MERIDEN MANUFACTURING CO., USA A RARE .50 (SPENCER) TWIST-ACTION REPEATING RIFLE, MODEL 'TRIPLETT & SCOTT', no visible serial number, manufactured 1864-65, with 30in. round barrel, pinched blade fore-sight, elevating ladder rear-sight, slab-sided rounded-top and bottom, the breech side marked 'KENTUCKY', slab-sided central hammer, the receiver signed 'MERIDEN MAN.FG. CO., MERIDEN, CONN.', the top-tang marked 'TRIPLETT & SCOTT PATENT DEC. 6 1864' and mounted with the barrel-release button, automatic trapdoor for the concealed tubular magazine in the butt (closure spring at fault), walnut butt-stock with iron heel-plate (crack at right hand side of head), sling swivels mounted at heel and toe and walnut splinter fore-end with singular iron barrel-band, a strong amount of colour and finish remaining, overall length 46in., weight approximately 8 1/4lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
We found 150142 price guide item(s) matching your search
There are 150142 lots that match your search criteria. Subscribe now to get instant access to the full price guide service.
Click here to subscribe- List
- Grid
-
150142 item(s)/page
JAS. KERR TRADING AS THE LONDON ARMOURY CO. A .577 (SNIDER) SERVICE-RIFLE, MODEL 'VOLUNTEER SNIDER THREE-BAND', serial no. L2329 (25), circa 1860, with 36 1/2in. barrel, block and blade fore-sight, elevating ladder rear-sight, commercial proofs, flip open breech-block with sprung thumb-catch, the top of block marked variously '3', 'SNIDER'S PATENT' with an arrow trademark, 'L.A.C.' and 'LONDON ARMOURY', plain bar-action lock marked with a 'V.R.' crown device at tail and signed 'JAS KERR & CO, 54 KING WILLIAM ST. E.C.' below 'L.A.C.', chequered walnut three-quarter stock (butt holed on right face with internal cavity), brass heel-plate, trigger-guard and nose-cap, three iron barrel-bands and iron jag-ended clearing rod, the whole coated in a lacquer preservative with some staining. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament * Please note this item is subject to 5% VAT on the hammer price.
KELLER A AARAU, SWITZERLAND A SCARCE 10.4mm (VETTERLI) BOLT-ACTION REPEATING SERVICE-RIFLE, MODEL 'M1869 VETTERLI', serial no. 9213, early production circa 1870 with octagonal to round 33 1/4in. blued barrel, block and blade fore-sight, elevating tangent rear-sight, tubular bolt housing with turned down bolt handle and sliding dust-cover, side loading with hinged gate, walnut butt-stock and three-quarter length chequered walnut fore-end with concealed magazine and two iron barrel-bands, spurred trigger-guard and nose-cap with iron under-barrel clearing rod, some staining, 51 1/4in. overall, weight approximately 10 1/2lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament * Please note this item is subject to 5% VAT on the hammer price.
AN 11.53mm (ALBINI-BRAENDLIN) BREECH-LOADING SERVICE-RIFLE, UNSIGNED, MODEL 'ALBINI BRAENDLIN', serial no. 863, Belgian, dated for 1868, with 34 3/4in. barrel, block and blade fore-sight, elevating ladder rear-sight with auxiliary volley-sight, front hinged trap-door action with rear-mounted central striking hammer, plain walnut full-stock with iron furniture, two barrel-bands, iron nose-cap with iron clearing rod and bayonet lug to underside of muzzle, fitted with a later leather sling, heavy surface staining with some pitting throughout, overall length 53 1/4in., weight approximately 10 1/4lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
REMINGTON, USA AN 11.4x57mmR (.43 SPANISH) SINGLE-SHOT SERVICE RIFLE, MODEL '1879 ARGENTINE CONTRACT ROLLING BLOCK', no visible serial number, circa 1880, with two-stage reblued 36in. barrel, block and blade fore-sight, elevating ladder rear-sight, the top-flat of the octagonal section marked 'MODELO ARGENTINO. 1879 E.N.', reblued slab-sided action with central rolling breech and hammer, walnut straight hand butt-stock (minor repairs and damage at head), blued iron furniture including three barrel-bands, walnut three-quarter fore-end and brushed bright jag-ended iron clearing-rod. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
SPRINGFIELD ARMORY, USA A 50-70 SINGLE-SHOT SERVICE-RIFLE, MODEL'1868 TRAPDOOR', serial no. 39961, for between 1868-72, with round 32 1/2in. barrel, block and blade fore-sight, folding ladder rear-sight, top of breech-block dated '1870' and marked with an eagle's head above crossed arrows and 'U.S', 'Allin' closure catch, plain top-tang, plain lock of civil war style dated 1863 on the tail and marked 'U.S. SPRINGFIELD' together with an eagle and shield device forwards of the hammer, walnut three-quarter stock, iron furniture and flat-tipped jag-ended clearing-rod, some surface corrosion spotting and staining, 51 1/2in. overall, weight approximately 9lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
WINCHESTER REPEATING ARMS, USA A GOOD .45-75 LEVER-ACTION SPORTING-RIFLE, MODEL '1876', serial no. 51935, for 1884, with blued 28in. octagonal barrel (finish faded, some patchy staining), the top-flat marked 'WINCHESTER'S REPEATING ARMS NEW HAVEN CT.' over 'KINGS IMPROVEMENT PATENTED MARCH 29 1866 OCTOBER 16 1860', dove-tailed blade fore-sight, buckhorn rear-sight, calibre designation at breech, blued receiver with sliding dust-cover (strong amount of finish remaining), colour hardened hammer, model designation to top-tang, walnut straight hand butt-stock with crescent heel-plate, colour hardened finger-lever, brass lifter engraved with the calibre, walnut for-end and full-length under-barrel magazine tube, overall length 49 1/4in., weight approximately 9 3/4lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
A SCARCE 7.5x53 (SWISS) STRAIGHT-PULL CAVALRY CARBINE, UNSIGNED, MODEL 'SYSTEM MANNLICHER M93', serial no. 6164, circa 1895, with concealed 22 1/2in. barrel, protected fore-sight, elevating rear-sight with folding blade, blued receiver with straight-pull bolt, walnut full-stock, iron furniture, round profile fore-end and top-cover, matching number detachable magazine and a strong amount of finish remaining, complete with period leather sling. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament * Please note this item is subject to 5% VAT on the hammer price.
WINCHESTER REPEATING ARMS, USA A 10-BORE (2 5/8in.) LEVER-ACTION REPEATING SHOTGUN, MODEL '1901', serial no. 74339, for 1893, with 32in. barrel marked with the makers address and patent details together with 'MODEL 1901 10 GA' at breech, slab-sided receiver engraved with the 'W.R.A.' monogram, tilting breech-block and central hammer operated by a finger lever, top-tang marked with 'REG IN U.S. PAT OFF' over 'WINCHESTER' over 'TRADE MARK', walnut semi pistol grip butt-stock with chequered iron heel-plate, exposed under-barrel half-magazine and smooth wood side fillets in lieu of fore-end, strong traces of original finish remaining. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
J. STEVENS, USA A .32 (RIMFIRE) TAKE-DOWN SHORT POCKET-RIFLE, MODEL 'HUNTER'S PET No. 34', serial no. 4523, circa 1895, with two-stage reblued 18in. barrel, tunnel fore-sight with moulded blade to top, elevating folding aperture sight forward of breech, the left hand side top-flat signed 'J. STEVENS A & T CO.' over 'CHICOPEE FALLS MASS. USA PAT. SEPT 6 1864', push-button barrel release to left side of frame, external hammer with firing pin bushed in frame, moulded and rounded iron receiver with spur trigger, smooth flared walnut grips, the back-strap with threaded aperture and the heel cut with a dove-tail to accept a nickel-plated wire skeleton stock (present, matching number), 32in. overall with stock fitted, weight approximately 4 1/2lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
WESTLEY RICHARDS & CO., LONDON A GOOD .300 (ROOK) SINGLE-SHOT ROOK & RABBIT RIFLE, serial no. 4616, circa 1895, with blued octagonal 26 1/2in. barrel, dove-tailed bead fore-sight, standing notch rear-sight with two additional folding leaves, the matted sighting plane marked with a triangle trademark at breech, the left hand top-flat marked 'WESTLEY RICHARDS & CO, LONDON' and 'FOR .300 CARTRIDGE', plain slab-sided colour hardened receiver, the left face marked with the same address, side-lever opening, central hammer, chequered walnut straight-hand butt-stock ribbed at heel, guarded trigger and chequered walnut snap-on splinter fore-end, much original finish remaining, weight approximately 4 3/4lbs., overall length 42 3/4in.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
WESTLEY RICHARDS & CO. A .577 (3IN.) CORDITE 'MODEL 1897' TAKE-DOWN FALLING-BLOCK SPORTING RIFLE, serial no. 34459, circa 1902, 27in. detachable cordite proof barrel of rarer octagonal form, incorporating patent no. 9711 of 18th May 1894, use number 340, with the Westley triangle at the breech end, file cut top flat with ornately decorated best quality block-mounted open sights with white metal sight lines and marked for 100, 200 and 300 yds. (for the Indian market), the block with scroll and matt detailing with engraved shell designs to the top, block mounted bead fore-sight with flip-up moonsight and folding protector hood, the left side of the barrel engraved 'WESTLEY RICHARDS & CO. LONDON.', 'FOR 3IN. CASE .577 BORE', the right side with ''W.R. PATENT DETACHABLE BARREL 340', L. B. Taylor patent automatic tang safety, patent no. 10068 of 24th May 1894, use number 221, with gold-inlaid 'SAFE' detail, cranked underlever, acanthus scroll border engraving, the left side with the makers name in a scrolling banner, brushed finish, 14in. well-figured pistolgrip stock with engraved steel pistolgrip-cap (with trap), sling swivels and including 3/4in. distressed rubber recoil pad, fore-end with Deeley & Edge patent release and horn finial, the fore-end iron marked 'PATENT 9711', weight 9lbs. 1oz.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament * Please note this item is subject to 5% VAT on the hammer price.
J. STEVENS, USA A .32 (RIMFIRE) TAKE-DOWN SHORT POCKET-RIFLE, MODEL 'NEW MODEL POCKET-RIFLE', serial no. 8417, circa 1890, with two-stage 15in. barrel (traces only of original finish), tunnel fore-sight with moulded blade to top, elevating buckhorn rear-sight forward of breech with elevating blade, the left hand side top-flat signed 'J. STEVENS & CO. CHICOPEE FALLS MASS. PAT. SEPT 6 1864', push-button barrel release to left side of frame, external hammer with firing pin bushed in frame, moulded and rounded nickel-plated iron receiver with spur trigger (much plating remaining), smooth flared walnut grips, the back-strap with threaded aperture and the heel cut with a dove-tail to accept a nickel-plated wire skeleton stock (present, matching number), 28 3/4in. overall with stock fitted, weight approximately 2 1/4lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
A .360 NEEDLE-FIRE SINGLE-SHOT SCREW-BREECH SPORTING-RIFLE, UNSIGNED, no visible serial number, Belgian made circa 1870, with 26 1/2in. octagonal multi-grooved rifled barrel, dove-tailed bead fore-sight, rear-sight of one standing and one folding leaf, borderline and scroll engraved action, chequered spatulate bolt-handle, central hammer with replaceable needle, walnut butt-stock with chequered straight wrist, no provision for fore-end, 43in. overall, weight approximately 5lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
WINCHESTER REPEATING ARMS, USA A GOOD .38-56 (WCF) LEVER-ACTION SPORTING-RIFLE, MODEL '1886', serial no. 19787, for 1889, with blued octagonal 26in. barrel, the top-flat signed 'MANUFACTURED BY THE WINCHESTER REPEATING ARMS CO. NEW-HAVEN CONN. U.S.A', nickel bladed fore-sight, buckhorn rear-sight, slab-sided receiver (slight traces of colour), blued bolt and hammer, top-tang marked 'MODEL 1886', walnut straight-hand butt-stock with iron crescent heel-plate, iron finger-lever (slight traces of colour), walnut fore-end and colour hardened nose-cap (faded), fitted with a full-length tubular under-barrel magazine, overall length 45in., weight approximately 9 3/4lbs., with a factory letter. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
WINCHESTER REPEATING ARMS, USA A 10-BORE LEVER-ACTION REPEATING SHOTGUN, MODEL '1887', serial no. 23755, for 1889, with 32in. barrel marked with the gauge at breech, slab-sided receiver engraved with the 'W.R.A.' monogram, tilting breech-block and central hammer operated by a finger lever, plain top-tang, walnut semi pistol grip butt-stock with chequered iron heel-plate, exposed under-barrel magazine and smooth wood side fillets in lieu of fore-end, a fair amount of original finish remaining, weight approximately 8lbs., overall length 49 3/4in., with a factory letter. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
E. REMINGTON, USA AN 11mm X 50R (.43 EGYPTIAN) SERVICE-RIFLE, MODEL 'CONTRACT ROLLING-BLOCK', no visible serial number, circa 1885, with blued 35in. barrel, block and blade fore-sight, elevating ladder rear-sight, blued rolling-block action with central hammer, walnut butt-stock and three-quarter fore-end, iron furniture including heel-plate, three iron barrel-bands, nosecap and jag-ended clearing-rod, some areas of pitting near muzzle, old crack at hand, 50 1/2in. overall, weight approximately 9 1/4lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
WINCHESTER REPEATING ARMS, USA A RARE EARLY .44 (HENRY RIM) LEVER-ACTION CARBINE, MODEL '1866 FIRST MODEL', serial no. 14157, for 1866, with 20in. unsigned barrel (traces of the 'King's Improvement' details), small double notch folding rear-sight, fore-sight integral with the barrel-band, brass receiver of 'Henry' form with pronounced step forwards of the hammer, flat faced loading-gate with long spring and twin fixing screws, the top-tang with early two-screw fitment, saddle-ring to left hand side, walnut butt-stock (concealing the serial number) with period working repair at wrist, crescent heel-plate with central trap-door, iron under-lever with small finger-loop, walnut fore-end, iron barrel-band and full length magazine with flush end-plug. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
WINCHESTER REPEATING ARMS, USA A .45-75 (WIN) LEVER-ACTION SPORTING-RIFLE, MODEL '1876', serial no. 6667, for 1878, with round 28in. barrel (finish darkly stained), the top marked 'WINCHESTER'S REPEATING ARMS NEW HAVEN CT.' over 'KINGS IMPROVEMENT PATENTED MARCH 29 1866 OCTOBER 16 1860', dove-tailed blade fore-sight, buckhorn rear-sight with ladder and elevator, no calibre designation at breech or on lifter, receiver with chequered oval thumb-piece to the sliding dust-cover, exposed hammer, model designation to top-tang, walnut straight hand butt-stock with crescent heel-plate, iron finger-lever, brass lifter, walnut for-end and full-length under-barrel magazine tube, overall length 49 1/4in., weight approximately 9 3/4lbs., with a factory letter. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
J.D. DOUGALL, GLASGOW A RARE .577 (SNIDER) RIFLE, MODEL 'BARDELL'S & POWELL'S PATENT SNIDER THREE-BAND', serial no. 14/26, circa 1870, with blued 36 3/4in. barrel marked 'J.D. DOUGALL, GLASGOW', block and blade fore-sight, elevating ladder rear-sight, flip-open breech-block marked 'SNIDER'S PATENT', commercial style chequered thumb-piece and also numbered 'Y.No 26', plain colour hardened bar-action lock with unusual elongated tail signed 'BARDELL'S & POWELL'S PATENT No.14', flat-faced rebounding hammer (of same patent), walnut full-stock with brass furniture except three iron barrel-bands and jag-ended clearing-rod. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
AN 11.53mm (ALBINI-BRAENDLIN) BREECH-LOADING SERVICE-RIFLE, UNSIGNED, MODEL 'ALBINI BRAENDLIN', serial no. 832, Belgian, dated for 1868, with 34 3/4in. barrel, block and blade fore-sight, elevating ladder rear-sight with auxiliary volley-sight, front hinged trap-door action with rear-mounted central striking hammer, plain walnut full-stock with iron furniture, two barrel-bands, iron nose-cap with iron clearing rod and bayonet lug to underside of muzzle, traces of finish, overall length 53 1/4in., weight approximately 10 1/4lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
A .577 (SNIDER) BREECH-LOADING RIFLE, UNSIGNED, MODEL 'TWO-BAND SNIDER', serial no. 141, circa 1865, with blued 30 1/2in. barrel, block and blade fore-sight, elevating ladder rear-sight, flip open breech with shaped solid thumb-piece, the block marked 'SNIDER'S PATENT', plain bar-action lock and hammer, walnut full-stock with brass furniture except two iron barrel-bands and jag-ended underbarrel clearing rod, overall length 49 1/4in., weight approximately 8 1/2lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
WINCHESTER REPEATING ARMS, USA A GOOD 32-40 (W&B) LEVER-ACTION SPORTING-RIFLE, MODEL '1894', serial no. 101909, for 1897, with blued 26in. round barrel, the top-flat marked 'MANUFACTURED BY THE WINCHESTER REPEATING ARMS CO. NEW HAVEN CONN U.S.A.', dove-tailed blade fore-sight, buckhorn rear-sight, calibre designation at breech, blued receiver with the majority of original finish remaining, colour hardened hammer, model designation to top-tang, walnut straight hand butt-stock with crescent heel-plate, colour hardened finger-lever, walnut for-end and full-length under-barrel magazine tube, overall length 44 3/4in., weight approximately 7 1/2lbs., with a factory letter. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
STARR ARMS, USA A .52 RIMFIRE BREECH-LOADING SINGLE-SHOT CARBINE, MODEL '1858 CARBINE BRITISH ISSUE', serial no. 36619, circa 1862, with round tapering 21in. barrel signed 'STARR ARMS CO, YONKERS N.Y.', dove-tailed blade fore-sight, folding notch and 'battle' sight, 'sold out of service' arrows at breech, square receiver with falling-block mechanism and saddle-ring mounted to left hand side, plain top tang, the back-action lockplate signed 'STARR ARMS CO, YONKERS N.Y.', straight slab-sided hammer, walnut straight-hand butt-stock with US martial cartouches at head and a broad arrow and 'W.D.' stamp to right side of butt, splinter fore-end, iron heel-plate and barrel-band and iron underlever forming the trigger-guard, overall length 38in., weight approximately 7 1/2lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
WINCHESTER REPEATING ARMS, USA A .45-75 (WIN) LEVER-ACTION SPORTING-RIFLE, MODEL '1876', serial no. 6258, for 1878, with octagonal 26in. barrel (traces of finish), the top marked 'WINCHESTER'S REPEATING ARMS NEW HAVEN CT.' over 'KINGS IMPROVEMENT PATENTED MARCH 29 1866 OCTOBER 16 1860', dove-tailed folding ring fore-sight, ladder rear-sight with elevator, no calibre designation at breech or on lifter, receiver with chequered oval thumb-piece to the sliding dust-cover (stronger traces of finish), exposed hammer, model designation to top-tang, walnut straight hand butt-stock with crescent heel-plate, iron finger-lever, brass lifter, walnut fore-end and full-length under-barrel magazine tube, overall length 47in., weight approximately 9 1/2lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
J. STEVENS, USA A .32-40 (W&B) SINGLE-SHOT RIFLE, MODEL 'IDEAL RIFLE 44', serial no. 11752, circa 1900, with 26in. half round half octagonal blued barrel of No2. weight, 'rocky mountain' fore-sight, buck-horn rear-sight, the left rear flat of breech marked with the calibre, the right 'J. STEVENS A & T CO, CHICOPEE FALLS MASS USA', colour hardened slab-sided receiver with central falling breech and hammer, folding vernier tang sight to wrist, walnut butt-stock with crescent heel-plate (originally nickel-plated), finger-lever forming the trigger-guard, walnut splinter fore-end with schnabel tip, much original finish remaining throughout, overall length 42in., weight approximately 7 1/2lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
WINCHESTER REPEATING ARMS, USA A .40-70 (WCF) LEVER-ACTION SPORTING-RIFLE, MODEL '1886', serial no. 93016, for 1894, with octagonal 26in. barrel, the top-flat signed 'MANUFACTURED BY THE WINCHESTER REPEATING ARMS CO. NEW-HAVEN CONN. U.S.A', nickel bladed fore-sight, buckhorn rear-sight, slab-sided receiver (slight traces of colour), blued bolt and hammer, top-tang marked 'MODEL 1886', walnut straight-hand butt-stock with iron crescent heel-plate (small losses and repaired cracks at head), iron finger-lever (slight traces of colour), walnut fore-end and blued nose-cap, fitted with a full-length tubular under-barrel magazine, overall length 45in., weight approximately 9 3/4lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
WATSON BROS, LONDON A .360 (No.5) SINGLE-SHOT ROOK & RABBIT RIFLE, MODEL 'THE ECLIPSE', serial no. 4193, built on Comblain's patent circa 1885, with blued round 28in. barrel, flat matted sighting plain with dove-tailed fore-sight and dove-tail for rear-sight (sight absent), the sighting plane signed near breech 'WATSON BROS 4 PALL MALL, LONDON', side of breech marked 'HENRY'S RIFLING', slab-sided falling block action, the left face engraved 'THE ECLIPSE' (traces of colour), central exposed hammer, straight angled trigger, the trigger-guard bow forming the opening lever, chequered pistol-grip walnut butt-stock with roll engraved iron heel-plate and gadrooned horn grip-cap, chequered walnut splinter fore-end and rounded horn tip, overall length 43 1/4in., weight approximately 5lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
WINCHESTER REPEATING ARMS, USA A .40-82 (WCF) LEVER-ACTION SPORTING-RIFLE, MODEL '1886', serial no. 30280, for 1889, with blued octagonal 26in. barrel, the top-flat signed 'MANUFACTURED BY THE WINCHESTER REPEATING ARMS CO. NEW-HAVEN CONN. U.S.A', nickel beaded blade fore-sight, buckhorn rear-sight, slab-sided receiver (slight traces of colour), blued bolt and hammer, top-tang marked 'MODEL 1886', walnut straight-hand butt-stock with iron crescent heel-plate, iron finger-lever (slight traces of colour), walnut fore-end and colour hardened nose-cap (faded), fitted with a full-length tubular under-barrel magazine, overall length 45in., weight approximately 9 3/4lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
S. GRANT A .360 (ROOK) SINGLE-SHOT SIDELEVER HAMMER ROOK & RABBIT RIFLE, serial no. 210, circa 1870, 25in. octagonal black powder only barrel, with matted sight flat engraved 'S. GRANT. 67A ST. JAMES' STREET. LONDON.', dove-tailed bead fore-sight, standing notch rear-sight with two folding leaf sights marked 50, 80 and 100 yards and with white-metal inlaid sight-lines, blued non rebounding central hammer, side-lever, border and acanthus scroll engraving retaining traces of colour-hardening and finish, 14 1/4in. figured pistolgrip stock including steel buttplate, smooth horn pistolgrip cap, splinter fore-end with horn finial and cross-pin release catch, weight 5lbs. 9oz.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
WINCHESTER REPEATING ARMS, USA A 50-110 (WCF) LEVER-ACTION SPORTING-RIFLE, MODEL 'ENGLISH MODEL 1886', serial no. 152236A, for 1912, with blued round 25 7/8in. barrel, the top signed 'MANUFACTURED BY THE WINCHESTER REPEATING ARMS CO. NEW-HAVEN CONN. U.S.A' and with patent dates to Jan. 20 1885, nickel beaded fore-sight, scarce short express three-leaf rear-sight, slab-sided receiver (traces of colour), blued bolt and hammer, top-tang marked 'MODEL 1886', 'WINCHESTER' and 'TRADE MARK REG. IN. U.S. PAT. OFF.', walnut straight-hand butt-stock with iron shotgun heel-plate, iron finger-lever (strong traces of finish), walnut fore-end and blued nose-cap, fitted with a half-length tubular under-barrel magazine, overall length 44 1/4in., weight approximately 8 1/2lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
WINCHESTER REPEATING ARMS, USA A .40-65 (WCF) LEVER-ACTION SPORTING-RIFLE, MODEL '1886', serial no. 36954, for 1889, with blued round 26in. barrel, the top signed 'MANUFACTURED BY THE WINCHESTER REPEATING ARMS CO. NEW-HAVEN CONN. U.S.A', nickel bladed fore-sight, buckhorn rear-sight, slab-sided receiver (lightly cleaned, some colour), blued bolt and hammer, top-tang marked 'MODEL 1886', walnut straight-hand butt-stock with iron crescent heel-plate, iron finger-lever (slight traces of finish), walnut fore-end and blued nose-cap, fitted with a full-length tubular under-barrel magazine, overall length 45in., weight approximately 9 3/4lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
GWYN & CAMPBELL, USA A .52 CAL PERCUSSION SINGLE-SHOT BREECH-LOADING CARBINE, MODEL 'UNION RIFLE', serial no. 4264, early type circa 1863, with blued 20in. octagonal to round barrel, applied fore-sight, ladder rear-sight, squared receiver marked 'UNION RIFLE' on the right, plain back-action lock signed 'GWYN & CAMPBELL PATENT 1862 HAMILTON O.' and with large elongated hammer, walnut butt-stock with clear martial cartouche at head, iron crescent heel-plate and 'grapevine' under-lever, no provision for fore-end, the whole retaining the majority of its original finish and colour throughout. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
WINCHESTER REPEATING ARMS, USA A .25-20 (SINGLE-SHOT) SPORTING-RIFLE, MODEL '1885 LOW-WALL', serial no. 112697, for 1919, with 24in. octagonal barrel signed by the maker on the left hand top-flat and with patents to 1879, dove-tailed blade fore-sight, buckhorn rear-sight, calibre designation near breech, slab-sided receiver with central falling breech-block and hammer, top-tang marked 'REG. IN U.S. PAT OFF. WINCHESTER TRADE MARK', walnut butt-stock with crescent heel-plate, under-lever opener forming the trigger-guard and walnut splinter fore-end with inlet ebony tip, the whole lightly cleaned of finish, overall length 40 5/8in., weight approximately 6 1/2lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
CHILEAN COMBLAIN AN 11x50R SINGLE-SHOT FALLING-BLOCK SPORTING-RIFLE, UNSIGNED, MODEL 'M84 COMBLAIN PATENT', serial no. 67337, built on Comblain's patent circa 1888, with blued round 32 3/4in. barrel, block and blade fore-sight and ladder rear-sight, the octagonal breech section with Belgian proofs, borderline and scroll engraved slab-sided falling block action, (strong amount of colour), central exposed hammer, straight angled trigger, the trigger-guard bow forming the opening lever, chequered straight-hand walnut butt-stock with iron heel-plate, chequered walnut semi beaver-tail half fore-end with rounded horn tip and full length under-rib with iron clearing-rod, overall length 48in., weight approximately 8 1/2lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
WEBLEY, BIRMINGHAM A RARE .500/450 SINGLE-SHOT MATCH-RIFLE, MODEL 'WEBLEY-WYLEY', no visible serial number, circa 1885, with in the white round 30in. barrel, block with inlet for fore-sight (sight absent), standing notch rear-sight with additional folding leaf, slab-sided receiver with sideways hinged breech and semi concealed central hammer within the feed-ramp, walnut pistol-grip butt-stock bearing a Small Arms School collection plaque and semi beavertail walnut fore-end, the whole possibly a prototype, 47in. overall, weight approximately 8lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
E. REMINGTON & SONS, USA A RARE .44-90 SINGLE-SHOT MATCH RIFLE, MODEL 'No.3 LONG RANGE CREEDMORE REMINGTON-HEPBURN', serial no. 2892, manufactured between 1880-1907, with 34in. blued round barrel with octagonal breech section signed 'E. REMINGTON & SONS. ILION. N.Y.' and marked on the underside '44.2 4/10' , modern tunnel fore-sight (evidence of block-mounted rear-sight in front of signature), falling block action with central hammer, single trigger and traces of original case-hardened finish, the upper tang mounted with modern vernier target sight, deluxe figured pistol-grip stock with chequered grip and fore-end, the heel with second mounting base for the vernier sight, horn butt-plate and fore-end cap, 50 1/2in. overall, weight approximately 9 3/4lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
HOLLAND & HOLLAND A .360 (ROOK) THOMAS 1871 PATENT SINGLE-BARRELLED TOPLEVER HAMMER ROOK RIFLE, serial no. 6609, for 1881, 28 1/4in. black powder only octagonal barrel with file cut top flat, open sights with three folding leaf sights, white metal inlaid sight lines and marked '50', '100', '150' and '200', bead fore-sight, the sides engraved 'HOLLAND & HOLLAND' to the left and '98. NEW BOND ST.. LONDON.' to the right, some external pitting, offset toplever, carved percussion fence, rebounding back-action lock with high spurred hammer (catching fence), action with John Thomas patent barrel bolting mechanism, patent no. 3091 of 15th November 1871, fine border and acanthus scroll engraving, retaining traces of original finish (some exterior rusting in places), 14 3/4in. figured pistolgrip stock with steel pistolgrip-cap and buttplate, fore-end with crosspin release (crosspin escutcheons rusted), and repaired horn finial, weight 5lb. 9oz.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
PRESENTED TO H.H. THE NIZAM OF THE DECCAN BY H.R.H. THE PRINCE OF WALES J. PURDEY A .360 BLACK POWDER EXPRESS DOUBLE-BARRELLED ROTARY-UNDERLEVER HAMMER RIFLE, serial no. 9165, for 1875, 27in. black powder only damascus barrels, the rib engraved 'J. PURDEY 314 1/2, OXFORD STREET, LONDON. TO H.H. THE NIZAM OF THE DECCAN. FROM H.R.H. THE PRINCE OF WALES. K.G. G.C.S.I. 1876', open sights and two folding leaf sights with white metal sight lines and marked '50', '100' and '150', Jones patent rotary-underlever, carved percussion fences, non-rebounding back-action locks with carved bolted hammers, fine acanthus scroll engraving, retaining traces of original colour-hardening and finish, 14 1/2in. well-figured stock with cheekpiece, sling eyes and steel buttplate, large gold escutcheon engraved with the Prince of Wales crest, diminutive fore-end with cross-pin release and horn finial, weight 7lbs. 11oz., in its re-lined brass-cornered oak and leather case with lift-out tray and provision for cartridge storage, with assorted associated reloading tools and the lid outer marked 'H.H. THE NIZAM 360 EXPRESS'. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
SHARP & HANKINS, USA A .32 (SHORT RIMFIRE) FOUR-SHOT POCKET-PISTOL, MODEL '3B', serial no. I11279, circa 1875, with slide forwards 3 1/2in. barrel group, the sunken top-plane signed 'ADDRESS SHARPS & HANKINS, PHILADELPHIA, PENN', no provision for extractor, open frame with button barrel release catch on the left hand side, the right hand side marked 'C. SHARPS PATENT JAN 25 1859', forward frame screw, external hammer with rotating striker, spur trigger and smooth walnut grips, strong traces of finish. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
A .380 PINFIRE SINGLE-SHOT POCKET-PISTOL, UNSIGNED, serial no. 41, French circa 1850, with round brushed bright tapering 2 3/4in. break-open rifled barrel, St. Etienne proofs, squared borderline and checkerboard engraved open iron action featuring central panels of American scrollwork and stars at the intersection of each checker, central hammer, Lefaucheux forward-facing swing under-lever opening, walnut fluted grip with mouldings at the head and faceted iron pommel with ball finial, concealed automatic trigger, overall length 7 1/4in.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
COLT USA A .41 RIMFIRE VEST-PISTOL, MODEL 'COLT'S No.3 THUER PATENT DERRINGER, serial no. 3254, circa 1880, with round, plated 2 1/2in. barrel signed 'COLT', (small losses to plating), plain nickel-plated frame retaining much of its original nickel plate (some light scratches), rosewood birdshead grips, exposed hammer and sheathed trigger. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament * Please note this item is subject to 5% VAT on the hammer price.
A .44 PINFIRE REVOLVER, UNSIGNED, MODEL 'SYSTEM LEFAUCHEUX', serial no. 281, Almost certainly produced in Belgium but with Birmingham proved octagonal 4 1/2in. barrel, dove-tailed fore-sight, plain cylinder with arabesque scroll engraving over each of the six chambers, borderline engraved open iron frame with further arabesque scroll engraved accents, external sear spring, spurred double-action only hammer, guarded trigger, plunge ejector, chequered walnut bag-shaped grips and lanyard ring at heel, minimal traces of finish, 10 1/2in. overall, weight approximately 1 3/4lbs.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
COLT, USA A .30 (RIMFIRE) FIVE-SHOT VEST-REVOLVER, MODEL 'NEW-LINE', serial no. 9695, for 1876, with blued tapering round 2 3/16in. barrel signed by the maker on two lines, solid frame, fluted cylinder central hammer with single-action spur trigger and smooth wood birdshead grips, traces of finish with some pitting. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
L. POND, USA A .30 TEAT-FIRE FRONT-LOADING SIX-SHOT CARTRIDGE REVOLVER, serial no. 1164, circa 1865, with 5in. octagonal barrel signed by the maker and with patents to 1864, plain blind-ended cylinder with removable inserts (some frozen), brass frame, central hammer and sheath trigger, smooth walnut flared grips with detachable ejector rod mounted in the heel, 10 1/8in. overall. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
PERRIN. FRANCE A 9mm (FRENCH THICK-RIM) DOUBLE-ACTION REVOLVER SIGNED PERRIN, serial no. 121, circa 1875, with 3 7/8in. sighted barrel, moulded iron solid frame with gate-loading stepped six-shot cylinder, smooth walnut grip with lanyard ring at heel and guarded trigger, slight traces of finish, hammer spur tip broken short, 9in. overall. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
HOPKINS & ALLEN, USA A .38 RIMFIRE POCKET-REVOLVER, MODEL 'XL No.4 N.Y.', serial no. 594, circa 1876, with 2 1/2in. octagonal barrel, the top-flat signed 'HOPKINS & ALLEN MFG CO., PAT MAR 28 1871', the top-strap marked 'X.L. No.4 N.Y.', solid frame with rounded action body, fluted cylinder, colour hardened hammer and spur-trigger, smooth hardwood birdshead grips, the whole retaining much original nickel-plated finish, 7in. overall. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
SMITH & WESSON, USA A .32 RIMFIRE SIX-SHOT SINGLE-ACTION REVOLVER, MODEL 'No.2 OLD MODEL ARMY', serial no. 46925, circa 1868, with octagonal 6in. tip-up barrel, raised sighting rib signed 'SMITH & WESSON, SPRINGFIELD MASS.', applied nickel fore-sight, fixed ejector-pin beneath the barrel, three pin cylinder lock, plain cylinder, plain iron frame, central hammer and spur trigger, smooth flared walnut grips, strong amount of finish but with staining to the left side of barrel. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
REMINGTON ARMS CO., USA A .41 RIMFIRE OVER-UNDER DERRINGER PISTOL, serial no. 594, type II (or model 3) variation for between 1888-1911, with nickel-plated 3in. barrels (hinge repaired), raised rib with integral fore-sight, the rib signed 'REMINGTON ARMS CO. ILION N.Y., plated receiver with blued barrel lock and spur trigger, central hammer and chequered hard-rubber semi birdshead grips, much plated finish remaining, 5 1/4in. overall, complete with a later leather holster. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
MOORE'S PATENT FIRE ARMS CO., USA A CASED .38 (TEATFIRE) POCKET-REVOLVER, MODEL 'D. WILLIAMSON'S PATENT TEATFIRE', serial no. 4626, circa 1866, with round 3 1/4in. barrel, signed 'MOORES PAT FIRE ARMS CO BROOKLYN N.Y.', border engraved muzzle, starburst to throat, American border and scroll engraved frame, plain cylinder, exposed hammer, spur trigger, walnut birdshead grips, the whole re-nickel plated in a competently produced cedarwood storage case lined in red velvet and with provision for ammunition. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
MASU, LONDON A CASED 7mm TWELVE-SHOT PINFIRE POCKET-REVOLVER, no visible serial number, circa 1865, with blued round 4 3/4in. barrel, the top of breech signed 'MASU. LONDON', dove-tailed fore-sight, rear-sight notch to the hammer nose, blued fully fluted cylinder, Birmingham proofs, blued open iron frame, double action mechanism with guarded trigger, chequered walnut bag-shaped grips and lanyard ring at heel, retaining much original finish throughout and complete in a period English market mahogany case lined and compartmented in green baize, reproduction 'MASU' trade label inside lid and containing an oil bottle and brass cleaning rod along with an ammunition tray containing some spent cases, lock escutcheon missing, overall length of revolver, 9 3/4in.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
A CASED 7mm PINFIRE PEPPERBOX POCKET-REVOLVER, UNSIGNED, serial no. 16, Belgian circa 1855, with 1 7/8in. fluted six-shot scratch-rifled barrel group, scroll engraving to the outside of each barrel, wingnut barrel release at front of the open iron frame, borderline and scroll engraving to the action body, spurless hammer with folding trigger and smooth bag-shaped ebony grips, complete in a probable period walnut case relined and compartmented in green baize and containing a period iron cleaning rod, overall length of revolver 5in.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
COLT, USA A CASED .41 RIMFIRE FOUR-SHOT POCKET-REVOLVER, MODEL 'CLOVERLEAF HOUSE PISTOL', serial no. 6166, for 1874, with reblued 3in. barrel signed 'COLT'S HOUSE PISTOL, HARTFORD CT. USA', reblued fully fluted cylinder, nickel-plated frame (much plating remaining), exposed hammer, spur-trigger, smooth rosewood birdshead grips and an under-barrel ejector rod, complete with a period English casing with burr walnut veneered lid (lock absent), the interior lined and compartmented in blue baize, original 'C.H. WESTON, BRIGHTON' card trade-label inside lid and containing a period turn-screw, overall length of revolver 7 1/4in.. Sold as an exempt item under Section 58 (2) of the 1968 Firearms Act, to be held as a curiosity or ornament
A BRASS-CORNERED OAK AND LEATHER TWO-TIER SINGLE GUNCASE, fitted for 30in. barrels, the interior lined with green baize, removable oak green baize-lined tray fitted for a take-down shotgun, the underside fitted for accessories, brass lock (key missing), the lid exterior with a central blank brass escutcheon. * Please note this item is subject to 5% VAT on the hammer price.
A VINTAGE BRASS-CORNERED OAK SINGLE GUNCASE, fitted for 30in. barrels, the interior lined with blue baize, a RichD Burnand trade label, two brass clasps, central lock (key missing), the lid exterior with a flush-fitting carry handle engraved with 'T. DIXON'. * Please note this item is subject to 5% VAT on the hammer price.
MONT BLANC, GERMANY A FINE CASED FOUNTAIN PEN, MODEL 'MIGUEL DE CERVATES WRITER'S EDITION', serial no. WE0042396, the brown marble lacquered body separated by regular platinum plated bands, segmented platinum plated clip and fitted with an 18K gold medium nib engraved with a windmill, unused and sealed in its polythene bag of issue and contained in a book-styled casing, the spine signed by the maker gold blocked with the model details, complete with outer card cartons (some storage wear to cartons). ** Please note this item is subject to 20% VAT on the hammer price.
A NEW AND UNUSED CASED PRESENTATION DELUXE GUN 12-BORE CLEANING KIT, consisting cleaning rod, cleaning heads, snap-caps, oil bottle, cartridge extractor, turnscrews, chamber brush, sectioned in a wooden case with brass fittings. †Please note this item is subject to 20% VAT on the hammer price.
WALTHER, GERMANY A RARE 27mm KRIEGSMARINE DOUBLE-BARRELLED FLARE-PISTOL, serial no. 1131, Kriegsmarine issue, dated for 1939 and of the type associated with the U-Boats, with brushed aluminium stepped breech 9in. barrels, long receiver with top, centrally mounted three-position selector, the central position marked 'DOPPEL-SCHUSS', polished aluminium frame marked with a small eagle-swastika and 'M' (badly stamped), side-mounted safe, two-piece chequered walnut grips, under-lever opening forwards of the trigger-guard and smooth walnut beaver-tail fore-end with frontal hand-stop, overall length 15in., weight approximately 5 1/2lbs.. S1 - Sold as a Section 1 Firearm under the 1968 Firearms Act ** Please note this item is subject to 20% VAT on the hammer price.
Loading...-
150142 item(s)/page