We found 4065 price guide item(s) matching your search

"A brass lantern clock, with a twin fusee striking movement, the backplate stamped ‘CV 278’ to a circular floral engraved dial, inscribed ‘Thos. Shilling BOUGHTON’ to turned columns, finials and feet, pierced frets, one engraved, the bell inscribed ‘THIS CLOCK was presented to THE INSTITUTE OF METALS in 1918 by SIR GEORGE BEILBY President 1916 -1918,’ 15.75in (40cm) h."

A brass Lantern Clock with Alarm. Thomas Knifton, London. The 6.125in diam silvered chapter ring with Roman numerals, half hour markers and inner circle of fifteen minute intervals, the centre engraved with tulips and signed 'Thomas Knifton at the Lothbury Londini Fecit', the silvered alarum dial with Arabic numerals and with single pierced iron hand, the two train rope driven movement with balance wheel escapement striking at the hour on the top mounted bell, the alarm mechanism mounted externally on the back plate, the case with pierced frets, vase shaped finials, iron hoop and spikes (with six brass cased weights)

A 17th Century style brass Lantern Clock. The 6.5in diam dial with silvered chapter ring, Roman numerals, lozenge half hour markers, inner circle of fifteen minute divisions, signed in the centre 'Thos Moore, Ipswich', the two train movement with anchor escapement and outside countwheel, striking on a top mounted bell, the case with pierced frets, turned finials, iron hoop and later spikes. 14.5in high (lacks pendulum and bell)

A modern bracket clock, and a Smith's lantern clock (2)

A rare 20thC electric timepiece, by the Eureka Clock Company Ltd., London, patent no. 14614-1906, no. 2778, modelled in the form of a lantern clock, with strapwork bell frame and bell, within pierced and engraved dolphin pediments, the chapter ring having Roman numerals, with inside quarter's track and pierced steel hands, centred by a bevelled glass panel showing a visible movement, of typical form, with oversized and compensated pendulum, with battery mounting to the back door; 16" high.

A 30 hour lantern clock, mainly dating from the 18th century with traditional movement subject to restoration and modifications, anchor escapement, locking plate striking mechanism, turned bell bracket supports with replacement bell, rope drive, The clock is fitted with a 10 inch square dial having cherub spandrels supporting crowns, engraved chapter ring bearing makers name Richard Weller of Eastbourne with steel single hand, pendulum and weight.

A LATE 19TH/EARLY 20TH-CENTURY BRASS CASED 8-DAY MANTEL CLOCK of 17th-century lantern clock design, with Roman hours chapter ring, the twin-fuseé movement striking the hours, on mahogany plinth, 46.5cm, (18.25in) high overall

A 17th century style brass lantern clock, with high domed bell, with entwined dolphin frets, the applied silvered chapter ring marked in Roman numerals, fitted with an 8-day French chiming movement, 29cm (11 /2in)

The remnants of an early 18th century provincial brass wing lantern clock, of posted construction with outside countwheel strike and space between the trains for short verge pendulum, now with anchor escapement and conversion to two hands, finials, feet, bell and cage, doors, backplate and dial lacking, 18cm high; and a First Period part lantern clock dial centre and chapter ring with fine repeating rose engraved decoration, (2).

17th century style brass lantern clock of posted construction, the bell mounted within the domed cage above the dial with engraved centre, applied silvered chapter ring, double fusee movement, 42cm

A lantern clock the eight day movement with double chain driven fusee mechanism striking on the hour and with ting tang quarters in a traditional bell surmounted case the chapter ring inscribed John Fordham Dunmow No 125, raised on ball feet, 15 inches glass dome

An early 18th century brass lantern clock, with floral engraved Roman dial and ebonised bracket, 15ins

17th Century style brass cased lantern clock having pierced top panel decorated with dolphins - eight day movement, 29cm high

Edwardian mahogany and inlaid Mantel Clock, circular dial and movement and a reproduction miniature Lantern Clock, (2).

A brass lantern clock with French movement

A STRIKING LANTERN CLOCK the French eight day movement having a lever escapement and striking the hours and half hours on a bell, the brass dial having floral engraving to the centre and corners, the chapter ring engraved with black Roman numerals and the name 'Smorthwaite in Colchester', and with decorative blued steel hands, having an engraved spandrel above the dial and two further plain ones to either side, height 37cm.

A BRASS REPRODUCTION LANTERN CLOCK, 10" high

A brass lantern clock, the chapter ring with Roman numerals and signed Robt. Fox, Uppingham, with a single hand to indicate the hours, the movement striking on a bell, the corners with turned columns and finials, the top with pierced panels to the sides.

A rare 20th Century Electric Timepiece, Eureka Clock Co Ltd, London, Patent No 14614/1906, No 2247, modelled in the form of a Lantern Clock with strapwork bell frame and large silvered bell to pierced and engraved dolphin pediment with engraved mask and three hinged doors raised on four ball feet, the over sized 6.75" Roman chapter ring with inside quarters track and pierced steel hands, centred by a bevelled glass panel showing a visible movement, the movement of typical form with oversized and compensated pendulum with battery mounting to the back door, height 16.25"

Brass lantern style clock, circular dial engraved and with Roman numerals, 26cm high.

A brass 17th century style lantern clock case, the top with vase finial decoration of entwined sea serpents, bell frets, 30cm (12in) high

A Brass Lantern Clock, the dial floral engraved, 19th century, 16ins, double weighted

A 17c style brass lantern clock of typical style with single hand, brass dial, two weight driven movement, 36 cms. [bears inscription "Edward Walden of Horntone"].

A George II brass lantern clock, of posted construction with original verge escapement and countwheel strike on a bell mounted within the domed cage above, the 7 inch brass break-arch dial with applied Roman numeral chapter ring with lozenge half-hour markers and Indian mask pattern cast spandrels, the arch with circular boss signed 'Nicholas Lambert, London' flanked by conforming mounts with original? brass side doors and iron plate to rear, alarm and side frets lacking, hand and bell replaced otherwise in very original condition, 38cm high. Nicholas Lambert is recorded in Britten's 'Old Clocks & Watches and their Makers' as working in London circa 1750-70.

A brass lantern clock circa 1700, of posted construction with original verge escapement and countwheel strike on a bell mounted within the domed cage above, with a 7 inch square brass dial applied with Roman numeral chapter ring with stylised sword hilt half-hour markers and engraved 'Jn'o Hall, London' to lower edge, the angles with winged cherub head cast spandrels, with foliate cast frets and later brass side doors and hanging hoop with spurs to rear, 38cm high.

An early 20th century brass lantern clock, maker Dimmer of Southsea, with silvered Roman numeral chapter ring, 31cm high

An eight day lantern clock with passing strike and bracket

A BRASS LANTERN CLOCK.

Reproduction brass lantern clock, the dial named for Thomas Moore of Ipswich, complete with pendulum and single weight, 14in (35.5cm) high

A brass lantern clock, with engraved dial and scroll crestings in 17th century style, complex quarter-striking movement with twin-fusees and anchor escapement, 15in.

A 17TH CENTURY STYLE BRASS LANTERN CLOCK with bell and pierced dolphin mounts, circular dial and Roman numerals, fuse mechanism, 15" high.

A lantern pattern clock, a brass candlestick and two small silver candlesticks

A 17th Century Style Brass Lantern Clock, 30 cm

A LATE 17TH CENTURY STYLE BRASS LANTERN CLOCK, marked Nicholas Snowe, Sarum Fecit, pierced armorial case with steel bell and single finger, on an oak wall bracket. 15" High.

A LANTERN CLOCK by Thomas Watts, Lavenham, with anchor escapement, circular brass dial with enamelled Roman numerals, brass case incorporating domed bell top, pierced and chased surmounts and turned feet, 12" high (no weights or pendulum)

A BRASS LANTERN CLOCK with anchor escapement, the dial chased with dolphins in chased brass case, the domed bell top with finial, turned corner columns and feet, late 19th/ 20th century, 15" high

A 17TH CENTURY STYLE BRASS LANTERN CLOCK with fusee mechanism, and engraved circular dial, signed John Ebsmorth, London, 15" high overall.

A brass lantern clock, the thirty-hour posted frame movement with adapted anchor escapement and countwheel strike, the dial with single hand and Roman numerals, the case with four four turned pillar supports with urn finials beneath a pierced gallery with panels of fish and flowers, the front section inscribed Nathaniel C6cke turned pillar, 37cm high

A brass lantern clock circa 1650, of posted construction, originally with balance wheel escapement, now with early conversion to anchor, with countwheel strike on a bell mounted within the domed cage above, the replaced? dial with tulip engraved centre within a narrow 6.25 inch Roman numeral chapter ring, with original iron hand, removable side doors and brass backplate applied with spurs beneath hanging loop, replacements and restorations, 39cm high; with later pendulum and weight. The distinctive baluster turning of the arbors is reminiscent of the work of Peter Closon, see White, George 'The English Lantern Clock' page 102. The countwheel also bears the 'matchstick man' foundry mark on its inner surface.

A 17th century style brass lantern clock, of posted construction with verge escapement and countwheel strike on a bell mounted within the domed cage above, the dial with tulip engraved centre signed 'Dent, London, England' within an applied silvered Roman numeral chapter ring with trident half-hour markers, with blued steel hand and removable side doors, 38cm high; with wall bracket and original instruction booklet.

A 17th century style small brass lantern clock, early 20th century, the French eight-day bell-striking carriage clock movement with tulip engraved brass dial applied with silvered Roman numeral chapter ring, in a traditional posted case with domed superstructure housing the bell, 30cm high.

A 17th century style brass miniature lantern clock, early 20th century, the eight-day timepiece movement with platform lever escapement, with engraved dial signed 'Smiths' applied with Roman numeral chapter ring, in a traditional posted case with domed superstructure housing a bell, 25cm high.

A brass lantern clock circa 1690, of posted construction with verge escapement and countwheel strike on a bell mounted within the domed cage above, the dial with tulip engraved centre signed 'Thomas Power, Wellingborow' within an applied 6.5 inch Roman numeral chapter ring with trident half-hour markers, with replaced iron hand, side doors and brass backplate, movement with restorations, 37cm high. Thomas Power is recorded in Brittens 'Old Clocks and Watches and their Makers' as working in Wellingborough circa 1700.

A good brass wing lantern clock circa 1710, of posted construction with verge escapement and pendulum swinging between the trains, with countwheel strike on a bell mounted within the domed cage above, the dial with central alarm disc to the foliate engraved centre within an applied 7.25 inch Roman numeral chapter ring with fleur de lys half-hour markers and signed 'Jn'o Crucefix, London' to lower edge, with steel hand, winged side doors, iron backplate, hanging loop and spurs, alarm lacking, 39cm high. John Crucefix is recorded in Britten's 'Old Clocks and Watches and their Makers' as working 1689-1714 an example of his work resides to Stirling Castle.

A brass lantern clock, of posted construction with anchor escapement and countwheel strike on a bell mounted within the domed cage above, the dial with tulip engraved centre signed 'Jn'o Culliford, Bristoll' within an applied 6.25 inch Roman numeral chapter ring with stylised sword hilt half-hour markers, with brass hand, removable side doors and hanging hoop with spurs to rear, frame and dial circa 1690, movement mid 20th century, 38cm high; with wall bracket, weight and pendulum.

An early brass Lantern Clock with engraved dial inscribed Nicholas Coxiter, Londini, single hand, pierced coat of arms surmounts, striking on bell, with wall bracket

A Late 17th Century Brass Lantern Clock signed James Delaunce Froome Fecit, having a verge escapement and striking a bell. The centre engraved with decoration and encircled by a silvered chapter ring, with fretted pediments and finialled brass corner pillars raised on turned feet, 15 ins (38 cms) in height.

A Victorian brass lantern clock of typical form with domed bell cover, fretwork sides, brass chapter ring with Roman numerals, engraved centre, twin winding holes for a double chain driven fusee movement with anchor escapement and striking on a bell, the whole raised upon turned supports, height 39cm

A 17TH CENTURY BRASS LANTERN CLOCK with circular engraved dial, roman numerals and signed William Shaw Diss, bell and weight, altered and converted, 15 1/2" high.

Billy Dorling, St Edmund's Bury, a 19th century lantern clock, the eight day twin fusée movement striking on the bell surmounting the case between pierced foliate cresting, the brass chapter ring on one side doors on the other above four ball feet, 37cm high

An Early 18th Century Brass Lantern Clock, circa 1720, the case with slender corner columns, urn finials, dolphin frets and ball feet, top mounted bell, iron back with wall spikes, 6 1/2 inch chapter ring with floral engraved centre, single hand, the posted movement with anchor escapement and outside countwheel strike on top mounted bell, with later adaptations, 38m high

A late Victorian brass 'lantern' clock, with traditional case and movement striking on bell, 14.5ins

A Continental brass ticket clock, with two sets of ivorine Arabic numeral hinged leaves within glazed cylindrical drum case, 13cm high excluding handle; and a spring driven diminutive brass lantern timepiece circa 1930s, 24cm high, (2).

A reproduction brass lantern clock, with a single fusee striking movement, 37cm

A 19th century brass lantern clock, the arched pierced panels decorated with fish over Roman numeral dial, on bun feet, 31cm

Antique 17th Century style lantern clock with later brass case with crown top and pierced panels and circular face, height 37cm

A 1920's brass lantern clock, with French movement, 10.5ins

A Victorian brass lantern clock, 19th century, in 17th century style, with turned finial and bell above four pierced brass entwined dolphin crestings over a 6.5'' engraved brass dial with roman numerals, the case enclosing a double fusee movement with anchor escapement, raised on turned brass feet, 15'' high

A 17th century design brass lantern clock, the Roman dial engraved with tulips and maker's name 'Thomas Birch in ye Long Walk neere ye home Hospitall ondon Fecit', with twin fusee movement, on bun feet, 38cm high

A brass cased lantern clock, striking on a bell, the dial with black Roman numerals, by Thos. Moore, Ipswich, with a pendulum and a key.