14782 Preisdatenbank Los(e) gefunden, die Ihrer Suche entsprechen

A SERGEANTS HALBERD, 18TH CENTURY with terminal blade of diamond section, crescent axe-head, hooked rear spike, tapering socket, and a pair of short iron straps on a later studded haft with tasseled cloth-covered guard, 137.5 cm

A SOUTH INDIAN AXE (PHARASA), PROBABLY 17TH/18TH CENTURY, MADRAS, TAMIL NADU with broad head of flattened-diamond section, engraved on each face with a pair of scaley fish, chiselled socket engraved with linear ornament, with some early red pigment (light rust), on its wooden haft wrapped with iron ribband, 87.8 cm overall Provenance Roy Elvis (1944-2022) catalogue number E15

A SOUTH INDIAN AXE, 18TH CENTURY, POSSIBLY BIJAPUR, KARNATAKA with small curved axe head engraved with foliage on each face and decorated with an openwork design of foliage and monsters at the base, pyramidal terminal spike with moulded base, long tang, and slender hardwood haft, perhaps the original, with moulded terminal, 46.0 cm Provenance Roy Elvis (1944-2022) catalogue number E21

VICTORIAN GOLD PROSPECTOR'S BROOCH, 1880s designed as a shovel stamped South Africa, with pick axe and bucket, accented with gold nuggets, stamped 9ct to reverse, 5 grams. Novelty gold mining jewellery became popular during the South African Gold Rush of the 1880s, often depicting an assortment of mining tools such as shovel, pick axes and pans, they were mostly embelished with actual gold nuggets as a token of luck and sentiment.Good condition, Stamped 9ct for 9-carat gold, 5 grams.

THE VICTORIAN SILVER-MOUNTED 'SS SPAIN' LAUNCHING AXE, EDWARD BARNARD & SONS, LONDON, 1870 the silver head of battleaxe form inset with steel edge, with a ribbed wood handle, the silver terminal with a chased oak leaf wreath around an inscription, 97mm long The inscription reads: "SPAIN" floated from Building Dock Birkenhead Iron Works 9 May 1871. This ceremonial axe was used by the personnage honoured with launching the 'SS Spain' to cut the fine line which held back the slipway triggers, allowing the vessel to proceed into the water. The steamship 'Spain' was built by Laird Brothers at their Birkenhead Iron Works yard for the National Line, a ship used for passenger and cargo service between Liverpool and New York until scrapped in 1896. Good condition, some rusting to steel

20th century African carved hardwood circular tribal stool, sides decorated with masks, together with a tribal ceremonial axe

A collection of various decorative wares comprising a pair of Noritake pink and gilt twin handled urns with covers decorated with floral displays to centre, a pair of EDM blue and gilt candle holders with pink flowers, a Coalport horseshoe, a Porcelain d'Art Limoges plaque within gilt frame and small companion dish, a pair of opaque glass trinket dishes, a Dresden figure of two children one on a sledge the other by a tree stump and axe and a bisque porcelain figure of a nude lady holding an apple etc. (12)

Pick Axe, spirit level, saws, plane, other tools, shoe last:- One Box.

A fire fighters pick, tools belt & axe twinned with three fire fighters badges, Plymouth, Cornwall & NFS, an Austin Fire Truck manual & a Ladder Manual twinned with a swagger stick

A tribal axe, a knobkerry and a short sword in a scabbard (3)

10 x silver brooches inc lion (4cm), celtic, garland (unmarked), cat & axe (both lacks pins) ~ total weight 63g

Marvel Legends Series Stormbreaker Axe (Endgame) 1:1 scale replica Stormbreaker Electronic Axe, used by Thor from Avengers End Game. Hasbro's premium collection line. Manufactured by Hasbro 2019.(1)Condition Report: Mint in box. comes with Hasbro shipping box.

Neolithic polished greenstone axehead. A ground and polished Neolithic axehead c. 4000BC - 3000BC, trapezoidal in plan with a curved cutting edge and pointed oval profile. The axe is manufactured from a grey-green fine-grained siliceous tuff, a sedimentary volcanic rock, with facetted margins, typical of the axeheads produced at Great Langdale, Cumbria. 107mm x 58mm, 214.6g.

Bronze age flat axe. Circa 2350 to 2050 BCE. 123mm x 62mm. These axes all fit within the earliest phases of metal working in Britain, metalworking stage II, which corresponds to Needham's (1996) Period 2, they are dated, broadly, to the same period as Beaker pottery, barbed and tanged flint arrowheads, copper halberds and gold lunulae. Ref: Needham, S. (1996) Chronology and Periodisation in the British Bronze Age. Acta Archaeologia, vol 67, pp 121-140.

Bronze age artefact group. Incomplete objects including pieces of sword blade, spearhead and axe. Largest 71mm, 112g total weight.

Early Bronze Age decorated flat axe. Circa 2000-1900BC. Copper-alloy, 120mm x 58mm. An exceptional example in a near perfect state of preservation. Decorated on both sides with a series of irregular incised lines that creates a pattern similar to tree bark. Ref: Needham, S. 2017; The Classification of Chalcolithic and Early Bronze Age Copper and Bronze Axe-Heads from Southern Britain.

Large European Bronze Age looped and socketed axe head. Circa 1200-800 BCE. Copper-alloy, 402g. 126mm. A good example with intact fixing loop.

Late Bronze Age looped and socketed axe head. Circa 1000-800 BCE. Copper-alloy, 86mm x 49mm. Detailed with a series of fine curved ribs on both sides.

Bronze Age loop and socketed axe head. Circa 1000-800 BCE. Late Bronze Age, Ewart Park phase. Copper-alloy, 82mm x 37mm. Ref: Schmidt, P.K., Burgess, C., 1981. The Axes of Scotland and Northern England, pl. 89, no. 1369.

Rare Neolithic tooled crystal axe or dagger head, possibly north African or middle-eastern in origin,The vendor lived in the middle east and Egypt for many years.Approx 4.5cm long

PHILIPP, Carl (Karl) (1872 Wien - 1949 Wien) BergsteigerBronze patiniert, ebonisierte Holz-Plinthe. Bezeichnet. H 36 / 39 cm. 5,3 kg. Vollplastische Figur des Mannes, der sich auf den Eispickel stützt, während das Seil über die Schulter geworfen ist. Bronze teils "Grünspan" angesetzt, minimaler Haarriss am Holz hinten. Bildhauer in Wien, Schüler von Kundmann. Philipp schuf zahlreiche Denkmäler und Brunnen. Literatur : Thieme/Becker. Aufrufzeit 27. | Feb. 2025 | voraussichtlich 14:38 Uhr (CET) PHILIPP, Carl (Karl) (1872 Vienna - 1949 Vienna) MountaineerBronze patinated, ebonized wooden plinth. Marked. H 36 / 39 cm. 5.3 kg. Fully sculpted figure of the man leaning on the ice axe while the rope is thrown over his shoulder. Bronze partly "verdigris" attached, minimal hairline crack on the wood at the back. Sculptor in Vienna, pupil of Kundmann. Philipp created numerous monuments and fountains. Literature : Thieme/Becker. Aufrufzeit 27. | Feb. 2025 | probably 14:38 (CET)*This is an automatically generated translation from German by deepl.com and only to be seen as an aid - not a legally binding declaration of lot properties. Please note that we can only guarantee for the correctness of description and condition as provided by the German description.

A Mughal Indian Tabar fighting axe mace with African tribal throwing spearsLocation:If there is no condition report shown, please request

A gilt framed watercolour entitled 'Axe Marshes Near Seaton' by Thomas Rowden (British 1842 - 1926) frame size 58 x 45cm.

An Isle of Wight axe vase, a William Powell peacock vase, a Pallme Konig style vase and a Costa glass apple scent bottle Condition Report:Available upon request

A 19th century Sudanese, Mahdist War era war axe. Comprising of a leather covered wooden shaft, with low grade silver mounts, and a bronze axe head. Together with a Sudanese short spear from the same era. The spear has the traditional leaf shaped point, with raised central ridge. Twisted wire bindings to the mid and end sections, and and a thicker flattened length of steel wrapped around the section holding the blade to the shaft. Provenance: both items were acquired by Captain Robert Charles Couldrey of the Royal Field Artillery, who was seconded to the Egyptian army at the end on WW1, and went on to serve as the Controller General of the Sudan War Supply Board in the early 1920’s. Axe length: 75.5cm, spear length 83.6cm. Condition: some wear to each. The axe has parts of the leather covering split and coming away from the wooden shaft. The bronze axe head has an aged brown / green patina, but otherwise appears to be undamaged. The silver mounts have blackened with tarnish and are a little dented from use. The spear has a fine patina, both to the head and wooden shaft. The end section is a little rough, which may suggest that an additional section once present has broken away in the past.

Royal Doulton Bunnykins signed figurine titled Sir Gawain from the Arthurian Legends Collection, model number DB300. This handmade and hand decorated earthenware piece depicts Sir Gawain in medieval armor, holding an ornate axe and accompanied by a cloaked companion. The base features the Royal Doulton Bunnykins backstamp and bears the signature of Michael Doulton. The figurine comes with its original box and certificate of authenticity. Issued: 2003Dimensions: 4"HCountry of Origin: EnglandCondition: Age related wear.

An early 20th century white metal Buddhist religious idol figurine of Ganesh / Ganesha, the elephant god. Featuring the god seated with four arms, engraved detail to headdress & clothing, holding axe & other items. Raised on decorative stepped base on square foot. Hollow to underside.Measures approx. 12.5cm tall.

A box containing various tools to include hand saws, axe, spirit levels, crowbar

A box containing various tools to include axe, hand held scythe, crowbar, garden shears, pair of Record 4" G-clamps and a box containing a hanging oil lamp, a cased socket set etc.

Star Wars - Palitoy - A scarce boxed Star Wars 'The Power of The Force' Tri Logo Ewok Combat Complete Playpack. The set comes with two Stormtroopers with black Imperial Blasters both marked 'GMFGI, 1977'; Teebo with headgear, stone axe and battle horn, marked 'Taiwan, LFL, 1984' and Wicket W Warrick with head gear and spear, marked 'LFL, 1984'; plus Ewok Assault Catapult with two boulders. Figures and catapult and accessories appear to be in Excellent condition. Figures are contained within bags - the Stormtrooper bag is marked 'Made in Hong Kong' in blue. The box has some storage related crushing and some taping, with some price sticker residue to one side, generally appearing Fair - Fair Plus. The originality of the weapons / accessories is untested and unverified by us, buyers need to use the detailed photos to satisfy themselves as to originality and completeness prior to bidding. The set is unchecked for completeness. (This does not constitute a guarantee) (K)

Star Wars - Palitoy - Kenner - Eight vintage Star Wars 3¾" action figures majority with accessories. Lot includes Jawa with Jawa Blaster and soft robe (GMFGI, 1977, No COO); Biker Scout with Scout Blaster (Made in Hong Kong, LFL, 1983); Klaatu with Skiff Guard Vibro Axe (HK, LFL, 1983) and similar. Figures show signs of light play, and age - the AT-ST Driver is remodelled on Luke Jedi body - otherwise appearing to be in Fair Plus - Very Good condition overall. All items are unchecked for completeness. The originality of the weapons / accessories is untested and unverified by us, buyers need to use the detailed photos to satisfy themselves as to originality and completeness prior to bidding. (This does not constitute a guarantee) (K)

Star Wars - Palitoy - Kenner - A group of six loose vintage Star Wars 3¾" action figures some with accessories. Lot includes Logray with headdress, staff and pouch (Macau, LFL, 1983); Logray with headdress, staff and pouch (H.K. LFL, 1983); Teeboo with headdress, axe and horn (Taiwan, LFL, 1984) and similar. Figures show signs of light play appearing to be in Good - Excellent condition overall. All items are unchecked for completeness. The originality of the weapons / accessories is untested and unverified by us, buyers need to use the detailed photos to satisfy themselves as to originality and completeness prior to bidding. (This does not constitute a guarantee) (K)

Rare porcelain hand decorated glazed figure of a gentleman seated on a tree stump with an axe and pipe. Royal Doulton backstamp. Marked: Factory Proof. Dimensions: 4.25"L x 4"W x 7"HCountry of Origin: EnglandCondition: Age related wear.

A 19TH CENTURY NORTH INDIAN CROW'S BEAK "ZAGNAL" AXE, WITH ITS SILVER DECORATED HEAD, ARMOUR PIERCING TIP. Mounted on a reinforced wooden shaft by way of a very long tang, ensuring its structural integrity. We offer in-house international shipping for all items - you will receive a quote with your invoice. The standard cost for posting 1 or 2 swords is £30+VAT within the UK and £90+VAT to the US.

AN AFRICAN TRIBAL AXE, CARVED WOODEN SHAFT   We offer in-house international shipping for all items - you will receive a quote with your invoice. The standard cost for posting 1 or 2 swords is £30+VAT within the UK and £90+VAT to the US.

AN 18TH CENTURY BATTLE AXE, POSSIBLY BALKAN OR HUNGARIAN We offer in-house international shipping for all items - you will receive a quote with your invoice. The standard cost for posting 1 or 2 swords is £30+VAT within the UK and £90+VAT to the US.

Ca. AD 800 - 1100A massive Viking forged-iron axe head of a hefty form with a circular socket shaft, a narrow neck, and a slightly curved blade that angles downward to the flared cutting edge. Around the socket rim are a pair of tabs and a vertical flange on the end.Size: 65mm x 90mm; Weight: 120gProvenance: Property of an Oxfordshire art professional; previously in an old Canadian collection of F. N., Ontario, formed in the 1980s.

Ca. AD 800- 1000.A gold amulet shaped like an axe head with a flared blade. The opposite end features a shallow round socket designed for suspension. The blade is adorned at its widest point with an engraved solar symbol, featuring a central circular recess surrounded by 10 almond-shaped rays. The reverse side of the blade remains undecorated, providing a contrast to the detailed front. The pendant is threaded with a round-section gold rod, forming a ring with its finials coiling around each other with tapering ends.Size: 30mm x 15mm; Weight: 2.8gProvenance: Private UK collection; From an old British collection formed in the 1990s.

Ca. AD 800- 1000.A silver amulet shaped like an axe head, with a vertical blade. On the opposite end, there is a shallow round socket for suspension, allowing the amulet to be worn or displayed.Size: 25mm x 10mm; Weight: 2.6gProvenance: Property of a London gallery; previously acquired at the art market in Vienna; formerly in an Austrian collection formed prior to 2000.

Ca. 1200 - 800 BCA Bronze Age socketed axe head, featuring a corded band around the socket and a small loop at its base. The casting seam is visible above and below where the two halves have been joined. The surface is covered in a beautiful olive green patination.Size: 110mm x 40mm; Weight: 215gProvenance: Private UK collection; From an old British collection formed in the 1990s.

Ca. 2nd millennium BC. A bronze axe head with a socket cast in one piece with a flat axe blade with a slightly curved cutting edge. The socket with flange wings to help keep a wooden pole in place. Size: 170mm x 50mm; Weight: 335g Provenance: Property of a London gallery, acquired on the UK art market.

Ca. AD 800- 1000.A gold amulet shaped like an axe head with a flared blade. The opposite end features a shallow round socket designed for suspension. The blade is decorated on one side with stamped triangles, each containing a raised dot, with three located at the upper edge and one at each corner of the expanding blade. Between the triangles are registers of punched dots. The opposite side of the blade is undecorated. The pendant is threaded with a round-section gold rod, forming a ring with its finials coiling around each other with tapering ends.Size: 30mm x 13mm; Weight: 2.7gProvenance: Private UK collection; From an old British collection formed in the 1990s.

A GROUP OF FOUR BRONZE ITEMS A Zhou-Han dynasty bronze part belt hook decorated with gold and silver inlay, a bronze vajra end, a straight dagger axe-head ge with sharp edges,(probably Shang dynasty), and an 'L' shaped ge dagger axe-head with single inscribed character (most likely 20th century) 8cm to 22cm long From a private Singapore family collection, acquired 1970s-1990s, and thence by descent Condition Information: The end has broken from the belt hook, the vajra end shows considerable verdigris Additional Information: For a similar example straight 'ge' axe-head see; The Met Museum, object number 47.87, Dagger-Ax (Ge) Ownership Statement: This item is offered for sale in the name of the owner, Loo Seh Chong. For a condition report or further images please email hello@hotlotz.com at least 48 hours prior to the closing date of the auction. This is an auction of preowned and antique items. Many items are of an age or nature which precludes their being in perfect condition and you should expect general wear and tear commensurate with age and use. We strongly advise you to examine items before you bid. Condition reports are provided as a goodwill gesture and are our general assessment of damage and restoration. Whilst care is taken in their drafting, they are for guidance only. We will not be held responsible for oversights concerning damage or restoration.

Ca. AD 1100 - 1200.An iron axe head with a bearded blade, a curved cutting edge and a hefty shaft with a round hole. Crafted primarily from iron, these axe heads were characterized by their robust construction and functional design. Some variations included a bearded design, where the lower portion of the blade extended downward, allowing for a more effective hooking or pulling action. Viking axes were versatile implements, serving both practical purposes such as woodcutting, woodworking, and agriculture, as well as military applications in combat and raids.Size: 160mm x 85mm; weight 590gProvenance: Private UK collection; From an old British collection formed in the 1990s.

Ca. AD 1100 - 1200.An iron axe head with an asymmetrical blade and a round shaft-hole socket with a hammer end. Crafted primarily from iron, these axe heads were characterized by their robust construction and functional design. Some variations included a bearded design, where the lower portion of the blade extended downward, allowing for a more effective hooking or pulling action. Viking axes were versatile implements, serving both practical purposes such as woodcutting, woodworking, and agriculture, as well as military applications in combat and raids.Size: 190mm x 60mm; weight 345gProvenance: Private UK collection; From an old British collection formed in the 1990s.

Ca. AD 1600.A jade carving in the shape of a flat-section axe head. The upper section features a rectangular tang designed for attaching the axe to a haft, carved with straight edges that contrast with the rounded lower portion of the piece. The main body, representing the blade, exhibits a broad, semi-circular silhouette that curves outward in a graceful arc. The edges of the blade are finely polished, tapering to a sharp yet smooth finish.Size: 110mm x 75mm; weight 135gProvenance: Private UK collection; from an old British collection formed pre-2000.

Ca. 2nd millennium BC.A cast bronze axe head with a tubular socket and a blade oriented vertically, while at the back, another edge is arranged horizontally, denoting its adze functionality — a tool with a cutting edge perpendicular to the handle.For similar see: The British Museum, Museum number 2005,0810.10.Size: 215mm x 75mm; weight 995gProvenance: Private UK collection; From an old British collection formed in the 1990s.

Ca. 2nd - 1st millennium BC.A bronze ceremonial axe head with a stylised animal-like form transitioning into a blade-like extension. The head is detailed with features resembling eyes and a nose, lending the piece a zoomorphic quality. The surface displays a mottled patina with shades of greenish-grey and brown-bronze.Size: 125mm x 75mm; weight 310gProvenance: Private UK collection; from an old British collection formed pre-2000.

Ca. AD 900 - 1100.An iron axe head with a bearded blade, a D-shaped shaft-hole socket and a flat butt.Size: 160mm x 150mm; weight 880gProvenance: Private UK collection; from an old British collection formed pre-2000.

Ca. AD 900 - 1100.An iron axe head with an asymmetrical blade and a round shaft-hole socket with a hammer end.Size: 185mm x 50mm; weight 410gProvenance: Private UK collection; from an old British collection formed pre-2000.

Ca. 2nd - 1st millennium BC.A bronze axe head with a tubular shaft and a long flaring blade. Bronze axes were essential tools and weapons, widely used from around 3300 to 1200 BC. Crafted from an alloy of copper and tin, these axes represented a significant technological advancement over earlier stone tools. They were primarily used for cutting wood, clearing land, and in some cases, as weapons in battle. The design of bronze axes varied, with some featuring flat or slightly flared blades, while others had socketed heads for attachment to wooden handles, providing greater strength and efficiency.Size: 195mm x 95mm; weight 1.11kgProvenance: Private UK collection; From an old British collection formed in the 1990s.

Ca. AD 900 - 1000.A collection of five iron axe heads, each featuring a bearded blade with curved cutting edges, a hefty shaft and a D-shaped hole. Viking axes were versatile implements, serving both practical purposes such as woodcutting, woodworking, and agriculture, as well as military applications in combat and raids.Size: 170mm-200mm x 45mm-85mm; 210g-1.16kgProvenance: Private UK collection; From an old British collection formed in the 1990s.

Ca. AD 900 - 1100.An iron axe head with a bearded blade, a D-shaped shaft-hole socket and a flat butt.Size: 150mm x 110mm; weight 900gProvenance: Private UK collection; from an old British collection formed pre-2000.

Ca. AD 900 - 1100.An iron axe head with a bearded blade, a round shaft-hole socket and a flat butt.Size: 155mm x 60mm; weight 430gProvenance: Private UK collection; from an old British collection formed pre-2000.

Ca. AD 900 - 1100.An iron axe head with a curved blade, a shaft-hole socket and a rounded butt.Size: 140mm x 65mm; weight 550gProvenance: Private UK collection; from an old British collection formed pre-2000.

Ca. 2nd millennium BC.A cast bronze axe head with a tubular socket and a blade oriented vertically, while at the back, another edge is arranged horizontally, denoting its adze functionality — a tool with a cutting edge perpendicular to the handle.For similar see: The British Museum, Museum number 2005,0810.10.Size: 200mm x 60mm; weight 745gProvenance: Private UK collection; From an old British collection formed in the 1990s.

SCOTTISH: Three Staffordshire Pottery figures in Highland Dress, including a Portrait Figure of the Marquis of Lorne, standing wearing a kilt, 27cm high, also a matched pair of figures in Highland dress, each with a shield, she with an axe and he a staff, 25cm and 24.4cm high, all decorated in colours (3)  The figure with a feather has a small chip to sock and chips/firing fault to draped fabric. One of the figures with shields has hairline/firing cracks. 

Selection of 4 Scottish ladies brooches to include Celtic art Industries Luckenbooth brooch, Filigree thistle brooch, axe and stone set brooch

A Collection of silver jewellery; Silver Scottish design brooches- Dirk with citrine and agate fitted, Silver axe fitted with agate stones, Silver and carved cameo brooch, Edinburgh silver designer style bangle, Silver gate bracelet and other items

9ct & 14ct yellow gold charms and pendants; Five 9ct yellow gold charms- Viking Axe, Shell, Bull, Golf bag pin, 9ct and glass bottle and 14ct gold and onyx jade pendant. 9ct- 6.65grams.