There are 88753 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribeA HAMMERED GOLD COLOURED HINGED BANGLE The tapering bangle to a concealed clasp, stamped 750 N.22. with unidentified maker's mark Size/dimensions: inner width 6.2cm Gross weight: 36.6 grams Condition Report: Some light surface scratches and scuffs commensurate with use, the clasp in good working orderCondition Report Disclaimer
CARTIER, LOVE, A WHITE GOLD CUFF BANGLE The polished bangle with screw detail, stamped Cartier 20 IBD821 Au 750 with Swiss gold mark and common convention mark, with Cartier Certificate dated 30.07.2019 Size/dimensions: inner width 6.8cm Gross weight: 28.6 grams Condition Report: The bangle has some scratches and scuffs to the surface commensurate with use, the stamps are clearCondition Report Disclaimer
A MULTI GEM SET CUFF BANGLE The tapering broad gold coloured bangle set with variously shaped cabochon and facetted sapphires, emeralds and rubies, with trios of brilliant cut diamonds, approximately 0.70 carats total, unmarked Size/dimensions: 3.1cm wide, bangle inner width 5.7cm to 6.3cm Gross weight: 45.1 grams Condition Report: The cuff has some light scuffs and scratches, a couple of small knocks and small deeper scratches to the bangles edge. The stones are all present and correct, the two oval cabochon rubies have slightly abraded looking surfaces, but this could be due to the polish of the stone and surface reaching inclusions. The diamonds are all present and correct, bright and lively. The gap to fit the arm through is approximately 3.3cm wide. Testing as higher carat gold, 14+Condition Report Disclaimer
A MID 19TH CENTURY GOLD AND EMERALD MAKARA HEAD BANGLE, MADRAS, TAMIL NADU The gold bangle with graduated chased makara heads, each with graduated circular cut emerald eyes, to a stylised rudraksha bead clasp decorated with an animal mask, with screw in fitting, in original fitted case Size/dimensions: inner width 6cm, the heads measuring from approximately 1.4cm to 2.4cm, the clasp section 3.4cm high x 2.2cm Gross weight: 92.5 grams By Repute Formerly the property of Jane Sandys, wife of Lieutenant General George Sandys (1796-1864) was Commander in Chief of Madras and Colonel of the 6th Madras Light CavalryLiteratureS. Stronge, N. Smith & J.C. Hale A Golden Treasury: Jewellery From The Indian Subcontinent (Victorian And Albert Museum Indian Art Series), London 1988 p. 93 for an image of a similar pair of bangles. The noted 19th century art historian and Indian art scholar Ernest Binfield Havell, who was principal of the Madras School of Industrial Arts from 1884 to 1892; the Principal of the Calcutta School of Art; Keeper of the Government Art Gallery from 1896 to 1906, and a founder of the Indian Society, describes how bangles such as these were the preserve of Indian Royalty and Nobility, and were worn by Princes and Rajas, and also often gifted by them to other high ranking recipients. Condition Report: The bangle has a slight bend to the emerald screw in fitting surmount and so it isn't entirely straight. There are a couple of tiny holes to the gold surface which appears to be from construction. The emeralds are all present and correct, bright, one of them has a few small chips/nibbles, only noticeable under close inspection. The hinge and screw fitting in good working order. Condition Report Disclaimer
CARTIER, LOVE, A 18 CARAT GOLD BANGLE The polished bangle with screw head detail, signed Cartier 18 FLG661 Au750 with maker's mark and common control mark, with original screw driver, fitted case, with outer card case and instruction booklet Size/dimensions: 3.8mm wide, inner width 5.7cm Gross weight: 20.3 grams Condition Report: Some light scuffs and scratches commensurate with wear. The hinge and clasp in good working order, the screw requires just a quarter turn to open and lock, secure. The box and screw driver has minimal wear, the outer card box has a couple of tiny marks. The bangle has a rose gold tone.The 18 on the bangle indicates the bangle size Condition Report Disclaimer
BULGARI, B.ZERO1, A STAINLESS STEEL AND 18 CARAT GOLD BANGLE The hinged bangle with stainless steel borders, the sides imprinted with BVLGARI, stamped Bulgari Made in Italy Steel, to an 18 carat gold centre, stamped with SB maker's mark, Sheffield hallmark and common control mark, also stamped Au750 with Italian control marks, in a Bulgari case, with pouch and outer card box Size/dimensions: inner width 6.6cm Gross weight: 30.6 grams Condition Report: The bangle is 7mm wide, there is scuffing and dinks commensurate with use, the side isn't highly polished. The hinge and clasp in working orderCondition Report Disclaimer
A VICTORIAN DIAMOND, HALF PEARL AND ENAMEL HINGED GOLD BANGLE CIRCA 1870 The tapering broad bangle with rope twist borders, the front with a cross bottony, with half pearl set arms and a trefoil of diamonds to the terminals, centred with an old cut diamond with rose cut diamond accents, on a blue enamelled ground, with a glazed locket compartment verso, concealed clasp Size/dimensions: inner width 5.8cm Gross weight: 38.7 grams Condition Report: The bangle has some wear commensurate with age and use, scuffs, a couple of small knocks to the back of the bangle, a section of rope twist border is lacking, the hinge and clasp in good working order, some chips and losses to the enamel. There is lead solder to the back of the construction pins Condition Report Disclaimer
CARTIER, DOUBLE C, AN 18 CARAT GOLD BANGLE The reeded three colour bangle with polished C terminals, signed Cartier 750G21577 17 © Cartier 1997, and stamped with common control mark and French poinçons Size/dimensions: inner width 5.9cm Gross weight: 30.3 grams Condition Report: There are some light surface scuffsCondition Report Disclaimer
A collection of jewellery, comprising an amethyst and half pearl pendant necklace, stamped '9CT', a dog bar brooch, stamped '15CT', a further bar brooch, stamped '9CT', a 22ct gold wedding band, a 9ct gold bangle, a signet ring, a dress stud, signed TIFFANY & CO. and stamped '18K', three panel brooches, and a white metal curb-link bracelet, (half pearls untested for origin), necklace length 41cm (11)Approximate gross weights only: pendant necklace 3.6gm, dog bar brooch 5.8gm, heart bar brooch 1.7gm, wedding band 6.3gm, bangle 10.3gm, signet ring 3.7gm, dress stud 1gm, agate brooch 18.3gm, ceramic brooch 17gm, fossil brooch 34.5gm, bracelet 51.5gm
A collection of antique and later jewellery, comprising a late Victorian/Edwardian bangle, of hinged oval form and twisted design, stamped '9CT' and signed HG&S, two short fancy-link chains, a regimental bar brooch, stamped '9CT', a half pearl set spray brooch, stamped '9C', and a gilt metal glazed locket pendant, (half pearls untested for origin), bangle inner diameter 5.8cm (6)Approximate gross weights only: bangle 11.2gm, two short chains combined 16.5gm (untested as gold/gilt metal), bar brooch 3.1gm, spray brooch 1.1gm
A silver slave bangle by the Guild of Handicraft, designed as a continuous frieze of beads and foliage, with reeded borders, signed and hallmarked for London 1990, inner diameter 7.25cmSurface wear, scuffs and chips/nicks throughout, with patchy tarnishing. Hallmarks and the maker's mark are clearly struck. Width approximately 7mm. Gross weight approximately 60.8gm.
A collection of jewellery, comprising a black opal doublet and diamond set bracelet, 14ct gold mounted, (one synthetic opal later replaced), a citrine single stone pendant, on velvet collar, two diamond set half hoop rings, a stone set bangle, 9ct gold mounted, a cultured pearl set wreath brooch, 9ct gold mounted, three enamel brooches, and three further brooches, (half pearls untested for origin), bracelet length 19cm (12)Approximate gross weights only: bracelet 14gm, citrine pendant 10.8gm, two half hoop rings combined 3.2gm, bangle 5.5gm, wreath brooch 2.4gm
A 9ct gold bangle, of hinged oval form, with London hallmark possibly for 1893, maker's mark CS FS, and a double row curb-link bracelet, stamped '9 .375', with padlock clasp, (later adapted), bangle inner diameter 5.8cm, bracelet length approximately 17.5cm (2)Approximate gross weights only: bangle 10.5gm, bracelet 23.7gm. The hinged bangle has one small ding to the outer edge of the bangle, close to the clasp, it has some superficial scratching commensurate with age.. The clasp is in functional order and clips cleanly into place and the security chain is intact
A Danish silver bangle designed by Bent Gabrielsen for Hans Hansen, of tapered design with hoop-shaped clasp, signed and stamped '925S DENMARK', with London import marks for 1972 and sponsor's mark DSD for Danish Silver Designs, inner diameter 6.1cmScuffs, scratches, chips and nicks throughout, commensurate for use. Marks are clearly struck. Diameter of hoop 3.35cm. Gross weight approximately 44.2gm.
A three colour precious metal bangle, of hinged oval twisted design, stamped '375', together with a 9ct gold gate-link bracelet, and a belcher-link bracelet, stamped '18kt', (indistinctly hallmarked), bangle inner diameter 6cm (3)Approximate gross weights only: bangle 6.5gm, first bracelet 9.5gm, second bracelet 8.3gm
A pair of silver grape scissors, cast with fruiting vine by Ray Hall, Birmingham 1992, 15.5cm long, a pair of Edwardian silver miniature clogs, import marks for Chester 1903, a pair of late Victorian silver scallop shaped salts, a Continental silver circular brooch, and a silver hinged bangle, 7oz overall. (7)
An Archaeological Revival gold bangle, of hinged oval form, applied to the front with a frieze of ropetwist, wirework and beaded scrolls and borders, signed SB&S and stamped '15CT', cased by Camerer, Kuss & Co., inner diameter 6.05cmSome elements are missing to the applied wirework and bead decoration. Patchy tarnishing/discolouration to frieze and bangle interior. Splits/chips to the outer edges of the back of the bangle, to the side of bangle and to the hinge. Dings, dents and chips/nicks to bangle, commensurate for use, with scuffs and scratches throughout, mostly to the back. The hinge is currently functioning and the clasp is tight fitting. Width 3.15cm. Metal standard is untested. Gross weight approximately 49.2gm. The case is worn.
A collection of silver and white metal jewellery, to include a silver hinged bangle, with foliate scroll decoration, an abstract silver fancy-link necklace, with London import marks for 1975, a pair of lorgnettes, assorted brooches, pendants, earrings and further items, bangle inner diameter 6.25cm (qty)
A mid 19th century cameo bangle, the oval shell cameo carved to depict the portrait profile of a bearded gentleman, signed Saulini F possibly for Tommaso Saulini, to a hinged tapered bangle applied with textured scrolling foliage, cased, cameo dimensions 4.95cm length x 3.65cm width, bangle inner diameter 6.55cm Please note that it is not known whether the signature is original to the cameo or later applied. We are therefore unable to confirm whether the cameo was carved by Saulini.Several hairline fractures to cameo, with surface wear throughout and small nicks/chips to high points of the carved decoration. The cameo mount and bangle have general surface wear, scuffs and nicks/chips, with occasional shallow dings/dents and patchy tarnishing/staining, with traces of verdigris. The clasp is tight fitting. The reverse of the cameo mount and an area to the bangle interior have some deep scuffs/filing marks. The cameo mount and bangle are untested as gold/gilt metal and could be a combination of both, or a combination of different metal standards. The bangle tapers in width from 3.65cm at the shoulders to 2.05cm at the back and the cameo mount measures 5.55cm in length. Gross weight approximately 62.5gm. The case has considerable wear, with tears and losses to the interior lining and part of the fastener is missing.
A Victorian enamel locket pendant, the oval locket with blue, red and white enamel monogram and interior glazed compartment, suspended from a snake-link chain, together with a Victorian gilt metal bangle, centred with a circular boss and applied with bead and ropetwist wirework borders, and an enamel panel brooch, depicting a mountainous lake scene, (damaged), pendant length 4cm (3)Approximate gross weights only: locket 14gm (possibly gold mounted but untested as such), snake chain 11gm (possibly gilt metal), bangle 15.5gm, brooch 13gm
A quantity of mainly silver and white metal jewellery to include a silver bangle with Egyptian design, makers initials V&S (possibly Vaughton & Sons), a silver and blue morpho pendant, a Thai silver Niello brooch, ring and earrings, a Thai silver octagonal engraved locket stamped 925, a silver gilt cartwheel form pendant with central amethyst coloured cabochon, a silver gilt tri-tone plaited bracelet stamped 925, a white metal watch chain with makers initials SS and a silver watch chain, various dress rings to include a silver and rainbow moonstone example and mixed earrings. Location:R2.4
Victorian and later costume jewellery, mainly brooches and pendants to include a Scottish white metal and amber cabochon brooch, an engraved gold tone bangle with safety chain, Austrian crystal cluster earrings, a vintage amber necklace, a Czechoslovakian foil-glass bead necklace, clips, pin badges, buckles and necklaces. Location:BWR
Loading...
