We found 137669 price guide item(s) matching your search
There are 137669 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
137669 item(s)/page
18ct yellow gold, sapphire and diamond ring, court style tapering band gypsy set with a round cut sapphire, with three old cut diamonds set to either side, diamonds weighing 0.06 carats approximately, Chester 1900, Size K, 2.6 grams.Condition report: Sapphire approximately 3mm diameter. Violet-blue colour, old cut. Diamonds typical old cuts. Tapering court style mount in good condition with minor scratches commensurate with age. 8mm at the widest.
A platinum, diamond, and sapphire cocktail ring, set with a central quatrefoil floral design, within a border of calibre-set sapphires, the chamfered rectangular mount inset with round-cut diamonds, the shoulders inset with graduated round-cut diamonds, total diamond weight 1.70 engraved to shank, size M 1/2, 7.3 grams.
A sapphire and diamond openwork cluster ring; the large square plaque with central oval sapphire and diamond cluster within an openwork scrolling frame; to a basket mount with round brilliant cut diamonds in collet mounts to terminals of outer tubular batons. Plain shank marked '18k'. Size O 1/2, 3.5 x 3cm. 9.6 grams
A silver torque bangle, with a mixed oval-cut ruby set to each terminal within a rope-twist yellow metal border, hinged opening, interior diameter approximately 6.5 cm, together with a silver and multi-coloured sapphire bangle, set with round-cut yellow, blue, pink, red, orange, and green sapphires, internal diameter approximately 7cm. (2)
A diamond, sapphire, and ruby hinged eternity ring, the hoop set with calibre-cut rubies and sapphires, with two hinged segments of diamonds, white metal shank unmarked, size O.Condition report: Ring mount slightly oval in shape, overall good condition, in need of a clean behind the stones. Unmarked, likely white gold or platinum. Could not be resized.
A platinum and diamond ladies cocktail watch / bracelet, with oval Arabic numeral dial, the bezel pave-set with round-cut diamonds, the articulated strap segments with openwork detail, inset with diamonds, the largest collet-set diamonds approximately 0.20 carats each, with cabochon sapphire winder, on adjustable black fabric strap, diamond segment approximately 8 cm long.
A 9ct rose gold and pear-cut aquamarine ring, size V, together wiht a 9ct yellow gold and round-cut sphene ring, the sphene approximately 4.3 mm diameter, size R 1/2, a 9ct white gold and pink sapphire ring, size W, and a 9ct white gold and green tourmaline ring, size V 1/2. (4)Condition report: 6.2 grams combined. All rings could possibly be resized by a jeweller
A cultured pearl necklace with gem set clasp, comprising two strands of graduated cultured pearls, to an openwork lozenge-shaped clasp, millegrain set with a circular mixed-cut sapphire bordered by rose and lasque-cut diamonds, white precious metal mounted, (sapphire untested for natural/synthetic origin), shortest length 43.5cmCondition report: The cultured pearls have scuffs, nicks, pitting and blemishes to the nacre surface, with grease and dirt residue, and graduate from approximately 8.5mm to 5.5mm in diameter. Stringing is frayed in places. The clasp is currently functioning and has surface wear. The sapphire has surface scuffs and nicks and is untested as natural/synthetic. Diamonds have a typically greyish appearance, some stones with chips and fractures. Dimensions of clasp approx. 1.85cm length x 0.9cm width. Gross weight approx. 51gm.
Three gem set dress rings, comprising a diamond and green stone panel ring, the old brilliant-cut diamond bordered by rectangular-cut green stones to the cardinal points, framed by flowerheads and foliage, two colour precious metal mounted, a late Victorian half pearl half hoop ring, 18ct gold mounted, hallmarked for Birmingham 1889, (one half pearl deficient, half pearls untested for origin), and a sapphire and diamond cluster ring, 9ct gold mounted, ring sizes P½, M½ and O respectively (3)Condition report: First ring: green stones are heavily chipped and abraded and will require replacement. The diamond is bright and lively, weighing approx. 0.20ct. Heavy wear to mount and setting, thinning to underside of setting and to sides of shank, due to wear against another ring. Mount unmarked and untested. Gross weight approx. 4.8gm. Second ring: one half pearl missing, heavy wear and fractures to surface of other half pearls. General wear to mount. Gross weight approx. 3.9gm. Third ring: Scattered small chips to sapphires, surface wear to stones and mount. Gross weight approx. 1.2gm.
A sapphire crescent bar brooch, designed as a crescent moon of graduated oval and cushion-shaped mixed-cut sapphires in claw settings, to a similarly set bar with bead terminals, yellow precious metal mounted, (later fitting) length 4.7cmCondition report: Sapphires have slightly variable greyish and purplish-blue hues and most contain inclusions that are visible to the naked eye, including areas of angular colour zoning, feathers, fractures and mineral inclusions. Sapphires have chips/nicks and scuffs to the surface, commensurate for use, and graduate from approximately 5.5mm length x 4.5mm width to 3.5mm length x 2.5mm width. The mount has signs of general wear, with patchy wear to the tips of the claws, and the fittings are later, having dark solder joins at the junctions to the mount. Some of the claws may require re-tipping. The brooch pin is currently functioning. Metal standard is untested. Gross weight approx. 5.1gm.
A sapphire and diamond panel ring, the square step-cut sapphire millegrain set within a border of graduated single-cut diamonds, two colour precious metal mounted, total diamond weight approximately 0.25ct, ring size O½Condition report: The sapphire has a dark greenish-blue hue and contains multiple fracture and fissure inclusions, with areas of whiteish colour zoning, visible under magnifcation. The sapphire has surface abrasion, a small surface chip and measures approx. 5.3mm in length x width and 4mm depth. Diamonds are fairly bright and lively with slightly variable colour and clarity, some stones with small nicks/chips and surface-reaching fractures, estimated SI1 to P2 clarity and H to K colour, assessed mounted. The mount has surface wear throughout and the edges of the setting have patchy wear and thinning, with small losses of metal in places. The lower half of the shank appears to be replaced and the outer sides of the setting are worn. The shank has an indistinct stamped mark. Metal standard is untested. Gross weight approx. 2.2gm.
A collection of jewellery, comprising two 9ct gold wedding bands, a sapphire and diamond cluster ring, (three stones deficient), a blue and white stone full hoop ring, (four stones deficient), a 9ct gold St Christopher pendant, a 9ct gold heart-shaped locket pendant, an expanding openwork bracelet/ring, stamped '375', a 9ct gold dress ring, and further items (16)
A bi-colour leopard's head ring, of crossover design, with circular-cut green stone eyes, with Dutch '750' and '925' stamped marks, together with a sapphire and diamond half hoop ring, with alternate circular mixed-cut sapphires and round brilliant-cut diamonds in square grain settings, 9ct gold mounted, and a pair of cultured pearl set ear clips, each designed as a foliate spray, on screw-back fittings stamped '9CT', ring sizes F and M respectively, ear clips length 2.9cm (3)Condition report: Approximate gross weights only: half hoop ring 2.8gm, leopard's head ring 12.1gm, ear clips 4.8gm.
A collection of jewellery, comprising a sapphire, ruby and emerald bombé cluster ring, of ropetwist lattice design, stamped 'K18', a turquoise and half pearl cluster panel ring, an amethyst single stone ring, three further dress rings, a white metal panel bracelet, the openwork panels decorated with cherubs, foliate scrolls and flowerheads, and three further items, (half pearls untested for origin), first ring size N, bracelet length 16cm (10)Condition report: Approximate gross weights only: gem set bombé ring 7.8gm, turqoise and half pearl ring 7.7gm, amethyst ring 5.5gm, yellow stone ring 5.3gm, blue stone ring 8.2gm, pearl and paste ring 3.5gm, bracelet 58gm.
A diamond and vari gem-set insect brooch, naturalistically modelled with baroque pearl abdomen, octagonal step-cut sapphire thorax, old brilliant-cut diamond head and circular mixed-cut ruby eyes, his wings edged with further similarly cut rubies and rose-cut diamonds, two colour precious metal mounted, (one diamond deficient, pearl untested for origin, fitting later replaced), length 2.9cmCondition report: Chips, scuffs and surface-reaching fractures to the sapphire, rubies and diamonds. The sapphire and rubies contain areas of angular whiteish colour zoning and feather/fracture inclusions. Diamonds are mostly bright and lively but some stones have a greyish, fractured appearance. One diamond is missing. The pearl is untested for natural/cultured/freshwater origin and has scuffs, pits and blemishes to the nacre surface. The mount has surface wear, scuffs, nicks/chips and areas of porosity and some tarnishing. The porosity may be due to solder repairs. The brooch pin and visor clasp are currently functioning but the clasp may be later replaced. Metal standard is untested. Date of manufacture unknown. Gross weight approx. 6.4gm.
A pair of sapphire and diamond cluster ear studs, each a flowerhead cluster of circular mixed-cut sapphires and single-cut diamonds in claw settings, on post fittings, 18ct white gold mounted, with butterflies stamped '18', total diamond weight approximately 0.30ct, diameter 0.9cmCondition report: Sapphires are well matched, of dark blue hues, both containing natural inclusions and areas of colour zoning visible under close inspection. One of the sapphires has a surface fracture/scuff that extends from the girdle towards the centre, and both sapphires have surface wear, nicks and small chips. Diamonds are well matched and bright, occasional stones with chips/fractures and surface-reaching fractures, with estimated SI1 to P2 clarity and H to J colour, assessed mounted. The mounts have surface wear throughout and the butterflies are functioning. Marks have patchy wear. Gross weight approx. 2.5gm.
A collection of rings, comprising an Edwardian sapphire and diamond set panel ring, hallmarked for Birmingham 1906, a 22ct gold wedding band, a 22ct gold ring mount, (stone deficient), a white metal wedding band, stamped 'PLAT', a further wedding band, stamped '14K', a 9ct gold heart-shaped signet ring, a 9ct gold cluster ring, and a keeper ring, stamped '18', first ring size M (8)Condition report: Approx. gross weights only: sapphire and diamond ring 3gm, 22ct gold wedding band 3.6gm, 22ct gold ring mount 4gm, white metal wedding band 2.5gm, wedding band stamped '14K' 2.5gm, 9ct gold signet ring 1.5gm, 9ct gold cluster ring 0.7gm, keeper ring stamped '18' 2.7gm.
A lady's 9ct gold bracelet watch by Rotary, the cushion-shaped silvered dial with baton markers, to a jewelled manual wind movement and brick-link bracelet, case and bracelet also signed SD, (later winder), together with a sapphire and half pearl set foliate bar brooch, and a half pearl set bird bar brooch, (half pearls untested for origin), watch case width (3)Condition report: Approximate gross weights only: watch (excluding movement) 9.7gm, first brooch 1.5gm, second brooch 1.1gm.
A sapphire and bouton pearl wreath brooch, collet set with trios of circular mixed-cut sapphires to the cardinal points, spaced by single bouton pearls, yellow precious metal mounted, (pearls untested for origin), length 2.8cmCondition report: Sapphires have variable light to dark greyish and purplish-blue hues, some stones containing mineral inclusions that are just visible to the unaided eye. All stones have surface wear, scuffs and small chips/nicks commensurate for use. Pearls have surface wear, scuffs and subtle blemishes to the nacre surface. The brooch mount has general wear and the brooch pin and hinge are later replaced, with an associated dark solder join. Metal standard is untested. Gross weight approx. 2.8gm.
Five gem set dress rings, comprising a sapphire and diamond half hoop eternity ring, 9ct gold mounted, two sapphire and white stone cluster rings, each 9ct gold mounted, a sapphire and white stone crossover ring, also 9ct gold mounted, and an amethyst single stone ring, 9ct gold mounted, first ring size M (5)
A collection of dress rings, comprising a sapphire and diamond oval cluster ring, 9ct gold mounted, a diamond set dress ring, 9ct gold mounted, two other cluster rings, 9ct gold mounted, (three stones deficient), a white stone half hoop ring, stamped '9ct', a garnet and cultured pearl half hoop ring, stamped '9ct', (one pearl deficient), and a further cluster ring, first ring size M½ (7)Condition report: Combined gross weight approximately 23gm.
A sapphire and opal half hoop ring, alternately set with circular mixed-cut sapphires and cabochon opals, 9ct gold mounted, together with a blue and white stone ring, stamped '9CT', a white stone ring, stamped '9CT', and a cluster ring, stamped '9CT SIL', first ring size L½ (4)Condition report: Approximate gross weights only: first ring 2.2gm, second ring 2.4gm, third ring 2.4gm, fourth ring 2.3gm.
A set of three diamond set half hoop rings, comprising a diamond half hoop ring, channel set with princess-cut diamonds, hallmarked for London 1995, a sapphire and diamond half hoop ring, channel set with pairs of square step-cut sapphires spaced by princess-cut diamonds, hallmarked for London 1995, and a ruby and diamond half hoop ring, of conforming design, also hallmarked for London 1995, each platinum mounted, with scroll engraved gallery, maker's mark GS&S, ring sizes R½ and S (3)Condition report: All rings have surface wear, scuffs, scratches and nicks/chips throughout, commensurate for use. The settings appear to be hand finished, with a slight unevenness to the position of the drill holes to the underside of each setting. Diamonds are well matched, bright and lively, with estimated VS1 to SI2 clarity and H to J colour, assessed mounted. Sapphires have areas of whiteish colour zoning and surface nicks/minor chips and scuffs. Some of the rubies have small surface-reaching fractures/fissures and all have surface nicks/minor chips and scuffs. Average length/width of rubies and sapphires approx. 2.7mm each. Width of each setting approx. 3.8mm/3.9mm. Hallmarks are clearly struck.Approximate total diamond weights: diamond half hoop ring 1.30ct, sapphire and diamond half hoop ring 0.35ct, ruby and diamond half hoop ring 0.35ct.Approximate gross weights: diamond half hoop ring 7.4gm, sapphire and diamond half hoop ring 6.5gm, ruby and diamond half hoop ring 6.5gm,
A collection of antique and later jewellery, comprising a white sapphire two stone crossover ring, the oval mixed-cut sapphires in pinched collet foiled closed-back settings, (later adapted), an amethyst single stone brooch, with foliate scroll and ropetwist wirework borders, stamped '9CT', a Victorian panel brooch, with swivel glazed compartment, to an openwork border of entwined branches and leaves, a cut steel buckle, a garnet circlet brooch, stamped '900', and a figural intaglio ring, first ring size N½, first brooch length 2.8cm (6)
A sapphire and diamond pendant necklace, designed as a crescent-shaped panel with central cluster, the principal cushion-shaped sapphire bordered by old and single-cut diamonds, between channels of alternating similarly cut sapphires and diamonds, adapted with a later trace-link back chain stamped '9C', total diamond weight approximately 0.45ct, pendant width 4.2cm, necklace length 46cmCondition report: Sapphires are well matched, of mid purplish-blue hues, with good transparency and areas of whiteish colour zoning visible under magnification. One of the smaller outer sapphires is chipped, the remaining sapphires have light facet edge abrasion. Largest sapphire dimensions approx. 5mm length x 4.5mm width x 2.5mm depth. Diamonds are mostly well matched, bright and lively. One of the smaller outer diamonds is chipped, the remaining diamonds have estimated VS2 to SI2 clarity and H to K colour, assessed mounted. Length of central cluster approx. 9.5mm. The crescent has surface wear, scuffs, nicks and patchy tarnishing/firestaining, with wear to the tips and edges of the settings. Some of the claws may require re-tipping. The crescent is likely to originally have been a brooch and has been adapted as a necklace with a later added chain. The chain has light surface wear and the clasp is functioning. Metal standard is untested. Gross weight approx. 9.3gm.
A pair of sapphire and diamond cluster ear clips, each centred with a cushion-shaped mixed-cut sapphire in claw setting, bordered by round brilliant-cut diamonds, on hinged clip fittings, yellow precious metal mounted, total diamond weight approximately 1.40ct, length 1.85cmCondition report: Sapphires are well matched, of very dark greenish-blue hues with areas of colour zoning and fractures/fissures visible under magnification and transmitted light. Some of the fractures/fissures are surface-reaching and both sapphires have chips, scuffs and scratches to the surface. Sapphires measure approximately 11mm length x 10.5mm width x 7.1mm depth and 10.8mm length x 10.1mm width x 6.25mm depth respectively. Diamonds are well matched, bright and lively, with estimated VS1 to SI2 clarity and H to J colour, assessed mounted. The mounts have surface wear, chips and nicks throughout, with patchy wear to the tips of the claws. The hinged clips are functioning. Both clips have indistinct stamped marks. Metal standard is untested. Gross weight approx. 14.8gm
A sapphire and diamond set panel bracelet, the boat-shaped panel with articulated terminals, pierced and millegrain set with square step-cut sapphires, alternating with round brilliant and single-cut diamonds, on a baton-link bracelet, two colour precious metal mounted, numbered ?65, total diamond weight approximately 0.12ct, length 17.5cmCondition report: Sapphires are well matched, of mid to dark blue hues with areas of whiteish colour zoning that are easily visible under magnification. All have surface wear, nicks and minor chips, commensurate for use. Largest sapphire measures approx. 3mm in length/width. Diamonds are well matched, bright and lively, with estimated VS1 to SI2 clarity and H to J colour, assessed mounted. Largest diamond weight approximately 0.05ct. The bracelet panel is partly articulated with a hinged section to each end. The panel and bracelet links have light surface wear, scuffs, scratches and nicks/chips, commensurate for occasional use. The panel has areas of porosity to both sides, at the junction of the white and yellow metal sections. Panel measurements approx. 4.6cm length x 5.3mm width. The clasp and safety catch are currently functioning. The bracelet is not marked and metal standard is untested. Gross weight approx. 6.7gm.
A synthetic sapphire and diamond line bangle, of hinged oval hollow form, the graduated oval mixed-cut synthetic sapphires spaced by trios of old-cut diamonds, above a scroll pierced gallery, yellow precious metal mounted, total diamond weight approximately 1.20ct, inner diameter 5.6cmCondition report: The synthetic sapphires are mostly well matched, of mid to dark-blue hues, and contain small bubble inclusions when viewed under magnification. The synthetic sapphires graduate from approximately 7.5mm to 9.5mm in length and all have surface wear, scuffs, nicks and occasional small chips. Diamonds have variable colour and clarity but give an overall lively appearance, some stones with chips/fractures and most stones with eye visible inclusions, with estimated SI2 to P2 clarity and I to K colour, assessed mounted. Diamonds graduate from approximately 0.02ct to 0.10ct in weight. The mount has general wear, scuffs, scratches and nicks throughout, commensurate for use, and the tongue clasp is tight fitting. The back of the bangle has a solder repair and the tips of the claw settings are worn, some requiring re-tipping. Metal standard is untested. Gross weight approx. 17.8gm.
A sapphire and diamond cluster ring, designed as an abstract spray of circular mixed-cut and navette-shaped sapphires, framed by graduated round brilliant-cut diamonds, 18ct two colour gold mounted, with London import marks for 1975, total diamond weight approximately 0.30ct, ring size OCondition report: Scuffs and small nicks/chips to sapphires, which have slightly variable mid to dark blue hues, some stones with areas of colour zoning. Diamonds are well matched, bright and lively, occasional stones with possible small nicks to the surface, estimated VS1 to SI2 clarity and I to K colour, assessed mounted. General surface wear and patchy tarnishing to mount. Marks are clearly struck, maker's mark is 'C&F'. Gross weight approx. 4.6gm.
An early 20th century sapphire and diamond three stone gypsy ring, the tapered band inset with a circular mixed-cut sapphire between two old-cut diamonds, with presentation inscription dated 1908 and Austro-Hungarian dog's head gold mark, total diamond weight approximately 0.10ct, ring size approximately H
A sapphire and diamond panel bracelet, circa 1915-20, designed as a series of articulated pierced and millegrained panels of geometric design, set throughout with graduated old brilliant, Swiss and single-cut diamonds, spaced by channels of step-cut sapphires, on an expanding-link bracelet, white precious metal mounted, with yellow metal tongue clasp, numbered C212, total diamond weight approximately 0.60ct, length 16.3cmCondition report: One of the expanding baton links, next to the panelled section, is no longer sprung and requires repair. One of the sapphire set channels has been solder repaired at the junction to the central cushion-shaped panel and is no longer articulated at this point. The underside of this channel, and the sapphire channel on the opposing side, have yellowish staining to the mounts. The panels have occasional dark solder joins to the sides, one probably as a result of repair, the others likely to be part of manufacture The panels have otherwise light surface wear, nicks and scuffs throughout, with slight thinning at edges to the settings. There is a small solder repair to the end link of the bracelet, adjoining the tongue clasp. The expanding links are otherwise currently functioning and have scuffs, nicks and chips throughout.Diamonds are well matched, bright and lively, with very occasional small chips/nicks to the surface, estimated VS1 to P1 clarity and H to J colour, assessed mounted. Diamonds graduate from approx. 0.10ct to 0.01ct. Sapphires have slightly variable mid to dark purplish-blue hues, some stones containing mineral inclusions, feathers/fractures and areas of whiteish colour zoning, all with surface wear, scuffs and nicks/small chips. Metal standard is untested and the bracelet appears to be unmarked. Gross weight approx. 8.9gm.
Three gem set dress rings, comprising a sapphire and diamond three stone ring, of crossover design, obliquely claw set with a circular mixed-cut sapphire and two round brilliant-cut diamonds, stamped '750', together with a vari gem-set crossover dress ring, and a baroque pearl single stone ring, stamped '750', (pearl untested for freshwater/cultured origin), first ring total diamond weight approximately 0.30ct, ring size approximately I (3)Condition report: Approximate gross weights only: first ring 3.5gm, second ring 4.5gm (size M½), third ring 6.4gm (size J½).
-
137669 item(s)/page