We found 30650 price guide item(s) matching your search

An early Edwardian three shelf walnut whatnot, the top shelf having a brass gallery and with neat turned and reeded pillar supports to a drawer base with turned supports and brass castors, 22 ins wide

An early 20th Century mahogany circular topped wine table with quadruple turned centre pillar supports and another early reproduction mahogany wine table with piecrust top

A pair of early 20th Century oval based white parian figurines, young hatted boy by a pillar with a vase of flowers and young standing girl with flowers in her apron, 12.5 ins high

A late Victorian mahogany chiffonier having double ledge back with pillar support over double cupboard W 36"

An early 19th century mahogany longcase clock having swan neck and pillar hood containing 8 day movement and painted dial by Corson, Maryport on shaped trunk, pillar and sqaure reeded base

A late George III 8-day longcase clock, 12in. square painted dial with subsidiary seconds and date aperture, four-pillar movement with anchor escapement, in oak case, cross-banded in rosewood with boxwood inlay, hood with swan-neck pediment, 6ft. 7in.

A late George III 8-day Lancashire longcase clock, signed Twist, Ormskirk, 14in. painted dial with moon phases to the arch, subsidiary seconds and date dials, four-pillar movement with anchor escapement, broad mahogany case with swan-neck pediment and flame-veneers, 7ft. 7in. high

A 19th century mahogany breakfast table, the rectangular tilt top raised on a turned pillar and quad sabre supports terminating in brass cap castors

An 18th century oak tripod table, the circular three plank tilt top raised on a turned pillar

A George III mahogany tripod table on slender turned baluster pillar and arched supports

A George II walnut and crossbanded bureau, the slope enclosing central door, pillar compartments; drawers, pigeonholes and sliding well, two short and two long drawers beneath with concave-moulded lower frieze inlaid with parquetry scallop and sunburst, on bracket feet, 92 cm

A large pair of brown glazed ceramic square tapering pillar lamps

A mahogany lamp table oval top carved pillar and platform

REEL: Rare Allcock`s Britannia Patent centre pin reel in 3" diameter smallest catalogued size of the range, ebonite faceplate stamped Patent, 3 screw brass centre boss with spindle adjuster screw, twin original horn handles on nickel sliver plates, front nickel silver rim binding, tension adjuster in face plate recess hole, pillar drum core, ebonite rear flange, (no cracks breaks of damage anywhere) alloy Aerial pattern backplate with optional check button to copper internal calliper check, original correct brass foot, finest collector condition c/w correct fitted block leather case, blue baize lined, sprung centre pad to lid, tiny block initials JRSB impressed to lid, finest condition, Illus.

REELS (2): Garnet of Dublin 2.75" diam all brass Birmingham pattern trout fly reel, black horn handle, constant check clicker, triple pillar, most dark bronzing and a Heaton`s Sun Patent 13388/85 mahogany and brass star back reel, optional check, 4 screw Slater style drum latch stamped Sun, twin polished horn handles on brass eye plates, Bickerdyke line guide, good.

REEL: Rare ABU Sweden Record Expert 2200 3 pillar tournament open frame casting reel, twin black handles, free spool, backplate tension and ratchet adjusters, chrome and stainless, fine.

REEL: An early T Graham of Cockermouth 3.5" diameter all brass wide drum crank wind winch with turned pear shaped handle on straight arm, free turning with no fitted check, 6 pillar drum to iron loop riveted foot, maker`s stamp to face plate, good, c1880.

REEL: A London pattern ebonite/brass 4.5" diameter salmon fly reel with German silver rims, formerly the property of the Earl of Dalhousie, label attached, brass face plate engraved "D4", polished horn handle, quad pillar, smooth constant check, ebonite backplate and front flange, fine.

REEL: Hardy all brass Birmingham trout fly reel 2.5" diameter with virtually all original bronzing, oval logo to faceplate, black handle, smooth constant check clicker, triple pillar, all correct screws, fine, c/w silk line in non Hardy card box.

REEL: A Hodder by Albert Smith fully ventilated trotting reel in the scarce smaller size of 3.5" diameter, twin white handle, central drum screw, pillar drum core, fully ventilated, brass foot, backplate ratchet check, retains most black paint finish.

REEL: A rare Struan Patent all brass trout fly reel in 2.75" diameter size, rarely seen this small in all brass, narrow drum, deep dished drum, central screw, Struan Patent in oval logo to face, correct foot, pillar and drum screws, smooth constant check, fine example.

REEL: Hardy 4" Brass Birmingham plate reel with Rod in Hand and oval and logos to face plate, tapered horn handle, 2 screw, 4 pillar plus foot blade, original screws to backplate, no check, good bronzing.

REEL: Hardy all brass 2.5" Birmingham plate wind winch, triple pillar with tapered horn handle (loose), maker`s oval logo to face plate, smooth constant check, original screws, good finish.

REEL: Hardy brass faced Perfect 4.25" wide drum alloy salmon fly reel, correct smooth brass foot, ivory handle, brass winding plate with Rod in Hand and straight line logos, Turks lock screw to strapped regulator, 1 pillar repaired and pinned, central hole to correct smooth brass foot, good.

REEL: Early brass wide drum collar fitting trolling winch, dates c1800/1825, 3.55" across drum, 2.5" diameter end plates, raised rear check housing holds early spring check clicker, grooved rims, exposed correct pillar screws, curved crank arm, rosewood knob, triple pillar with one piece cast foot block, twin brass rivet to original collar and lyre screw, fine hot lacquer finish throughout. Illus.

REEL: Early Kelly of Dublin brass spike fitting Irish winch, 2.5" diameter, 1.3" across plates, quad pillar with screws to backplate, shaped crank arm, turned ivory handle knob, iron to brass foot block with 2 rivets, iron spike and original tapered screw, makers details to face, fine.

REEL: Early brass narrow drum spike fitting Scottish style winch, 3" diameter, 1.25" across plates, triple pillar with recessed screws to backplate, shaped crank arm, turned ivory handle knob, iron foot block with original iron, good working order, drum part filled with early horsehair twisted line.

REEL: All brass early spike fitting winch, 1.6" diameter end plates, 1" wide, triple pillar, riveted ends, shaped crank arm, tapered bone handle, brass foot block with original turned brass spike and waisted lock nut, retains good original finish.

REEL: All brass tiny early spike fitting winch, 1.2" diameter end plates, 1" wide, triple pillar, riveted ends, shaped crank arm, turned bone handle, brass foot block with original turned brass spike, retains good original finish.

REEL: All brass tiny early spike fitting winch, 1.2" diameter end plates, 0.8" wide, triple pillar, riveted ends, shaped crank arm, turned bone handle, brass foot block with original turned brass spike, retains good original finish.

REEL: Ex Graham Turner collection brass collar fitting winch, 1.75" diameter, single action reel with curved crank arm, polished bone handle, triple pillar secured to rear with round nuts, original collar with liner, original brass lyre screw, fine. * Originally lot 152 Angling Auctions 1st April 1995,Certificate of Authenticity from that sale included with this lot *

REEL: C F Walsh Dundee Scottish pattern salmon fly reel, 3.5" diameter, laburnum wood back and front with light bark colouring to edges, very pretty reel, brass face plate with rosewood taper handle, constant check, triple pillar plus 2 fixing long blade foot, c1880, scarce reel.

REEL: Dingley of Alnwick 3" Uniqua pattern alloy trout fly reel, stamped to backplate "William Mills & Son, New York", ivorine handle, heavy duty drum bar latch, copper pillar drum core, flat calliper check, smooth brass foot, good lead finish.

REELS (2): An Alex Martin of Glasgow & Edinburgh by Dingley 4.25" alloy salmon fly reel, ivory handle, heavy strapped regulator, internally stamped D4, copper pillar drum core, smooth brass foot, most original lead and Farlow 4" all brass trade reel with Fish logo to foot, ivory handle, constant check, appears to have had a regulator fitted at one time, now removed, strange for this model, retains good finish.

REELS (2): An Alex Martin of Glasgow & Edinburgh The Thistle Perfect style 3.75" alloy fly reel, black handle, copper ring line guide, one pillar neatly removed to lower quadrant, ventilated face, good lead finish and a similar Walker Bampton The Lennox 4" Perfect style salmon fly reel with copper O ring guide, ball bearings, rim tensioner, sticky fluff from inside reel case, otherwise good.

REEL: Fine early Hardy The Silex 4.5" alloy casting reel c 1900, factory ? rim cut out, twin ivory handles to alloy cross bar with central red agate bearing, button release, copper pillar to drum, intricate internal check assembly, correct smooth brass foot, 3 rim controls, retains virtually all original dark lead finish.

REEL: Army & Navy London 4" all brass Birmingham plate wind reel, fitted with rarely seen backplate optional check, white horn handle, triple pillar plus smooth brass foot, original screws, retains all original bronzing.

REEL: J. Bernard of London 4.5" all brass salmon plate wind reel with constant check, black horn handle, quad pillar and foot, smooth constant check, script makers name and address details of 45 Jermyn St, St James London.

REEL: Eaton & Deller Crooked Lane London 4" all brass salmon fly reel, raised front check housing, tapered horn handle, quad pillar and block foot, good.

REELS (3): A French Luxor Contact closed face match reel, back wind to release bail, gold/green, fine, a Ru Mer 201 fixed spool reel with early skirted spool, wire bail, anti reverse, brown/gold and a 3" lightweight pressed alloy centre pin reel with pillar drum core, twin handles and ratchet.

REEL: Early English brass wide drum winch with raised rear check housing, 2.75" diameter, 1.6" across plates, triple pillar with exposed lock rounded nuts, 3 screw to check housing, original block foot with 5 pin perforated blade to take leather pad, crank arm, ivory handle, engraved monogram to face, good original finish, c1840/50

REEL: J Bernard of London 4.5" all brass wide drum salmon fly reel, 5 Church Place Piccadilly address, dark horn handle, smooth constant check, quad pillar with block foot, retains most original finish.

REEL: Hardy 2.25" all brass Birmingham plate wind reel, open oval logo to face plate, dark horn handle, triple pillar with correct screws, original foot, retaining virtually all original bronzing.

A Victorian burr walnut oval centre table on a carved four pillar pedestal 1.22 m x 91 cm

A Victorian Mahogany Loo table, oval moulded snap top on pillar base with three heavy carved legs

A C20th satinwood cased Wall Clock having two train movement the face having Roman numerals and flanked by turned pillar features. 35 1/2`` high overall incl: pediment.

A Regency style mahogany twin pillar dining table with two additional leaves, 45" long when closed, 78" extended, 43"w.

A mahogany occasional table, the galleried top with fall front, raised on end pillar supports united by an undertier, to splayed feet, plus a large modern wrought iron & mesh fireguard

A 19TH CENTURY MAHOGANY CHIFFONIER with arched back, fitted one shelf and with cupboards below, having plain pillar supports, 45 1/2" across

An oak and mahogany banded eight-day longcase clock, the replacement movement with painted dial, subsidiary seconds and calendar aperture, signed Jno Blaylock, Longtown, phases of the moon to the arch, four pillar movement, the case enclosed by a shaped panel door, plinth base, the break arch hood with broken swan neck pediment and flanked by fluted columns, height 221cm (83in.).

A Mahogany Eight Day Longcase Clock, the case with swan neck pediment, turned pillars, wavy shaped trunk door with inset plain pilasters, plain rectangular plinth upon bracket shaped feet, 14-inch arched painted dial with Roman and Arabic numerals bearing inscription Willm Barlow, Ashton, date aperture, arch with moonphase (not functioning), four pillar movement with anchor escapement and rack striking on a bell, 236cm high (dial and movement later associated to the case)

A Mahogany Eight Day Longcase Clock, signed Blair Flight, Kenross, circa 1800, the swan neck pediment with blind fret work, fluted columns, nicely figured and inlaid trunk door flanked by inset pilasters, rectangular plinth raised upon later bracket feet, 14-inch painted arched dial with Roman and Arabic chapter, date aperture and subsidiary seconds, floral spandrels, rolling moon in the arch and signed above (minute hand broken), four pillar movement with attached falseplate stamped Osborne, anchor escapement and rack striking (bell missing), 226cm high see illustration

A Mahogany Eight Day Longcase Clock, circa 1820, the nicely figured case with swan neck pediment, gilt painted glazed images of lions and central Prince of Wales feathers, fluted square shaped columns, arched trunk door with acorn finial, flanked by fluted pilasters and inlaid ebony stringing, rectangular plinth with boxwood inlaid stringing and canted corners, 14-inch painted arched dial with Arabic chapter, Prince of Wales feather spandrels, two subsidiary dials for seconds and date, arch with rolling moon, four pillar movement with attached falseplate stamped Owen, anchor escapement and rack striking on a bell, 234cm high see illustration

An Oak Eight Day Longcase Clock, signed A Crawford, Scarbro, circa 1810, the case with a swan neck pediment, turned columns, arched trunk door, rectangular plinth raised upon bracket feet, 12-inch painted arched dial with Arabic numerals, dial centre with subsidiary seconds and date aperture, spandrels and the arch with painted floral decoration, four pillar movement with anchor escapement and rack striking on a bell, 225cm high see illustration

A Scottish Mahogany Eight Day Longcase Clock, signed K.Murdoch, Ayr, circa 1820, the nicely coloured case with swan neck pediment and fluted columns, pierced side sound frets, rectangular trunk door, crossbanded plinth raised upon later bracket feet, 14-inch arched painted dial with Roman numerals, dial centre with subsidiary seconds, date and signed, spandrels depicting figural poets, the arch depicting a figural lake scene, four pillar movement with anchor escapement and rack striking on a bell, 218cm high see illustration

A Mahogany Eight Day Longcase Clock, signed Tho Green, Liverpool, circa 1790, the nicely figured case with swan neck pediment, four fluted columns to the hood, wavy shaped trunk door with plain inset pilasters, raised quatre form panel to the plinth and brick work design to the corners, upon bracket feet, 14-inch white painted dial with Arabic and Roman numerals, inner date ring (central corresponding date hand missing), rolling moon phase in the arch, later minute hand, four pillar movement with attached falseplate unsigned, anchor escapement with rack striking on a bell, 231cm high see illustration

A Longcase Regulator, the satinwood and burr walnut veneered case with arched pediment and applied gilt metal mounts to the plinth, trunk door with a bevelled glass, 12-3/4-inch silvered dial with Roman numerals and inscribed R.Chrystie, Dumfries, subsidiary seconds, single weight driven four pillar movement with deadbeat escapement, 211cm high (dial and movement later associated to the case) see illustration

A Mahogany Chiming Longcase Clock, the case with swan neck pediment, wavy shaped trunk door flanked by inset fluted pilasters, plinth with raised quatre form panel and canted corners, upon stepped skirting, 13-inch arched brass dial with Roman and Arabic chapter ring and inner date ring with corresponding central date hand, textured dial centre with plaque bearing inscription Simcock, Liverpool, subsidiary seconds, arch with rolling moonphase, four pillar movement with anchor escapement and extra attached chiming movement to the side, quarter striking with eight hammers striking onto a nest of eight bells and a further bell for the hours, later seatboard, 244cm high (dial later associated to the movement and both are associated to the case, one weight missing) see illustration

A Mahogany Eight Day Longcase Clock, swan neck pediment with glazed front apertures, fluted columns, trunk with blind fretwork, nicely figured trunk door flanked by inset fluted pilasters, plinth with raised quatre form panel, later bracket feet, 13-inch arched brass dial with Arabic and Roman chapter ring with inner date ring and corresponding central date hand, textured dial centre with subsidiary seconds (hand missing), plaque bearing inscription Monks, Prescot, later added arch with printed scene, four pillar movement with anchor escapement and rack striking on a bell, (dial later associated to movement and both are associated to the case), 241cm high see illustration

A Mahogany Eight Day Longcase Clock, signed Obadiah Brandreth, Middlewich, circa 1790, the case with swan neck pediment, turned pillars, wavy shaped trunk door flanked by fluted pilasters, rectangular plinth with later feet, 13-inch arched brass dial with Roman and Arabic chapter ring with inner date ring (central date hand missing), dial centre with engraved scroll work and subsidiary seconds, rolling moon arch signed above, four pillar movement with anchor escapement and rack striking on a bell, 218cm high (one weight missing) see illustration