other super-sports 750s. Despite the passage of time and progress of motorcycle technology, the RC30 remains a match for the latest generation of sports bikes but possesses an exclusivity that none of them can approach. 'No other bike from the late-Eighties is lusted after like the RC30,' reckoned Bike magazine, and few would disagree. Delivered new in the UK, this particular RC30 has been owned by the current vendor since 2011 and has recorded only 20,045 miles. The Honda has been kept in a purpose-built workshop together with the other classics in the vendor's collection and has been ridden on only a couple of occasions since acquisition, the last in 2015. Well looked-after, the machine has been dry stored since its last outing with the fuel system and carburettors drained and should require only minimal re-commissioning before returning to the road. Accompanying paperwork consists of old/current V5/V5C registration documents. A very nice example.For further information on this lot please visit Bonhams.com

Loading...Loading...
  • 7979 item(s)
    /page

Recently Viewed Lots